Deprotonation of 1,1′-methylenebis[4-tert-butyl-2-(diphenylphosphino)-benzene] and its analogues: synthesis and crystal structure of {5-But-2-[4-But-2-(Ph2P)C6H3(Ph)CH]C6H3P(Ph)K(OEt2)}2

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

Sorbent for the separation of enantiomers of amino acids based on silica gel modified with stabilized Au nanoparticles

1. Download : Download high-res image (94KB)
2. Download : Download full-size image

     

New nitric oxide-carrier systems based on an amphiphilic copolymer of N-vinylpyrrolidone with triethylene glycol dimethacrylate

1. Download high-res image (122KB)
2. Download full-size image

     

Morphology and composition of NiMoW/P-Al2O3 systems based on the modified support with varied P2O5 content

1. Download high-res image (146KB)
2. Download full-size image

     

Crystal structure and nontrivial magnetic properties of CuII binuclear complex based on 4-methyl-2,6-bis{[2-(4,6-dimethyl-pyrimidin-2-yl)hydrazono]methyl}phenol

1. Download high-res image (167KB)
2. Download full-size image

     

Sorbents based on transition metal salts for the retention of low molecular weight N-, O- and S-containing organic compounds from the air flow

1. Download : Download high-res image (168KB)
2. Download : Download full-size image

     

Robust thermostable polymer composition based on poly[N,N′-(1,3-phenylene)isophthalamide] and 3,3-bis(4-acrylamidophenyl)phthalide for laser 3D printing

1. Download high-res image (98KB)
2. Download full-size image

     

Catalysts for heterogeneous oxidation reaction based on metalloporphyrins immobilized on kaolinite modified with triethanolamine

Raw kaolinite was modified with triethanolamine (TEA), in an attempt to create a new support for the immobilization of metalloporphyrins. Anionic metalloporphyrins containing Fe(3+) or Mn(3+) as metallic centers were immobilized on the prepared support, and the obtained solids were characterized by Fourier-transform infrared (FTIR) spectroscopy, X-ray powder diffraction (XRPD), thermal analysis (thermogravimetric and differential thermal analyses--TGA/DTA), and scanning electron microscopy (SEM). The solids were used in heterogeneous oxidation catalysis of cyclooctene and cyclohexane. The yields from the oxidation of cyclooctene depended on the amount of TEA and/or water present in the solids. Good reaction yields were obtained for the oxidation of cyclohexane, with selectivity for the alcohol. In one specific case, a possible co-catalytic activity was verified for TEA during the oxidation of cyclohexane.     

Integrating non-precious-metal cocatalyst Ni3N with g-C3N4 for enhanced photocatalytic H2 production in water under visible-light irradiation

Photocatalytic H₂ production via water splitting in a noble-metal-free photocatalytic system has attracted much attention in recent years. In this study, noble-metal-free Ni₃N was used as an active cocatalyst to enhance the activity of g-C₃N₄ for photocatalytic H₂ production under visible-light irradiation (λ > 420 nm). The characterization results indicated that Ni₃N nanoparticles were successfully loaded onto the g-C₃N₄, which accelerated the separation and transfer of photogenerated electrons and resulted in enhanced photocatalytic H₂ evolution under visible-light irradiation. The hydrogen evolution rate reached ～305.4 μmol h^?1 g^?1, which is about three times higher than that of pristine g-C₃N₄, and the apparent quantum yield (AQY) was ～0.45% at λ = 420. Furthermore, the Ni₃N/g-C₃N₄ photocatalyst showed no obvious decrease in the hydrogen production rate, even after five cycles under visible-light irradiation. Finally, a possible photocatalytic hydrogen evolution mechanism for the Ni₃N/g-C₃N₄ system is proposed.     

