Metal-flee synthesis of amphiphilic functional polycarhonates

Amphiphilic block copolymers of poly（5-benzyloxy trimethylene carbonate） （PBTMC） and poly（ethylene glycol） （PEG） were synthesized through enzymatic polymerization using immobilized porcine pancreas lipase （IPPL）. The obtained copolymers with different compositions were characterized by GPC and IH NMR. The copolymer composition was in agreement with the feed ratio. The molecular weight of the copolymers showed an increasing trend with the decrease of PEG contents. MiceUes of the copolymers were formed by dialysis procedure, and characterized by transmission electron microscopy （TEM）.     

酶促开环聚合合成双亲性H型嵌段共聚物及其自组装

通过固定化酶Novozyme435（NV435）催化聚乙二醇（PEG）开环聚合己内酯（CL）得到端基带有羟基的ABA型三嵌段聚合物,用2,2-二氯代乙酰氯将聚合物的端羟基功能化形成H型大分子引发剂,在CuCl／HMTETA体系中引发4-乙烯基吡啶（4VP）进行原子转移自由基聚合反应（ATRP）,得到了具有两亲性的H型五嵌段聚合物（PVP）2-b—PCL-b．PEG-PCL-（PVP）2,用红外光谱（FT IR）,核磁共振（^1H NMR）,凝胶渗透色谱（GPC）对其结构与分子量及其分子量分布进行了表征,结果表明：H型五嵌段聚合物分子量46121g／mol,分子量分布1．30．并利用动态光散射（DLS）和原子力显微镜（AFM）对聚合物在水溶液中的自组装行为进行了研究,H型嵌段聚合物的胶束呈球形结构,平均直径为70nm左右．     

Controlled synthesis of amphiphilic block copolymers based on poly(isobutylene) macromonomers

The synthesis of a monoacrylate functionalized poly(isobutylene) (PIB) macromonomer (PIBA) has been achieved by a two‐step reaction starting from a commercially available PIB. Firstly, terminal olefins (vinylidene and trisubstituted olefin) of PIB were transformed to a phenolic residue by Friedel‐Crafts alkylation followed by subsequent esterification of the phenol with acryloyl chloride, catalyzed by triethylamine. PIBA structure was confirmed by ¹H‐NMR, ¹³C‐NMR and GPC before utilizing in the RAFT copolymerization with N,N‐dimethylacrylamide (DMA) to obtain statistical copolymers (P[(DMA‐co‐(PIBA)]). Monomer conversions were consistently higher than 85% for both DMA and PIBA as monomer feed composition was varied. Chain extension of poly(N,N‐dimethylacrylamide) with PIBA to synthesize block copolymers (P[(DMA‐b‐(PIBA)]) was also achieved with near quantitative monomer conversions (>97%). Block formation efficiency was not quantitative but purification of block copolymers was possible by selective precipitation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 634–643     

Synthesis and characterization of biodegradable amphiphilic PEG-grafted poly(DTC-co-CL)

<正>A novel biodegradable copolymer,poly(5,5-dibromomethyltrimethylene carbonate-co-ε-caprolactone)(poly(DBTC-co-CL)) with pendant bromine groups,was synthesized via ring-opening polymerization(ROP) ofε-caprolactone(CL) and 5,5- dibromomethyltrimethylene carbonate(DBTC) using stannous octoate(Sn(Oct)_2) as catalyst.Then the pendant bromine groups were completely converted into azide form,which permitted"click"reaction with alkyne-terminated polyethylene(A-PEG) by Huisgen 1,3-dipolar cycloadditions preparing biodegradable amphiphilic poly(DTC-co-CL)-g-PEG graft copolymer.The graft copolymer was characterized by nuclear magnetic resonance(NMR) and size-exclusion chromatography(SEC).     

功能性两亲嵌段共聚物的研究进展

功能性两亲嵌段共聚物因自身独特的性质而在靶向输送、控制释放、分子识别等领域得到广泛的应用.本文对这类嵌段共聚物的合成方法、其胶束的形成机理、制备形式、表征手段以及一些常见的具有光学活性的两亲嵌段共聚物及其应用进行了综述.     

