共查询到20条相似文献,搜索用时 15 毫秒
1.
We report a novel design of photonic crystal fiber (PCF) with a rectangular array of four closely-spaced, highly elliptical air holes in the core region and a circular-air-hole cladding. The proposed PCF is able to support ultra-wideband single-polarization single-mode (SPSM) transmission from the visible band to the near infrared band. With the aid of the inner cladding formed by the central air holes, one polarization of the fundamental mode can be cut off at very short wavelengths and ultra-wideband SPSM propagation can be achieved. The inner cladding also suppresses the higher order modes and allows large air filling fraction in the outer cladding while the proposed fiber remains SPSM, which significantly reduces the mode effective area and the confinement loss. Our simulation results indicate that the proposed PCF has a 1540 nm SMSP range with <0.25 dB/km confinement loss and an effective area of 2.2 μm2. Moreover, the group velocity dispersion (GVD) of the proposed PCF can also be tuned to be flat and near zero at the near infrared band (∼800 nm) by optimizing the outer cladding structure, potentially enabling many nonlinear applications. 相似文献
2.
Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect 下载免费PDF全文
A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems. 相似文献
3.
4.
5.
提出了一种基于定向耦合效应和表面等离子共振效应的交叉敏感分离的磁场温度传感结构.在光子晶体光纤的一个特定空气孔中填充磁流体,利用磁流体的磁光效应和定向耦合效应形成磁场传感通道;在垂直方向的另一空气孔的内壁镀金纳米薄膜并填充甲苯液体,利用甲苯的温敏效应和表面等离子共振效应形成温度传感通道.对应输出谱出现两个损耗峰,测量损耗峰位置可以间接测出磁场强度和温度变化.通过理论计算()和结构优化,在90—270 Oe1 Oe=10~3/(4π) A/m范围内,磁场强度的灵敏度最高可达1.16 nm/Oe;在25—60?C范围内,温度的灵敏度可达-9.07 nm/?C.虽然填充的两种液体的折射率都受环境温度的影响,但通过建立灵敏度系数矩阵,可以消除磁场强度与温度的交叉敏感,实现磁场温度双参量的高灵敏度检测. 相似文献
6.
High sensitivity plasmonic temperature sensor based on a side-polished photonic crystal fiber 下载免费PDF全文
A high sensitivity plasmonic temperature sensor based on a side-polished photonic crystal fiber is proposed in this work.In order to achieve high sensitivity and high stability,the gold layer is coated on the side-polished photonic crystal fiber to support surface plasmon resonance.The mixture of ethanol and chloroform is used as the thermosensitive liquid.The performances of the proposed temperature sensor were investigated by the finite element method(FEM).Simulation results indicate that the sensitivity of the temperature sensor is as high as 7.82 nm/℃.It has good linearity(R;=0.99803),the resolution of 1.1×10;℃,and the amplitude sensitivity of 0.1008℃;.In addition,the sizes of the small air hole and polishing depth have little influence on the sensitivity.Therefore,the proposed sensor shows a high structure tolerance.The excellent performance and high structure tolerance of the sensor make it an appropriate choice for temperature measurement. 相似文献
7.
Numerical analysis of a photonic crystal fiber based on two polarized modes for biosensing applications 下载免费PDF全文
This paper presents a theoretical study on a photonic crystal fiber plasmonic refractive index biosensor. The proposed photonic crystal fiber sensor introduces the concept of simultaneous detection with the linearly polarized and radially polarized modes because the sensing performance of the sensor based on both modes is relatively high, which will be useful for selecting the modes to make the detection accurately. The sharp single resonant peaks of the linearly polarized mode and radially polarized mode, are stronger and more sensitive to the variation of analyte refractive index than that of any other polarized mode in this kind of photonic crystal fiber. For linearly polarized mode and radially polarized mode, the maximum sensitivities of 10448.5nm per refractive index unit and 8230.7nm per refractive index unit can be obtained, as well as 949.8 and 791.4 for figure of merits in the sensing range of 1.33-1.45, respectively. Compared with the conventional Au-metalized surface plasmon resonance sensors, our device is better and can be applied as a biosensor. 相似文献
8.
Theoretical simulation of a novel birefringent photonic crystal fiber with surface plasmon resonance around 1300 nm 下载免费PDF全文
In this paper, a novel birefringent photonic crystal fiber(PCF) with the silver-coated and liquid-filled air-holes along the vertical plane is designed. Simulation results show that the thickness of silver layer, the sizes of holes, and the refractive index of liquid strongly strengthen the gaps between two polarized directions. The surface plasmon resonance peak along y axis can be up to 675.8 d B/cm at 1.33 μm. The proposed PCF has important application in polarization devices, such as filters and beam splitters. 相似文献
9.
利用光子晶体光纤结构的灵活性和性能的优越性, 设计了一种基于D形光子晶体光纤的折射率和温度传感器. 在D形光子晶体光纤表面抛磨并镀上金纳米薄膜, 作为表面等离子体共振传感通道用来测量液体折射率; 在包层的一个空气孔中填充温敏液体甲苯, 作为定向耦合通道实现对温度的测量. 进一步的数值计算发现, 基于定向耦合效应的温度传感和基于表面等离子体共振的折射率传感相互独立, D形光子晶体光纤同时进行折射率和温度传感检测. 在各向异性的完美匹配层边界条件下利用全矢量有限元法对该传感器特性进行了数值研究, 发现D形光子晶体光纤的空气孔直径决定了定向耦合吸收峰的中心波长和温度传感的灵敏度, 金薄膜的厚度和D形结构的抛磨深度仅影响表面等离子体共振峰的相对强度. 结果表明: 该传感器在-10–80 ℃的温度范围内具有11.6 nm/℃的温度灵敏度, 在1.34–1.44折射率范围内折射率灵敏度最高可达26000 nm/RIU. 相似文献
10.
