A theoretical study of radiation between two concentric spheres using a modified discrete ordinates method associated with Legendre transform

A modified discrete ordinates method (DOM) is used in spherical participating media. The radiative intensity is broken up into two components. One component is traced back to the enclosure's source. It is called direct intensity. The other component is rather traced back to the contribution of the medium itself. It is called diffuse intensity. Thus, the radiative transfer equation (RTE) is transformed into two simultaneous equations: a direct RTE and a diffuse RTE. The direct RTE is solved analytically. The diffuse RTE is solved numerically using the DOM. The streaming angular derivative term appearing in spherical geometry is modeled by making use of the Finite Legendre Transform. We study a pure radiation transfer problem between two concentric spheres. The medium is assumed to be gray and isotropically scattering. The limiting spheres are considered to be opaque, gray, diffusely emitting and diffusely reflecting with uniform emissivity over each surface. The obtained results are compared with available cases reported in the literature. In particular, relative importance of the direct radiation in optically thin media is studied.     

Radiative properties of densely packed spheres in semitransparent media: A new geometric optics approach

This contribution presents a new Ray-tracing method for calculating effective radiative properties of densely packed spheres in non-absorbing or semitransparent host medium. The method is restricted to the geometric optic objects and neglects the wave effects. The effective radiative properties such as the absorption and scattering coefficients, and phase function are retrieved from the calculation of mean-free paths of scattering and absorption, and the angular scattering probability of radiation propagating in the dispersed medium. The model accounts for the two geometric effects called here as non-point scattering and ray transportation effects. The successful comparison of the current model with data of radiative properties and transmittances of particle beds in a non-absorbing medium reported in the literature confirm its suitability. It is shown that: (i) for opaque or absorbing particles (not systematically opaque), the non-point scattering is the dominant geometric effects whereas both non-point scattering and ray transportation effects occur for weakly absorbing and transparent particles. In the later cases, these two geometric effects oppose and may cancel out. This may explain why the Independent scattering theory works well for packed of quasi-transparent particles; (ii) the non-point scattering and ray transportation effects can be captured through the scattering and absorption coefficients while using the classical form of phase function. This enables using the standard radiative transfer equation (RTE); (iii) the surrounding medium absorption can be accounted for without any homogenization rule. It contributes to increasing the effective absorption coefficient of the composite medium as expected but, at the same time, it reduces the particle extinction; and (iv) the current transfer calculation predicts remarkably the results of direct Monte Carlo (MC) simulation. This study tends therefore to confirm that the RTE can be applied to densely packed media by using effective radiative properties.     

基于瞬态辐射信号的各向同性散射均匀介质光学特性PSO反演

利用激光入射半透明介质时有限体积法（FVM）得到的时域反射和透射信号,结合标准微粒群（PSO）、随机微粒群（SPSO）和多相微粒群（MPPSO）三种不同的智能算法反演短脉冲激光辐照下各项同性散射均匀参与性介质的吸收系数和散射系数,结果表明三种微粒群算法都能够高效准确地反演均匀介质内的光学参数。     

Radiative and conductive heat transfer in a nongrey semitransparent medium. Application to fire protection curtains

This paper deals with heat transfer in nongrey media which scatter, absorb and emit radiation. Considering a two dimensional geometry, radiative and conductive phenomena through the medium have been taken into account. The radiative part of the problem was solved using the discrete ordinate method with classical S_n quadratures. The absorption and scattering coefficients involved in the radiative transfer equation (RTE) were obtained from the Mie theory. Conduction inside the medium was linked to the RTE through the energy conservation. Validation of the model has been achieved with several simulation of water spray curtains used as fire protection walls.     

