混凝土的一种标量损伤弹塑性本构模型

荷载作用下材料性能的劣化是混凝土结构的微观损伤机理,其宏观表现为结构刚度的折减和承载力的降低。论文推导了基于不可逆热力学过程的弹塑性标量损伤本构,给出时间离散的屈服准则。采用基于向后Euler法的应力更新算法——两步图形返回的最近点投影法,推导了满足迭代结果收敛假设的塑性参数及算法刚度张量,给出了空间梁单元本构积分算法的Jacobi矩阵。将模型用于混凝土简支梁的承载力试验模拟,与计算数据对比表明了模型和算法的合理性和有效性。     

单轴压缩下断续节理岩体动态损伤本构模型

断续节理将对工程岩体的强度及变形等力学特性产生显著影响,损伤力学中视节理为岩体的一种宏观损伤,因而采用损伤张量来刻画其对岩体的影响。目前学术界提出了用节理的几何、强度及变形等3类参数来描述节理的物理力学性质,而目前的岩体损伤张量计算方法都只涉及前2类参数,均没有涉及其变形参数即法向及切向刚度。为此,在前人研究的基础上,基于断裂及损伤理论提出了考虑节理法向及切向刚度的单轴压缩下单条断续节理引起的损伤张量计算公式,进而通过考虑节理间相互作用给出了单组单排或多排节理岩体损伤张量计算公式。其次,以岩石细观动态损伤模型为基础,结合宏细观损伤耦合观点提出了一个能够同时考虑节理几何、强度及变形参数的断续节理岩体动态损伤本构模型。最后,利用该模型讨论了节理参数及载荷应变率等对岩体动态力学特性的影响,认为节理长度减小及摩擦角增大将导致岩体动态峰值强度及弹性模量增大;岩体动态峰值强度及弹性模量则随着节理法向及切向刚度的增大分别减小或增大;而当节理法向及切向刚度按照同一比例增大时,岩体动态峰值强度及弹性模量则是增大的。岩体动态峰值强度与载荷应变率呈正相关。     

A damage constitutive model for sliding friction coupled to wear

Several new constitutive models are formulated for the planar interface of a soft body sliding on a rigid soil, describing stick-slip phenomena due to friction, and wear due to abrasion. Attention is focused on damage at the interface, by neglecting any interaction with damage of body and any propagation of damage inside the body. Models are formulated in the general framework of the Thermodynamics of the irreversible processes and account for suitable defined internal variables of phenomenological type, namely gap, isotropic friction hardening and wear. The main feature of the new presented models is that the formulation of the wear process at the interface is obtained in the contest of Damage Mechanics, and it is based on the formal analogy between abrasion of a soft body and ductile damage of an elastic-plastic material. By following this approach, a scalar wear field, an effective stress and appropriate state and dissipation potentials are defined, able to describe a tangential isotropic wear process due to stick-slip and to hardening mechanism. Both cases of linear and nonlinear friction hardening are formulated; moreover, wearable and no-wearable bodies are considered. Numerical results relevant to one-dimensional problems are illustrated for monotonic, forward-backward and cyclic displacement time-histories, showing evolution for stress, gap and wear. Results furnished by different models are compared and discussed.     

混凝土率型内时损伤本构模型

混凝土是一种典型的率敏感材料,为了更好地描述混凝土结构在动力、冲击荷载作用下的强度和变形特征,本文结合内时理论和损伤理论建立了一种考虑混凝土率效应的内时损伤本构模型。该模型的特点:将混凝土材料的受力软化效应分解为密实状态的塑性效应和由微裂缝扩展引起的刚度退化效应。前者由内时理论来描述,这使该模型摆脱了一般弹塑性模型中屈服面的概念,从而更符合混凝土的变形特性,并且简化了非线性计算过程;后者由损伤理论来描述,根据混凝土的动力试验结果建立了增量型的损伤演变方程,从而使该模型能够较好地反映混凝土的动力特性。最后,应用本文建议的模型对一钢筋混凝土简支梁进行了非线性分析,结果表明:当结构承受快速荷载作用时,应变率对结构的受力性能影响较大,在进行结构分析时必须予以考虑。     

A damage directional constitutive model for Mullins effect with permanent set and induced anisotropy

A stress softening, commonly known as the Mullins effect, is observed usually in filled rubberlike materials after the first load. Experimental observations have shown that the Mullins effect induces a permanent set and some anisotropy. In order to account for these two features, a strain energy density is proposed, which is based on material directions and coupled with a theory for network alteration. The constitutive law is based on a macromolecular approach, and the network alteration theory is motivated physically. The model has been compared to experimental data successfully.     

