The influence of annealing temperature on the structure,morphologies and optical properties of ZnO nanoparticles

ZnO nanoparticles (NPs) have been successfully synthesized by the simple solution method at low temperature. The effects of annealing temperature on the structure and optical properties of ZnO NPs were investigated in detail by X-ray diffraction, transmission electron microscopy (TEM), ultraviolet–visible (UV–vis) spectroscopy and photoluminescence (PL) measurements. As the annealing temperature was increased above 180 ^°C the particles morphology evolved from spherical to hexagonal shape, indicating that the average particle size increased from 11 nm to 87 nm. The UV-vis and PL spectra showed a red-shift from 3.62 to 3.33 eV when the annealing temperature was increased.     

Mn doped ZnO nanostructured thin films prepared by ultrasonic spray pyrolysis method

Mn-doped ZnO thin films with different percentage of Mn content (0, 1, 3 and 5 at.%) and substrate temperature of 350 °C, were deposited by a simple ultrasonic spray pyrolysis method under atmospheric pressure. We have studied the structural and optical properties by using X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR) and ultra-violet visible near infrared (UV–Vis-NIR) spectroscopy. The lattice parameters calculated for the Mn-doped ZnO from XRD pattern were found to be slightly larger than those of the undoped ZnO, which indicate substitution of Mn in ZnO lattice. Compared with the Raman spectra for ZnO pure films, the Mn-doping effect on the spectra is revealed by the presence of additional peak around 524 cm⁻¹ due to Mn incorporation. With increasing Mn doping the optical band gap increases indicating the Burstein–Moss effect.     

Microstructure and optical properties of ZnO nanoparticles prepared by a simple method

In this investigation, ZnO nanoparticles were prepared by a simple and rapid method. This method is based on the short time solid state milling and calcinations of zinc acetate and citric acid powders. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, photoluminescence and UV-vis spectroscopy. It was shown that the calcination temperature significantly affected the particle size and optical properties of the synthesized ZnO nanoparticles. Calculation based on the XRD data shows that the average sizes of ZnO particles are in agreement with those from TEM images and the size of the particles increases on increasing the calcination temperature. Also the band gap of samples decreased from 3.29 to 3.23 eV on increasing the calcination temperature from 350 to 600 °C. Photoluminescence analyses show that many defects such as interstitial zinc, zinc vacancy and oxygen vacancy are responsible for the observed optical properties.     

Green photoluminescence from highly oriented ZnO thin film for photovoltaic application

We report here the fabrication of ZnO nanoparticles embedded on glass substrate by sol–gel and spin coating technique. Transmission electron microscope images revealed that the thin film is composed of ZnO nanoparticles. X-ray diffraction data confirms that the fabricated ZnO nanoparticles have hexagonal unit cell structure. The ZnO nanocrystals of the thin film are oriented along the c-axis of the hexagonal unit cell. UV–vis absorption spectroscopy shows that the absorption occurring at 373 nm in the ZnO thin film. The band gap was calculated from the absorption data and found to be 3.76 eV. This band gap enhancement occurs due to size effect in the nanoscale regime. Room temperature photoluminescence spectrum shows strong green emission at 530 nm owing to the singly ionized oxygen vacancy. This green emission was further investigated by annealing the thin film at different temperature. This singular green emission will be very useful in optoelectronic and nanophotonic devices.     

One-pot synthesis and optical properties of monodisperse ZnSe colloidal microspheres

Monodisperse ZnSe colloidal microspheres were fabricated by a green one-pot wet chemical strategy through aggregation of primary nanoparticles without expensive organic additives or reductants involved. The as-prepared products were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectrum, X-ray photoelectron spectroscopy (XPS), UV–vis absorption and room-temperature photoluminescence techniques. The size-dependent optical spectra of as-obtained microspheres were blue-shifted in comparison with that of bulk ZnSe and exhibit near band edge luminescence, indicating the quantum confinement effect. The strong and stable blue emission band from the ZnSe colloidal microspheres indicates their potential applications as building blocks in photonic crystals.     

Synthesis and characterization of ZnO thin films by thermal evaporation

ZnO thin films have been successfully synthesized by thermal evaporation of pure zinc at 900 °C under the flow of different percentages of argon and oxygen gases. The films were characterized by X-ray diffraction (XRD), variable pressure scanning electron microscopy (VPSEM), energy dispersive X-ray spectroscopy (EDS) and UV–vis spectroscopy. The aim of this paper is to study the influence of the oxygen percentage on the structural and morphological properties of the ZnO films. VPSEM results show that very thick needle structures were produced at high oxygen percentages. EDS results revealed that only Zn and O are present in the sample, indicating a composition of pure ZnO. XRD results showed that the ZnO synthesized under different quantities of oxygen were crystalline with the hexagonal wurtzite structure. UV–vis spectroscopy results indicated that the optical band gap energies from the transmission spectrum are between 3.62 and 3.69 eV for ZnO thin films.     

