A new boron-selective resin derived from guar gum

A boron-selective resin has been prepared by cross-linking of a natural plant hydrocolloid (the polysaccharide guaran from guar seeds). Concentration and separation of boron can be achieved on this resin through completing of boron with the cis-hydroxyl groups in the polymer. The method has been applied to the determination of boron.     

Modification of Crosslinked Poly(styrene) Based Polymers for Boron-Specific Extraction

A new polymeric resin with glucose sulfonamide functions has been prepared for the extraction of boric acid. This poly (styryl sulfonamide) based resin has been demonstrated to be an efficient sorbent for the removal of boron. The resin had a boron loading capacity of 2.365 mmol.g⁻¹ and showed reasonably rapid sorption ability. Splitting of sorbed boron can be achieved by simple acid leaching (2M H₂SO₄).     

A family of main-chain polymeric Lewis acids: synthesis and fluorescent sensing properties of boron-modified polythiophenes

A new family of main-chain organoborane polymeric Lewis acids (PTh-BAr) that contain Lewis acidic boron groups embedded into a polythiophene backbone has been prepared under mild conditions through tin-boron exchange reaction. When phenyl and pentafluorophenyl groups are attached to boron, blue and green luminescence is observed, respectively, while the attachment of ferrocenyl substituents leads to a characteristic red color. The incorporation of readily accessible highly Lewis acidic groups into the conjugated polymer backbone provides an opportunity for sensing of Lewis basic substrates. For instance, treatment of the polymer containing phenyl substituents on boron with pyridine leads to efficient quenching of the fluorescence, while the polymer containing ferrocenyl groups changes color from dark red to light orange.     

The electronic structures of polymeric beryllium hydride and polymeric boron hydride

The band structure of linear polymeric beryllium hydride is here calculated by anab initio technique. The doubly-degenerate valence band has symmetry and is composed of a berylliump orbital and an antisymmetric combination of the appropriate hydrogen 1s orbitals. The Koopmans' ionization potential is calculated to be 16.1 eV and the direct band gap, found atX, is 15.2 eV. The charge distribution shows an electron drift of approximately 0.15 electrons from beryllium to the hydrogen atoms. The total energy calculation indicates that polymeric beryllium hydride is more stable than the monomer while polymeric boron hydride is less stable than the monomeric species. From the polymeric boron hydride system, an alternating-bond model is more stable than a symmetric bond model. The energy band structures of both models reveal that electron delocalization along the polymer chain is weak.     

Incorporation of N‐Methyl‐d‐glucamine Functionalized Oligomer into MIL‐101(Cr) for Highly Efficient Removal of Boric Acid from Water

Polymeric resins are practically important adsorbents in a wide variety of applications, but they generally suffer from low surface areas and limited functionalized adsorption sites owing to their closely compacted and tangled polymeric chains. A metal–organic framework (MOF)–polymer composite with enhanced adsorption capacity against the compacted polymeric resins was reported. The strategy to incorporate functionalized oligomer within the cavities of the MOF was demonstrated by the preparation of MIL‐101(Cr) incorporated with N‐methyl‐d ‐glucamine‐based organosiloxane polymer. The resulting MOF composite shows high efficiency for the removal of boric acid from water because of exceptionally high loading of functional groups responsible for the boron adsorption. This material offers promising perspectives for boron removal applications in seawater desalination.     

有孔虫中硼的分离及其正热电离质谱法测定

针对大洋钻探计划(0DP)钻孔中有孔虫数量少、硼含量低的特点，改进了硼特效树脂和阴、阳混合离子交换树脂相结合进行分离硼的方法，成功地实现了硼的分离，并且首次采用正热电离质语法测定了有孔虫中硼同位素的比值。由于硼的分离过程不产生同位素分馏，测定结果令人满意。     

Prediction of Boron–Boron Triple‐Bond Polymers Stabilized by Janus‐Type Bis(N‐heterocyclic) Carbenes

A class of polymeric compounds containing boron–boron triple bonds stabilized by N‐heterocyclic biscarbenes is proposed. Since a triply bonded B₂ is related to its third excited state, the predicted macromolecule would be composed by several units of an electronically excited first‐row homonuclear dimer. Moreover, it is shown that the replacement of biscarbene with N₂ or CO as spacers could change the bonding profile of the boron–boron units to a cumulene‐like structure. Based on these results, different types of diboryne polymers are proposed, which could lead to an unprecedented set of boron materials with distinct physical properties. The novel diboryne macromolecules could be synthesized by the reaction of Janus‐type biscarbenes with tetrabromodiborane, B₂Br₄, and sodium naphthalenide, [Na(C₁₀H₈)], similarly to Braunschweig’s work on the room temperature stable boron–boron triple bond compounds (Science, 2012 , 336, 1420).     

