Shear-induced crystallization in phase-separated blend of isotactic polypropylene and poly (ethylene-co-octene)

Isothermal crystallization after shear in a blend of isotactic polypropylene (iPP) and poly (ethylene-co-octene) (PEOc) was investigated by in situ optical microscopy and shear hot stage under various thermal and shear histories. Crystalline cylindrites during growth were observed in phase-separated iPPPEOc blends for the first time. According to our results, the very long cylindrites are formed which are much longer than the dimensions of the liquid-liquid phase-separated domains under shear, and the cylindrites appear to grow through noncrystallizable domains, as well as through crystallizable ones. Obviously, the nuclei ("shish") come from the oriented and entangled network strands instead of pulled-out long chains. The number of cylindrites and the distortion and breakup of the cylindrites are related to the shear rate and shear time. On the other hand, the number of spherulites increases not only with shear rate but also with liquid-liquid phase separation time. Spherulites always form with longer induction time than cylindrites due to the different nucleation mechanism. The shish is nucleated through the shear-induced mechanism, and most of the spherulites are nucleated through liquid-liquid spinodal decomposition and crossover after the cessation of shear. During the process of experiments, we also found three kinds of shish-kebab structures, which provide further physical insights into the mechanism of the shish formation in polymer blend after liquid-liquid phase separation under shear.     

Liquid crystalline side chain polymer with a poly (Geraniol-co-MMA) backbone and phenylbenzoate mesogenic group: synthesis and characterization

A new side chain liquid crystalline polymers have been synthesized and characterized in which [geraniol-co-MMA] polymer are used as a backbone linked via polymethylene spacer to phenyl benzoate mesogenic group. The polymer exhibits enantiotropic liquid crystallinity with nematic phase and does not exhibit side chain crystallization .A clear difference between the nature of the mesophase is evidenced between [Geraniol-co-MMA] main chain and methacrylate polymers .The LC polymer exhibit glass transition at 40 °C. In a comparative analysis, we discuss the relevance of polymer backbone in the synthesis of side chain liquid crystalline polymers.     

Alkaline-solution-induced crystallization in poly(butylene terephthalate)

Subtle crystalline structure changes of poly(butylene terephthalate) (PBT) specimens treated with an alkali solution at room temperature were investigated with the grazing incidence X-ray diffraction (GIXRD) analysis method. A new phenomenon was found: the aqueous alkali solution induced the crystallization of the PBT polymer. Under the GIXRD analysis condition of an incidence angle of 1°, the penetration depth of the X-ray in PBT was less than 80 μm, and this agreed well with the rough theoretical estimation. The alkali solution adopted in this study was an aqueous sodium hydroxide solution, which had a concentration of 2.5 N. Dissolved quantities of the surface layers during the alkaline treatment were found to be small. No appreciable intrinsic viscosity change due to the alkaline treatment was detected. Possible factors that might contribute to the crystallization, such as water absorption and a chemical reagent effect, were examined, and a plausible explanation for the phenomenon was developed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1938–1948, 2004     

Competition of phase dissolution and crystallization in poly(ε-caprolactone)/poly(styrene-co-acrylonitrile) blend

Blend of poly(ε-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) (SAN) containing 27.5 wt% of acrylonitrile was studied. The PCL/SAN blend having LCST (lower critical solution temperature) phase boundary above the melting point T_m of PCL offered an excellent opportunity to investigate the competition of liquid-solid phase transition (crystallization) and liquid-liquid phase transition (phase dissolution). A blend with the critical composition (80/20 PCL/SAN) underwent a temperature-jump above LCST to proceed spinodal decomposition, yielding a regularly phase-separated structure (SD structure). Then, it was quenched to the temperatures below T_m at which both the crystallization and the phase dissolution could occur. By transmission electron microscopy it was found that during isothermal annealing after quenching to high temperatures close to T_m (e.g. 51 °C), the SD structure gradually disappeared, and then the crystallization started from a single-phase mixture to yield normal crystalline structure similar to that of a neat crystalline polymer. At lower temperatures (e.g. 40 °C), crystallization quickly occurred and the SD structure was preserved, implying that the crystallization prevailed over the dissolution yielding a bi-continuous structure consisting of amorphous (SAN-rich) and crystalline (PCL-rich) regions. At intermediate temperatures (e.g. 45 °C), the phase dissolution competed with the crystallization, resulting in a bi-continuous structure with longer periodic distance and a broad boundary having a gradient in composition of amorphous region between PCL crystal lamellae. Light-scattering analysis quantitatively revealed a competition of the crystallization and the phase dissolution in terms of the crystallization rate (from H_v scattering) and the apparent diffusion coefficient for dissolution (from V_v scattering).     

