Improved staining of proteins in polyacrylamide gels including isoelectric focusing gels with clear background at nanogram sensitivity using Coomassie Brilliant Blue G-250 and R-250

An improved procedure for staining of proteins following separation in polyacrylamide gels is described which utilizes the colloidal properties of Coomassie Brilliant Blue G-250 and R-250. The new method is based on addition of 20% v/v methanol and higher concentrations of ammonium sulfate to the staining solution previously described. The method combines the advantage of much shorter staining time with high sensitivity, a clear background not requiring destaining, stepwise staining, and stable fixation after staining. The method has been applied to staining of polyacrylamide gels after sodium dodecyl sulfate-electrophoresis and isoelectric focusing in carrier ampholyte-generated pH gradients.     

Improved detection of lymphocyte membrane proteins in purified form and as a crude mixture using native and denaturing polyacrylamide gel electrophoresis by optimisation of coomassie brilliant blue and silver staining.

Optimised silver staining protocols were devised for the detection of membrane proteins in purified form and as a crude mixture. These were adduced in both sodium dodecyl sulphate (SDS) and native polyacrylamide gel electrophoresis and consisted of ethanol-acetic acid-formaldehyde fixation, Coomassie Brilliant Blue prestaining, Rapidfix pretreatment, formaldehyde enhancement and finally ammoniacal silver staining. With these modifications, numerous staining problems of membrane proteins were overcome. These included reduction in background staining, enhanced detection sensitivity in native gels, elimination of negative staining and the avoidance of metallic silver deposition on the gel surface. In overcoming these problems, some factors determining the colour and stainability of membrane proteins in their native state were determined. Both the anionic Coomassie Brilliant Blue dye and SDS detergent improved the sensitivity of silver staining in native gels, and ammoniacal silver was more sensitive than neutral silver, suggesting silver staining to be a charge dependent process.     

Counterion-dye staining for DNA in electrophoresed gels using indoine blue and methyl orange

In this study, we describe a sensitive staining method for DNA in agarose and polyacrylamide gels using organic visible dyes, indoine blue (IB) and methyl orange (MO). The counterion-dye staining method uses two oppositely charged dyes to form a hydrophobic ion pair complex in the staining solution. A decrease in the number of free forms of dyes in staining solution can enhance the selectivity of binding between the dye and DNA, and can reduce nonspecific background staining. As a result, the sensitivity of counterion-dye staining was significantly improved compared with other dye-based staining. This method uses a staining solution consisting of 0.008% IB, 0.002% MO, 10% ethanol and 0.2 M sodium acetate at pH 4.7, and can detect 5 ng of lambda DNA/HindIII within 60 min in agarose gels and 10 ng of PhiX174 DNA/HaeIII within 20 min in polyacrylamide gels.     

Application of Neuhoff's optimized Coomassie brilliant blue G-250/ammonium sulfate/phosphoric acid protein staining to ultrathin polyacrylamide gels on polyester films

An optimized Coomassie staining procedure, utilizing Coomassie Brilliant Blue G-250 in phosphoric acid/ammonium sulfate, was applied to ultrathin-layer isoelectric focusing in 0.18 mm polyacrylamide gels, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis in 0.38 mm polyacrylamide gels, both backed to Gel-Fix polyester supporting films. After isoelectric focusing staining of gelatin and acidic proteins was better with the phosphoric acid/ammonium sulfate procedure than with conventional organic solvent methods. When applied to gels after sodium dodecyl sulfate-polyacrylamide gel electrophoresis the sensitivity of the phosphoric acid/ammonium sulfate method was equal to that on conventional staining but lower than on silver staining.     

Stabilization of thin-layer agarose gels after isoelectric focusing with polyacrylamide enables reverse imidazole-zinc staining and facilitates two-dimensional gel electrophoresis

Large-pore-size agarose gels provide excellent resolving capacity for high molecular weight biomolecules. Thin-layer agarose isoelectric focusing (IEF) gels on polyester support films are especially useful for the separation of large proteins based on their pI in native conformation, but the method has suffered from the lack of detection methods compatible with agarose gels in hydrated form. Recently, an acrylamide copolymerization method was reported to enable mass-spectrometry-compatible silver staining and in-gel digestion of proteins. In this study, the method was further applied by demonstrating successful reverse imidazole-zinc staining of thin-layer agarose IEF gels copolymerized with acrylamide. The sensitivity of the reverse staining method on the composite gel at its best equaled the sensitivity of the traditional dried agarose silver staining method. Owing to the increased durability and reversible detection, the reverse-stained first-dimension gel could be conveniently prepared for the second-dimension sodium dodecyl sulfate polyacrylamide gel electrophoresis by reduction and alkylation. In addition, the micropreparative generation of tryptic peptides of Coomassie brilliant blue R-250 stained proteins in the composite gel is demonstrated.     

