Evaluation of spectral phase in spectrally resolved white-light interferometry: Comparative study of single-frame techniques

Spectral phase in a white-light interferogram contains information about the absolute optical path difference (OPD) in the interferometer. Evaluation of spectral phase is therefore important in applications such as profilometry with white light. In spectrally resolved white-light interferometry (SRWLI) the white-light interferogram is spectrally decomposed by a spectrometer in order to determine this phase. Several single-frame techniques in SRWLI have been proposed for the evaluation of the phase including Fourier transform, Hilbert transform, spatial phase shifting, windowed Fourier transform and wavelet transform. In this paper we present a comparative study of these techniques in this application in relation to the temporal phase-shifting technique which is a multi- frame method. Further, we also propose a modified method to remove the influence of source spectrum modulation in Hilbert transform procedure.     

窗口傅里叶变换轮廓术中窗口尺度选取的改进

多尺度窗口傅里叶变换法根据条纹信号的瞬时频率梯度来确定信号的局域平稳长度,再由局域平稳长度来控制窗口的尺度,即窗口的尺度和局域平稳长度成正比。使用多尺度窗口傅里叶变换法来使条纹信号的频谱局域化,可以在条纹信号的频率分辨率和空间分辨率之间达到一种较佳的调和。针对多尺度窗口傅里叶变换三维形貌测量技术中局域平稳长度提取算法的不足进行了改进,使窗口尺度的选取更具合理性,对变形光栅基频提取更精确,进一步减小了位相测量的误差。给出了理论分析、计算机模拟以及实验结果。     

Multiple-surface interference fringes analysis basing on wavelength-modulated phase shifting interferometry

Phase-shifting interferometry is widely used for high-precision surface measurements, but has difficulty in dealing with parallel optical plates. In this paper, an advanced method is proposed to simultaneously measure surface distributions of parallel optical plates from multiple surface interference fringes. The basic theory behind the technique is by applying wavelength-modulated phase shifting interferometry (WMPSI) to get enough frames of multiple surface interference fringes. In the procession of wavelength-modulated phase shifting, the phase variation for one point of the surface is traced and is processed by Fourier transform, and then the frequency spectrum of every surface can be separated from each other. Therefore, it allows extraction of front surface, back surface and thickness variation from multiple surface interference fringes with high precision.     

Method for eliminating zero spectrum in Fourier transform profilometry

Windowed Fourier transform (FT) is introduced into Fourier transform profilometry (FTP) to extract zero component included in deformed fringe pattern without capturing two fringe patterns with π phase difference. First, we extract zero component of deformed fringe image using windowed FT and normalize it, then calculate the normalized Fourier spectra of deformed fringe image, finally subtract the zero component from Fourier spectra of deformed fringe image. We give the theoretical analysis of the proposed method. The experiment is carried out to demonstrate that the method can eliminate zero component and extend the measurable slope of height variation to nearly three times of the conventional FTP.     

On window size selection in the windowed Fourier ridges algorithm: Addendum

The windowed Fourier transform is a useful technique for fringe pattern analysis. It has been shown that the proper selection of the window size is a balance between the linear phase approximation error and the influence of noise [Q. Kemao, On widow size selection in windowed Fourier ridges algorithm. Opt Lasers Eng, 2007, accepted for publication]. Since the fringe intensity and noise level usually vary spatially, the window size should also be spatially adaptive in order to reach a good balance for each pixel of the fringe pattern. This addendum first shows that the windowed Fourier transform with a spatially fixed window size (SFWS) is still practically useful and then discusses the window size competition strategies for the windowed Fourier transform with a spatially adaptive window size (SAWS). The windowed Fourier transform with a SAWS is theoretically better than that with a SFWS but it is also more challenging in use. The windowed Fourier ridges algorithm is used for analysis throughout this paper. This analysis is also applicable to the windowed Fourier filtering algorithm.     

A simple phase unwrapping approach based on filtering by windowed Fourier transform: A note on the threshold selection

A simple phase unwrapping approach based on windowed Fourier filtering was proposed recently [K. Qian et al. A simple phase unwrapping approach based on filtering by windowed Fourier transform. Opt Laser Technol 2005;37:458–62]. The windowed Fourier filtering algorithm is an essential ingredient that suppresses the noise effectively and makes the phase unwrapping trivial. This paper adds a note on the threshold selection in the windowed Fourier filtering algorithm. A large interval can be selected as the threshold to obtain almost optimal filtering results. Once the selected threshold is suitable, it is almost optimal. This makes the threshold selection in the windowed Fourier filtering algorithm extremely easy.     