混凝土冻融损伤本构模型研究

基于各向同性连续损伤力学理论,以损伤条件下的弹性模量和泊松比为变量,基于Ottosen理论模型建立了混凝土冻融损伤破坏准则,并以Ottosen本构理论模型为基础,利用建立的冻融损伤破坏准则构建了混凝土冻融损伤本构模型,并编制了本构模型有限元程序,经过试验验证模型计算结果较为准确,为有限元计算和冻融作用后混凝土结构模拟应...     

基于TCK模型的非贯通节理岩体动态损伤本构模型

提出在岩体动态损伤本构模型中应同时考虑宏、细观缺陷;基于能量原理和断裂力学理论推导得出了同时考虑节理几何及力学特征的宏观损伤变量(张量)的计算公式;基于综合考虑宏、细观缺陷的复合损伤变量(张量)及完整岩石动态损伤Taylor-Chen-Kuszmaul(TCK)模型,建立了相应的单轴压缩下节理岩体动态损伤本构模型;利用该模型讨论了节理内摩擦角及节理长度对岩体动态力学特性的影响规律。研究表明,试件动态峰值强度随着节理内摩擦角的增大而增大,随着节理长度的增加而减小。     

Investigation on elasto-plastic constitutive model coupled with damage for localization phenomena

On the basis of existing plasticity-based damage model for plasticity coupled with damage for localization analysis, constitutive parameter identification was carried out through a series of numerical tests at local level. And then improvements were made on the expressions of the evolution laws of damage. Strain localization phenomena were simulated with a typical double-notched specimen under tensions. Numerical results indicate the validity of the proposed theory.     

一种岩石损伤本构模型在地下强爆炸中的应用

为了描述地下爆炸波的传播,建立了一种考虑塑性硬化、剪胀和损伤软化效应的岩石本构模型,并应用于地下强爆炸自由场的数值计算,获得的速度和位移波形以及峰值速度衰减曲线等与国外地下试验测量数据和同类计算相比十分接近,从而验证了本构模型的有效性。     

Coupled viscoplasticity damage constitutive model for concrete materials

A coupled viscoplasticity damage constitutive model for concrete materials is developed within the framework of irreversible thermodynamics.Simultaneously the Helmholtz free energy function and a non-associated flow potential function are given, which include the internal variables of kinematic hardening,isotropic hardening and dam- age.Results from the numerical simulation show that the model presented can describe the deformation properties of the concrete without the formal hypotheses of yield criterion and failure criteria,such as the volume dilatancy under the compression,strain-rate sen- sitivity,stiffness degradation and stress-softening behavior beyond the peak stress which are brought by damages and fractures.Moreover,we could benefit from the application of the finite element method based on this model under complex loading because of not having to choose different constitutive models based on the deformation level.     

A dynamic damage constitutive model for a rock mass with non-persistent joints under uniaxial compression

Most problems faced by the practicing rock mass engineering involve the evaluation of rock mass dynamic strength and deformability. As part of a rock mass, the mesoscopic flaws such as the microcracks and the macroscopic ones such as the joints both inherently affect the rock mass dynamic strength and deformational behavior. Nearly none of the existing models can handle the co-effect of these two kinds of flaws on the rock mass dynamic mechanical behavior. This study focusses on the rock mass with multi-sets of non-persistent joints and establishes a mathematical model accounting for the anisotropy in dynamic strength and deformability induced by the joints. Accordingly, an approach incorporating the existing models or methods to enable perfect simulation of the dynamic stress-strain relationship of a rock mass is proposed, in which the joint geometrical parameters such as the joint length and dip angle, the strength ones such as the joint internal friction and the deformational ones such as the joint normal and shear stiffness can all be taken into account. In order to investigate the validity of the proposed model, a series of calculation examples have been made and the results fits very well with the theoretical ones.     

