静电纺氧化锰复合碳纳米纤维柔性膜的电化学性能

采用一步法静电纺丝技术制备了具有超亲水特性的氧化锰/碳纳米纤维(MnO_x/CNFs)复合柔性膜电极材料,并通过X射线衍射、扫描电子显微镜和透射电子显微镜等对复合材料进行了表征.电化学性能测试结果表明,复合材料的电容性能优于单一材料,醋酸锰质量分数为40%时制得的复合纳米纤维电极(MC-4)在1 A/g电流密度下,于2 mol/L KOH电解液中的比电容高达1112.5 F/g,10 A/g电流密度下循环3000次比容量保持在93.4%,具有很好的稳定性.MnO_x/CNFs复合材料电化学性能增强一方面是由于三维超亲水纤维膜结构有利于电解液的快速浸润渗透,从而极大缩短了传输到材料基质的有效路径;另一方面是由于碳和MnO_x的协同效应,包裹在MnO_x粒子周围的碳层避免了MnO_x在充放电过程中的体积膨胀效应,这2种叠加机制促进了电化学性能的提升.     

Asymmetric supercapacitors based on stabilized α-Ni(OH)2 and activated carbon

In this work, stabilized Al-substituted α-Ni(OH)₂ materials were successfully synthesized by a chemical coprecipitation method. The experimental results showed that the 7.5% Al-substituted α-Ni(OH)₂ materials exhibited high specific capacitance (2.08?×?10³ F/g) and excellent rate capability due to the high stability of Al-substituted α-Ni(OH)₂ structures in alkaline media, suggesting its potential application in electrode material for supercapacitors. To enhance energy density, an asymmetric type pseudo/electric double-layer capacitor was considered where α-Ni(OH)₂ materials and activated carbon act as the positive and negative electrodes, respectively. Values for the maximum specific capacitance of 127 F/g and specific energy of 42 W·h/kg were demonstrated for a cell voltage between 0.4 and 1.6 V. By using the α-Ni(OH)₂ electrode, the asymmetric supercapacitor exhibited high energy density and stable power characteristics. The hybrid supercapacitor also exhibited a good electrochemical stability with 82% of the initial capacitance over consecutive 1,000 cycle numbers.     

Graphene-based electrochemical supercapacitors

Graphenes prepared by three different methods have been investigated as electrode materials in electrochemical supercapacitors. The samples prepared by exfoliation of graphitic oxide and by the transformation of nanodiamond exhibit high specific capacitance in aq. H₂SO₄, the value reaching up to 117 F/g. By using an ionic liquid, the operating voltage has been extended to 3·5 V (instead of 1 V in the case of aq. H₂SO₄), the specific capacitance and energy density being 75 F/g and 31·9 Wh kg⁻¹ respectively. This value of the energy density is one of the highest values reported to date. The performance characteristics of the graphenes which are directly related to the quality, in terms of the number of layers and the surface area, are superior to that of single-walled and multi-walled carbon nanotubes.     

Three-dimensional bundle-like multiwalled carbon nanotubes composite for supercapacitor electrode application

Bundle-type mutil-walled carbon nanotubes (MWCNTs) composite electrode is the first investigation and publication for the supercapacitor application. According to the thermogravimetric analysis results, as-synthesized BCNTs are considered as the electrode materials for supercapacitors and electrochemical double-layer capacitor in this study. The Brunauer–Emmett–Teller specific surface area of as-prepared bundled carbon nanotubes (BCNTs) is 95.29 m²/g given to a type III isotherm and H3 hysteresis loops. Slow scanning rates promote and enhance to achieve high C_b because of the superior conductivity of CNT bundles and one side close-layered Ni/Mg/Mo alloy inside the BCNT-based electrode and facile electron diffusivity between electrolyte and electrode. The specific capacitance C_s (1,560 F/g) is nearly equal to the maximum specific capacitance, which the BCNT-based composite electrode can actually be able to charge or fill in. The maximum energy density value is 195 Wh/kg with corresponding power density values of 0.21 kW/kg. Furthermore, the active 3D BCNTs material fabricated electrode enhances to contact the electrolyte directly and decreases the ion diffusion limitation. Electrochemical impedance spectroscopy spectrum summarized as the low-frequency area controls by mass transfer limitation, and the high-frequency area dominates by charge transfer of kinetic control. After 2,000 consecutive cyclic voltammetry sacnings and galvanostatic charge-discharge cycles at a current density of 1.67 A/g performs, the specific capacitance retentions of 3D BCNTs electrodes achieved 128.2 and 77.3%, respectively. Three-dimensional BCNT composite electrodes exhibit good conductivity and low charge transfer resistance, which is beneficial to fast charge transfer between the BCNTs electrode materials and electrolytes.     