三维测量中一种新的自适应窗口傅里叶相位提取法

针对多尺度窗口傅里叶变换中,窗口尺寸的自适应选取及提取基频时的频谱混叠等问题,提出基于希尔伯特-黄变换(HHT)的自适应窗口傅里叶相位提取法。对变形条纹信号进行HHT后,通过谱分析,自适应确定能够准确描述条纹信号变化情况的瞬时频率及条纹图的背景分量。根据所得的瞬时频率,给出自适应定位条纹信号局部平稳区域的步骤,进而确定窗口尺寸。不需额外计算,可有效去除背景分量以减少基频提取过程中零频频谱的干扰。与现有的用最大脊法确定窗口尺寸的方法相比,本方法不受被测相位必须线性逼近且变化缓慢的前提约束。实验证明本方法有效、可行,且对测量携带陡峭边缘或面形复杂的物体也能进行较为精确有效的测量。     

An improved windowed Fourier transform for fringe demodulation

A modified algorithm of windowed Fourier transform (WFT) for phase retrieval from electronic speckle-shearing fringe patterns with carriers is proposed. The algorithm is based on the introduction of a fast Fourier transform (FFT) in WFT to reduce computation time for fringe demodulation. Since boundary effects in FFT will influence the accuracy of phase retrieval, the Gerchberg method is employed to extrapolate the fringe pattern at the boundaries to reduce boundary effects. A theoretical analysis of the algorithm is presented. Both simulated and experimental results show that the proposed method has reduced the computation time significantly compared with the convolution method of WFT without sacrificing measurement accuracy.     

基于窗口傅里叶变换剪切干涉法波前检测

提出了一种利用二维窗口傅里叶变换从径向剪切干涉条纹中准确得到波前的重建技术。首先对剪切干涉条纹做二维窗口傅里叶变换,设置阈值和频率积分范围后,进行二维窗口傅里叶逆变换,然后对包裹相位做去载频和相位展开处理得到相位差分布,最后使用波前迭代算法从相位差中复原实际波前。模拟计算表明,使用该方法最大相位复原误差为0.82%,均方根值为0.020 9 rad,实验结果验证了该方法的有效性。同时也对窗口傅里叶变换的关键参数,如窗函数的选择、窗口大小的确定以及阈值的选取等进行了简要讨论。与传统傅里叶变换法(FFT)相比,基于窗口傅里叶变换的剪切干涉波前检测法有更高的精度和稳定性,为波前检测提供一种新的处理方法。     

Applications of windowed Fourier fringe analysis in optical measurement: A review

The applications of windowed Fourier fringe analysis in the past decade are reviewed. Because fringe patterns from different optical measurement systems are similar, the reviewed applications are classified according to the functions of the windowed Fourier transform being used in fringe pattern analysis: denosing exponential phase fields, demodulating carrier fringe patterns, getting phase derivatives, and utilizing local properties. From these applications, the windowed Fourier transform is shown to be effective and versatile for fringe pattern analysis.     

基于希尔伯特变换的干涉条纹相位解调新算法

提出了一种新的应用希尔伯特变换解调干涉条纹相位的算法,可以从单幅干涉条纹图中解调出全场相位分布.在实际应用中,常借助傅里叶变换实现希尔伯特变换算法,但是会忽略负频率成分,造成相位信息的丢失.对于相位分布非单调变化的干涉条纹,提出了一种判断函数,用来计算相位信息零频率点的分布.利用相位的零频率点分布构造了一个二元模板,使用该模板对本文提出的两次希尔伯特变换法产生的包裹相位图进行修正.对修正后的包裹相位图进行解包裹处理,可以得到连续的全场相位分布.对该方法用计算机模拟进行了验证.     

Quantitative vibration amplitude measurement with time-averaged digital speckle pattern interferometry

A new method of using time-averaged digital speckle pattern interferometry for the quantitative measurement of vibration amplitude was developed. Signal processing techniques especially the Hilbert transformation for quantitative evaluation of the Bessel fringes obtained in time-averaged digital speckle pattern interferometry were explored. The quadrature signal after Hilbert transformation is equivalent to a 90° phase-shifted interferogram for a monotonically increasing or decreasing phase function. An algorithm was developed for Bessel fringe contrast enhancement and phase extraction. The techniques were tested numerically and experimentally. Sub-fringe quantification of the time-averaged vibration fringes is realised with the proposed method. Compared with the commonly used phase shift method which requires a minimum of two images for image processing, this method requires only one fringe pattern for data extraction.     