Pseudo-potential of elastoplastic damage constitutive model and its application

Damage pseudo-potentials, from which the damage evolution equations can be acquired, are usually expressed as scalar functions of irreversible thermodynamic variables. A lower potential for an action with the dissipation property corresponds to a Helmholtz free energy function in classical mechanics; therefore, pseudo-potential acts as a cornerstone of the damage constitutive relationship. According to the analysis on state and process of a damage system, the authors study the connection between damage action, pseudo-potential and free energy function. Next a general method to define the pseudo-potential of damage process is discussed. The discrete elementary equations of continuum damage mechanics are derived from the action functional. Subsequently, the numerical implementation of the aforementioned damage model is given. Comparison between experimental evidences and numerical results verifies the soundness of the theoretical model and the numerical framework.     

基于微态方法的耦合韧性损伤的弹塑性本构模型

基于广义连续介质力学提出了一个热力学一致性的耦合微态韧性损伤的弹塑性本构模型。该模型遵循Forest的微态方法,在有限变形中提出引入额外的微态损伤因子及其一阶梯度以考虑材料的内部特征尺度。通过广义虚功原理得到了微态损伤的补充控制方程,对亥姆霍兹自由能进行扩展,得到了新的包含微态损伤变量的损伤能量释放率,在微态损伤的正则化作用下,采用隐式迭代更新局部损伤和应力等状态变量。基于Galerkin加权余量法,推导了以传统位移和微态损伤为基本未知量的有限元列式。利用该数值模型,对DP1000材料的单向拉伸实验和十字形零件的冲压实验进行了应变局部化与材料断裂的有限元分析。结果表明,该微态弹塑性损伤模型可以得到一致的有限元模拟响应曲线并收敛到实验曲线,从而避免发生网格依赖性问题。     

A quasi-flow constitutive model with strain-rate dependence

In this paper, the proposed is a quasi-flow constitutive model with strain-rate sensitivity for elastic plastic large deformation. The model is based on the Quasi-flow Corner theory, and is suitable for the sheet metal forming process simulation with a variable punch machine velocity. Uniaxial tensile tests and deep-drawing tests of a circular blank with square punch are carried out and numerically simulated. The consistency between the experimental and the numerically simulated results shows the validity of the present new constitutive model. The project supported by the Scientific Foundation of National Outstanding Youth of China (10125208), the National Natural Science Foundation of China (19832020), and the National Education Committee of China     

A viscoplastic constitutive model with effect of aging

It is recognized experimentally that differences in plastic flow stress due to the change in strain rate of SUS304 stainless steel are found to decrease after cyclic preloadings, but minimal change is observed in relaxation properties. Therefore, viscosity function based on tensile stress–strain properties differs from that obtained from relaxation behavior. For such case, the existing visco-plastic constitutive concept, such as the so-called overstress model where only viscosity is taken into consideration, has a poor capability in predicting the time-dependent mechanical properties systematically. A new viscoplastic constitutive concept is presented to analyze the phenomenon. In the constitutive concept, the dynamic strain aging even at room temperature, as well as viscosity, are introduced as the dominant factors of the time-dependent plastic deformation. An experimental technique is proposed and some experimental results are presented to estimate the effects of aging and viscosity separately on the time-dependency of a SCM435 low alloyed steel under tensile loading. The proposed constitutive model with aging is verified for the systematical predictions of both plastic flow properties and relaxation behavior of the SCM435 low alloyed steel.     

水泥砂浆的一个热粘弹性率型损伤本构模型

利用SHPB实验系统及自行研制的混凝土类材料快速高温加热设备,对水泥砂浆试件进行了不同 温度(20~600℃)和3种冲击速度下的实验,得到了不同温度和冲击速度下水泥砂浆试件的应力应变关系曲 线。基于ZWT粘弹性本构模型,并且考虑高温下水泥砂浆损伤演化规律都服从Weibull分布,提出了一个水 泥砂浆的热粘弹性率型损伤本构模型。通过数据拟合,获得了本构模型的相关参数,结果表明:理论预测和实 验结果吻合良好。     