Polymeric herbicide–Montmorillonite composite: synthesis,characterization and release studies

The production of polymeric herbicide intercalated onto montmorillonite interlayer through the process of cation exchange, in order to produce chemically bound polymeric herbicide with clay, has been reported. This was carried out by cation exchange of clay with onium salts of preformed polymeric pentachlorophenyl methacrylate. The products were characterized by various techniques including IR spectroscopy and elemental microanalysis. The interlayer spacing was determined by X‐ray diffraction and thermogravimetric analysis (TGA) and calcination investigated the thermal stability. The morphology of the composite was investigated by scanning electron microscopy. The swelling behaviors in different solvents and release of pentachlorophenol (PCP) in different medium have been described. Copyright © 2001 John Wiley & Sons, Ltd.     

Determination of total,leachable and mobile boron in sedimentary rocks by ICP-AES

An ion exchange batch technique is described, which allows to determine the amount of mobile boron in geological material. Boron selective ion exchange resin IRA-743 (0.5 g, effective size 0.45 mm) was slurried together with 5 g sample (grain size smaller than 0.04 mm) at 70 °C in aqueous solution. After separating resin and suspension by sieving, elution was done in columns with 3N HCl. Boron was determined in the eluates by ICP-AES. Possible corrections for the iron interferences on the boron emission lines are discussed. The mobile boron content in the investigated shallow marine sedimentary rocks ranged between 5 and 10% of the total. It must be assumed that most of the boron in the shales is fixed in the lattice of the minerals.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Determination of the mode and efficacy of the cross-linking of guar by borate using MAS 11B NMR of borate cross-linked guar in combination with solution 11B NMR of model systems

The reaction product of boric acid and the polysaccharide guaran (the major component of guar gum) has been investigated by 11B NMR spectroscopy. By comparison with the 11B NMR of boric acid and phenylboronic acid complexes of 1,2-diols (HOCMe2CMe2OH, cis-C6H10(OH)2, trans-C6H10(OH)2, o-C6H4(OH)2), 1,3-diols (neol-H2), monosaccharides (L-fucose, mannose and galactose) and disaccharides (cellobiose and sucrose) it is found that the guaran polymer is cross-linked via a borate complex of two 1,2-diols both forming chelate 5-membered ring cycles ([B5(2)]), this contrasts with previous proposals. Based upon steric constraints we propose that preferential cross-linking the guaran polymer occurs via the 3,4-diols of the galactose side chain. The DeltaH and DeltaS for complexation of boric acid to cis- and trans-1,2-cyclohexanediol have been determined, from the temperature dependence of the appropriate equilibrium constants, and used in conjunction with ab initio calculations on model compounds, to understand prior conflicting proposals for guaran-boric acid interactions. 11B NMR derived pH dependent equilibrium constants and ab initio calculations have been used to understand the reasons for the inefficiency of boric acid to cross-link guaran (almost 2 borate ions per 3 monosaccharide repeat units are required for a viscous gel suitable as a fracturing fluid): the most reactive sites on the component saccharides (mannose and galactose) are precluded from reaction by the nature of the guar structure; the comparable acidity (pKa) of the remaining guaran alcohol substituents and the water solvent, results in a competition between cross-linking and borate formation; a significant fraction of the boric acid is ineffective in cross-linking guar due to the modest equilibrium (Keq). In contrast to prior work, we present evidence for the reaction of alcohols with boric acid, rather than the borate anion. Based upon the results obtained for phenylboronic acid, alternative cross-linking agents are proposed.     

Capillary zone electrophoretic separation of basic proteins and drugs using guaran as a buffer modifier

Summary Guaran, a neutral polysaccharide, has been used as a buffer modifier to improve the separation of basic proteins and drugs. Migration reproductibility, peak shape and efficiency were improved when 0.1% guaran was added to the buffer. The concentration of guaran, ionic strength, and pH of buffer solution were optimized to obtain the optimum separation of proteins. Possible separation efficiencies of 700,000 plates per meter were obtained for test proteins. The relative standard deviation (% RSD) of the migration time of all test proteins was less than 0.5%. Improved separation of β-blockers was also observed when guaran was added to the buffer.     