A facile method to prepare monodispersed ZnO–Ag core-shell microspheres

Monodispersed and core-shell structured ZnO–Ag microspheres were realized by coating the Ag nanoparticles onto the surface of ZnO microspheres via a novel solution method. The obtained materials were characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and ultraviolet–visible (UV–Vis) absorption measurement. It was shown that face-center-cubic Ag nanoparticles with the mean size of 20 nm were successfully grown on the surface of ZnO microspheres. The absorption band of ZnO–Ag core-shell microspheres showed a large redshift comparing to pure Ag nanoparticles, indicating the strong interfacial interaction between ZnO and Ag. The effects of Ag coating thickness on the structure, morphology and optical absorption of ZnO–Ag core-shell microspheres were investigated. The discussion on the growth process of ZnO–Ag core-shell microspheres revealed the important role of Sn²⁺. This approach was simple, mild and readily scaled up, affording a simple method for the synthesis of size-tunable inorganic-metal core-shell nanostructures.     

Synthesis and characterization of CdS nanoparticles in the presence of oleic acid as solvent and stabilizer

Oleic acid (OA)-capped CdS nanoparticles (NPs) have been successfully synthesized via the direct reaction of Cd(CH₂COO)₂·2H₂O with S powder in OA solvent at 230 °C under nitrogen flow, which was a kind of clean and air-stable solvent. The morphologies and structures of the as-synthesized CdS NPs are examined by transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffractometer (XRD), and Fourier transform infrared (FTIR) spectroscopy, and the typical Ostwald ripening growth mechanism is concluded. Moreover, the collected ultraviolet–visible (UV–vis) absorption spectroscopy and photoluminescence (PL) spectroscopy demonstrate good optical properties of CdS NPs.     

Enhancement of optical properties and donor-related emissions in Y-doped ZnO

The Zn_1−xY_xO nanoparticles with good optical properties have been prepared by sol–gel method. The yttrium doping effect on the structures and optical properties were investigated by XRD, SEM, XPS and low temperature photoluminescence. The UV emission intensity of yttrium doped ZnO was over 300 times stronger than that of pure ZnO, which was an exciting result in enhancing the ultraviolet near band edge emission in photoluminescence from ZnO nanoparticles. The UV emission band of doped ZnO nanoparticles exhibits a red shift from 388 to 398 nm, indicating a shallow energy level near valence band has been formed due to the yttrium doping into ZnO lattices. The defect-related band is suppressed (I_D/I_UV = 1–0.83) considerably in Zn_1−xY_xO nanoparticles, revealing the quenching of the broad yellow-orange emission. The doping effect on the optical properties is investigated by temperature dependent photoluminescence. The experimental results indicated that the donor level of yttrium is deeper than that of undoped ZnO.     

Effect of surface on the optical structure and thermal properties of organically capped CdS nanoparticles

Cadmium sulfide (CdS) nanoparticles were synthesized by a novel wet chemical route with various organic thiol stabilizers. Systematic experimental studies, including X-ray diffraction (XRD), ultraviolet–visible (UV–vis) spectroscopy, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), photoluminescence (PL) spectroscopy, and time-resolved photoluminescence (TRPL), have evidenced that the stability, crystallinity, and optical properties of the CdS nanoparticles are affected by the organic groups which generate significant effects in surface reconstruction. Particle size was evaluated from UV–vis spectroscopy using the effective mass approximation (EMA) method and from XRD patterns based on Scherrer?s formula. The S–H vibrations are not detectable in the infrared (IR) spectra of any of the bound ligands, which are expected for thiols covalently bound to the surface of nanoparticles. PL studies reveal that the emission from the nanostructures is not much influenced by the surface states, indicating a good passivation of the particle?s surface. The time-resolved measurements reveal a biexponential decay behavior. The fast decay component is attributed to the recombination of core states, while the slow decay component of PL is associated with the charge-carrier recombination process with the involvement of surface states.     

Structural,morphological, optical and antibacterial activity of rod-shaped zinc oxide and manganese-doped zinc oxide nanoparticles

Pure ZnO and Mn-doped ZnO nanoparticles were synthesized by Co-precipitate method. The structural characterizations of the nanoparticles were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. UV–Vis, FTIR and photoluminescence (PL) spectroscopy were used for analysing the optical properties of the nanoparticles. XRD results revealed the formation of ZnO and Mn-doped ZnO nanoparticles with wurtzite crystal structure having average crystalline size of 39 and 20 nm. From UV–Vis studies, the optical band-gap energy of 3.20 and 3.25 eV was obtained for ZnO and Mn-doped ZnO nanoparticles, respectively. FTIR spectra confirm the presence of ZnO and Mn-doped ZnO nanoparticles. Photoluminescence analysis of all samples showed four main emission bands: a strong UV emission band, a weak blue band, a weak blue–green band and a weak green band indicating their high structural and optical qualities. The antibacterial efficiency of ZnO and Mn-doped ZnO nanoparticles were studied using disc diffusion method. The Mn-doped ZnO nanoparticles show better antibacterial activity when higher doping level is 10 at% and has longer duration of time.     

