基于Norland紫外固化胶的热光开关器件

采用新型聚合物材料Norland紫外固化胶（NOA）制备了聚合物M-Z型热光开关器件。对NOA薄膜材料的光学性质进行了表征,采用感应耦合等离子体（ICP）方法制备出形貌良好的波导器件。测得在1 550 nm波长下,长2.2 cm的直波导插入损耗为8.3 dB。在电极上施加直流信号,测得热光开关的消光比为11 dB,驱动功率为85 mW。引入直流偏置网络,获得了器件的开关特性曲线,测得开关器件的上升时间为1.085 ms,下降时间为489.5μs。实验结果表明：NOA材料在热光开关及其它聚合物光波导集成器件的制备中具有很大的应用潜力。     

Design and optimization of novel ultra-compact SOI multimode interference optical switch

In this paper, an ultra-compact 3 × 3 SOI multimode interference optical switch is presented. There is only one hyperbolic multimode waveguide in the switch. By changing the refractive index of one or two parts within the hyperbolic multimode waveguide, the switch can realize on and off functions between any pair of input and output ports. The various states of the switch were simulated and analyzed using the finite difference beam propagation method (FD-BPM), the structure parameters of the switch were also designed and optimized. The optimized switch has excellent properties and the whole size of the switch is less than 4 mm.     

A 1 × 2 optical switch using one multimode interference region

A 1 × 2 optical switch using only one multimode interference (MMI) region is designed and demonstrated in GaAs/AlGaAs. This design makes a single MMI region works as MMI coupler using paired interference at “off” state and symmetric interference at “on” state. By injecting a current of 110 mA, the measured on/off ratio and crosstalk are 23 dB and 33 dB, respectively in the demonstrated device with GaAs/GaAlAs.     

Electro-optic polymer assisted optical switch based on silicon slot structure

One kind of electro-optic polymer assisted Mach-Zehnder optical switch based on silicon slot structure is presented in this paper. The interference arms of the switch are slot structures instead of regular single-mode waveguides. By filling electro-optic material in the void slot of the arms, direct electro-optic modulation can be introduced. Theoretical model and detailed analysis are given in this paper. The length-independent product V_πL is about 74 mV cm when slot width is 100 nm, and 37 mV cm when slot width is 50 nm, when the polymer with a electro-optical coefficient of γ₃₃ = 130 pm/V is assisted. An ultralow energy consumption of only 37 fJ/bit is achievable, and the turn-on time of the switch is less than 1.5 ps.     

Crosstalk improvement of a thermo-optic polymer waveguide MZI-MMI switch

A 2 × 2 MZI-MMI switch based on thermo-optic effect with a ridge in the silicon substrate was proposed and the performance of switch was simulated. The main purpose behind this change in substrate layer is to localize the heating at a heated arm single mode waveguide and limit the increasing temperature at a second one. The switch performance of the device should be improved, compare to the usual one. Using finite difference beam propagation method (FD-BPM) and thermal computing simulation based on finite element method (FEM), the results clearly indicate that the MZI-MMI switch can satisfy −31 dB crosstalk at two states.     

Fabrication and characterization of polymer thermo-optic switch based on mmi coupler

The 2 × 2 polymer thermo-optic switch based on MMI coupler is realized. This device is fabricated using standard fabrication techniques such as coating, photolithography, and dry etching. A crosstalk level of −36.2 dB is achieved at cross and bar states. A power consumption of 1.85 mW is applied to change the state of the switch from the cross to the bar state. A switching time of less than 0.7 ms is traced to change a state of the realized switch.     

Flexible integration of optical switch with optical power splitting and attenuating functions for optical fiber-based networking applications

A flexible integration of optical switch with optical power splitting and attenuating functions has been proposed to optimally serve optical fiber-based networking applications. In this switch, an etched binary-slope sidewall reflector is electrostatically actuated in and out of the plane to manipulate optical signals between input and output optical fibers. The fabrication process is a simple combination of a bulk-silicon micromachining process and silicon-to-glass anodic bonding where fiber alignment grooves, reflectors and actuators are fabricated on the same silicon substrate. Ball-lensed fibers are assembled with the device to achieve high coupling efficiency. Performances of the fabricated devices are measured and discussed. The switching time is less than 9 ms at 31 V. The excess loss of the device is less than 3 dB and the controllable attenuation range is up to 38 dB at 139 V, respectively. Moreover, polarization-dependent loss is less than 0.7 dB in the whole attenuation and splitting range.     

