Bioelectrochemical Characterization of Horseradish and Soybean Peroxidases

Heme peroxidase are ubiquitous enzymes catalyzing the oxidation of a broad range of substrates by hydrogen peroxide. In this paper the bioelectrochemical characterization of horseradish peroxidase (HRP) and soybean peroxidase (SBP), belonging to class III of the plant peroxidase superfamily, was studied. The homogeneous reactions between peroxidases and some common redox mediators in the presence of hydrogen peroxide have been carried out by cyclic voltammetry. The electrochemical characterization of the reactions involving enzyme, substrate and mediators concentrations allowed us to calculate the kinetic parameters for the substrate–enzyme reaction (K_MS) and for the redox mediator–enzyme reaction (K_MM). A full characterization of the direct electron transfer kinetic parameters between the electrode and enzyme active site was also performed by opportunely modeling data obtained from cyclic voltammetry and square wave voltammetry experiments. The experimental data obtained with immobilized peroxidases show enhanced direct electron transfer and excellent electrocatalytical performance for H₂O₂. Despite the structural similarities and common catalytic cycle, HRP and SBP exhibit differences in their substrate affinity and catalytic efficiency. Basing on our results, it can be concluded that peroxidase from soybean represents an interesting alternative to the classical and largely employed one obtained from horseradish as biorecognition element of electrochemical mediated biosensors.     

Biosensors based on direct electron transfer in redox proteins

In biosensors based on direct electron transfer in redox proteins, efficient electron-transfer pathways between the immobilized redox protein and the electrode surface have to be established so to allow a fast electron transfer and concomitantly avoiding free-diffusing redox species. In this review, prerequisites for the direct electron transfer of redox proteins and immobilization of redox proteins on the electrode surfaces are addressed. Based on the specific nature of different proteins and non-manual immobilization procedures, possible biosensor designs are discussed, namely biosensors based on (1) ferritin; (2) cytochrome c; (3) myoglobin; (4) hemoglobin; (5) horseradish peroxidase; (6) catalase; (7) glucose oxidase; and (8) xanthine oxidase.     

Enzyme Electrodes Using Bioelectrocatalytic Reduction of Hydrogen Peroxide

Abstract

Amperometric electrodes have been constructed using the direct electron transfer between electrode and peroxidase for mediatorless hydrogen peroxide detection at a potential of ?0.010 V. For this purpose peroxidase was either adsorbed on pyrographite or immobilized in electrochemically synthesized polypyrrole layers on pyrographite or platinum electrodes.     

Mesoporous Materials Promoting Direct Electrochemistry and Electrocatalysis of Horseradish Peroxidase

The direct electron transfer and electrocatalysis of horseradish peroxidase (HRP) immobilized on hexagonal mesoporous silicas (HMS) matrix was studied. The interaction between HRP and HMS was examined by using Fourier transform infrared spectroscopy, nitrogen adsorption isotherms and electrochemical methods. The immobilized HRP at a modified glassy carbon electrode showed a good direct electrochemical behavior, which depended on the specific properties of the HMS. Two couples of redox peaks corresponding to Fe(III) to Fe(II) conversion of the HRP intercalated in the mesopores and adsorbed on the external surface of the HMS were observed with the formal potentials of ?0.315 and ?0.161 V in 0.1 M pH 7.0 PBS, respectively. The amount of HRP intercalated in the mesopores of HMS proved to be related to the pore size. The HRP intercalated in the mesopores showed a surface controlled electrode process with a single proton transfer. The immobilized HRP displayed an excellent electrocatalytic response to the reduction of hydrogen peroxide (H₂O₂) without the aid of an electron mediator. The HMS provided a novel matrix for protein immobilization and direct electron transfer study of the immobilized protein.     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

Breaking the barrier to fast electron transfer

A study of the electron transfer for a non-glycosylated redox variant of GOx is reported, immobilised onto an electrode via a polyhistidine tag. The non-glycosylated variant allows the enzyme to be brought closer to the electrode, and within charge transfer distances predicted by Marcus' theory. The enzyme-electrode-hybrid shows direct very fast reversible electrochemical electron transfer, with a rate constant of ~ 350 s^− 1 under anaerobic conditions. This is 2 orders of magnitude faster than the enzyme-free flavin adenine dinucleotide (FAD). These results are discussed in the context of the conformation of FAD in the active site of GOx. Further data, presented in the presence of oxygen, show a reduced electron transfer rate (~ 160 s^− 1) that may be associated with the oxygen interaction with the histidines in the active site. These residues are implicated in the proton transfer mechanism and thus suggest that the presence of oxygen may have a profound effect in attenuating the direct electron transfer rate and thus moderating ‘short-circuit’ incidental electron transfer between proteins.     