Synthesis and pH-sensitive micellization of doubly hydrophilic poly(acrylic acid)-b-poly(ethylene oxide)-b-poly(acrylic acid) triblock copolymer in aqueous solutions

A doubly hydrophilic triblock copolymer poly(acrylic acid)-b-poly(ethylene glycol)-b-poly(acrylic acid) (PAA-b-PEO-b-PAA) with M _w/M _n = 1.15 was synthesized by atom transfer radical polymerization of t-butyl acrylate (tBA), followed by acidolysis of the PtBA blocks. The pH-sensitive micellization of PAA-b-PEO-b-PAA in acidic solution was investigated by potentiometric titration, fluorescence spectrum, dynamic light scattering and zeta potential. The pK _a was 6.6 and 6.0 in deionized water and in 0.1 mol/L NaCl solution, respectively. The copolymer formed micelles composed of a weakly hydrophobic core of complexed PAA and PEO and a hydrophilic PEO shell in 1 mg/mL solution at pH < 5.5 due to hydrogen bonding. The critical micelle concentration was 0.168 mg/mL at pH 2.0. At pH < 4.5, steady and narrow distributed micelles were formed. Increasing pH to 5.0, unsteady and broad distributed micelles were observed. At pH > 5.5, the micelle was destroyed owing to the ionization of the PAA blocks.     

Reversible Protein Adsorption on PMOXA/PAA Based Coatings: Role of PAA

In this study we report design of stimuli-responsive coating based on poly(2-methyl-2-oxazoline-random-glycidyl methacrylate)(PMOXA-r-GMA) comb copolymer and poly(acrylic acid)-block-poly(glycidyl methacrylate)(PAA-b-PGMA) block copolymers and scrutinize its ability to control protein adsorption. Firstly, PMOXA/PAA based coatings were prepared by simply spin coating the mixture of PMOXA-r-GMA and PAA-b-PGMA copolymer solutions onto silicon substrates followed by annealing at 110 °C.Then coatings were rigorously characterized by X-ray photoelectron spectroscopy(XPS), the static water contact angle(WCA) test,ellipsometry and atomic force microscopy(AFM). After that, the relationship of switchable behavior of PMOXA/PAA based coatings with PAA content and chain length was investigated through the change of thickness and WCA upon pH and ionic strength(I) trigger,which indicated that the change in thickness and WCA was triggered when PAA contents were increased as well as by increasing chain length of PAA in PMOXA/PAA based coatings. Finally, real-time adsorption/desorption of lysozyme(Lyso) on PMOXA/PAA based coatings was monitored using quartz crystal microbalance with dissipation monitoring(QCM-D). The results showed that the Lyso adsorption amount was increased upon increasing chain length and contents of PAA in PMOXA/PAA based coatings. The adsorbed Lyso was then efficiently desorbed by changing pH and I of medium with the maximum desorption( 90% desorption percentage) observed for the suitable ratio of PMOXA and PAA while chain length of PAA was kept longer than that of PMOXA. Furthermore, the prepared coatings were found to repeatedly adsorb and desorb Lyso for four successive cycles of adsorption/desorption, which confirmed the stability of prepared coatings.     

N-doped honeycomb-like porous carbon towards high-performance supercapacitor

Biomass-derived porous carbon with developed pore structure is critical to achieving high performance electrode materials. In this work, we report a grape-based honeycomb-like porous carbon (GHPC) prepared by KOH activation and carbonization, followed by N-doping (NGHPC). The obtained NGHPC exhibits a unique honeycomb-like structure with hierarchically interconnected micro/mesopores, and high specific surface area of 1268 m²/g. As a supercapacitor electrode, the NGPHC electrode exhibits a remarkable specific capacitance of 275 F/g at 0.5 A/g in a three-electrode cell. Moreover, the NGHPC//NGHPC symmetric supercapacitor displays a high energy density of 12.6 Wh/kg, and excellent cycling stability of approximately 95.2% capacitance retention after 5000 cycles at 5 A/g. The excellent electrochemical performance of NGHPC is ascribed to its high specific surface area, honeycomb-like structure and high-content of pyrodinic-N (36.29%). It is believed that grape-based carbon materials show great potential as advanced electrode materials for supercapacitors.     