Detection of gelatinolytic enzyme activities after sodium dodecyl sulfate-electrophoresis and protein blotting

Visualization of proteases with gelatinolytic activity in sodium dodecyl sulfate gels is described. After conventional sodium dodecyl sulfate-polyacrylamide gel electrophoresis, proteins are transferred onto nitrocellulose membranes preincubated with 0.3% gelatine. During the protein electrotransfer, the proteases are renaturated and their enzymatic activity is restored. After nonspecific protein staining, bands with proteolytic activity appear as white areas on a dark background.     

Alternative methods for fixing and staining gliadins in polyacrylamide gels.

Staining efficiencies of Coomassie Brilliant Blue G-250 (CBB G-250) and Coomassie Brilliant Blue R-250 (CBB R-250) in various media were studied in efforts to reduce or eliminate requirements for trichloroacetic acid (TCA). Stained gels were compared with gels stained with CBB R-250 in 12% TCA and evaluated for overall stain and background. Because of qualitative effects, stain intensities of low- and high-mobility gliadins were also evaluated. Results indicated gliadins are fixed under a wide range of conditions, permitting adjustment of conditions to provide optimum staining. CBB G-250 and R-250 in tap water fixed and stained most gliadins. Best results were obtained with CBB G-250 in 2% TCA, in 2% TCA containing 5% sodium sulfate, and in 2% and 5% phosphoric acid containing 5% sodium chloride or 5% sodium sulfate. Gels stained in these media were more easily observed during staining and more easily destained than gels stained in CBB R-250 in 12% TCA.     

Practical aspects of fluorescent staining for proteomic applications

SYPRO Orange and SYPRO Ruby staining methods, modified for use with large-format two dimensional (2-D) gels, are compared to the manufacturer's recommended protocols to determine sensitivity and reproducibility of the new methods. This study examines the critical aspects of fixation, washing, and staining to develop an optimized fluorescent staining method. It was determined that careful control of sodium dodecyl sulfate (SDS) levels and pH in the gel was critical for successful staining with SYPRO Orange. Overnight fixation in 40% ethanol/2% acetic acid/0.0005% SDS preserved protein content, eliminated ampholyte-generated staining artifacts, and had no detrimental effects on staining. Three one-hour washes in 2% acetic acid/0.0005% SDS, followed by staining with SYPRO Orange diluted 1:5,000 with washing solution for 3 or more hours, produced high sensitivity, low background images using a STORM 860 laser scanner. Gels viewed two years after staining showed no significant changes with respect to the initial protein patterns, and allowed successful mass spectrometric postgel characterization of protein spots. Protocol changes applied to SYPRO Ruby staining improved the contrast of STORM 860-generated images, but had little impact on staining sensitivity. A comparison of the cost benefits of staining with SYPRO Orange vs. SYPRO Ruby is also discussed.     

Reverse zymography using fluorogenic substrates for protease inhibitor detection

A novel, sensitive method for detecting protease inhibitors by using fluorescent protease substrates in gels is described. The protease inhibitors were separated on sodium dodecyl sulfate (SDS)-polyacrylamide gels containing a copolymerized peptide substrate, namely 4-methyl-coumaryl-7-amide (MCA). As the incorporated substrates in the gel, Boc-Phe Ser-Arg-MCA was used for trypsin, Suc-Ala-Ala-Pro-Phe-MCA for alpha-chymotrypsin, and Z-Phe-Arg-MCA for papain. After electrophoresis, washing and incubating the gel with the target protease solutions allowed the substrate to be cleaved by the protease, and the release of the fluorescent 7 amino-4 methyl-coumarin (AMC), which was detected under a UV transilluminator. The uncleaved peptide-MCA substrate remained where the inhibitors were present, and was visualized as dark blue bands on the light-green fluorescent background gel. This new method offers several advantages over other previous methods including: (i) greatly increased sensitivity can be achieved in a shorter period of time, which may be useful for discovering new protease inhibitors in small amounts of crude material; (ii) the procedure is quite simple and quick since the incubation period is very short and no time is needed for staining and destaining steps; (iii) since these probes using substrate specificity/target proteases, they are excellent tools for detection and discrimination of unknown protease inhibitors for various target proteases.     