Effect of swift heavy ion irradiation on photoluminescence properties of ZnO/PMMA nanocomposite films

We report a study on the SHI induced modifications on structural and optical properties of ZnO/PMMA nanocomposite films. The ZnO nanoparticles were synthesized by the chemical route using 2-mercaptoethanol as a capping agent. The structure of ZnO nanoparticles was confirmed by XRD, SEM and TEM. These ZnO nanoparticles were dispersed in the PMMA matrix to form ZnO/PMMA nanocomposite films by the solution cast method. These ZnO/PMMA nanocomposite films were then irradiated by swift heavy ion irradiation (Ni⁸⁺ ion beam, 100 MeV) at a fluence of 1×10¹¹ ions/cm². The nanocomposite films were then characterized by XRD, UV-vis absorption spectroscopy and photoluminescence spectroscopy. As revealed from the absorption spectra, absorption edge is not changed by the irradiation but the optical absorption is increased. Enhanced green luminescence at about 527 nm and a less intense blue emission peak around 460 nm were observed after irradiation with respect to the pristine ZnO/PMMA nanocomposite film.     

Sol–gel derived ZnO nanoparticulate films for ultraviolet photodetector (UV) applications

Zinc oxide nanoparticles based UV detector was fabricated on thermally oxidized silicon substrate. ZnO nanoparticle films were deposited using sol–gel route. The seed solution was prepared using two different solvents (methanol and isopropyl alcohol (IPA)). The surface morphology of the prepared films was characterized by FESEM. Structural characterization along with optical measurements was carried out using XRD and UV–vis spectroscopy. For the UV photo-detector, ZnO thin film prepared in IPA is selected based on their structural and optical analysis. The changes in photo-response of ZnO thin film with respect to time was studied under the dark and variable UV intensities. It was observed that the photocurrent increased with a factor of 4.82 under 1.16 mW of UV intensity. It is believe that the synthesized ZnO thin films have potential to use in the ultraviolet photo-detector applications.     

Optical and electrical properties of undoped and (Mn, Co) co-doped ZnO nanoparticles synthesized by DC thermal plasma method

The undoped and (Mn, Co) co-doped ZnO nanopowders were synthesized through DC thermal plasma method. The pellets of this powder were annealed at 450, 550 and 650 °C for 1 h. Structural, chemical and optical properties of the samples were studied by XRD, SEM, EDX, UV–Vis and PL analysis. XRD spectra showed that all the samples were hexagonal wurtzite structure and as the annealing temperature increases the material becomes purer and more crystalline. It is seen that the optical band gap decreases when the ZnO is doped with manganese and cobalt. Photoluminescence intensity varies with doping because of the increment of oxygen vacancies. DC conductivity studies of the pellets were carried out at different temperatures (25–100 °C) and it was found that the activation energy for the electrical transport is high for (Mn, Co) co-doped ZnO than undoped ZnO.     

Third-order nonlinear optical properties of multiwalled carbon nanotubes modified by CdS nanoparticles

CdS nanoparticles were coated on the side wall of multiwalled carbon nanotubes (MWCNTs) by a wet chemical synthesis approach via noncovalent functionalization of MWCNTs with poly(diallyldimethylammonium chloride) (PDDA). The as-prepared material was characterized by X-ray diffraction (XRD), UV–vis absorption, fluorescence and transmission electron microscopy (TEM). The results indicated that CdS nanoparticles were uniformly coated on the surface of MWCNTs. Third-order optical nonlinearity of the as-prepared material was studied with the Z-scan technique with picosecond laser pulses at 532 nm. The Z-scan curve revealed that CdS nanoparticle-modified MWCNTs exhibited negative nonlinear refraction index and positive absorption coefficient. The real part and imaginary part of the third-order nonlinear susceptibility χ⁽³⁾ were calculated to be −4.9 × 10⁻¹² and 6.8 × 10⁻¹³ esu, respectively.     