Electrochemical Studies of Intramolecular Electron Transfer in Laccase from Trametes versicolor

This paper describes electrochemical behavior of laccase from the fungus Trametes versicolor. The issues related to discrimination of the redox potentials corresponding to copper centers T1 and T2/T3 in the active site and possible mechanism of intramolecular electron transfer have been discussed. The electron‐transfer rate constant for laccase immobilized on carbon electrode is 3.4 s^?1. The bioelectrocatalytic activity of the enzyme was studied in the presence of 1,4‐hydroquinone (HQ). The kinetics of HQ oxidation is very fast (K_M=3.8 μM). However, the catalytic activity of laccase in the presence of high concentration of HQ decreases drastically. It is suggested that the T2/T3 copper center is able to accept electrons from HQ molecules directly via intramolecular channel.     

Electrocatalysis via Direct Electrochemistry of Myoglobin Immobilized on Colloidal Gold Nanoparticles

The direct electron transfer between immobilized myoglobin (Mb) and colloidal gold modified carbon paste electrode was studied. The Mb immobilized on the colloidal gold nanoparticles displayed a pair of redox peaks in 0.1 M pH 7.0 PBS with a formal potential of –(0.108 ± 0.002) V (vs. NHE). The response showed a surface‐controlled electrode process with an electron transfer rate constant of (26.7 ± 3.7) s ^?1 at scan rates from 10 to 100 mV s^?1 and a diffusion‐controlled process involving the diffusion of proton at scan rates more than 100 mV s^?1. The immobilized Mb maintained its activity and could electrocatalyze the reduction of both hydrogen peroxide and nitrite. Thus, the novel renewable reagentless sensors for hydrogen peroxide and nitrite were developed, respectively. The activity of Mb with respect to the pseudo peroxidase with a K_M^app value of 0.65 mM could respond linearly to hydrogen peroxide concentration from 4.6 to 28 μM. The sensor exhibited a fast amperometric response to NO₂^? reduction and reached 93% of steady‐state current within 5 s. The linear range for NO₂^? determination was from 8.0 to 112 μM with a detection limit of 0.7 μM at 3σ.     

Surface‐Tuned Electron Transfer and Electrocatalysis of Hexameric Tyrosine‐Coordinated Heme Protein

Molecular modeling, electrochemical methods, and quartz crystal microbalance were used to characterize immobilized hexameric tyrosine‐coordinated heme protein (HTHP) on bare carbon or on gold electrodes modified with positively and negatively charged self‐assembled monolayers (SAMs), respectively. HTHP binds to the positively charged surface but no direct electron transfer (DET) is found due to the long distance of the active sites from the electrode surfaces. At carboxyl‐terminated surfaces, the neutrally charged bottom of HTHP can bind to the SAM. For this “disc” orientation all six hemes are close to the electrode and their direct electron transfer should be efficient. HTHP on all negatively charged SAMs showed a quasi‐reversible redox behavior with rate constant k_s values between 0.93 and 2.86 s^?1 and apparent formal potentials ${E{{0{^{\prime }}\hfill \atop {\rm app}\hfill}}}$ between ‐131.1 and ‐249.1 mV. On the MUA/MU‐modified electrode, the maximum surface concentration corresponds to a complete monolayer of the hexameric HTHP in the disc orientation. HTHP electrostatically immobilized on negatively charged SAMs shows electrocatalysis of peroxide reduction and enzymatic oxidation of NADH.     