镍钴氢氧化物的制备及其电化学性能

采用化学共沉淀法成功制备了片状镍钴氢氧化物,并探究了不同镍钴物质的量比对样品形貌及电化学性能的影响。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱仪(XPS)及比表面积孔径分析仪(BET)对样品的结构、形貌进行了表征,并利用循环伏安法、恒电流充放电法等对其电化学性能进行了分析。结果表明,n(Ni)∶n(Co)=4∶1的样品直接用作电极材料时,具有最好的电化学性能:在0.5 A/g的电流密度下拥有1852 F/g的高比容量;电流密度增大20倍时,仍拥有1330 F/g的高比容量。以镍钴氢氧化物为正极,活性炭为负极组装的非对称式超级电容器在346 W/kg的功率密度下,能量密度达52 Wh/kg,在循环10000圈之后电容保持率为92%。优异的电化学性能表明,片状镍钴氢氧化物是很有应用潜力的电极材料之一。     

Facile preparation and enhanced capacitance of the polyaniline/sodium alginate nanofiber network for supercapacitors

A porous and mat-like polyaniline/sodium alginate (PANI/SA) composite with excellent electrochemical properties was polymerized in an aqueous solution with sodium sulfate as a template. Ultraviolet-visible spectra, X-ray diffraction pattern, and Fourier transform infrared spectra were employed to characterize the PANI/SA composite, indicating that the PANI/SA composite was successfully prepared. The PANI/SA nanofibers with uniform diameters from 50 to 100 nm can be observed on scanning electron microscopy. Cyclic voltammetry and galvanostatic charge/discharge tests were carried out to investigate the electrochemical properties. The PANI/SA nanostructure electrode exhibits an excellent specific capacitance as high as 2093 F g(-1), long cycle life, and fast reflect of oxidation/reduction on high current changes. The remarkable electrochemical characteristic is attributed to the nanostructured electrode materials, which generates a high electrode/electrolyte contact area and short path lengths for electronic transport and electrolyte ion. The approach is simple and can be easily extended to fabricate nanostructural composites for supercapacitor electrode materials.     

Enriching redox active sites by interconnected nanowalls-like nickel cobalt phospho-sulfide nanosheets for high performance supercapacitors

Although transition metal phospho-sulfides deliver outstanding electrochemical performance, complex preparation methods hindered their further development. Herein, we report a facile one-step electrodeposition approach to deposit interconnected nanowalls-like nickel cobalt phospho-sulfide (Ni-Co-P-S) nanosheets onto the surface of carbon cloth. The thin Ni-Co-P-S nanosheets with multi-components and synergetic effects delivered rich active sites, further enhancing reversible capacitance. Therefore, the as-prepared Ni-Co-P-S electrode materials exhibit excellent electrochemical performance in a three-electrode system, showcasing a high specific capacitance of 2744 F/g at 4 A/g. The full supercapacitors based on Ni-Co-P-S as positive electrode and active carbon as negative electrode showcase a high specific capacitance of 110.9 F/g at 1 A/g, impressive energy density of 39.4 Wh/kg at a power density of 797.5 W/kg in terms of excellent cycling stability (91.87% retention after 10,000 cycles). This simple electrode position strategy for synthesizing Ni-Co-P-S can be extended to prepare electrode materials for various sustainable electrochemical energy storage/conversion technologies.     

花瓣状Co-Al双金属硫化物/泡沫镍电极材料的制备及其超级电容性能的研究

采用低成本的两步水热法直接将Co-Al双金属硫化物生长在泡沫镍上,成功制备了CoAl₂S₄/Ni电极材料,利用X射线衍射(XRD)、扫描电镜(SEM)和电化学测试等手段对其结构、形貌和超级电容性能进行了表征。结果表明,CoAl₂S₄/Ni电极材料呈现花瓣状的三维多孔结构,且表面粗糙,这种结构有利于电解液和电极材料的充分接触,具有良好的导电性和比电容性能;当电流密度为1A/g时,电极的放电比容量高达2187.1 F/g, 循环100次后比电容的保持率为90.1%,相关研究为超级电容器电极材料的制备及性能研究提供思路。     