窄分布两亲性嵌段共聚物的合成及其胶束化行为研究

利用原子转移自由基聚合合成了具有两亲性的嵌段聚合物聚苯乙烯-b-聚丙烯酸(PS-b-PAA),用FTIR,¹H NMR,SEC对其进行了表征,并利用荧光探针技术研究了其在水溶液中的胶束化行为.进一步的研究表明,PS-b-PAA胶束可对水中存在的多环芳香化合物芘有效地吸收并进而分离和回收.     

两亲性嵌段共聚物的自组装及载药胶束的研究

采用可逆-加成-断裂链转移自由基聚合(RAFT)技术合成了两亲性嵌段共聚物聚苯乙烯-b-聚甲基丙烯酸聚乙二醇单甲醚-b-聚苯乙烯(PSt-b-POEOMA-b-PSt),通过FT-IR、1 HNMR、GPC确定共聚物的结构。将三个具有不同嵌段比的共聚物在水溶液中自组装,通过透射电子显微镜(TEM)观察得到的胶束的形貌,发现随着亲水性嵌段的比例减小,胶束的直径略微减小。通过透析方法,以共聚物作为载体,负载维生素E,TEM观察载药胶束的形貌,仍然为核-壳状的球形胶束。差示扫描量热仪(DSC)测试共聚物载药胶束前后的热性能,发现药物分子在载入内核的过程中,聚苯乙烯的玻璃化转变温度(Tg)有所降低。通过紫外(UV)分析计算得出共聚物的药物负载量(DLC)为70%～80%。     

Synthesis of pH-responsive amphiphilic diblock copolymers containing polyisobutylene via oxyanion-initiated polymerization and their multiple self-assembly morphologies

 Two pH-responsive amphiphilic diblock copolymers, namely polyisobutylene-block-poly[2-(N,N-dimethylamino)ethyl methacrylate] (PIB-b-PDMAEMA) and polyisobutylene-block-poly(metharylic acid) (PIB-b-PMAA), were synthesized via oxyanion-initiated polymerization, and their multiple self-assembly behaviors have been studied. An exo-olefin-terminated highly reactive polyisobutylene (HRPIB) was first changed to hydroxyl-terminated PIB (PIB-OH) via hydroboration-oxidation of C＝C double bond in the chain end, and then reacted with KH to yield a potassium alcoholate of PIB (PIB-O^-K⁺). PIB-O^-K⁺ was immediately used as a macroinitiator to polymerize DMAEMA monomer, resulting in a cationic diblock copolymer PIB-b-PDMAEMA. With the similar synthesis procedure, the anionic diblock copolymer PIB-b-PMAA could be prepared via a combination of oxyanion-initiated polymerization of tert-butyl methacrylate (tBMA) and subsequent hydrolysis of tert-butyl ester groups in PtBMA block. The functional PIB and block copolymers have been fully characterized by ¹H-NMR, FT-IR spectroscopy, and gel permeation chromatography (GPC). These samples allowed us to systematically investigate the effects of block composition on the pH responsivity and various self-assembled morphologies of the copolymers in THF/water mixed solvent. Transmission electron microscopy (TEM) images revealed that these diblock copolymers containing small amount of original PIB without exo-olefin-terminated group are able to self-assemble into micelles, vesicles with different particle sizes and cylindrical aggregates, depending on various factors including block copolymer composition, solvent polarity and pH value.     

Ring-opening metathesis polymerization of cis-5-norbornene-endo-2,3-dicarboxylic anhydride derivatives using the grubbs third generation catalyst

A series of cis-5-norbornene-endo-2,3-dicarboxylic anhydride(NDCA,M1) derivatives(M2-M4) with different types of nonpolar substituted groups were synthesized and characterized by ~1H/~(13)C-NMR and mass spectrometry(MS). Ringopening metathesis polymerization(ROMP) of these monomers using the Grubbs third generation catalyst(G3) generated high molecular weight polymers with much improved solubility compared with the NDCA's homopolymer. It was found that the solubility of these polymers increased with increased substituent's steric hindrance. The living polymerization of NDCA derivative containing the bulkiest substituent(M4) catalyzed by G3 in tetrahydrofuran was confirmed by the kinetic studies with low polydispersity indices(PDI)( 1.30). By using sequential ROMP, well-defined diblock copolymers containing anhydride groups were synthesized.     