Bioelectrocatalysis by Microperoxidase‐11 in a Multilayer Architecture of Chitosan Embedded Gold Nanoparticles

We report on the redox behaviour of the microperoxidase‐11 (MP‐11) which has been electrostatically immobilized in a matrix of chitosan‐embedded gold nanoparticles on the surface of a glassy carbon electrode. MP‐11 contains a covalently bound heme c as the redox active group that exchanges electrons with the electrode via the gold nanoparticles. Electroactive surface concentration of MP‐11 at high scan rate is between 350±50 pmol cm^?2, which reflects a multilayer process. The formal potential (E°′) of MP‐11 in the gold nanoparticles‐chitosan film was estimated to be ?(267.7±2.9) mV at pH 7.0. The heterogeneous electron transfer rate constant (k_s) starts at 1.21 s^?1 and levels off at 6.45 s^?1 in the scan rate range from 0.1 to 2.0 V s^?1. Oxidation and reduction of MP‐11 by hydrogen peroxide and superoxide, respectively have been coupled to the direct electron transfer of MP‐11.     

An electrochemically preanodized screen-printed carbon electrode for achieving direct electron transfer to glucose oxidase

Here we report the unique property of a preanodized screen-printed carbon electrode (SPCE1) that can allow direct electron transfer (DET) reaction of glucose oxidase (GOx). The GOx can be immobilized in the composite of oxygen functionalities and edge plane sites generated during preanodization without additional cross-linking agents. The electron transfer rate of GOx is greatly enhanced to 4.38 s⁻¹ as a result of the conformational change of GOx in the microenvironment enabling the accessibility of active site for GOx to the electrode. The analytical versatility is further improved with the aid of Nafion film. As a consequence, the as-prepared electrode can be used as a glucose biosensor and the number of potential foreign species is then restricted by molecular size, permeation and/or (bio)chemical reaction. Most importantly, the disposable nature of the proposed electrode is expected to promote the DET-related researches.     

Direct Electrochemistry of Heme Proteins on Electrodes Modified with Didodecyldimethyl Ammonium Bromide and Carbon Black

A novel matrix based on commercially available carbon black (CB) N220 and didodecyldimethyl ammonium bromide (DDAB) was shown to be a reliable support for direct electron transfer reactions between screen printed electrode (SPE) and Fe(III)‐heme proteins. Cytochrome c (cyt c), myoglobin (Mb), horseradish peroxidase (HRP) and cytochromes P450 (CYP 51A1, CYP 3A4, CYP 2B4) generated well‐shaped cyclic voltammograms on SPE/CB/DDAB electrodes (both in solution and in immobilized state). The attractive performance characteristics of CB modified electrodes are advantageous over single‐walled carbon nanotubes (SW CNT) based ones. The achieved direct electrochemistry of heme proteins on CB/DDAB‐modified electrodes provided successful elaboration of the immunosensor for cardiac Mb. The immunosensor showed applicability for diagnostics of myocardial infarction displaying significant difference in cardiac Mb content of human blood plasma samples taken from the corresponding patients.     

Electron-transfer mechanisms in amperometric biosensors

The function of amperometric biosensors is related to electron-transfer processes between the active site of an (immobilized) enzyme and an electrode surface which is poised to an appropriate working potential. Problems and specific features of architectures for amperometric biosensors using different electron-transfer pathways such as mediated electron transfer, electron-hopping in redox polymers, electron transfer using mediator-modified enzymes and carbon-paste electrodes, direct electron transfer by means of self-assembled monolayers or via conducting-polymer chains are discussed.     

Spectroscopic Observation of Calcium‐Induced Reorientation of Cellobiose Dehydrogenase Immobilized on Electrodes and its Effect on Electrocatalytic Activity

Cellobiose dehydrogenase catalyzes the oxidation of various carbohydrates and is considered as a possible anode catalyst in biofuel cells. It has been shown that the catalytic performance of this enzyme immobilized on electrodes can be increased by presence of calcium ions. To get insight into the Ca²⁺‐induced changes in the immobilized enzyme we employ surface‐enhanced vibrational (SERR and SEIRA) spectroscopy together with electrochemistry. Upon addition of Ca²⁺ ions electrochemical measurements show a shift of the catalytic turnover signal to more negative potentials while SERR measurements reveal an offset between the potential of heme reduction and catalytic current. Comparing SERR and SEIRA data we propose that binding of Ca²⁺ to the heme induces protein reorientation in a way that the electron transfer pathway of the catalytic FAD center to the electrode can bypass the heme cofactor, resulting in catalytic activity at more negative potentials.     