Effects of chemical variations on the mesophase behavior of new fluorinated poly(vinylcyclopropane)s

Several new structures of fluorinated polymers poly(1)-poly(9) were prepared by free radical ring opening polymerization of vinylcyclopropane monomers 1-9 containing different fluorinated side groups of the type (CH₂)_n(CF₂)_pF. While in poly(1)-poly(3) p varied from 6 to 10 for a fixed n=2, in poly(4)-poly(6) n increased from 3 to 5 at the given p=8. In poly(7) and poly(8) a phenyl ring was incorporated to elongate the mesogenic side group (n=2; p=6 and 8, respectively), that was further separated from the polymer backbone by a methylene spacer (m=11) in poly(9). Therefore, the effects of various chemical variations of the polymer structure on the mesophase behavior could be assessed. The polymers were in fact co-polymers comprising both 1,5-linear and cyclobutane-ring isomer units. In any case they formed smectic mesophase(s) owing to the special character of the perfluorinated chains. The order and the isotropization temperature (T_i) of the mesophase were enhanced by increasing p, but T_i lowered with increasing n. Extension of the side group by insertion of a phenyl ring improved T_i. Wide angle X-ray diffraction studies clarified the nature of the different smectic phases, the occurrence of which was discussed in terms of the ability of the fluorinated side groups to pack antiparallel in either a partly or fully interdigitated structure. Co-polymers of 3 with a non-mesogenic, not fluorinated co-monomer 10 were also prepared with different chemical compositions. Co-polymerization was found to be another effective means of modifying the mesophase behavior of the poly(vinylcyclopropane)s.     

Thermal and crystallization characteristics of poly(trimethylene terephthalate)/poly(ethylene naphthalate) blends

Poly(trimethylene terephthalate) (PTT)/poly(ethylene naphthalate) (PEN) blends were miscible in the amorphous state in all of the blend compositions studied, as evidenced by a single, composition-dependent glass transition temperature (T_g) observed for each blend composition. The variation in the T_g value with the blend composition was well predicted by the Gordon-Taylor equation, with the fitting parameter being 0.57. The cold-crystallization peak temperature decreased with increasing PTT content, while the melt-crystallization peak temperature decreased with increasing amount of the minor component. The subsequent melting behavior after both cold- and melt-crystallization exhibited melting point depression, in which the observed melting temperatures decreased with increasing amount of the minor component. During melt-crystallization, both components in the blends crystallized concurrently just to form their own crystals. The blend with 60% w/w of PTT exhibited the lowest total apparent degree of crystallinity.     

Morphology and crystallization behavior of poly(l‐lactide)/poly(butylene oxalate) blends

The isothermal crystallization of poly(l ‐lactide) (PLLA) in blends with poly(butylene oxalate) (PBOX) is investigated by time‐resolved small‐angle X‐ray scattering, differential scanning calorimetry, and optical microscopy. We focus on the temperatures at which only PLLA crystallizes while PBOX is amorphous. It is obtained that the addition of PBOX causes a reduction of the melting temperature of PLLA. The lamellar thickness of PLLA crystals decreases whereas the amorphous layer thickness increases with blend composition, suggesting the occurrence of the interlamellar incorporation upon the addition of PBOX. The crystal growth rate and morphology of PLLA/PBOX blends are analyzed by polarized optical microscopy. The spherulite growth rate of PLLA is found to increase with the addition of PBOX. Analysis of the isothermal crystallization in terms of the Lauritzen and Hoffman equation give the reduction of the fold surface free energy upon the addition of PBOX in PLLA, indicating that the mobility of the PLLA chains is significantly improved due to the presence of PBOX. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 192–202     

Non-isothermal crystallization of poly(L-lactide) (PLLA) under quiescent and steady shear conditions

<正>The non-isothermal crystallization of poly(L-lactide)(PLLA) under quiescent and steady shear flow conditions was in situ investigated by using polarizing optical microscopy(POM) with a hot shear stage and wide-angle X-ray diffraction(WAXD).The shear rate and the cooling rate both play a significant role in the final crystalline morphology and crystallinity.Under quiescent conditions,the morphology assumes different sized spherulites,and its crystallinity dramatically reduces with increasing the cooling rate.On the other hand,the shear flow increases the onset crystallization temperature,and enhances the final crystallinity.When the shear rate is above 5 s~(-1),cylindrite-like crystals are observed, furthermore,their content depends on the cooling rate.     