Synthesis of Boron(III)‐Coordinated Subchlorophins and Their Peripheral Modifications

A pyrrole‐cleaving modification to transform boron(III) meso ‐triphenylsubporphyrin into boron(III) meso ‐triphenylsubchlorophin has been developed. Boron(III) subchlorophins thus synthesized show absorption and fluorescence spectra that are roughly similar to those of boron(III) subchlorins, but B ‐methoxy boron(III) subchlorophin showed considerably intensified fluorescence and a small Stokes shift. Peripheral modification reactions of B ‐phenyl boron(III) subchlorophin such as regioselective nitration with Cu(NO₃)₂⋅3 H₂O, ipso ‐substitution reactions of boron(III) α‐nitrosubchlorophin with CsF and CsCl, and Pd‐catalyzed cross‐coupling reactions of boron(III) α‐chlorosubchlorophin with arylacetylenes, have been also explored to tune the optical properties of subchlorophins.     

Solid-state synthesis of boron subnitride, B6N: myth or reality?

Solid-state synthesis of boron subnitride, B₆N, as a result of chemical interaction between boron and boron nitride at 7.5 GPa and 1700 °C has been previously reported by Hubert et al. However, a critical analysis of the results has shown that the evidence for the formation of boron subnitride with B₆O-like structure is inconclusive. We have studied in situ the interaction between boron and BN at the same p–T conditions using X-ray diffraction with synchrotron radiation. At 7.4 GPa and 1700 °C the formation of a new phase has not been observed. At the same time, HP–HT treatment has resulted in strong and unpredictable preferred orientation of boron crystallites. This leads to the rise of some weak boron reflections that might be erroneously attributed to the appearance of a new phase. To cite this article: V.L. Solozhenko et al., C. R. Chimie 9 (2006).     

Luminescent Quadrupolar Borazine Oligomers: Synthesis,Photophysics, and Two‐Photon Absorption Properties

A set of monodisperse bent donor–acceptor–donor‐type conjugated borazine oligomers, BnNn+1 (n=1–4), incorporating electron‐rich triarylamine donor and electron‐deficient triarylborane acceptor units has been prepared through an iterative synthetic approach that takes advantage of highly selective silicon–boron and tin–boron exchange reactions. The effect of chain elongation on the electrochemical, one‐ and two‐photon properties and excited‐state photodynamics has been investigated. Strong intramolecular charge transfer (ICT) from the arylamine donors to boryl‐centered acceptor sites results in emissions with high quantum yields (Φ_fl>0.5) in the range of 400–500 nm. Solvatochromic effects lead to solvent shifts as large as ～70 nm for the shortest member (n=1) and gradually decrease with chain elongation. The oligomers exhibit strong two‐photon absorption (2PA) in the visible spectral region with 2PA cross sections as large as 1410 GM (n=4), and broadband excited‐state absorption (ESA) attributed to long‐lived singlet–singlet and radical cation/anion absorption. The excited‐state dynamics also show sensitivity to the solvent environment. Electrochemical observations and DFT calculations (B3LYP/6‐31G*) reveal spatially separated HOMO and LUMO levels resulting in highly fluorescent oligomers with strong ICT character. The BnNn+1 oligomers have been used to demonstrate the detection of cyanide anions with association constants of log K>7.     

Highly active polymeric organocatalyst: Chiral ionic polymers prepared from 10,11‐didehydrogenated cinchonidinium salt

Since few examples of 10,11‐didehydrogenated (3‐ethynyl) cinchona alkaloids have been utilized as organocatalysts in asymmetric reaction, we synthesized 10,11‐didehydrogenated cinchonidine. The 3‐vinyl group of cinchonidine was transformed into a 3‐ethynyl functionality. Based on the resulting 10,11‐didehydrogenated cinchonidine, the corresponding quaternary ammonium salt and its dimers were prepared. The ion‐exchange reaction between the quaternary ammonium salt and sodium sulfonate produced the quaternary ammonium sulfonate as a stable ionic compound. Chiral ionic polymers were then synthesized by the ion‐exchange polymerization of the 10,11‐didehydrogenated cinchonidinium salt dimer and a disulfonate. The chiral ionic polymers were found to be capable of efficiently catalyzing the asymmetric alkylation of N‐(diphenylmethylene)glycine tert‐butyl ester. The enantioselectivities obtained with the polymeric catalysts were higher than those obtained with the corresponding monomeric catalyst. Dimers of 10,11‐didehydrogenated cinchonidinium salts were prepared. Treatment of the dimer with disodium disulfonate gave the chiral ionic polymers, which showed high catalytic activity in asymmetric benzylation of N‐(diphenylmethylen)glycine tert‐butyl ester. The polymeric catalysts were reused several times without the loss of catalytic activity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 621–627     

K 0-prompt gamma ray activation analysis for estimation of boron and cadmium in aqueous solutions