New selective cyclizations of alk-4-ynals with primary amines and azoles:one-pot synthesis of 2-azolylpyrrolidines and 3-iminocyclopentenes

1. Download high-res image (111KB)
2. Download full-size image

     

Control of pore environment in highly porous carbon materials for C2H6/C2H4 separation with exceptional ethane uptake

Adsorptive separation of C₂H₆ from C₂H₄ by adsorbents is an energy-efficient and promising method to boost the polymer grades C₂H₄ production. However, that C₂H₆ and C₂H₄ display very similar physical properties, making their separation extremely challenging. In this work, by regulating the pore environment in a family of chitosan-based carbon materials (C-CTS-1, C-CTS-2, C-CTS-4, and C-CTS-6)- we target ultrahigh C₂H₆ uptake and C₂H₆/C₂H₄ separation, which exceeds most benchmark carbon materials. Explicitly, the C₂H₆ uptake of C-CTS-2 (166 cm³/g at 100 kPa and 298 K) has the second-highest adsorption capacity among all the porous materials. In addition, C-CTS-2 gives C₂H₆/C₂H₄ selectivity of 1.75 toward a 1:15 mixture of C₂H₆/C₂H₄. Notably, the adsorption enthalpies for C₂H₆ in C-CTS-2 are low (21.3 kJ/mol), which will facilitate regeneration in mild conditions. Furthermore, C₂H₆/C₂H₄ separation performance was confirmed by binary breakthrough experiments. Under different ethane/ethylene ratios, C-CTS-X extracts a low ethane concentration from an ethane/ethylene mixture and produces high-purity C₂H₄ in one step. Spectroscopic measurement and diffraction analysis provide critical insight into the adsorption/separation mechanism. The nitrogen functional groups on the surface play a vital role in improving C₂H₆/C₂H₄ selectivity, and the adsorption capacities depend on the pore size and micropore volume. Moreover, these robust porous materials exhibit outstanding stability (up to 800 °C) and can be easily prepared on a large scale (kg) at a low cost (～$26 per kg), which is very significant for potential industrial applications.     

Fe-Ag/Al_2O_3催化丙烯还原NO的实验研究

以蜂窝状陶瓷为载体,采用溶胶凝胶法和浸渍法制备了不同Fe/Ag负载量的Fe-Ag/Al_2O_3催化剂。以C_3H_6为还原剂,在模拟烟气条件下和200-700℃范围内,程序控温的陶瓷管流动反应器上进行了催化还原NO的性能评估。结果表明,7.2Fe/1.9Ag/20Al_2O_3/CM在500和550℃时催化C_3H_6还原NO的脱硝效率分别超过90%和达到100%。铁离子能有效地提高Ag/20Al_2O_3/CM催化剂抵抗烟气中的SO_2和H_2O的能力。结果表明,当烟气中含有体积分数为0.02%的SO2和8%的H_2O时,在500℃时7.2Fe/1.9Ag/20Al_2O_3/CM催化C_3H_6还原NO的脱硝效率不受影响,在6 h的连续实验中保持90%的脱硝效率而没有下降。而未经铁离子修饰的2Ag/20Al_2O_3/CM的催化活性则受烟气中的SO2和H_2O影响很大,0.02%的SO2和8%的H_2O分别使2Ag/20Al_2O_3/CM在500℃时催化C_3H_6还原NO的脱硝效率迅速从70%分别下降至46%和25%。XRD和SEM表征结果表明,经铁离子修饰后的7.2Fe/1.9Ag/20Al_2O_3/CM催化剂中,形成了AgFeO_2以及Fe~(3+),催化剂表面变得疏松多孔,形成以Fe_3O_4为主的针状和片状晶体。H_2-TPR结果表明,7.2Fe/1.9Ag/20Al_2O_3/CM比Ag/20Al_2O_3/CM在更宽的温度范围内具有更好的还原特性。吡啶吸附红外光谱(Py-FTIR)实验结果显示,Fe增加了催化剂表面的Lewis酸性位。     

A highly selective fluorescent sensor for Ca2+ and Sr2+ based on diarylethene with a furan-carbohydrazide unit

A fluorescent sensor based on diarylethene has been designed and synthesized. The sensor not only exhibited excellent photochromic properties, but also has distinguishing ability for Ca²⁺ and Sr²⁺ from other metal ions. Upon addition of Ca²⁺ and Sr²⁺, its emission intensity enhanced 27-fold and 24-fold respectively, accompanied by the emission peak shifted from 439 nm to 484 nm for Ca²⁺, and to 479 nm for Sr²⁺. The 1:1 stoichiometry between the sensor and the two ions was confirmed by Job's plot and HRMS. The LOD for Ca²⁺ and Sr²⁺ was determined to be 9.4 × 10^?8 mol L^?1 and 7.2 × 10^?8 mol L^?1, respectively. Furthermore, the sensor was applied in the detection of Ca²⁺ and Sr²⁺ in practical samples successfully.     

