基于声学超材料的低频可调吸收器

在当今社会,噪声污染已经成为人类健康的一大威胁,如何有效地控制和消除噪声污染一直是科研领域的一个重要话题.本文以开口环嵌套结构为模型,设计并制备了一种声学超材料.通过理论分析、数值模拟和实验测试,发现由于模型内部空腔的强烈耦合共振效应,该超材料可以在低频区域实现接近完美的吸声效应.此外,通过简单地绕轴旋转其内腔开口方向,即可改变该超材料的相对阻抗值,进而在较宽的频带范围内实现对吸收峰位置的可调控制.由于该超材料具有深亚波长的尺寸,因此非常有利于低频吸声器件的小型化和集成化,同时该模型也为宽带吸收器的设计奠定了基础.     

经典局域共振型水声超材料的吸隔声性能研究*

基于水声超材料吸声机理和多层平行介质平面波理论,建立局域共振型水声超材料结构,通过COMSOL进行建模计算,研究该结构的吸声性能机理,此外为了验证钢背衬的隔声性能,在该水声超材料结构基础上添加一层0.005m厚的钢背衬进行仿真对比。研究结果表明,在频段为200Hz-4000Hz时,水声超材料声学性能较好,吸声性能整体较优,且添加钢背衬的水声超材料隔声性能较优,甚至在某频率点达到15dB的隔声差值;此外通过位移场图进一步揭示水声超材料的吸声机理,发现水声超材料结构的位移场和钢背衬都对吸声性能会产生影响,钢背衬通过影响共振吸收来影响吸声性能,而位移场则通过位移幅度大小影响吸声性能。     

Optimization of locally resonant acoustic metamaterials on underwater sound absorption characteristics

The study of acoustic metamaterials, also known as locally resonant sonic materials, has recently focused on the topic of underwater sound absorption. The high absorption occurs only within a narrow frequency band around the locally resonant frequency. Nevertheless, this problem can be addressed through a combination of several acoustic metamaterial layers that have different resonant frequencies. In this paper, an optimization scheme, a genetic and a general nonlinear constrained algorithm, is utilized to enhance the low-frequency underwater sound absorption of an acoustic metamaterial slab with several layers. Both the physical and structural parameters of the acoustic metamaterial slab are optimized to enlarge the absorption band. In addition, the sound absorption mechanism of the acoustic metamaterial slab is also analyzed. The result shows that each layer is found to oscillate as a nearly independent unit at its corresponding resonant frequency. The theoretical and experimental results both demonstrate that the optimized metamaterial slab can achieve a broadband (800–2500 Hz) absorption of underwater sound, which is a helpful guidance on the design of anechoic coatings.     

Broadband low-frequency acoustic absorber based on metaporous composite

Broadband absorption of low-frequency sound waves via a deep subwavelength structure is of great and ongoing interest in research and engineering. Here, we numerically and experimentally present a design of a broadband low-frequency absorber based on an acoustic metaporous composite (AMC). The AMC absorber is constructed by embedding a single metamaterial resonator into a porous layer. The finite element simulations show that a high absorption (absorptance A>0.8) can be achieved within a broad frequency range (from 290 Hz to 1074 Hz), while the thickness of AMC is 1/13 of the corresponding wavelength at 290 Hz. The broadband and high-efficiency performances of the absorber are attributed to the coupling between the two resonant absorptions and the trapped mode. The numerical simulations and experimental results are obtained to be in good agreement with each other. Moreover, the high broadband absorption can be maintained under random incident acoustic waves. The proposed absorber provides potential applications in low-frequency noise reduction especially when limited space is demanded.     

Double-negative dynamic properties in one-dimensional multi-phase metamaterial based on the symmetrical equivalent layer

Acoustic metamaterials have important potential applications in engineering by their unusual properties. Based on the concept of symmetrical equivalent layer, it is found that layered acoustic metamaterial which exhibits simultaneously negative effective modulus and density can be existed. By using the transfer matrix method, the continuous double-negative dynamic properties can be achieved through a multi-phase microstructure considering viscous damping, and the left-handed wave propagation property appears during the double-negative frequency regions. This will be a reference for the design of 1D acoustic negative refraction metamaterials.     