AWG and EDFA based optical packet switch using feedback shared loop buffer memory

Optical packet switching provides high speed, data rate/format transparency, efficient use of bandwidth and flexibility. The major problem in the implementation of “all-optical” switching is contention which occurs when two or more packets arrive at the same time for the same destination. To resolve the contention, we have proposed an optical packet switch architecture based on WDM loop buffer memory in the feedback configuration. In that architecture, the contending packets are stored in a loop buffer module, and routed in the free time slots. The buffering duration in the recirculating loop is limited by a circulation limit. The analysis was been done to obtain the maximum number of allowed circulations. This paper proposes improved version of that optical packet switch architecture, to increase the number of maximum allowed circulations. The modification is done either by adding an extra erbium doped fiber amplifier (EDFA) in the original switch or by replacing the core space switch with arrayed waveguide grating (AWG). The performance analysis has been done by the simulations.     

感应耦合等离子体刻蚀在聚合物光波导制作中的应用

提出了利用感应耦合等离子体(ICP)刻蚀技术提高聚合物光波导器件性能的方法,介绍了ICP刻蚀技术的原理和优点。选取聚甲基丙烯酸甲酯-甲基丙烯酸环氧丙酯(P(MMA-GMA))作为波导材料,采用氧气作为刻蚀气体,研究了ICP参数变化对刻蚀效果的影响。介绍了倒脊形光波导的制备过程,采用改变单一工艺参数的方法,分析了刻蚀效果随时间、功率、压强、气体流量等参数的变化,对参数优化后刻蚀得到的凹槽和平板结构进行了表征。实验结果表明:在天线射频功率为300 W,偏置射频功率为30 W,气体压强为0.5 Pa,氧气流速为50 cm³/min的条件下,可获得侧壁陡直、底面平整的P(MMA-GMA)凹槽结构。     

Cellulose acetate polymer film modified microstructured polymer optical fiber towards a nitrite optical probe

A novel microstructured polymer optical fiber (MPOF) probe for nitrites (NO₂⁻) detection was made by forming rhodamine 6G (Rh 6G)-doped cellulose acetate (CA) on the side wall of array holes in a MPOF. It was found that the MPOF probe only have a response to nitrites in a certain concentration of sulfuric acid solution. The calibration graph of fluorescence intensity versus nitrites concentration was linear in the range of 2.0 × 10^− 4 g/ml-5.0 × 10^− 3 g/ml. The method possesses ease of chemical modification, low cost design, and potential for direct integration with existing instrumentation, and has been applied to the determination of nitrites in real samples with satisfactory results.     

大电流两电极气体开关研究

由于引燃管难以满足现在能源系统对放电开关承受大电流的要求,因此研制了大电荷转移量两电极气体开关。这种新型气体开关电极间距可调,无触发极,采用同轴结构,并将主电极置于金属腔体内,减少了放电对绝缘支撑的污染。主电极为铜钨合金材料,设计为平顶圆柱状,以提高烧蚀均匀度和热传导效率,减少电极材料喷溅,延长其寿命。绝缘支撑采用碗状结构,提高了机械强度,增加了沿面击穿距离。该开关工作电压达25 kV,放电电流超过100 kA（脉冲宽度600 μs）,单次脉冲电荷转移量达50 C。实验结果显示该气体开关触发性能稳定,电极表面烧蚀均匀,多次大电流实验后电极表面保持完好,可应用于强激光能源系统。     

微细笔直写聚合物条形光波导的研究

提出一种采用微细笔直写技术直写聚合物光波导的简便方法，利用该技术成功直写出了氟化聚酰胺条形光波导，并着重研究了气体压力和直写速度对波导宽度的影响规律。实验结果表明：直写获得的条形波导的边缘整齐、表面光滑，而且不存在小孔等缺陷或杂质。当其他工艺参数不变的情况下，波导宽度随着气体压力的增加而增大，随着直写速度的增大而减小。微细笔直写获得的条形光波导成功地实现了通光，在波长为1550nm处的最小传输损耗为0.59dB/cm。     

Design of ternary Multiplexer and De-multiplexer circuit with optical nonlinear material (OPNLM) based switch

Multiplexer and De-multiplexer operation play a very important role in all-optical computation, communication and control. Considerable number of multiplexing – de-multiplexing scheme in digital optical processing have already been reported. A design of all-optical ternary Multiplexer De-multiplexer circuit with optical nonlinear material (OPNLM) based switch is proposed and described in this paper. Different logic states have been represented by different polarization states of light. Logical simulation is also included here. This circuit will be useful in future all-optical multi-valued logic based computing and information processing system.     