多维梯度折射率介质内辐射传递的扩散近似

推导多维梯度折射率介质内稳态辐射传递的扩散近似方程.使用有限元法对扩散近似进行离散和求解,利用两个二维半透明介质的稳态辐射传递问题验证该扩散近似的精度及适用性.算例考虑介质为均匀折射率及梯度折射率两种情况.利用扩散近似分别求解辐射平衡时的边界热流、介质内温度场分布,并与辐射传递方程的求解结果进行对比分析.结果表明:介质折射率变化、散射特性、光学厚度及散射反照率均直接影响扩散近似的精度;在光学厚及强散射条件下,该扩散近似可以作为一种快速算法应用于梯度折射率介质稳态辐射传递的求解.     

Effect of reflecting modes on combined heat transfer within an anisotropic scattering slab

Under various interface reflecting modes, different transient thermal responses will occur in the media. Combined radiative-conductive heat transfer is investigated within a participating, anisotropic scattering gray planar slab. The two interfaces of the slab are considered to be diffuse and semitransparent. Using the ray tracing method, an anisotropic scattering radiative transfer model for diffuse reflection at boundaries is set up, and with the help of direct radiative transfer coefficients, corresponding radiative transfer coefficients (RTCs) are deduced. RTCs are used to calculate the radiative source term in energy equation. Transient energy equation is solved by the full implicit control-volume method under the external radiative-convective boundary conditions. The influences of two reflecting modes including both specular reflection and diffuse reflection on transient temperature fields and steady heat flux are examined. According to numerical results obtained in this paper, it is found that there exits great difference in thermal behavior between slabs with diffuse interfaces and that with specular interfaces for slabs with big refractive index.     

Meshless approach for coupled radiative and conductive heat transfer in one-dimensional graded index medium

A meshless local Petrov-Galerkin (MLPG) approach is employed for solving the coupled radiative and conductive heat transfer in a one-dimensional slab with graded index media. The angular distribution term in discrete ordinate equation of radiative transfer within a one-dimensional graded index slab is discretized by a step scheme, and the meshless approach for radiative transfer is based on the discrete ordinate equation. A moving least-squares approximation is used to construct the shape function. Two particular test cases for coupled radiative and conductive heat transfer within a one-dimensional graded index slab are examined to verify this new approximate method. The temperatures and the radiative heat fluxes are obtained. The results are compared with the other benchmark approximate solutions. By comparison, the results show that the MLPG approach has a good accuracy in solving the coupled radiative and conductive heat transfer in one-dimensional graded index media.     

On the derivation of vector radiative transfer equation for polarized radiative transport in graded index media

Light transport in graded index media follows a curved trajectory determined by Fermat's principle. Besides the effect of variation of the refractive index on the transport of radiative intensity, the curved ray trajectory will induce geometrical effects on the transport of polarization ellipse. This paper presents a complete derivation of vector radiative transfer equation for polarized radiation transport in absorption, emission and scattering graded index media. The derivation is based on the analysis of the conserved quantities for polarized light transport along curved trajectory and a novel approach. The obtained transfer equation can be considered as a generalization of the classic vector radiative transfer equation that is only valid for uniform refractive index media. Several variant forms of the transport equation are also presented, which include the form for Stokes parameters defined with a fixed reference and the Eulerian forms in the ray coordinate and in several common orthogonal coordinate systems.     

Parallel Jacobian-free Newton Krylov solution of the discrete ordinates method with flux limiters for 3D radiative transfer

The present study introduces a parallel Jacobian-free Newton Krylov (JFNK) general minimal residual (GMRES) solution for the discretized radiative transfer equation (RTE) in 3D, absorbing, emitting and scattering media. For the angular and spatial discretization of the RTE, the discrete ordinates method (DOM) and the finite volume method (FVM) including flux limiters are employed, respectively. Instead of forming and storing a large Jacobian matrix, JFNK methods allow for large memory savings as the required Jacobian-vector products are rather approximated by semiexact and numerical formulations, for which convergence and computational times are presented. Parallelization of the GMRES solution is introduced in a combined memory-shared/memory-distributed formulation that takes advantage of the fact that only large vector arrays remain in the JFNK process. Results are presented for 3D test cases including a simple homogeneous, isotropic medium and a more complex non-homogeneous, non-isothermal, absorbing–emitting and anisotropic scattering medium with collimated intensities. Additionally, convergence and stability of Gram–Schmidt and Householder orthogonalizations for the Arnoldi process in the parallel GMRES algorithms are discussed and analyzed. Overall, the introduction of JFNK methods results in a parallel, yet scalable to the tested 2048 processors, and memory affordable solution to 3D radiative transfer problems without compromising the accuracy and convergence of a Newton-like solution.     