Amplification of acoustic evanescent waves using metamaterial slabs

We amplified acoustic evanescent waves using metamaterial slabs with a negative effective density. For the amplifying effect of the slab to overcome the dissipation, it is necessary that the imaginary part of the effective density is much smaller than the real part, a condition not satisfied so far. We report the construction of membrane-based two-dimensional negative-density metamaterials which exhibited remarkably small dissipation. Using a slab of this metamaterial we realized a 17-fold net amplitude gain at a remote distance from the evanescent wave source. Potential applications include acoustic superlensing.     

Active terahertz metamaterials

In this paper we present an overview of research in our group in terahertz (THz) metamaterials and their applications. We have developed a series of planar metamaterials operating at THz frequencies, all of which exhibit a strong resonant response. By incorporating natural materials, e.g., semiconductors, as the substrates or as critical regions of metamaterial elements, we are able to effectively control the metamaterial resonance by the application of external stimuli, e.g., photoexcitation and electrical bias. Such actively controllable metamaterials provide novel functionalities for solid-state device applications with unprecedented performance, such as THz spectroscopy, imaging, and many others.     

一种基于3D打印技术的结构型宽频吸波超材料

设计了一种三层宽频吸波超材料,其表层和中间层为单元尺寸不同的周期阵列结构,底层为吸波平板结构,优化后的总厚度仅为4.7 mm,并采用三维(3D)打印技术成功制备了该吸波超材料.吸波体反射率测试结果表明,在电磁波垂直入射条件下,宽频吸收峰分别出现在5.3和14.1 GHz,两峰叠加使得其在4-18 GHz频率范围内反射损耗均小于-10 dB.采用S参数反演法计算了每一层的等效电磁参数,并利用多层结构反射率公式推导得出该模型的理论反射率,理论计算结果与实测结果基本一致.通过研究能量损耗、电场分布和磁场分布揭示了吸波机理,分析表明该吸波体的宽频吸收效果源于三层结构产生的吸收带宽叠加.本文提出的吸波超材料具有良好的宽频吸收效果,尤其在低频范围吸波性能较佳,结合3D打印快速成型技术,可获得结构精细的三层吸波超材料,具有重要的实际应用价值和广阔的应用前景.     

微穿孔板复合板型声学超材料的低频吸声

针对单层微穿孔板的低频吸声问题提出了微穿孔板复合板型声学超材料结构。将板型声学超材料置入微穿孔板结构的背腔内部实现结构复合。实验结果表明:在相同背腔厚度下,复合结构的吸声性能整体优于单层微穿孔板结构,其中复合结构的吸声曲线从396~892 Hz均大于0.6,在453 Hz处吸声系数达到0.972。利用有限元方法对复合结构进行了仿真,仿真计算的吸声曲线与实验吸声曲线的趋势基本相同,同时发现低频吸声主要由板型声学超材料与声波相互作用贡献。板型声学超材料的吸声峰值的对应频率处,其等效动态质量密度从正变负。在复合结构内部的微穿孔板和板型声学超材料存在相互耦合作用,使得复合结构的第一峰值发生微小偏移。增加板型声学超材料的质量块重量可以使第一吸声峰值向低频移动;保持总背腔厚度不变,增加板型声学超材料的子腔厚度,也可以使第一吸声峰向低频移动。      

Optimized Modular Design of Acoustic Metamaterials: Targeted Noise Attenuation

A modular design optimization method for acoustic metamaterial cells is proposed, which can ensure satisfying the targeted noise attenuation by using only the objective function of an arbitrary noise source and the constraints of the application at hand. The core algorithm is a fusion of the generalized particle swarm algorithm and wave finite element method specialized for structural and targeted optimization of metamaterials. The output is the optimized metamaterial cell and its sound barrier structure. The desired noise reduction performance is verified via acoustic testing of a 3D-printed prototype. The simulation and experimental results of test cases show that the designed acoustic metamaterial can perfectly block the target noise band and have significant advantages in terms of design efficiency, light weight, and noise attenuation.     