Optical computation based on nonlinear total reflectional optical switch at the interface

A new scheme of binary half adder and full adder is proposed. It realizes a kind of all-optical computation which is based on the polarization coding technique and the nonlinear total reflectional optical switches.      

Silver nanocrystals modified microstructured polymer optical fibres for chemical and optical sensing

In-fibre chemical and optical sensors based on silver nanocrystals modified microstructured polymer optical fibres (MPOFs) were demonstrated. The silver nanocrystals modified MPOFs were formed by direct chemical reduction of silver ammonia complex ions on the templates of array holes in the microstructure polymer optical fibres. The nanotube-like and nanoisland-like Ag-modified MPOFs could be obtained by adjusting the conditions of Ag-formation in the air holes of MPOFs. SEM images showed that the higher concentration of the reaction solution (silver ammonia 0.5 mol/L, glucose 0.25 mol/L), gave rise to a tubular silver layer in MPOF, while the lower concentration (silver ammonia 0.1 M, glucose 0.05 M) produced an island-like Ag nanocrystal modified MPOF. The tubular Ag-MPOF composite fibre was conductive and could be directly used as array electrodes in electrochemical analyses. It displayed high electrochemical activity on sensing nitrate or nitrite ions. The enhanced fluorescence of dye molecules was observed when the island-like Ag-modified MPOF was inserted into a fluorescent dye solution.     

数字光开关网络中四功能交换开关光学Omega网络

本文提出了一种用于数字光开关网络中，四功能交换开关光学Ｏｍｅｇａ网络。文中详细地阐述了用液晶空间光调制方法实现光学四功能交换开关，和Ｏｍｅｇａ互连网络的原理，并给出了光学系统和实验结果。     

Gradient force pattern, focal shift, and focal switch in an apodized optical system

In this paper, the evolution of the gradient force pattern, focal shift, and focal switch induced by a three-portion pure phase-shifting apodizer is numerically investigated in detail. The results show that the proposed apodizer may induce tunable gradient force on the particles in the focal region, focal shift, and focal switch. By adjusting the geometrical parameters of the phase-shifting apodizer, multiple traps may occur with changeable distance between them, and the shape of the optical trap also evolves evidently. More interestingly, for certain geometrical parameters of the proposed apodizer, by changing the phase shift of inner annular portion, the considerable focal shift may occur with focal switch accompanying, which is discussed to show that this kind of apodizer may be a very promising method of transporting trapped particles.     

Ternary Galois field arithmetic operations with optical nonlinear material (OPNLM) switch

Ternary Galois field (GF3) arithmetic can take an important and significant role in future information processing with multi-valued logic (MVL). An all optical circuit for two arithmetical operations (addition and multiplication) in ternary Galois field with OPNLM switch is proposed and discussed. The different states of polarization of light are taken as different logic states. An outline of Ternary Galois field sum of product (TGFSOP) is also discussed. Mathematical simulation has confirmed the result.     

Design and fabrication of a three-dimensional polymer optical waveguide polarization splitter

We present a design and fabrication of a three-dimensional polymer optical waveguide polarization splitter by taking into consideration of the induced birefringence effect of the polymer. We show that it is not possible to couple TM light from one waveguide to the other but evanescent coupling for TE light is possible. Hence the polarization splitter can be designed by considering TE mode coupling alone. This has an advantage of short interaction length of the device. Based on this consideration, we fabricated a polarization splitter with a TE extinction ratio of 15 dB and TM extinction ratio of 21 dB.     

Analysis and optimization of optical bistability in one-dimensional nonlinear photonic crystal with (HL)(D)(LH) and (LH)(D)(HL) structures

Although one-dimensional nonlinear photonic crystal (1D-NPC) has been widely studied, there is no comprehensive analysis on decreasing the bistability threshold power.In this paper, conditions required to create bistability have been specified for two types of structures of alternative high and low refractive index layers and defect layers with Kerr nonlinearity effect, in the order of (HL)^p(D)^q(LH)^p and (LH)^p(D)^q(HL)^p, where L and H denote low and high refractive index layers, respectively, D stands for the defect layers, p is the number of LH or HL layers and q is the number of defect layers.One of the essentials for the bistability is appropriate shifts of frequency of the defect mode, so the effect of the order of layer's arrangement in (1D-NPC) structures have been studied. Different structures have been introduced and the best structure for the lowest bistability threshold power has been proposed. Nonlinear finite-difference time-domain (NFDTD) in C++ has been employed for simulation.