层合板冲击损伤的PD率效应本构模型分析

从近场动力学(简称PD)理论的PMB材料模型出发,结合Kelvin-Voigt粘弹性固体模型,建立PD率效应本构模型。采用LAMMPS软件模拟了环氧树脂板、纤维增强复合材料单向层板和多向铺层层合板受冲击的情况。通过分析各板的冲击损伤,探索纤维对板的增强作用。同时,分析了不同冲击速度下层合板上下表面的损伤程度,初步探讨了从低速碰撞到高速冲击过程中复合材料层合板的破坏机理及规律。     

A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation

The present work focuses on the development of a physically-based model for large deformation stress-strain response and anisotropic damage in rubber-toughened glassy polymers. The main features leading to a microstructural evolution (regarding cavitation, void aspect ratio, matrix plastic anisotropy and rubbery phase deformation) in rubber-toughened glassy polymers are introduced in the proposed constitutive model. The constitutive response of the glassy polymer matrix is modelled using the hyperelastic-viscoplastic model of [Boyce et al., 1988] and [Boyce et al., 2000]. The deformation mechanisms of the matrix material are accounted for by two resistances: an elastic-viscoplastic isotropic intermolecular resistance acting in parallel with a visco-hyperelastic anisotropic network resistance, each resistance being modified to account for damage effects by void growth with a variation of the void aspect ratio. The effective contribution of the hyperelastic particles to the overall composite behaviour is taken into account by treating the overall system in a composite scheme framework. The capabilities of the proposed constitutive model are checked by comparing experimental data with numerical simulations. The deformation behaviour of rubber-toughened poly(methyl methacrylate) was investigated experimentally in tension at a temperature of 80 °C and for different constant true strain rates monitored by a video-controlled technique. The reinforcing phase is of the soft core-hard shell type and its diameter is of the order of one hundred nanometers. The particle volume fraction was adjusted from 15% to 45% by increments of 5%. The stress-strain response and the inelastic volumetric strain are found to depend markedly on particle volume fraction. For a wide range of rubber volume fractions, the model simulations are in good agreement with the experimental results. Finally, a parametric analysis demonstrates the importance of accounting for void shape, matrix plastic anisotropy and rubber content.     

A constitutive model of nanocomposite hydrogels with nanoparticle crosslinkers

Nanocomposite hydrogels with only nanoparticle crosslinkers exhibit extraordinarily higher stretchability and toughness than the conventional organically crosslinked hydrogels, thus showing great potential in the applications of artificial muscles and cartilages. Despite their potential, the microscopic mechanics details underlying their mechanical performance have remained largely elusive. Here, we develop a constitutive model of the nanoparticle hydrogels to elucidate the microscopic mechanics behaviors, including the microarchitecture and evolution of the nanoparticle crosslinked polymer chains during the mechanical deformation. The constitutive model enables us to understand the Mullins effect of the nanocomposite hydrogels, and the effects of nanoparticle concentrations and sizes on their cyclic stress–strain behaviors. The theory is quantitatively validated by the tensile tests on a nanocomposite hydrogel with nanosilica crosslinkers. The theory can also be extended to explain the mechanical behaviors of existing hydrogels with nanoclay crosslinkers, and the necking instability of the composite hydrogels with both nanoparticle crosslinkers and organic crosslinkers. We expect that this constitutive model can be further exploited to reveal mechanics behaviors of novel particle-polymer chain interactions, and to design unprecedented hydrogels with both high stretchability and toughness.     

基于各向异性损伤本构模型的砌体结构抗震分析

进一步完善了应力张量的线性变换方法,并将其应用于砌体材料本构模型的开发。在整体式有限元模型中,因不区分砌块和砂浆而将其视为匀质的连续材料,难以用受拉和受压两个损伤变量准确描述灰缝的II型滑移破坏。为解决这一问题,提出应再引入一个针对II型滑移破坏的损伤变量。基于以上研究工作,对砌体结构的振动台试验进行了模拟。模拟结果进一步验证了本文提出的弹塑性损伤本构模型的有效性,以及在进行结构非线性分析方面的优越性。由于本文提出的本构模型能够较为真实地描述砌体墙的破坏模式,因此使用该模型进行结构非线性分析,除了能够获取结构的位移和应力等反应外,还能较为准确地实时提供结构中的损伤分布状态信息,找出结构的薄弱部位,并据此合理地设计结构或进行相应的结构修复。