Synthesis and mesomorphic properties of iron(II)-containing dendrimeric complexes derivative of 3,4-n-dodecyloxybenzoyl poly(propylene imine)

Synthesis and characterisation of liquid crystalline (LC) Fe(II) complexes with ‘two-chain’-substituted poly(propylene imine) (PPI) dendrimeric ligand of the first to fifth generations are presented. Compounds were synthesised by complex formation between the metal salt and the corresponding dendrimeric ligands. The purity and structure were proved by different methods. The calculated amount of iron in the complexes was confirmed by the experimental data with a great degree of precision. Iron ions are incorporated into the dendrimer at two sites: at the border and inside of the dendrimeric core. A tetragonal coordination of iron was found. Mesomorphic properties of dendrimer iron(II) complexes were studied, a hexagonal columnar mesophase (Col_h) was evaluated by the results of X-ray scattering. Upon excitation at absorption bands, iron dendrimeric complexes exhibit fluorescence properties.     

Melting behavior,crystallization kinetics,and crystal structure of poly(2‐hydroxyethoxybenzoate)

The melting behavior and crystallization kinetics of poly(2‐hydroxyethoxybenzoate) (PHEBA) were investigated with differential scanning calorimetry and hot‐stage optical microscopy. The observed multiple endotherms, commonly displayed by polyesters, were influenced by the crystallization temperature. By the application of the Hoffman–Weeks method to the melting temperatures of isothermally crystallized samples, a value of 232 °C was obtained for the equilibrium melting temperature. Isothermal crystallization kinetics were analyzed according to Avrami's treatment. Values of Avrami's exponent n close to 3 were obtained, independently of the crystallization temperature, in agreement with a crystallization process originating from predetermined nuclei and characterized by three‐dimensional spherulitic growth. In fact, space‐filling banded spherulites were observed by hot‐stage optical microscopy at all crystallization temperatures explored, with the band spacing increasing with increasing crystallization temperature. The rate of crystallization became lower as the crystallization temperature increased as usual at low undercooling, with the crystallization process controlled by nucleation. The equilibrium heat of fusion was determined by differential scanning calorimetry and wide‐angle X‐ray scattering measurements. Finally, the crystal phase of PHEBA was investigated with wide‐angle X‐ray scattering, and a triclinic unit cell was hypothesized. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1354–1362, 2002     

Effect of small amount of poly(ethylene naphthalate) on isothermal crystallization and spherulitic morphology of poly(trimethylene terephthalate)

The effect of a small amount of poly(ethylene naphthalate) (PEN) in its blends with poly(trimethylene terephthalate) (PTT) on isothermal melt-crystallization kinetics and spherulitic morphology of the blends was thoroughly investigated. The maximum PEN content in the blends was 9 wt%. Due to the single composition-dependent glass transition temperature (T_g) that was observed for each blend, these blends appeared to be miscible in the amorphous state. After isothermal crystallization from the melt state, the neat PTT and its blends with PEN exhibited either double or triple melting endotherms. The triple endothermic peaks were observed in both the neat PTT and the blends when being crystallized at crystallization temperatures (T_c) of less than or equal to 195 °C. The equilibrium melting temperature () for the neat PTT was determined based on the linear Hoffman–Weeks extrapolative method to be 248 °C. Such values for the blends were found to decrease with the addition and increasing amount of PEN. Both the neat PTT and the blends were isothermally crystallized over the T_c range of 190–205 °C. At a given T_c, the 97PTT/3PEN blend exhibited a half-time of crystallization (t_0.5) value that was lower, while it exhibited reciprocal half-time (), Avrami rate constant (K_A), and spherulitic growth rate (G) values that were greater, than those of the neat PTT. With further increase in the PEN content, the t_0.5 value increased, while the , K_A, and G values decreased. Analysis of the G values based on the Lauritzen–Hoffman's (LH) secondary nucleation theory showed that the neat PTT and the 91PTT/9PEN blend exhibited a regime II→III transition at 194 °C (467.2 K), while no regime transition was observed for the other two blends. The lateral and the fold surface free energies (σ and σ_e) and the work of chain folding (q) for the neat PTT and the blends were 19.4, 30.2–46.3 erg cm⁻², and 2.4–3.6 kcal mol⁻¹, respectively. Lastly, the effect of both the T_c and the PEN content on morphology and texture of the PTT spherulites was also investigated and the results showed that the texture of the spherulites became coarser with increasing T_c and PEN content.     