Structural Transitions in Triblock Copolymers Based on Poly(ethylene oxide) and Polyacrylamide under the Temperature Influence

Thermal transitions in the bulk structure of triblock copolymers (PAA-b-PEO-b-PAA) based on polyacrylamide and poly(ethylene oxide) with varying molecular weight (length) of PEO block comparing with the structures of individual polymers and polymer mixtures were investigated. A lot of effects, such as the melting temperature depression, decreasing of the crystallinity degree of PEO and also appearance of the microphase separation in amorphous regions of the polymer mixtures and the triblock copolymers were found. Such investigations pointed to a strong intramolecular interaction of the polymer blocks in the triblock copolymers that is confirmed by the results of IR spectroscopy. It was shown that PEO and PAA blocks formed the system of H-bonds with participant of trans-multimers of amide groups.     

KOH activated carbon derived from biomass-banana fibers as an efficient negative electrode in high performance asymmetric supercapacitor

Here we demonstrate the fabrication, electrochemical performance and application of an asymmetric supercapacitor(AS) device constructed with β–Ni(OH)_2/MWCNTs as positive electrode and KOH activated honeycomb-like porous carbon(K-PC) derived from banana fibers as negative electrode. Initially,the electrochemical performance of hydrothermally synthesized β–Ni(OH)_2/MWCNTs nanocomposite and K-PC was studied in a three-electrode system using 1 M KOH. These materials exhibited a specific capacitance(Cs) of 1327 F/g and 324 F/g respectively at a scan rate of 10 m V/s. Further, the AS device i.e.,β–Ni(OH)_2/MWCNTs//K-PC in 1 M KOH solution, demonstrated a Cs of 156 F/g at scan rate of 10 m V/s in a broad cell voltage of 0–2.2 V. The device demonstrated a good rate capability by maintaining a Cs of 59 F/g even at high current density(25 A/g). The device also offered high energy density of 63 Wh/kg with maximum power density of 5.2 kW/kg. The AS device exhibited excellent cycle life with 100% capacitance retention at 5000 th cycle at a high current density of 25 A/g. Two AS devices connected in series were employed for powering a pair of LEDs of different colors and also a mini fan.     

Fe3O4/N-rGO复合材料的制备及其电化学电容性能

通过简单的一步水热法成功制备了Fe_3O_4/氮掺杂还原石墨烯(Fe_3O_4/N-r GO)复合物电极材料。采用X-射线衍射、X-射线光电子能谱、扫描电镜和透射电镜等手段对其结构和形貌进行了表征,用循环伏安法、交流阻抗和恒电流充放电等方法研究了所制备材料的电化学性能。结果表明,Fe_3O_4/N-rGO具有更高的比电容和更好的循环稳定性,在0.5A/g的电流密度下,其比电容高达291.7F/g,远高于纯的Fe_3O_4和纯的NrGO的比电容。这是由于小粒径Fe_3O_4的加入大大降低了石墨烯的团聚,两者间的协同作用使复合物的比电容得到了提高。     

自支撑三维功能化石墨烯/聚苯胺电极材料的制备及超级电容性能

采用水热法制备了三维石墨烯(3D-G),并以十八胺(ODA)为接枝剂对部分还原的氧化石墨烯进行氨基化处理,再利用原位聚合法在氨基化石墨烯表面生长聚苯胺,制备了十八胺功能化石墨烯/聚苯胺(G-ODA/PANI).对材料进行了结构表征、电化学性能分析和材料结构的比电容贡献分析.结果显示,电极材料的电容贡献大部分体现为材料的表面电容,G-ODA/PANI电极片在1 A/g电流密度时的比电容最高可达1080 F/g,是未功能化石墨烯/聚苯胺电极材料(G/PANI)的2.57倍,且循环稳定性也有很大的提高,循环10000周后的比容量保持率为90.8%,比G/PANI高9.6%.     