Radiative transfer in stochastically inhomogeneous media

New radiative transfer theory is developed for stochastically inhomogeneous scattering media. The three-dimensional shapes and large scale (compared to the mean free path) structures of the media are modeled by stochastic interfaces separating regions of different scattering properties. The small scale fluctuations are characterized by a pair-correlation function. The radiative transfer equation is extended to include individual scattering and propagation probabilities of a ray for each subregion as well as the probability for a ray to cross the interface between two subregions. The propagation probability is found to depend on the entire preceding path of the ray; the present formulation accounts for the two previous scatterings. A new adding/doubling algorithm is developed to solve this problem numerically. Transmission through a cloud layer and backward scattering seem to be particularly sensitive to inhomogeneities.     

Modifications of discrete ordinate method for computations with high scattering anisotropy: Comparative analysis

A numerical accuracy analysis of the radiative transfer equation (RTE) solution based on separation of the diffuse light field into anisotropic and smooth parts is presented. The analysis uses three different algorithms based on the discrete ordinate method (DOM). Two methods, DOMAS and DOM2+, that do not use the truncation of the phase function, are compared against the TMS-method. DOMAS and DOM2+ use the Small-Angle Modification of RTE and the single scattering term, respectively, as anisotropic parts. The TMS method uses the Delta-M method for truncation of the phase function along with the single scattering correction. For reference, a standard discrete ordinate method, DOM, is also included in analysis. The obtained results for cases with high scattering anisotropy show that at low number of streams (16, 32) only DOMAS provides an accurate solution in the aureole area. Outside aureole, the convergence and accuracy of DOMAS, and TMS is found to be approximately similar: DOMAS was found more accurate in cases with coarse aerosol and liquid water cloud models, except low optical depth, while the TMS showed better results in case of ice cloud.     

Solving the atmospheric scattering optical transfer function using the multi-coupled single scattering method

The atmospheric scattering optical transfer function （OTF） is solved by applying the multi-coupled single scattering （MCSS） method to the three-dimensional radiative transfer equation （RTE） under the periodic ground condition. This approach is a direct hit to the atmospheric scattering OTF using the same original context of modulation transfer function （MTF） measurement, i.e., images of sinusoidal grating at different spatial frequencies. Both the amplitude and phase shift of the OTF at various zenith and azimuth angles can be obtained at an arbitrary spatial frequency.     

Numerical analyses of radiative heat transfer in any arbitrarily-shaped axisymmetric enclosures

A numerical approach for the treatment of radiative heat transfer in any irregularly-shaped axisymmetric enclosure filled with absorbing, emitting and scattering gray media is developed. Radiative transfer equation (RTE) is formulated for a general axisymmetric geometrical configurations, and the discretized equation is conducted using an unstructured meshes, generated by an appropriate computer algorithm, and the control volume finite element method which frequently adopted in CFD problems. A computer procedure has been done to solve the discretized RTE and to examine the accuracy and the computational efficiency of the proposed numerical approach. By using this computer algorithm, five test cases, a cylindrical enclosure with absorbing and emitting medium, a diffuser shaped axisymmetric enclosure, a finite axisymmetric cylindrical enclosure with a curved wall, a furnace with axially varying medium temperature and a rocket nozzle, are treated and the obtained results agree very well with other published works. Furthermore, the developed computer procedure has an accurate CPU time and it can be coupled easily with CFD codes.     