Wavelength-selective characteristics of high birefringence photonic crystal fiber with Au nanowires selectively filled in the cladding air holes 下载免费PDF全文
Filter characteristics of a designed gold-filled high birefringence photonic crystal fiber are investigated based on the finite element method. The wavelength filter resonances in the high birefringence photonic crystal fiber occur at different points for different polarized directions, and the resonance strength in the x-polarized case is much weaker than that in the y-polarized case. The much more obvious splitting filter characteristics and different resonance strength imply the study and application values in splitting and single polarization fiber devices. The simulation results show that increasing the number of the gold wires only enhances the resonance strength when there is no surface plasmon supermode formed. With the diameters of the gold wires increasing, the response wavelength moves to a longer wavelength, and the strength becomes stronger. When the diameter is increased to 1.4 μm, the response wavelength in the x-polarized case can be tuned to 1.318 μm, which is the communication wavelength. The strongest resonance occurs at 1.2375 μm in the y-polarized case, and the peaking loss can reach 435.83 dB/cm. 相似文献
11.
Jianqun Cheng 《Optics Communications》2011,284(21):5185-5188
A tunable and switchable multi-wavelength Erbium-doped photonic crystal fiber ring laser incorporating a length of single-mode highly nonlinear photonic crystal fiber is proposed and demonstrated experimentally. Stable dual-wavelength and triple-wavelength operations at room temperature are achieved by employing the highly nonlinear photonic crystal fiber to induce four-wave mixing effect and a polarization controller to vary the polarization states of propagation lights in the laser cavity. The laser cavity is free from any wavelength selection components. The laser obtains maximal 30 dB signal-to-noise ratio and the peak power fluctuations of lasing lines are less than 1.39 dB. 相似文献
12.
大型激光驱动器装置对光纤前端系统的输出脉冲能力提出了更高的要求,基于大模场光子晶体光纤的mJ级脉冲放大器技术是首先需要解决的关键技术问题。研究了大模场光子晶体的切割和熔接工艺,实现了全光纤结构集成。对1~10kHz重复频率、10ns脉宽、0.3nm线宽的方波脉冲进行了放大实验研究,对比研究了反向和正向泵浦方式对自发辐射放大的抑制效果,在1kHz获得0.6mJ,单横模脉冲输出,初步验证了基于此类系统获得大能量、高品质脉冲输出的能力。 相似文献
13.
One-dimensional photonic crystal structures for multiple channeled
filtering and polarization selective filtering in the terahertz
(THz) range are studied theoretically. The design of aperiodic photonic
quantum-well (APQW) structures for multiple channeled filtering and
different polarization filtering at arbitrary preassigned
frequencies are achieved by using the simulated annealing algorithm
with a special merit function. The parameters of these filters can
be expediently controlled and the transmission characters are
polarization dependent. Numerical simulations show that the designed
APQWs can meet the desired specification well. 相似文献
14.
大型激光驱动器装置对光纤前端系统的输出脉冲能力提出了更高的要求,基于大模场光子晶体光纤的mJ级脉冲放大器技术是首先需要解决的关键技术问题。研究了大模场光子晶体的切割和熔接工艺,实现了全光纤结构集成。对1~10 kHz重复频率、10 ns脉宽、0.3 nm线宽的方波脉冲进行了放大实验研究,对比研究了反向和正向泵浦方式对自发辐射放大的抑制效果,在1 kHz获得0.6 mJ,单横模脉冲输出,初步验证了基于此类系统获得大能量、高品质脉冲输出的能力。 相似文献
15.
多芯光纤的输出光束只能在远场和焦点附近实现良好的同相位超模合束,这种超模传输特性大大影响了多芯光纤的应用范围.一种新型中空Kagome光纤为解决这一难题提供了可行的方案,利用中空Kagome光纤可以实现七芯光纤输出模式的整形合束.本文利用中心波长800 nm的钛宝石飞秒激光作为激光源,耦合入七芯非线性光子晶体光纤,得到700 nm至1050 nm的展宽光谱,并实现同相位超模输出.随后,将非线性展宽之后的宽谱七芯光束耦合至Kagome光子晶体光纤中,从Kagome光纤输出光斑呈高斯分布的模式传输,不再演变回七芯模式,耦合效率71%.实验还进一步验证此方法适用于不同结构的多芯光纤,为多芯光纤在高功率激光等领域的应用提供了参考. 相似文献
16.
17.
18.
Designing analysis of the polarization beam splitter in two communication bands based on a gold-filled dual-core photonic crystal fiber 下载免费PDF全文
We design a novel kind of polarization beam splitter based on a gold-filled dual-core photonic crystal fiber (DC-PCF). Owing to filling with two gold wires in this DC-PCF, its coupling characteristics can be changed greatly by the second-order surface plasmon polariton (SPP) and the resonant coupling between the surface plasmon modes and the fiber-core guided modes can enhance the directional power transfer in the two fiber-cores. Numerical results by using the finite element method show the extinction ratio at the wavethlengths of 1.327 μm and 1.55 μm can reach -58 dB and -60 dB and the bandwidths as the extinction ratio better than -12 dB are about 54 nm and 47 nm, respectively. Compared with the gold-unfilled DC-PCF, a 1.746-mm-long gold-filled DC-PCF is better applied to the polarization beam splitter in the two communication bands of λ = 1.327 μm and 1.55 μm. 相似文献
19.