Nitrogen-doped porous carbon coated on MnCo2O4 nanospheres as electrode materials for high-performance asymmetric supercapacitors

Spinel-based nanostructured materials are commonly used as promising electrode materials for supercapacitor applications. The combination of heteroatom-doped carbon material with spinel oxides substantially improves the specific capacitance and cyclic stability. In this work, dopamine-derived nitrogen-doped carbon was coated on spinel phase MnCo₂O₄ nanospheres using simple solvothermal and calcination methods. Surface morphology and the crystalline structure of the prepared MnCo₂O₄@Nitrogen-doped carbon were confirmed by FESEM and X-ray diffraction. The electrochemical performance of MnCo₂O₄@Nitrogen-doped carbon electrode material was analyzed by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy techniques. MnCo₂O₄@nitrogen-doped carbon exhibits the highest specific capacitance of 1200 F/g compared to MnCo₂O₄ spheres are 726 F/g at 1 A/g and exhibits excellent cyclic stability (capacitance retention of 87% at 7 A/g after 3000 cycles). The enhanced performance of the composite might be benefitted from the synergistic effect between nitrogen-doped carbon on porous MnCo₂O₄ spheres. Furthermore, an asymmetric supercapacitor device was fabricated by using the optimized composition of MnCo₂O₄@NC-2 as a positive electrode and nitrogen, sulfur-doped reduced graphene oxide (NS-rGO) as a negative electrode, respectively. This asymmetric supercapacitor device achieves a maximum energy density of 61.0 Wh/kg at a power density of 2889 W/kg and possesses excellent capacitance retention of 95% after 5000 cycles at 7 A/g.     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

石墨烯/聚吡咯纳米纤维超级电容器电极材料的制备及其电化学性能

超级电容器因其具有较高的循环稳定性和较好的能量密度而成为储能器件中的研究热点,其电极材料及制备方法是决定超级电容器电化学性能的关键因素。 本文以聚环氧乙烷-聚环氧丙烷-聚环氧乙烷三嵌段共聚物(P123)为软模板,通过一步原位聚合法成功地制备了石墨烯/聚吡咯纳米纤维(GR/PPy NF)复合超级电容器电极材料。 通过X射线衍射(XRD),X射线光电子能谱(XPS)、透射电子显微镜(TEM)和傅里叶变换红外光谱仪(FT-IR)等对复合材料的结构和形态进行了系统的表征。 利用电化学方法对GR/PPy NF复合电极材料的电化学性能进行了系统的分析。 结果表明,在电流密度0.5 A/g下,纳米复合材料的比电容量高达969.5 F/g,在充放电600圈之后,仍可保留初始比电容的88%,展示了良好的电容性能及循环稳定性。 GR/PPy NF制备简单,性能优异,是一种很有前途的能量转换/存储材料。     

Design and Preparation of Graphene/Fe2O3 Nanocomposite as Negative Material for Supercapacitor

The development of high specific capacitance electrode materials with high efficiency, scalability and economic feasibility is significant for the application of supercapacitors, however, the synthesis of electrode material still faces huge challenges. Herein, graphene(G)/Fe₂O₃ nanocomposite was prepared via a simple hydrothermal method connected with subsequent thermal reduction process. Scanning electron microscopy(SEM) and transmission electron microscopy(TEM) results showed rod-like Fe₂O₃ nanoparticles were prepared and well-dispersed on graphene layers, providing a rich active site and effectively buffering the aggregation of Fe₂O₃ nanoparticles in the process of electrochemical reaction. The specific capacitance of the obtained G/Fe₂O₃ nanocomposite as negative electrode for supercapacitor was 378.7 F/g at the current density of 1.5 A/g, and the specific capacitance retention was 88.76% after 3000 cycles. Furthermore, the asymmetric supercapacitor(ASC) was fabricated with G/Fe₂O₃ nanocomposite as negative electrode, graphene as positive electrode, which achieved a high energy density of 64.09 W∙h/kg at a power density of 800.01 W/kg, maintained 30.07 W∙h/kg at a power density of 8004.89 W/kg, and retained its initial capacitance by 78.04% after 3000 cycles. The excellent result offered a promising way for the G/Fe₂O₃ nanocomposite to be applied in high energy density storage systems.     

聚苯胺/介孔碳纳米线复合电极材料的制备和性能

以介孔碳纳米线为基体, 通过电化学方法制备了新型聚苯胺/介孔碳纳米线(PANI/MCFs)复合材料, 采用SEM和TEM等手段对样品的结构和形貌进行了表征. 结果表明, 聚苯胺均匀附在介孔碳纳米线表面, 并填充到纳米线介孔孔道中. 将复合材料组装成三电极体系超级电容器, 用循环伏安、 恒流充放电和交流阻抗等方法对材料的电化学性能进行了测试. 结果显示, 在1 mol/L H₂SO₄溶液中, 复合材料的比电容达到391 F/g, 其循环稳定性也得到显著提高.