Polyelectrolyte diode: nonlinear current response of a junction between aqueous ionic gels

We demonstrate that a fixed junction between two aqueous gels containing oppositely charged polyelectrolytes could rectify electric current. The agarose-based gels were "doped" with sodium poly(styrene sulfonic acid) and poly(diallyl dimethylammonium chloride). The unidirectional current response of the interface between the cationic and anionic gels originates directly from anisotropy in the mobile ionic charges in the gels. The current depends on the concentration of polyelectrolyte, the background ionic concentration, and the distance traveled by the ions. The I-V curves from the devices demonstrated a combination of transient and stationary rectification effects. The current densities achieved were comparable to or higher than those obtained with previously reported organic semiconductor diodes. The diodes had good long-term stability in both DC and AC conduction modes. The materials and the process of preparation of these devices are simple, inexpensive, and scalable. They could be used in flexible and biocompatible electronic circuits.     

Improved silver staining procedure for fast staining in PhastSystem Development Unit. I. Staining of sodium dodecyl sulfate gels

A new modification of silver staining of proteins in sodium dodecyl sulfate polyacrylamide gels is adapted to automated staining in PhastSystem Development Unit. The use of a reduction step, after fixation, with thiosulfate in alcoholic sodium acetate buffer results in a considerable increase in sensitivity without the need for a recycling step. The detection limit is tenfold lower than in the silver staining procedure recommended so far for PhastSystem and corresponds to 0.05-0.1 ng protein per band. Total staining time with the new procedure is 75 min.     

An optimal method of DNA silver staining in polyacrylamide gels

A silver staining technique has widely been used to detect DNA fragments with high sensitivity on polyacrylamide gels. The conventional procedure of the silver staining is tedious, which takes about 40-60 min and needs five or six kinds of chemicals and four kinds of solutions. Although our previous improved method reduced several steps, it still needed six kinds of chemicals. The objective of this study was to improve further the existing procedures and develop an optimal method for DNA silver staining on polyacrylamide gels. The novel procedure could be completed with only four chemicals and two solutions within 20 min. The steps of ethanol, acetic acid, and nitric acid precession before silver impregnation have been eliminated and the minimal AgNO3 dose has been used in this up-to-date method. The polyacrylamide gel of the DNA silver staining displayed a golden yellow and transparent background with high sensitivity. The minimum 0.44 and 3.5 ng of DNA amount could be detected in denaturing and nondenaturing polyacrylamide gel, respectively. This result indicated that our optimal method can save time and cost, and still keep a high sensitivity for DNA staining in polyacrylamide gels.     

Fast and sensitive protein staining with colloidal acid violet 17 following isoelectric focusing in carrier ampholyte generated and immobilized pH gradients

A new method is described for fast and sensitive staining of proteins following isoelectric focusing in carrier ampholyte and immobilized pH gradient polyacrylamide gels. After fixation with trichloroacetic acid the gels are stained for 5-10 min with 0.1-0.2% colloidal Serva Violet 17 (generic name: Acid Violet 17; Color Index No. 42,650) in 10% w/v phosphoric acid. After staining for only 0.5-3 min, major zones, corresponding to 100-500 ng protein, are visible without destaining on a weak background. Detection of minor components requires destaining with 3% w/v phosphoric acid for 5-80 min depending on gel thickness (120-500 microns) and type of support (fabric reinforced versus gels backed to a polyester film). For selected pH marker proteins (bovine serum albumin, carbonic anhydrase, horse myoglobin) a staining sensitivity of 1-2 ng/mm2 protein is found. Dye elution from stained fabric reinforced gels with 50% v/v dioxane-water, followed by absorbance measurements, results in a linear relationship over a range of 1-100 micrograms marker proteins. Staining with collodial Serva Violet 17 is the only method available for fast and high sensitivity and low background staining of immobilized pH gradient gels, without interference from selective dye binding in different pH ranges. Staining with the collodial dye is convenient by avoiding organic solvents with unpleasant vapors and potentially hazardous.     