Control volume finite element method for radiation

In this paper a new methodology is presented by the authors for the numerical treatment of radiative heat transfer in emitting, absorbing and scattering media. This methodology is based on the utilisation of Control Volume Finite Element Method (CVFEM) and the use, for the first time, of matrix formulation of the discretized Radiative Transfer Equation (RTE). The advantages of the proposed methodology is to avoid problems that confronted when previous techniques are used to predict radiative heat transfer, essentially, in complex geometries and when there is scattering and/or non-black boundaries surfaces. Besides, the new formulation of the discretized RTE presented in this paper makes it possible to solve the algebraic system by direct or iterative numerical methods. The theoretical background of CVFEM and matrix formulation is presented in the text. The proposed technique is applied to different test problems, and the results compared favourably against other published works. Moreover this paper discusses in detail the effects of some radiative parameters, such as optical thickness and walls emissivities on the spatial evolution of the radiant heat flux. The numerical simulation of radiative heat transfer for different cases using the algorithm proposed in this work has shown that the developed computer procedure needs an accurate CPU time and is exempt of any numerical oscillations.     

Light Reflection and Transmission by layers with oriented spheroidal particles

On the basis of the numerical solution of the radiative transfer equation (RTE), the influence of non-sphericity of oriented spheroidal particles on radiation intensity formation in a layer with a multiple scattering regime is considered. For solving the RTE with characteristics depending on the propagation direction of the radiation beam, an algorithm is developed based on the method of layer doubling. Calculations are presented of angle correlations for intensities of radiation in a layer with Fresnel reflection on the boundaries, and reflection and transmission coefficients.     

模拟短脉冲激光在介质中传输的扩散综合有限元法

建立有限元模型,通过求解瞬态辐射传输方程模拟短脉冲激光在半透明介质中的传输.针对散射占优性半透明介质内辐射传输求解效率较差的问题,采用扩散综合加速迭代算法,提高计算效率,缩短计算时间.结果表明:采用精确解析式描述脉冲激光散射源项的求解策略可以获得准确的计算结果,精确地模拟快速变化的波前,不会产生数值扩散和数值振荡.此外,扩散综合迭代算法的计算时间仅为源项迭代的50%~60%.     

Multiple scattering by particles embedded in an absorbing medium. 2. Radiative transfer equation

This paper continues a systematic theoretical analysis of electromagnetic scattering by a group of arbitrarily sized, shaped, and oriented particles embedded in an absorbing, homogeneous, isotropic, and unbounded medium. The previously developed microphysical approach is used to derive the generalized form of the radiative transfer equation (RTE) applicable to a large group of sparsely, randomly, and uniformly distributed particles. The derivation of the RTE directly from the macroscopic Maxwell equations yields unambiguous and definitive analytical expressions for the participating quantities and thereby fully resolves the lasting controversy caused by the conflicting outcomes of several phenomenological approaches.     

Prediction of radiative heat transfer in 2D irregular geometries using the collocation spectral method based on body-fitted coordinates

Recently, an efficient numerical method, which is called the collocation spectral method (CSM), for radiative heat transfer problems, has been proposed by the present authors. In this numerical method there exists the exponential convergence rate, which can obtain a very high accuracy even using a small number of grids. In this article, the CSM based on body-fitted coordinates (BFC) is extended to simulate radiative heat transfer problems in participating medium confined in 2D complex geometries. This numerical method makes simultaneously the use of the merits of both the CSM and BFC. In this numerical approach, the radiative transfer equation (RTE) in orthogonal Cartesian coordinates should be transformed into the equation in body-fitted nonorthogonal curvilinear coordinates. In order to test the efficiency of the developed method, several 2D complex irregular enclosures with curved boundaries and containing an absorbing, emitting and scattering medium are examined. The results obtained by the CSM are assessed by comparing the predictions with those in references. These comparisons indicate that the CSM based on BFC can be recommended as a good option to solve radiative heat transfer problems in complex geometries.