Palladium catalyzed thiol cross-coupling of cystein derivatives with aryl and alkenyl halides

Palladium catalyzed cystein thiol cross-coupling reactions with aryl and vinyl halides have been investigated: Pd₂dba₃-CHCl₃ and dppf are the key choice in these reactions. The role of the base in these reactions was also questioned: it has been shown that base can be replaced by an HX-scavenger such as propylene oxide.     

Manganese-catalyzed cross-coupling reaction between aryl Grignard reagents and alkenyl halides

Aryl Grignard reagents react stereospecifically with alkenyl halides in the presence of manganese chloride (10%) to afford good yields of cross-coupling products.     

Metalated aziridines for cross-coupling with aryl and alkenyl halides via palladium catalysis

The palladium-catalyzed coupling of an aziridinylzinc chloride intermediate with alkenyl and aryl halides has been demonstrated. The method provides products with retention of aziridine stereochemistry. The utility of the coupling procedure is illustrated in the synthesis of structures related to l-furanomycin.     

Dimer formation in the reaction of aryl halides catalyzed by nickel complexes

The synthesis of diaryls catalyzed by electrochemically generated zero-valent nickel with 2,2-diapyridyl as the ligand was carried out from aryl halides in high yield. Feasibility was demonstrated for synthesizing the catalyst itself by the anodic dissolution of nickel in the presence of 2-bromopyridine in a diaphragmless cell.A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, 420083 Kazan. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 7, pp. 1674–1676, July, 1992.     

Palladium-catalyzed cross-coupling reaction of tricyclopropylbismuth with aryl halides and triflates

The palladium-catalyzed cross-coupling reaction of tricyclopropylbismuth with aryl and heterocyclic halides and triflates is reported. The reaction tolerates numerous functional groups and does not require anhydrous conditions. The method was successfully extended to the cross-coupling of triethylbismuth.     

Palladium-catalysed cross-coupling of 2-trimethylsilylpyridine with aryl halides

Palladium-catalysed cross-coupling of 2-trimethylsilylpyridine with aryl halides in the presence of stoichiometric silver(I) oxide, and catalytic TBAF allows the rapid preparation of the corresponding pyridin-2-ylaryl compounds in moderate to good yields under mild thermal conditions.     

Synthesis of nickel-salicylideneimines complexes and catalyzing cross-coupling reaction of aryl halides and Grignard reagents

A series of nickel-salicylideneimines complexes were prepared in wild way and these complexes were stable to air and moisture. The nickel-salicylideneimines complexes exhibited good activity in catalyzing Grignard reagents with aryl halids to biphenyl derivatives and the more fluorine atoms contained by N-substituted benzene moiety could function the better activity.     

Stereospecific cross-coupling between alkenylboronates and alkyl halides catalyzed by iron-bisphosphine complexes

A stereospecific and high-yielding cross-coupling reaction between alkenylboron reagents and alkyl halides is described. The reaction has been achieved by using well-defined iron-bisphosphine complexes such as 1b FeCl(2)(3,5-t-Bu(2)-SciOPP), which was recently developed by the authors' group. Various nonactivated alkyl bromides and chlorides possessing a base/nucleophile-sensitive functional group can participate in the cross-coupling, demonstrating its utility for stereoselective synthesis of functional molecules bearing a carbon-carbon double bond.     

Pd-catalyzed boronations and cross-coupling reactions of aromatic cobaltadithiolene complexes with aryl halides

The Pd-catalyzed reaction of [CpCo(S2C2(Ph)(Bpin))] (1, Bpin = 4,4,5,5-tetramethyl-1,3,2-dioxaboronate) with 1-iodonaphthalene or 2-bromothiophene gave the cross-coupling product [CpCo(S2C2(Ph)(Ar))] (Ar = 1-Np (4) or 2-Th (5)), although an early paper described the reaction of 1 with 3-bromopyridine or 9-bromoanthracene (Ar = 3-Py (2) or 9-Anth (3)). The boronation of the brominated precursor [CpCo(S2C2(p-C6H4Br)(H))] (7) with Bpin-H in the presence of Pd catalyst gave the expected boronated product [CpCo(S2C2(p-C6H4Bpin)(H))] (8) but also underwent an unexpected direct boronation on the dithiolene carbon to form [CpCo(S2C2(p-C6H4Br)(Bpin))] (9). The brominated complex 7 or [CpCo(S2C2(Ph)(p-C6H4Br))] (10) was synthesized by thermal reaction and the microwave-enhanced reaction relatively gave better yield with shorter reaction time than that of the conventional heating reaction. The cross-coupling reactions of the boronated or [CpCo(S2C2(Ph)(p-C6H4Bpin))] (11) with aryl halides successfully produced the corresponding cross-coupling products such as [CpCo(S2C2(p-C6H4Py)(H))] (12) or [CpCo(S2C2(p-C6H4Anth)(H))] (13) from 8 and [CpCo(S2C2(Ph)(p-C6H4Py))] (14) from 11. The structures of 7, 9, 11, 12, 13 and 14 were determined by X-ray diffraction studies. Electronic absorption maxima (λ_max) due to dithiolene LMCT in dichloromethane solution can be modified in the range of 574-602 nm by a substituent effect on the dithiolene ring. Redox potentials obtained from CV measurement were also reported.     