A new method for the preparation of polyacrylamide gradient gel-filled capillaries with low UV detection background

A simple but reproducible method has been explored for the preparation of polyacrylamide gradient gel-filled capillaries with low UV detection background. The principle is to fill a capillary by plugging it into a wide tube already filled with gradient gelling solutions including a section of buffer. Void-free capillaries can be prepared with a full success for gels below 13%T+5%C (immobilised completely). For gels between 15%T and 25%T+5%C, the preparation success rate is 80-95%, depending on the gel immobilisation methods. The resulting capillaries allow the use of any available wave-length for sensitive detection and in the separation of polylysines, a great improvement of their detection sensitivity has been achieved, up to 10(3)-10(4) fold as compared to the common gel-filled capillaries. Unlabelled polysaccharides from the sacculi of Escherichiacoli can hence directly be detected at 200 nm. These capillaries can continuously be used for more than 2 months in separating the biological polysaccharides at -200 V cm(-1) and pH 7.8 while at pH 4.7, they can still be used for more than 400 injections ( approximately 1 month) of the polylysines at +180 V cm(-1). As expected by stacking effect, the gradient gels yield higher efficiency or running speed (1-fold) and even higher UV detection sensitivity (>2-fold) than the homogeneous gels.     

Adaptive contrast enhancement of two-dimensional electrophoretic protein gel images facilitates visualization, orientation and alignment

2-DE is a powerful technique to discriminate post-translationally modified protein isoforms. However, all steps of 2-DE preparation and gel-staining may introduce unwanted artefacts, including inconsistent variation of background intensity over the entire 2-DE gel image. Background intensity variations limit the accuracy of gel orientation, overlay alignment and spot detection methods. We present a compact and efficient denoising algorithm that adaptively enhances the image contrast and then, through thresholding and median filtering, removes the gray-scale range covering the background. Applicability of the algorithm is demonstrated on immunoblots, isotope-labeled gels, and protein-stained gels. Validation is performed in contexts of (i) automatic gel orientation based on Hough transformation, (ii) overlay alignment based on cross correlation and (iii) spot detection. In gel stains with low background variability, e.g. Sypro Ruby, denoising will lower the spot detection sensitivity. In gel regions with high background levels denoising enhances spot detection. We propose that the denoising algorithm prepares images with high background for further automatic analysis, without requiring manual input on a gel-to-gel basis.     

Mass spectrometric imaging of immobilized pH gradient gels and creation of "virtual" two-dimensional gels

We have developed a matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) based technique for the detection of intact proteins directly from immobilized pH gradient gels (IPGs). The use of this technique to visualize proteins from IPGs was explored in this study. Whole cell Escherichia coli extracts of various loadings were separated on IPGs. These IPGs were processed to remove contaminants and to achieve matrix/analyte cocrystallization on the surface of the gel. Mass spectra were acquired by scanning the surface of the gel and were assimilated into a "virtual" two dimensional (2-D) gel. This virtual 2-D gel is analogous to a "classical" 2-D gel, except that the molecular weight information is acquired by mass spectrometry rather than by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). This mass spectrometry (MS) based technology exemplifies a number of desirable characteristics, some of which are not attainable with classical two-dimensional electrophoresis (2-DE). These include high sensitivity, high reproducibility, and an inherently higher resolution and mass accuracy than 2-D gels. Furthermore, there is a difference in selectivity exhibited between virtual 2-D gels and classical 2-D gels, as a number of proteins are visible in the virtual gel image that are not present in the stained gels and vice versa. In this report, virtual 2-D gels will be compared to classical 2-D gels to illustrate these features.     