Hybridization effect in coupled metamaterials

Although the invention of the metamaterials has stimulated the interest of many researchers and possesses many important applications, the basic design idea is very simple: composing effective media from many small structured elements and controlling its artificial EM properties. According to the effective-media model, the coupling interactions between the elements in metamaterials are somewhat ignored; therefore, the effective properties of metamaterials can be viewed as the “averaged effect” of the resonance property of the individual elements. However, the coupling interaction between elements should always exist when they are arranged into metamaterials. Sometimes, especially when the elements are very close, this coupling effect is not negligible and will have a substantial effect on the metamaterials’ properties. In recent years, it has been shown that the interaction between resonance elements in metamaterials could lead to some novel phenomena and interesting applications that do not exist in conventional uncoupled metamaterials. In this paper, we will give a review of these recent developments in coupled metamaterials. For the “metamolecule” composed of several identical resonators, the coupling between these units produces multiple discrete resonance modes due to hybridization. In the case of a “metacrystal” comprising an infinite number of resonators, these multiple discrete resonances can be extended to form a continuous frequency band by strong coupling. This kind of broadband and tunable coupled metamaterial may have interesting applications. Many novel metamaterials and nanophotonic devices could be developed from coupled resonator systems in the future.     

Metamaterials and their application in microwaves: A review

A metamaterial is a composite material that has attracted the attention of researchers since the late 1990s-early 2000s. This material contains an artificial periodic structure, which modifies its permittivity and permeability and, thereby, makes it possible to control the dispersion, refraction, and reflection of electromagnetic waves in the metamaterial. Analytical and experimental studies of the properties of metamaterials, as well as their applications, cover a wide frequency range from radio waves to the visible range. In recent years, considerable progress has been made toward the application of these materials in the microwave range (1–100 GHz). Works on development and application of metamaterials in the microwave range published over the last 8–10 years are reviewed. Artificial transmission lines as 1D metamaterials are discussed. Resonators, filters, and phase shifters based on the “metamaterial philosophy” are considered. Special attention is given to the application of metamaterials in the antenna technology.     

Two new designs of lamp-type piezoelectric metamaterials for active wave propagation control

A major limitation of current metamaterials is that they control the wave propagation depending on their structure. Active metamaterials in this paper are designed whose physical structure is fixed, yet the position where they control the wave propagation can be changed by piezoelectric conditions. Two kinds of lamp-type piezoelectric metamaterials were assembled from an aluminum base, rubber plate and steel column, the piezoelectric patches were attached on both sides of the steel column, which can change the equivalent elastic modulus of the whole structure when the pair of patches are accessed by an LC circuit. The equivalent elastic modulus becomes zero or negative when the frequency of the circuit varies between 29,000 Hz and 30,000 Hz, in this case the two kinds of lamp-type piezoelectric metamaterials behave as a wave localization and a wave guide, respectively. The advantage of the lamp-type piezoelectric metamaterials is that we can control the wave propagation actively, as long as we change the position of the piezoelectric patches or choose the kind of lamp-type piezoelectric metamaterial. This is more flexible than a traditional passive metamaterial and provides a new way for us to design some acoustic equipment, such as acoustic cloaking, an acoustic black hole, filter or wave guide.     

空间盘绕型声学超材料的亚波长拓扑谷自旋态

声子晶体的Dirac线性色散关系,使其具有奇特的声拓扑特性,在声波控制领域具有良好的应用前景.目前,声子晶体的拓扑边缘态主要基于Bragg散射所产生的能带结构,难以实现低频声波的受拓扑保护单向边缘传输.本文引入空间盘绕结构,设计了具有C_(3v)对称性的空间盘绕型声学超材料,并研究其布里渊区高对称点(K/K'点)的亚波长Dirac锥形线性色散.接着,通过旋转打破空间盘绕型声学超材料的镜像对称性,使其Dirac简并锥裂开而产生亚波长拓扑相变和亚波长拓扑谷自旋态.最后,采用拓扑相位互逆的声学超材料构造拓扑界面,实现声拓扑谷自旋传输.空间盘绕型声学超材料的亚波长Dirac线性色散与亚波长拓扑谷自旋态突破了声子拓扑绝缘体的几何尺寸限制,为声拓扑稳健传输在低频段的应用提供理论基础.     

Wide bandwidth acoustic transmission via coiled-up metamaterial with impedance matching layers

Many acoustic metamaterials suffer from a narrow bandwidth transmission because of the impedance mismatch at the airmetamaterial interface. In this paper, a two-dimensional impedance-matched metamaterial with broadband transmission performance is investigated. The impedance matching layer is introduced for a gradient variation of effective impedance from the inlet of the unit to the outlet. The effective medium theory and corresponding effective model are used to explain the underlying mechanism. The improved energy transmission of our designs is demonstrated by experiment and numerical simulation within a broad frequency bandwidth over 6 kHz. Our impedance-matched design can be used to enhance sound absorption, which is expected to present improved acoustic performance in the applications of acoustic damper and muffler.     