Structural effects of amphiphilic block copolymers on the gold nanoplates synthesis. Experimental and theoretical study

Geometric and multi-arms gold nanoplates were synthesized by direct reaction between two different amphiphilic block copolymers and KAuCl₄ in aqueous solution. Amphiphilic copolymers containing blocks of ε-caprolactone and N-vinyl-2-pyrrolidone were used. The block copolymer structures and concentration play a key role on the morphology and size of gold nanoparticles. Copolymers have a dual function as reductant and stabilizer agent. The gold nanoparticles obtained were characterized by transmission electron microscopy (TEM), UV–visible spectroscopy (UV–vis) and dynamic light scattering (DLS). On the other hand, electronic structure calculations, based on density functional theory were performed to support the experimental results. The simple models built with small clusters of gold and co-monomer units provide planar structures complexes with higher stabilization energies. These results agree with the nanoplates obtained experimentally. Moreover, the reactivity analysis based on monoelectronic properties suggests that the formation of aggregates between complexes is favored.     

Synthesis and characterization of amphiphilic triblock polymers by copper mediated living radical polymerization

2-Dimethylaminoethyl methacrylate (DMAEMA) and 2-diethylaminoethyl methacrylate (DEAEMA) block copolymers have been synthesized by using poly(ethylene glycol), poly(tetrahydrofuran) (PTHF) and poly(ethylene butylenes) macroinitiators with copper mediated living radical polymerization. The use of difunctional macroinitiator gave ABA block copolymers with narrow polydispersities (PDI) and controlled number average molecular weights (M_n’s). By using DMAEMA, polymerizations proceed with excellent first order kinetics indicative of well-controlled living polymerization. Online ¹H NMR monitoring has been used to investigate the polymerization of DEAEMA. The first order kinetic plots for the polymerization of DEAMA showed two different rate regimes ascribed to an induction period which is not observed for DMAEMA. ABA triblock copolymers with DMAEMA as the A blocks and PTHF or PBD as B blocks leads to amphiphilic block copolymers with M_n’s between 22 and 24 K (PDI 1.24-1.32) which form aggregates/micelles in solution. The critical aggregation concentrations, as determined by pyrene fluorimetry, are 0.07 and 0.03 g dm⁻¹ for PTHF- and PBD-containing triblocks respectively.     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

ABA型两亲嵌段共聚物的合成及表征

以α ,α′ 二溴代二甲苯为引发剂 ,CuBr/2 ,2′ 联吡啶为催化体系 ,制备了双溴端基的分子量分布窄的聚苯乙烯 (MWD =1 18) .再以此作为大分子引发剂 ,实现了甲基丙烯酸对硝基苯酯的原子转移自由基聚合 ,制得了分子量可控且分子量分布窄的ABA型嵌段共聚物 ,再经水解、酸化 ,得到了聚甲基丙烯酸 b 聚苯乙烯 b 聚甲基丙烯酸ABA型两亲嵌段共聚物     

Amphiphilic block copolymers by a combination of anionic polymerization and selective post-polymerization functionalization

Anionic polymerization is the oldest known living/controlled polymerization methodology that leads to well defined macromolecules. It has been also used, with considerable success, for the synthesis of amphiphilic block copolymers (AmBC), a class of functional copolymers having interesting self-assembling properties and high potential for applications in various technological fields. The use of mild and effective post-polymerization functionalization/chemical modification reactions on block copolymers has substantially increased the synthetic capabilities of anionic polymerization methodologies, toward the creation of a variety of AmBC. In this feature article we review work done on these directions in the last ten years. Some perspectives and future work on this particular field of polymer science are also discussed.     