K ₀-PGAA (prompt gamma activation analysis) has been used to estimate boron and cadmium contents in industrial and environmental materials from some different local areas as well as, samples from different locations in Burullus and Qarun Lakes. A high efficiency Compton background suppression gamma-ray spectrometry by anti-coincidence counting with a NaI(Tl) shield around a central HPGe detector for in beam PGAA using a ²⁵²Cf neutron source has been calibrated and described in this paper. The facility is principally designed for measurement of the prompt gamma-ray spectra obtained due to thermal neutron capture using 1951.14 keV gamma line of ³⁵Cl as the internal mono-standard comparator. A calibration curves were developed in which a set of boron and cadmium standards were tested and the count rate to boron and cadmium mass curves were determined. This set of boron and cadmium measurements was compared with a method for determining composition using K ₀-PGAA. Conventional prompt neutrons capture Gamma-ray results were in a good agreement with the data obtained by K ₀-PGAA method. Detection limits and self-shielding study are presented.     

From Mono‐ to Poly‐Substituted Frameworks: A Way of Tuning the Acidic Character of Cc?H in o‐Carborane Derivatives

The incorporation of iodine atoms onto the boron vertices of the o‐carborane framework causes, according to spectroscopic data, a uniform increase in the acidic character of the C_c? H (C_c= cluster carbon) vertices, whereas the incorporation of methyl groups onto the boron vertices of the o‐carborane framework reduces their acidity. Methyl groups when attached to boron are electron‐withdrawing in boron clusters, whereas iodine atoms bonded to boron act as electron donors. This has been proven on B‐methyl and B‐iodinated o‐carboranes with NMR spectroscopy measurements and DFT calculations of natural bond orbital (NBO) charges, which show a cumulative buildup of positive cluster‐only total charge (CTC) on B‐methyl o‐carboranes and a cumulative buildup of negative cluster‐only total charge for B‐iodinated o‐carboranes.     

Study on the Dynamics of Blending of Glucomannan with Carrageenan and Guaran Gum

In order to prove up the interaction between konjac glucomannan (KGM) and other amyloses, by using KGM, guaran gum and carrageenan as materials, their blending in different external conditions was modeled by means of molecular dynamics (MD) method. The result showed that 323 K was a significant turning point for the formation of hydrogen bond, and KGM and guaran gum were just juxtaposed together via intermolecular hydrogen bond; but with the addition of carrageenan, KGM, guaran gum and carrageenan were spirally twisted together, and when their blending proportion is 3:2:9 the combination was the most compact. Moreover, the research result has provided the sequent studies afterwards on amyloses with some references.     

1,1'-bis(6-chloroanthraquinonyl)amine as a reagent for trace amounts of boron

A new reagent, 1,1'-bis(6-chloroanthraquinonyl)amine, has been synthesized and applied to the determination of trace amounts of boron. A blue complex is formed on heating with orthoboric acid in 96% sulfuric acid medium.Oxidizing agents and some cations interfere with the method; separation of the boron either by distillation of the methyl ester or by ion exchange removes such interferences The method is very sensitive i.e., 0.0005 μg B/cm², and can be used for the analyses of vegetation.     

Protonenresonanz- und Röntgenstrukturuntersuchungen an unsymmetrisch substituierten Aminoboranen. III—Substituentenabhängigkeit der Struktur

A number of unsymmetrically substituted N-methylaminoboranes, each with a phenyl ring at nitrogen and boron, were synthesized. The ratio of the cis-trans isomers has been investigated by means of ¹H NMR spectroscopy and its dependence on the size of the aromatic moieties and the second substituent on boron is discussed. The structures of the compounds were established from the position of the N-methyl signal and were based on X-ray structure determinations of (4-bromophenylmethylamino) chlorophenylborane and (4-bromo-2-methylphenylmethylamino)chloro(2-methylphenyl)borane. In the case of (methylphenylamino)chlorophenylborane, the isomer with the phenyl group in cis position is highly favoured (90%) in the thermal equilibrium. Substitution of one of the phenyl groups by a 2-methyl- or 2,6-dimethylphenyl group decreases the fraction of the cis isomer. The same occurs when the chlorine substituent at boron is replaced by bromine or the methyl group. In absolute terms, the trans isomers are energetically more stable than the cis isomers only if one of the substituents at boron is a methyl or a 2,6-dimethylphenyl group or if there is a 2-methylphenyl substituent both at the nitrogen and the boron atom. Steric hindrance and electronic repulsion are probably responsible for the observed substitution effects. In addition, these experiments show that the isomer favoured in the crystal also predominates in solution.