基于电磁谐振的极化无关透射吸收超材料吸波体

仿真并实验验证了基于电磁谐振的极化无关透射吸收超材料吸波体, 该吸波体可以实现低频透射和高频吸收.实验测试结果表明, 该吸波体在6.77 GHz 吸收率峰值为83.6%, 半功率带宽为4.3%, 实现窄带强吸收.为进一步拓展该谐振型超材料吸波体的吸收带宽, 利用其低频透射特性, 将两个工作于不同频段的吸波体叠加在一起, 测试结果表明, 复合后超材料吸波体的半功率带宽可以增大到10.9%, 吸收率也略有增强. 该超材料吸波体设计简单, 具有较强的实用性和应用前景. 关键词： 极化无关 透射吸收 超材料吸波体     

Design of an acoustic bending waveguide with acoustic metamaterials via transformation acoustics

Transformation acoustics is employed to design an acoustic bending waveguide. A two-dimensional square area with anisotropic and homogeneous material properties is transformed into a fan-shaped area with anisotropic and inhomogeneous material properties to rotate the direction of beam propagation. An alternating layered structure is considered to approximate a medium with anisotropic material properties. From the calculation results, the transformation medium can be realized by an alternating layered structure consisting of water and fluid with negative mass density. We propose that an acoustic metamaterial composed of three layers in water background can be designed to replace negative mass density fluid. The effective mass density and bulk modulus of the system that is composed of the acoustic metamaterial and water are dependent on the incident frequency and the geometric size of the acoustic metamaterial. We tune the geometric size of the acoustic metamaterial to approach the corresponding mass density distribution of the negative mass density fluid at a specific frequency. Thereby, the acoustic bending waveguide designed by using transformation acoustics can be achieved by the acoustic metamaterials.     

基于遗传算法的五模材料分层优化*

由于超材料的微结构尺度不能忽略,利用超材料微结构所集成的器件等效参数不是连续分布的,而是呈离散分布的。因此在利用超材料设计声学器件的过程中,需要对器件进行分层离散化,而分层方案的选取往往会影响器件的工作效果。该文基于五模材料水下隐身衣的设计理论,提出了一种基于遗传算法的五模材料隐身衣分层优化策略,并分别对优化前和优化后的分层隐身衣做了声学仿真。仿真结果表明采用优化策略后,隐身衣背景声场的散射能量和反射能量均有大幅度降低,并且对窄带探测信号和宽带探测信号均有较好的隐身效果,因此该分层优化策略能够显著提升隐身衣的隐身效果。该文所提出的分层优化策略为提升五模材料隐身衣性能提供了理论支持,并可以进一步推广至其他超材料器件的微结构设计中。     

膨胀腔类超材料的传递损失研究*

声学超材料及结构已被广泛研究,其超结构通常利用3D打印技术实现,当结构刚度较小或者面积较大时,由声固耦合所导致的声学效果与设计不符的情况广泛存在。本文针对含有膨胀腔类的超材料,研究了声固耦合对其声学性能的影响,采用有限元计算结合阻抗管实验的方法,得到其传递损失,分析了声固耦合现象对传递损失的影响。结果表明：薄壁膨胀腔结构的作用频率范围与只考虑声学理论计算的设计不符,声固耦合现象对传递损失产生显著影响;采用增加膨胀腔壁厚、减少膨胀腔内径或选择金属材料的方式,都可以使得声固耦合现象对传递损失的影响减小;仿真结果与实验结果基本吻合。该研究结果说明：对于膨胀腔类超材料,当刚度较小或者面积较大时,对其进行声固耦合分析是完全必要的。     

Acoustic tunneling through artificial structures: From phononic crystals to acoustic metamaterials

We present a comparative study on the acoustic tunneling through artificial periodical composites, from phononic crystals to acoustic metamaterials. We find that the features of the acoustic tunneling are closely related with the origins of band gaps. In particular, the band gap associated with the negative effective material parameter in the metamaterial results in a better analog of the tunneling effect to the quantum system.