Copper(II) complexes of 2-(pyridine-2-yl)imidazolidine-4-thione derivatives for asymmetric Henry reactions

The preparation of a new series of 2-(pyridine-2-yl)imidazolidine-4-thione derivatives is described. Their corresponding copper(II) complexes were found to be highly enantioselective catalysts for asymmetric Henry reactions (up to 98% ee). Immobilization of these complexes by anchoring onto Merrifield? resin with respect to their use as recyclable catalysts was subsequently performed. The heterogeneous catalysts prepared in this way were tested in the asymmetric Henry reactions and showed high catalytic activity; they can be easily recycled, although their enantioselectivities were only moderate (～50% ee).     

Acetylene based short route from 2,2,6,6-tetramethylpiperidin-4-one oxime to 2-(pyrazol-5-yl)-4,5,6,7-tetrahydropyrrolo[3,2-c]pyridines

1. Download : Download high-res image (82KB)
2. Download : Download full-size image

     

Three-dimensional pillar-layered copper(II) metal-organic framework with immobilized functional OH groups on pore surfaces for highly selective CO2/CH4 and C2H2/CH4 gas sorption at room temperature

A new three-dimensional microporous metal-organic framework Cu(BDC-OH)(4,4'-bipy)·G(x) (UTSA-15; H(2)BDC-OH = 2-hydroxy-benzenedicarboxylic acid, 4,4'-bipy =4,4'-bipyridine, G = guest molecules) with functional -OH groups on the pore surfaces was solvothermally synthesized and structurally characterized. UTSA-15 features a three-dimensional structure having 2D intercrossed channels of about 4.1 × 7.8 and 3.7 × 5.1 ?(2), respectively. The small pores and the functional -OH groups on the pore surfaces within the activated UTSA-15a have enabled their strong interactions with CO(2) and C(2)H(2) which have been revealed in their large adsorption enthalpies of 39.5 and 40.6 kJ/mol, respectively, highlighting UTSA-15a as the highly selective microporous metal-organic framework for the CO(2)/CH(4) and C(2)H(2)/CH(4) gas separation with separation selectivity of 24.2 and 55.6, respectively, at 296 K.     

Building surface defects by doping with transition metal on ultrafine TiO2 to enhance the photocatalytic H2 production activity

Inefficient charge separation and limited light absorption are two critical issues associated with high-efficiency photocatalytic H₂ production using TiO₂. Surface defects within a certain concentration range in photocatalyst materials are beneficial for photocatalytic activity. In this study, surface defects (oxygen vacancies and metal cation replacement defects) were induced with a facile and effective approach by surface doping with low-cost transition metals (Co, Ni, Cu, and Mn) on ultrafine TiO₂. The obtained surface-defective TiO₂ exhibited a 3–4-fold improved activity compared to that of the original ultrafine TiO_2. In addition, a H₂ production rate of 3.4 μmol/h was obtained using visible light (λ > 420 nm) irradiation. The apparent quantum yield (AQY) at 365 nm reached 36.9% over TiO₂-Cu, significantly more than the commercial P25 TiO₂. The enhancement of photocatalytic H₂ production activity can be attributed to improved rapid charge separation efficiency and expanded light absorption window. This hydrothermal treatment with transition metal was proven to be a very facile and effective method for obtaining surface defects.     

A novel hybrid macrocyclic receptor based on bile acid and calix[4]arene frameworks for metal ion recognition

A novel hybrid macrocyclic receptor based on bile acid and calix[4]arene has been synthesized using the α-face of the bile acid and cone-conformation of calix[4]arene. Metal recognition properties of receptor were investigated. The receptor showed the strongest affinity for Hg²⁺ in acetonitrile. The stoichiometry of the Receptor:Hg²⁺ was 1:1.     

PdCu/Al2O3 catalyst for Sonogashira cross-coupling: effect of a Pd/Cu ratio on the catalytic performance

1. Download high-res image (164KB)
2. Download full-size image

     

Improved preparation of h5-C5H5 Fe(CO)2(h1-alkyl) complexes from [h5-C5H5Fe(CO)2(h2-alkene)]+BF4−

Sodium cyanoborohydride has been found to be very effective for the conversion of [(h⁵-C₅H₅)Fe(CO)₂(h²-alkene)]⁺BF₄^? complexes to the corresponding h¹-alkyl derivatives.