Direct Electrochemistry of Horseradish Peroxidase Immobilized in a Low Molecular Weight Gel

The ternary system of dodecylpyridinium bromide (DDPB)/acetone/H₂O with appropriate composition can form a gel spontaneously and the gel is stable in hydrophobic ionic liquid 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([Bmim]PF₆). Based on the gelation phenomenon we observed, the low molecular weight gelator (LMWG) was first tried to immobilize horseradish peroxidase (HRP) on glassy carbon electrode (GCE). The scanning electron microscope (SEM) images, the UV‐Vis spectra and the bioactivity measurement indicate that the gel is suitable for the immobilization of HRP. The direct electrochemistry of the HRP‐gel modified GCE (HRP‐gel/GCE) in [Bmim]PF₆ shows a pair of well‐defined and quasi‐reversible redox peaks with the heterogeneous electron transfer rate constant (k_s) being 14.4 s^?1, indicating that the direct electron transfer between HRP and GCE is fast. The HRP‐gel/GCE is stable and reproducible. Also the electrode exhibits good electrocatalytic effect on the reduction of trichloroacetic acid (TCA), showing good promise in bioelectrocatalysis.     

Achieving Direct Electrical Connection to Glucose Oxidase Using Aligned Single Walled Carbon Nanotube Arrays

Direct electron transfer between an electrode and the redox active centre of glucose oxidase, flavin adenine dinucleotide (FAD), is probed using carbon nanotube modified gold electrodes. Gold electrodes are first modified with a self‐assembled monolayer of cysteamine and then shortened single walled carbon nanotubes (SWNT) are aligned normal to the electrode surface by self‐assembly. The electrochemistry of these aligned nanotube electrode arrays is initially investigated using potassium ferricyanide which showed SWNT act as nanoelectrodes with the ends of the tubes more electrochemically active than the walls. Subsequently the nanotubes are plugged into the enzymes in one of two ways. In the first method, native glucose oxidase is covalently attached to the ends of the aligned tubes which allowed close approach to FAD and direct electron transfer to be observed with a rate constant of 0.3 s^?1. In the second strategy, FAD was attached to the ends of the tubes and the enzyme reconstituted around the surface immobilized FAD. This latter approach allowed more efficient electron transfer to the FAD with a rate constant of 9 s^?1.     

Enzyme-modified nanoparticles using biomimetically synthesized silica

The entrapment of enzymes within biomimetic silica nanoparticles offers unique and simple immobilization protocols that merge the stability of proteins confined in solid phases with the high loading and reduced diffusion limitations inherent to nano-sized structures. Herein, we report on the biomimetic silica entrapment of chemically derivatized horseradish peroxidase for amperometric sensing applications. Scanning electron microscopy shows evidence of the formation of enzyme-modified nanospheres using poly(ethylenimine) as a template for silicic acid condensation. When these nanospheres are directly deposited on graphite electrodes, chemically modified anionic peroxidase shows direct electron transfer at 0 mV vs Ag|AgCl. Microgravimetric measurements as well as SEM images demonstrate that negatively charged peroxidase is also entrapped when silica precipitates at gold electrodes are modified with a self-assembled monolayer of poly(ethylenimine). Electrostatic interactions may play a crucial role for efficient enzyme entrapment and silica condensation at the PEI template monolayer. The in-situ biomimetically synthesized peroxidase nanospheres are catalytically active, enabling direct bioelectrocatalysis at 0 mV vs Ag|AgCl with long-term stability.     