Effect of crystallization temperature on the crystalline phase content and morphology of poly(vinylidene fluoride)

The effect of temperature on the crystallization of α, β, and γ phases of PVDF from dimethylacetamide (DMA) solution was studied. Variation in the crystallinity content of these three phases was obtained as a function of temperature using infrared spectroscopy, differential scanning calorimetry (DSC) and x-ray diffraction techniques. Such variation is related to the dependence of the crystallization rate of each phase with temperature, and allowed a better understanding of some results found in the literature about the crystallization and interconversion of these phases. Micrographs of samples present morphologies that corroborate with the proposed explanations. © 1994 John Wiley & Sons, Inc.     

Electron beam irradiation effects on poly(ethylene terephthalate)

Changes in poly(ethylene terephthalate) subjected to electron beam irradiation at doses up to 15 MGy and dose rate of 1.65 MGy/h, were investigated by differential scanning calorimetry, molecular weight measurement, X-ray photoelectron spectroscopy, and scanning electron microscopy. Irradiated samples showed a decrease of molecular weight with a minimum at 5 MGy, which is attributed to chain scission of the macromolecules and then an increase at further doses due to branching and some degradation effect. Irradiation in air is not an important factor because the high dose rate of irradiation inhibits oxygen diffusion in the samples.     

Sulfur-substitution-enhanced crystallization and crystal structure of poly(trimethylene monothiocarbonate)

In this paper, the crystallization behavior of a novel poly(monothiocarbonate), poly(trimethylene monothiocarbonate) (PTMMTC), was investigated and compared with its polycarbonate analogue, poly(trimethylene carbonate) (PTMC). It is found that PTMMTC exhibits strong crystallizability, while unstretched PTMC is amorphous. DSC and DMA results reveal that PTMMTC possesses higher glass transition temperature (T_g) and β-transition temperature (T_β) than PTMC. Simulation based on density functional theory (DFT) shows that, the bond angle of C-S-C is evidently smaller than that of C-O-C, and thus a larger dipole moment. This leads to the stronger intermolecular interaction and more rigid chain conformation in PTMMTC, which is the origin of sulfur-substitution enhanced crystallization. The crystal structure of PTMMTC was preliminarily determined for the first time. PTMMTC has an orthorhombic crystal structure with a planar zig-zag chain conformation. The parameters of unit cell are a = 10.74 Å, b = 4.79 Å, and c (fiber axis) = 7.74 Å.     

Crystalline Morphology and Crystallization Kinetics of Melt-miscible Crystalline/Crystalline Polymer Blends of Poly（vinylidene fluoride） and Poly（butylene succinate-co-24mol% hexamethylene succinate）

Poly（vinylidene fluoride） （PVDF） and poly（butylene succinate-co-24 mol% hexamethylene succinate） （PBHS）, both crystalline polymers, formed melt-miscible crystalline/crystalline polymer blends. Both the characteristic diffraction peaks and nonisothermal melt crystallization peak of each component were found in the blends, indicating that PVDF and PBHS crystallized separately. The crystalline morphology and crystallization kinetics of each component were studied under different crystallization conditions for the PVDF/PBHS blends. Both the spherulitic growth rates and overall isothermal melt crystallization rates of blended PVDF decreased with increasing the PBHS composition and were lower than those of neat PVDF, when the crystallization temperature was above the melting point of PBHS component. The crystallization mechanism of neat and blended PVDF remained unchanged, despite changes of blend composition and crystallization temperature. The crystallization kinetics and crystalline morphology of neat and blended PBHS were further studied, when the crystallization temperature was below the melting point of PBHS component. Relative to neat PBHS, the overall crystallization rates of the blended PBHS first increased and then decreased with increasing the PVDF content in the blends, indicating that the preexisting PVDF crystals may show different effects on the nucleation and crystal growth of PBHS component in the crystalline/crystalline polymer blends.     