Detection of glutathione reductase after electrophoresis on native or sodium dodecyl sulfate polyacrylamide gels

Commercial glutathione reductase (GR) from spinach and yeast (Saccharomyces cerevisiae) were stained on 7.5% native polyacrylamide gel electrophoresis (PAGE) gels or 15% sodium dodecyl sulfate (SDS)-PAGE gels with or without further purification by a 2',5'-ADP Sepharose 4B affinity column. For SDS-PAGE gels, the SDS was removed first by washing twice with 25% isopropanol in 10 mM Tris-HCl (pH 7.9) for 10 min. The gel was then dipped in a 50 mM Tris-HCl buffer (pH 7.9) containing 4.0 mM oxidized glutathione (GSSG), 1.5 mM NADPH, and 2 mM 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) for 20 min. The GR activity was negatively stained in the dark by a solution containing 1.2 mM 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and 1.6 mM phenazine methosulfate (PMS) for 5-10 min. The contrast between the clear zone of GR activity and the purple background was found in both native and SDS-PAGE gels. This negative staining method can detect GR as little as 0.064 units and 0.0032 units, respectively, for spinach and yeast sources. Under reduced SDS-PAGE gels, the GR activity band located on 72 kDa for spinach and 51 kDa for yeast. This fast and sensitive method could be used during enzyme purification and for characterization of GR from different sources under different physiological stages or conditions.     

A novel sodium bis(2-ethylhexyl) sulfosuccinate-PAGE system suitable for the separation of small peptides

A novel sodium bis(2-ethylhexyl) sulfosuccinate-PAGE (AOT-PAGE) system which delivers high resolution and sensitivity for small peptides with molecular masses of 0.8-17 kDa is described. Small peptides migrate more slowly and are less prone to leakage than in conventional SDS-PAGE, thus allowing for the in-gel detection with CBB R 250 of 0.5 mug of peptide. The system is also compatible with electroblotting, activity staining in renatured gels, and the peptide analysis by MALDI-MS. AOT-PAGE is simpler, more rapid, and cheaper than the generally adopted Tricine-SDS-PAGE method.     

ELECTROPHORETIC SEPARATION OF FUROCOUMARIN: DNA PHOTOADDUCTS

Abstract We describe a new approach for quantitating furocoumarin adducts in DNA using enzymatic hydrolysis followed by resolution and recovery of the adduct molecules by electrophoresis on polyacrylamide tube gels. The resolution of this method approaches that of high pressure liquid chromatography but at a considerably lower cost. Digestion conditions using DNase II and spleen phosphodiesterase II to yield mononucleotides and adducted bases were worked out for DNA containing 8-methoxypsoralen or 4'-hydroxymethyl-4,5',8-trimethylpsoralen. The phosphatase activity of DNase II was shown to be much more active on dNMPs than on adducted bases. This can be exploited to reduce the background of radioactivity from labeled dNMP's trailing into the adduct peaks, thereby increasing the effective sensitivity of the technique when quantitating adducts made with non-radioactive drug in labeled DNA. Since resolution of adducts requires dense (30%) acrylamide gels, we have devised a method for making extremely uniform high density gels by polymerization under static pressure. A continuous collection apparatus was constructed to recover material from gels. The identity of the resolved species was determined by several different methods, including analysis by HPLC.     

Lanthanide-based time-resolved luminescence immunoassays

The sensitive and specific detection of analytes such as proteins in biological samples is critical for a variety of applications, for example disease diagnosis. In immunoassays a signal in response to the concentration of analyte present is generated by use of antibodies labeled with radioisotopes, luminophores, or enzymes. All immunoassays suffer to some extent from the problem of the background signal observed in the absence of analyte, which limits the sensitivity and dynamic range that can be achieved. This is especially the case for homogeneous immunoassays and surface measurements on tissue sections and membranes, which typically have a high background because of sample autofluorescence. One way of minimizing background in immunoassays involves the use of lanthanide chelate labels. Luminescent lanthanide complexes have exceedingly long-lived luminescence in comparison with conventional fluorophores, enabling the short-lived background interferences to be removed via time-gated acquisition and delivering greater assay sensitivity and a broader dynamic range. This review highlights the potential of using lanthanide luminescence to design sensitive and specific immunoassays. Techniques for labeling biomolecules with lanthanide chelate tags are discussed, with aspects of chelate design. Microtitre plate-based heterogeneous and homogeneous assays are reviewed and compared in terms of sensitivity, dynamic range, and convenience. The great potential of surface-based time-resolved imaging techniques for biomolecules on gels, membranes, and tissue sections using lanthanide tracers in proteomics applications is also emphasized.