Electrochemical Characteristics of Glucose Oxidase Adsorbed at Carbon Nanotubes Modified Electrode with Ionic Liquid as Binder

Multiwall carbon nanotubes (CNTs)‐modified electrode has been prepared by using ionic liquid (IL) as the binder. The as‐prepared CNTs‐IL composite modified electrode has good biocompatibility and is a suitable matrix to immobilize biomolecules. Glucose oxidase (GOx), containing flavin adenine dinucleotide as active site, stably adsorbed on modified electrode surface has resulted in the direct electron transfer. The electron transfer rate of 9.08 s^?1 obtained is much higher than that of GOx adsorbed on the CNTs papers (1.7 s^?1), and the process is more reversible with small redox peak separation of 23 mV. This may be due to the synergetic promotion of CNTs and IL to electron transfer of the protein, especially the IL as the binder, showing better electrochemical properties than that of chitosan and Nafion. Furthermore, GOx adsorbed at the modified electrode exhibits good stability and keeps good electrocatalytic activity to glucose with broad linear range up to 20 mM. Besides, the simple preparation procedure and easy renewability make the system a basis to investigate the electron transfer kinetics and biocatalytic performance of GOx and provide a promising platform for the development of biosensors.     

Redox and Conformational Equilibria and Dynamics of Cytochrome c at High Electric Fields

Cytochrome c (Cyt‐c) adsorbed in the electrical double layer of the Ag electrode/electrolyte interface has been studied by stationary and time‐resolved surface‐enhanced resonance Raman spectroscopy to analyse the effect of strong electric fields on structure and reaction equilibria and dynamics of the protein. In the potential range between +0.1 and ?0.55 V (versus saturated calomel electrode), the adsorbed Cyt‐c forms a potential‐dependent reversible equilibrium between the native state B1 and a conformational state B2. The redox potentials of the bis‐histidine‐coordinated six‐coordinated low‐spin and five‐coordinated high‐spin substates of B2 were determined to be ?0.425 and ?0.385 V, respectively, whereas the additional six‐coordinated aquo‐histidine‐coordinated high‐spin substate was found to be redox‐inactive. The redox potential for the conformational state B1 was found to be the same as in solution in agreement with the structural identity of the adsorbed B1 and the native Cyt‐c. For all three redox‐active species, the formal heterogeneous electron transfer rate constants are small and of the same order of magnitude (3–13 s^?1), which implies that the rate‐limiting step is largely independent of the redox‐site structure. These findings, as well as the slow and potential‐dependent transitions between the various conformational (sub‐)states, can be rationalized in terms of an electric field‐induced increase of the activation energy for proton‐transfer steps linked to protein structural reorganisation. Further increasing the electric field strength by shifting the electrode potential above +0.1 V leads to irreversible structural changes that are attributed to an unfolding of the polypeptide chain.     

Electrochemical DNA Hybridization Assay: Enzyme‐Labeled Detection of Mutation in p53 Gene

This paper discusses a new electrochemical DNA hybridization sensing approach based on the detection of a linked enzyme label. In this method we employ enzyme that is attached to a tethered ssDNA oligomer on the surface and the target analyte is a complementary ssDNA oligomer that does not require any pre‐treatment. The advantage of using of enzyme label is in its amplification of the registration of the hybridization event due to the catalytic reaction facilitated in the process. One particular novelty is associated with the use of enzymes that directly communicate with the electrode surface thus allowing for minimizing the need of additional reagents in the assay. The electrochemical assay was demonstrated when using mixed self‐assembled monolayers from thiolated oligonucleotide and 6‐mercapto 1‐hexanol on gold surfaces. Horseradish peroxidase (HRP) is attached to the surface tethered oligonucleotide using streptavidin‐biotin chemistry, and the enzyme successfully established direct electron transfer (DET) with the electrode or mediated electron transfer (MET) using a mediator. Hybridization results in increasing the angle of contact between electrode and DNA and also the stiffness of the ds DNA, which results in displacing the enzyme away from the electrode surface, and thereby reducing the occurrence of direct electron transfer between the enzyme and the electrode. The cyclic voltammetry showed a clear distinction in response between the complete complementary sequence and the two‐base mismatch sequence. Ellipsometric measurements show that the thickness of the thiol modified oligonucleotide on gold surfaces changes before and after hybridization for the complementary sequence, where as a minimal change in thickness was observed for the noncomplementary sequence. The model target analyte in this study was TP53 gene where a specific mutation is a marker for a list of cancers. Mutations of the TP53 gene have been demonstrated in tumors of the colon, breast, lung, ovary, bladder, and many other organs. Analysis of p53 mutations may provide useful information for the diagnosis, prognosis and therapy of cancer.