Composition and self-irradiation effects on the positron annihilation lifetime properties of poly(ethylene-co-vinyl acetate)

The behavior of the copolymer poly(ethylene-co-vinyl acetate), with different amounts of vinyl acetate (VA) (2, 4.5, 9 and 19 w/w%, respectively), has been studied by performing positron lifetime measurements as a function of temperature. An overall reduction of the ortho-positronium formation probability I₃ with increasing VA content is observed. The copolymers with 2, 4.5 and 9 w/w% VA show a V-shaped I₃ evolution with temperature, caused by positron irradiation induced ionization, whereas the copolymer with 19 w/w% VA has become practically inert to self-irradiation effects.     

Immobilization of ruthenium(II) salen complexes on poly(4-vinylpyridine) and their application in catalytic aldehyde olefination

Two Ru(II)(salen)(PPh₃)₂ complexes grafted on poly(4-vinylpyridine) have been synthesized and characterized. An elemental analysis shows that both grafted samples contain ca. 0.6 wt % Ru. FTIR spectra confirm the formation of metal-salen complexes attached to the carrier polymer by an interaction between the ruthenium(II) compounds with the pyridine nitrogen atoms of the poly(4-vinylpyridine). Immobilization of both Ru(II) salen complexes on the polymer increases their thermal stability as demonstrated by TG-MS analysis. The grafted materials were applied as catalysts for the olefination of various aldehydes at 60 °C under an inert gas atmosphere, showing comparable yields as their homogeneous congeners and high trans-selectivities. The ruthenium(II) compound with a larger salen ligand shows a better recyclability and selectivity than the derivative with the smaller ligand.     

Effects of multi-arm structure on crystallization and biodegradation of star-shaped poly(epsilon-caprolactone)

Star-shaped PCL with one to five arms were synthesized by ROP. They have the same crystal structure as linear PCL, indicating that the central cores are located in amorphous regions. The influence of arm length and number on crystallization and melting behavior were studied by DSC, POM, and through the Avrami equation. A model is proposed to analyze the enzymatic degradation process of star-shaped polymers. The multi-arm structure and the limitation of the central cores on the chain mobility of each arm are considered to be the primary factors influencing the characteristic crystallization and enzymatic degradation behavior of star-shaped PCLs.     

The role of hydrogen-bonding interaction in poly(vinyl alcohol)/poly(acrylic acid) blending solutions and their films

<正>The aim of this work is to investigate the hydrogen-bonding interaction in poly(vinyl alcohol)(PVA)/poly(acrylic acid)(PAA) blending system and its influence on rheological properties in solution and the physical properties in solid state. Introducing PAA into PVA solutions resulted in a thickening behavior of blend solutions.The viscosity of the solutions increased with PAA content increasing,and a maximum viscosity could be obtained when the ratio of PVA/PAA was 70/30. The intermolecular hydrogen-bonding and miscibility between PVA and PAA in solid state were investigated by differential scanning calorimetry(DSC),Fourier transform infrared spectroscopy(FTIR) and mechanical measurements.The results displayed the great influence of introducing PAA on the properties of blending films.The tensile strength increased from 89.31 MPa to 119.8 MPa and Young's modulus improved by over 300%with increasing PAA concentration compared with those of pure PVA films.By systematically studying the rheological behaviors of solutions and the physical properties of films,the influence of hydrogen-bonding in solutions and solid states were discussed.     

Crystal structure of poly(dithiotriethylene adipate)

The crystal structure of poly(dithiotriethylene adipate) has been determined through the best fitting of calculated and experimental X‐ray diffraction powder profiles. A triclinic cell was found with dimensions a = 4.942 (7) Å, b = 4.702 (2) Å, c = 20.56 (2) Å, α = 88.9 (2)°, β = 61.0 (1)°, γ = 67.8 (1)°, P‐1 space group, and one chain in the unit cell. A full extended trans conformation of the chain fitted satisfactory the experimental data, yielding to a discrepancy factor R_p = 0.073. A comparison between the crystal structures of poly(dithiotriethylene adipate) and poly (thiodiethylene adipate) is proposed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2677–2682, 2005