傅里叶变换轮廓术中频谱泄漏的讨论

讨论了频谱泄漏对傅里叶变换轮廓术测量精度的影响。由于用傅里叶变换轮廓术进行三维面形测量时 ,测得的变形光场是空间有限函数 ,故离散傅里叶变换时先要进行周期拓展 ,如果拓展周期选择不当 ,拓展后的条纹将不连续 ,对之进行傅里叶变换会产生频谱泄漏。文章从理论上推导了拓展周期与变形结构光场频谱泄漏之间的关系 ,给出了由泄漏引起的视场边缘误差的计算模型和定量分析。提出采用条纹外插以减小泄漏误差的方法 ,计算机模拟及初步实验证实了该方法的有效性。     

基于Hough变换的数字全息干涉条纹检测

提出了一种利用Hough变换在图像中检测模糊直线条纹的有效方法.将Hough变换对随机噪音不敏感的特性与Fourier变换的性质相结合,可实现对图形中有相同周期条纹的检测.该方法不针对单一条纹,只识别相同周期条纹的总体特征,能有效避免条纹部分缺失对检测结果的影响,并能快速检测条纹的准确数量.将该方法应用于数字全息干涉图...     

Dynamic 3-D shape measurement method based on FTP

In this paper, we propose a method for dynamic three-dimensional (3-D) shape measurement based on Fourier transform profilometry. A sequence of dynamic deformed fringe images can be grabbed by a CCD camera and saved on a disk rapidly. By a Fourier transform, filtering and inverse Fourier transform, a sequence of phase-maps can be obtained. By unwrapping these phase maps in 3-D phase space, we can obtain the shape of the dynamic object at different times. In this paper we also propose the algorithm of a phase difference between two deformed fringes, and the 3-D phase unwrapping method based on the phase difference algorithm. The computer simulation and experiment results show that this method can efficiently deal with the dynamic 3-D shape measurement.     

Parameter estimation of optical fringes with quadratic phase using the fractional Fourier transform

Optical fringes with a quadratic phase are often encountered in optical metrology. Parameter estimation of such fringes plays an important role in interferometric measurements. A novel method is proposed for accurate and direct parameter estimation using the fractional Fourier transform (FRFT), even in the presence of noise and obstacles. We take Newton׳s rings fringe patterns and electronic speckle pattern interferometry (ESPI) interferograms as classic examples of optical fringes that have a quadratic phase and present simulation and experimental results demonstrating the performance of the proposed method.     

Generalized three-dimensional windowed Fourier transform for fringe analysis

A 3D windowed Fourier transform is proposed for fringe sequence analysis, which processes the joint spatial and temporal information of the fringe sequence simultaneously. The 2D windowed Fourier transform in the spatial domain and the 1D windowed Fourier transform in the temporal domain are two special cases of the proposed method. The principles of windowed Fourier filtering and windowed Fourier ridges are developed. Experimental verification shows encouraging results despite a longer processing time.     

成像型任意反射面速度干涉仪数据处理方法

 采用傅里叶变换方法,列出了对成像型任意反射面速度干涉仪得到的干涉条纹图进行处理的过程。利用文献结果,处理了冲击波整形时产生的有间断干涉条纹图,对处理结果进行了分析。结果表明：条纹图要干净,条纹间距清晰、均匀,应使用１维傅里叶变换的方法处理条纹图,减小滤波的难度。研究了冲击波测试当中条纹丢失的问题,提出了间断条纹图间断起始点相位确定的方法。对透明和不透明靶产生条纹图的不同进行了讨论,得出对透明靶产生的条纹图应采用适当的条纹外延技术进行预处理后再进行常规处理。     

Application of the FFT method for the quantitative extraction of information from high-resolution interferometric and photoelastic data

This paper describes the application of a digital Fourier transform to phase encoded intensity distribution. Attention is drawn to a method of extracting quantitative information automatically from the interferometric fringe data. To achieve this, a set of carrier fringes has been added to interferometric fringe data. This has made it possible to form a phase map using a FFT (fast Fourier transform) algorithm. A minimum spanning tree (MST) phase unwrapping strategy has been used to create a contiguous map of the whole fringe field. Finally, the measurement parameter related to the fringe field has been calculated from one single image. Experimental results are given for the burner flames, a compressible flow and photoelastic fringe data. It has been shown that the methods developed have the potential for use as reflection analysis systems suitable for applications to non-stationary objects and complicated fringe fields.     

Real-time quantitative phase imaging with a spatial phase-shifting algorithm

This Letter reports on the use of a spatial phase-shifting algorithm in a fast, straightforward method of real-time quantitative phase imaging. The computation time for phase extraction is five times faster than a Fourier transform and twice as fast as a Hilbert transform. The fact that the phase extraction from an interferogram of 512 × 512 pixels takes less than 8.93 ms with a typical desktop computer suggests the proposed method can be readily applied to high-speed dynamic quantitative phase imaging. The proposed method of quantitative phase imaging is effective and sufficiently general for application to the dynamic phenomena of biological samples.