Study of optical and thermal properties in nickel doped ZnS nanoparticles using surfactants

The presence of surfactants polyethylene glycol (PEG), polyvinyl pyrrolidone (PVP), sodium hexameta polyphosphate (SHMP) and tri-octyl phosphine oxide (TOPO) on the surface of Ni²⁺ doped ZnS (ZnS:Ni²⁺) nanoparticles resulted variation in their optical properties. The optical properties of each surfactant-capped ZnS:Ni²⁺ nanoparticles were investigated using UV–visible (UV–Vis) absorption and photoluminescence (PL) techniques. The absorption spectra and fluorescent emission spectra showed a significant blue shift compared to that of the bulk zinc sulfide. The effect of the optical properties in colloidal form (wet) and dry samples were investigated. Enhanced PL emission was observed for the dry samples at 80 °C. Thermal properties of the ZnS:Ni²⁺ was also studied using thermo gravimetric-differential thermal analysis (TG-DTA), Fourier transform infra-red spectrometer (FT-IR) and X-ray diffraction (XRD). The results are presented and discussed.     

Preparation, characterization and room temperature photoluminescence properties of a zinc oxide nanosheet network grown on glass substrate by a facile chemical route

An ultralong and ultrathin zinc oxide nanosheet network grown on glass substrate is prepared using an organic CTAB (cetyltrimethylammonium bromide, CH₃(CH₂)₁₅N⁺(CH₃)₃Br⁻) and the simple chemical materials (Zn(AC)₂·2H₂O and NaOH) by hydrothermal method. The morphology and microstructure of ZnO nanosheet network have been characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV–vis spectroscopy. The results revealed that the product grown on glass substrate was the ultralong and ultrathin zinc oxide nanosheet network and the crystalline hexagonal wurtzite ZnO crystal structure. The zinc oxide nanosheet network exhibits room temperature photoluminescence (RTPL) characteristics and three blue emissions located at 452, 459, and 469 nm, and a green emission located at about 494 nm were observed.     

Optical properties of ZnO nanoparticles synthesized by varying the sodium hydroxide to zinc acetate molar ratios using a Sol-Gel process

Material property dependence on the OH⁻/Zn²⁺ molar ratio of the precursor was investigated by varying the amount of NaOH during synthesis of ZnO. It was necessary to control the water content and temperature of the mixture to ensure the reproducibility. It was observed that the structural properties, particle size, photoluminescence intensity and wavelength of maximum intensity were influenced by the molar ratio of the precursor. The XRD spectra for ZnO nanoparticles show the entire peaks corresponding to the various planes of wurtzite ZnO, indicating a single phase. UV measurements show the absorption that comes from the ZnO nanoparticles in visible region. The absorption edge of these ZnO nanoparticles are shifted to higher energies and the determined band gap energies are blue shifted as the OH⁻/Zn² molar ration increases, due to the quantum confinement effects. The photoluminescence characterization of the ZnO nanostructures exhibited a broad emission band centred at green (600 nm) region for all molar ratios except for OH⁻/Zn²⁺ = 1.7 where a second blue emission around 468 nm was also observed. The photoluminescence properties of ZnO nanoparticles were largely determined by the size and surface properties of the nanoparticles.     

Synthesis and properties of CdSe Quantum Dot sensitized ZnO nanocomposites

In this work, zinc oxide nanocrystals with an average particle size of 13–22 nm are readily synthesized in aqueous medium by the wet synthesis method. Different sized nanocrystals obtained with change in calcination temperature are characterized by PL photoluminescence (PL) and UV–vis absorption spectroscopies, X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The average crystal size of the as prepared ZnO nanopowder is determined by XRD and was found to be in good agreement with the UV–vis absorption analysis. The quality of different ZnO nanopowders is confirmed by XRD spectra. On the basis of different characterizations, ZnO calcined for 1 h (due to its large size and less agglomeration) is chosen for synthesis of ZnO–CdSe nanocomposites with variable sized CdSe QD's (Quantum Dots). Nano-composites are synthesized using bifunctional linker molecule Mercaptopropionic Acid (MPA), and by directly adsorbing CdSe QD's over the surface of ZnO nanocrystals. The difference in charge transfer mechanism in ZnO–CdSe nanocomposites due to different crystallite size of CdSe QD's is studied. Higher crystallinity of ZnO–CdSe nanocomposites can be determined from XRD characterization. Size and mode of attachment in various ZnO–CdSe nanocomposites are determined by SEM studies.     

Size-dependent visible photoluminescence from ZnO nanoparticles prepared via SiO2 network

This study reports a simple method for the synthesis of different size of wurtzite ZnO nanoparticles in assistance of tetraethyl orthosilicate (TEOS). With the increase of the amount of TEOS added, the average size of ZnO nanoparticles was found decreased from ∼14.6 to ∼1.9 nm by characterization of X-ray diffraction (XRD) and high-resolution electron microscopy (HRTEM). The growth of ZnO nanoparticles is proposed to be controlled by the density of the SiO₂ chain mesh which is determined by TEOS amount in precursor. Ultraviolet–visible (UV–VIS) absorption and photoluminescence (PL) spectra show both shift to higher energy in cut-off edge and in visible emission bands respectively. The electron transition process in the mechanism of the visible emission shift was described and related to quantum size effect in ZnO nanoparticles.