Ligand free palladium catalyzed decarboxylative cross-coupling of aryl halides with oxalate monoester salts

Ligand free Pd-catalyzed decarboxylative cross-coupling of potassium oxalate monoester and derivatives with aryl iodides and bromides is described. Functionalized aromatic esters can be efficiently synthesized via this method with only 1.0 mol % Pd(OAc)₂ catalyst without any phosphine ligand. This method illustrates an inexpensive and operationally simple method for the preparation of aromatic esters and acids, which is especially beneficial for a large scale synthesis.     

Open air O-arylation reaction of phenols with aryl halides catalyzed by polymer-anchored copper(II) complexes

Two copper complexes were synthesized from macroporous chloromethylated polystyrene beads. The first one was prepared by sequential attachment of imidazole and copper acetate with chloromethylated polystyrene-divinyl benzene copolymer, and the second one was prepared from 4-vinylpyridine and copper acetate with chloromethylated polystyrene-divinyl benzene copolymer. These catalysts showed excellent catalytic activity in O-arylation reaction of aryl halides with phenol in dimethylsulfoxide using potassium carbonate at 130 °C under open air conditions to give diaryl ethers in high yields. Less reactive aryl bromides and aryl chlorides have also been shown to react with phenols to give good yields of the diaryl ethers. The effects of various parameters such as solvent, catalyst from different copper salt and base on the reaction system were studied. The reaction is applicable to a wide variety of substituted aryl halides and phenols with different steric and electronic properties. These catalysts were recovered by simple filtration, and the reusability experiments showed that these catalysts can be used five times without much loss in the catalytic activity.     

Synthesis of alkenyl sulfides through the iron-catalyzed cross-coupling reaction of vinyl halides with thiols

We report here the iron-catalyzed cross-coupling reaction of alkyl vinyl halides with thiols. While many works are devoted to the coupling of thiols with alkyl vinyl iodides, interestingly, the known S-vinylation of vinyl bromides and chlorides is limited to 1-(2-bromovinyl)benzene and 1-(2-chlorovinyl)benzene. Investigation on the coupling reaction of challenging alkyl vinyl bromides and chlorides with thiols is rare. Since the coupling of 1-(2-bromovinyl)benzene and 1-(2-chlorovinyl)benzene with thiols can be performed in the absence of any catalyst, here we focus on the coupling of thiols with alkyl vinyl halides. This system is generally reactive for alkyl vinyl iodides and bromides to provide the products in good yields. 1-(Chloromethylidene)-4-tert-butyl-cyclohexane was also coupled with thiols, giving the targets in moderate yields.     

Organic halide-ethylene growth reaction catalyzed by ruthenium complexes

Ru(CO)₃(PPh₃)₂ and a variety of other zero-valent ruthenium complexes promote the reaction of iodoalkanes with ethylene to produce higher molecular weight 1-iodoalkanes. The chemistry is best explained by the intermediacy of alkyl radicals generated by reaction of the ruthenium complexes with iodoalkanes. With the exception of α-chlorotoluene, organic bromides and chlorides do not undergo the growth reaction.     

Palladium-catalyzed denitrogenative cross-coupling of aryl halides with arylhydrazines under mild reaction conditions

Transition Metal Chemistry - A greener approach for the synthesis of various functionalized biaryl frameworks in good to excellent yield through palladium-catalyzed denitrogenative cross-coupling...     

Palladium-catalyzed cross-coupling reactions of 2-indolyldimethylsilanols with substituted aryl halides

[reaction: see text] A mild and general cross-coupling reaction of 2-indolylsilanols has been developed. The experimental variables that lead to successful coupling are (1) the use of sodium tert-butoxide as the activator, (2) the use of copper(I) iodide in stoichiometric quantities, and (3) the use of Pd2(dba)3.CHCl3 as the catalyst. Under these conditions N-(Boc)-2-indolyldimethylsilanol reacts with a variety of aromatic iodides to afford the coupling products in good yield (70-84%).     

Direct guanidinylation of aryl and heteroaryl halides via copper-catalyzed cross-coupling reaction

A modified Ullmann reaction using p-methoxybenzyl (PMB) guanidine as guanidinylation agent yielded various aryl and heteroaryl guanidines in good yields.     

Free porphyrin catalyzed direct C-H arylation of benzene with aryl halides

A general procedure for free porphyrin catalyzed direct C-H arylation of benzene was demonstrated. This air tolerant, transition-metal-free process provides a promising system for cheap and efficient synthesis of biaryls in a user-friendly approach.