Hydroxyl end-capped macromers of N-vinyl-2-pyrrolidinone as precursors of amphiphilic block copolymers

Telechelic N-vinyl-2-pyrrolidinone (NVP) oligomers terminated by hydroxyl groups were prepared by radical polymerization in the presence of functional chain transfer agents. Then hydroxy-terminated poly(NVP) was used as initiator in the ring opening polymerization of ε-caprolactone (ε-CL). Experiments were performed either under basic conditions or by using SnOct₂ or ZnEt₂ as catalyst. The resulting amphiphilic AB-type block copolymers were thoroughly characterized by spectroscopic and thermal techniques. These data and fractionation in protic solvents indicated that the copolymerization products are constituted by a mixture of copolymers with a wide composition range. The water-soluble copolymer fractions formed micelles and nanoaggregates that showed an appreciable capacity of loading piroxicam, a hydrophobic non-steroidal anti-inflammatory drug. Contact angle measurements, atomic force microscopy, and surface plasmon resonance measurements indicated that the surface of films prepared from the insoluble fractions does not have antiopsonizing properties in spite of their high hydrophilicity.     

新型线状-树枝状两亲嵌段共聚物的合成

本文设计合成了一系列由不同链长的聚丙烯酸(PAA)为亲水嵌段和不同代数聚苄醚树枝体(Dendr.PBE)为疏水嵌段的杂化共聚物(PAA-Dendr.PBE)。     

酶促聚合与ATRP结合合成聚己内酯和聚N,N-二甲氨基甲基丙烯酸乙酯嵌段共聚物及其自组装

摘要：用化学酶法合成聚己内酯（PCL）和聚N,N-二甲氨基甲基丙烯酸乙酯（PDMAEMA）双亲嵌段聚合物（PCL-b-PDMAEMA）。通过核磁共振（1H NMR）,红外光谱仪(FTIR-IR),凝胶渗透色谱(GPC) 对其结构以及分子量与其分子量分布情况进行了表征。对聚合物的溶液性质进行了研究,结果表明：临界胶束浓度（CMC）嵌段聚合物中疏水链段增多有利于形成胶束,表现为CMC降低,并具有较高的热力学稳定性。PDMAEMA是PH和温度敏感材料,研究发现,在不同的温度和pH值条件下表现不同的聚集状态, 当聚合物的pH值降低时平均流体力学直径增加,温度升高平均流体力学直径降低。     

Controlled synthesis of amphiphilic block copolymers with pendant glucose residues by living cationic polymerization

Amphiphilic block copolymers of vinyl ethers (VEs) of the type —[CH₂CH(OCH₂CH₂OR)]_m—[CH₂CH(OiBu)]_n—were synthesized by living cationic polymerization, where R is a D-glucose residue, and m and n are the degrees of polymerization (m = 20–50; n = 11–89). To obtain them, sequential living block copolymerization of isobutyl vinyl ether (IBVE) and the vinyl ether carrying 1,2:5,6-diisopropylidene-D -glucose residue was conducted by using the HCl adduct of IBVE, CH₃CH(OiBu)Cl, as initiator in conjunction with zinc iodide. These precursor block copolymers had a narrow molecular weight distribution (M̄_w/M̄_n ∼ 1.1) and a controlled composition. Treatment of them with a trifluoroacetic acid/water mixture led to the target amphiphiles. The solubility of the amphiphilic block copolymers in various solvents depended strongly on composition or the m/n ratio. Their solvent-cast thin films were observed, under a transmission electron microscope, to exhibit various microphase-separated surface morphologies such as spheres, cylinders, and lamellae, depending on composition. © 1997 John Wiley & Sons, Inc.     

Synthesis and characterization of H-type amphiphilic liquid crystalline block copolymers by ATRP

H-type amphiphilic liquid crystalline block copolymers containing azobenzene were synthesized by atom transfer radical polymerization （ATRP）. Macroinitiators prepared by the esterification between poly（ethylene oxide） （PEG） and 2,2-dichloroacetyl chloride were utilized to initiate the polymerization of 6-[4-（4-ethoxyphenylazo）phenoxy]hexyl rnethacrylate （M6C）. The resulting macroinitiators and block copolymers were characterized by ^1H NMR, gel permeation chromatography （GPC）. Polarizing optical microscopy （POM） and differential scanning calorimetry （DSC） preliminarily revealed the liquid crystalline property of these block copolymers. This series of liquid crystalline block copolymers are promising in some areas, such as optical data storage, optical switch, and molecular devices.