水环境中胞内外抗生素抗性基因分析的DNA提取方法及污染现状研究进展

新型污染物抗生素抗性基因(Antibiotic resistance genes,ARGs)对公共健康产生了严重威胁,其在水环境中的长期存在和传播引起了广泛重视。胞内与胞外ARGs在水环境中的分布规律和环境行为差异明显,对其污染状况进行研究有助于全面了解水环境中ARGs的传播特性。该文总结了5种常见水样微生物DNA提取方法及其在胞内和胞外ARGs检测研究中的应用状况,比较了污水系统、淡水系统及海水系统等典型水环境中胞内和胞外ARGs的污染状况和迁移传播特性。为进一步探究水环境中ARGs的分布特征与传播机制提供了技术手段及污染现状等基础信息,对控制ARGs在水环境中的传播扩散具有重要意义。     

Trace analysis and occurrence of anhydroerythromycin and tylosin in influent and effluent wastewater by liquid chromatography combined with electrospray tandem mass spectrometry

Two wastewater treatment plants (WWTPs) of northern Colorado were monitored for anhydroerythromycin and tylosin. An analytical method has been developed and validated for the trace determination and confirmation of these compounds in the raw influent and final effluent water matrices. This method was used to evaluate the occurrence and fate of these compounds in WWTPs. The method uses solid-phase extraction and liquid chromatography–tandem mass spectrometry with positive electrospray ionization. Detection and quantification was performed using selected reaction monitoring, and a method detection limit of between 0.01 and 0.06 μg/L was obtained. Unequivocal confirmation analysis of analyte identity according to the criteria (based on the use of identification points) of the 2002/657/EC European Commission Decision was possible with satisfactory results. Average recoveries for the two compounds ranged from 89.2±9.7% for raw influent to 93.7±6.9% for effluent wastewaters. The within-run precision of the assay was found to be always less than 14.1% for the two analytes. The overall precision was always less than 13.7%. The relative uncertainty of the present assay was also evaluated and the combined relative uncertainty ranged from 6.4 to 15.5% over three days of the validation study. These compounds were partially removed in the WWTPs with a removal efficiency of >50%. The measured concentrations in raw influents and effluents ranged from 0.09–0.35 and 0.04–0.12 μg/L for anhydroerythromycin to 0.06–0.18 and ND–0.06 μg/L for tylosin, respectively. The results indicate that WWTP effluents are relevant point sources for residues of these compounds in the aquatic environment. These occurrence results were compared with those in WWTP wastewaters of other countries.     

UV-C Peroxymonosulfate Activation for Wastewater Regeneration: Simultaneous Inactivation of Pathogens and Degradation of Contaminants of Emerging Concern

This study explores the capability of Sulfate Radical-based Advanced Oxidation Processes (SR-AOPs) for the simultaneous disinfection and decontamination of urban wastewater. Sulfate and hydroxyl radicals in solution were generated activating peroxymonosulfate (PMS) under UV-C irradiation at pilot plant scale. The efficiency of the process was assessed toward the removal of three CECs (Trimethoprim (TMP), Sulfamethoxazole (SMX), and Diclofenac (DCF)) and three bacteria (Escherichia coli, Enterococcus spp., and Pseudomonas spp.) in actual urban wastewater (UWW), obtaining the optimal value of PMS at 0.5 mmol/L. Under such experimental conditions, bacterial concentration ≤ 10 CFU/100 mL was reached after 15 min of UV-C treatment (0.03 kJ/L of accumulative UV-C radiation) for natural occurring bacteria, no bacterial regrowth was observed after 24 and 48 h, and 80% removal of total CECs was achieved after 12 min (0.03 kJ/L), with a release of sulfate ions far from the limit established in wastewater discharge. Moreover, the inactivation of Ampicillin (AMP), Ciprofloxacin (CPX), and Trimethoprim (TMP) antibiotic-resistant bacteria (ARB) and reduction of target genes (ARGs) were successfully achieved. Finally, a harmful effect toward the receiving aquatic environment was not observed according to Aliivibrio fischeri toxicity tests, while a slightly toxic effect toward plant growth (phytotoxicity tests) was detected. As a conclusion, a cost analysis demonstrated that the process could be feasible and a promising alternative to successfully address wastewater reuse challenges.     

Occurrence,fate and removal efficiencies of pharmaceuticals in wastewater treatment plants (WWTPs) discharging in the coastal environment of Algiers

In the last few decades, the presence of pharmaceutical products in the environment is known under the name of emerging contaminants. These substances can enter the aquatic environment via different sources, as parent compounds, metabolites or a combination of both. In this work, we have investigated the presence of four pharmaceutical active compounds belonging to the group of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs), in wastewater, surface water and drinking water of Algiers, which have a direct impact on the Mediterranean Sea. The target analytes (ibuprofen (IBU), naproxen (NAP), ketoprofen (KET), and diclofenac (DIC)), were extracted from the water samples by using Solid Phase Extraction Oasis^® HLB Cartridges; the identification and quantification were realized by Gas Chromatography–Mass Spectrometry (GC–MS). To obtain the best resolution and precision, N-methyl-N-(trimethylsilyl) trifluoroacetamide (MSTFA) was used as the derivatization reagent and ibuprofen-d₃ was used as the internal standard. The obtained recoveries were good, ranging from 82% for ketoprofen to 120% for naproxen with relatively small standard deviations (≤20%). The target compounds were detected in wastewater, influent/effluent with concentrations ranging from 155.5 to 6554 ng/L, implicating removal efficiencies of wastewater treatment plants (WWTPs), between 30.3 and 95%. The surface water was also contaminated with pharmaceuticals from 72.9 ng/L for diclofenac to 228.3 ng/L for naproxen. In addition, the occurrence of ibuprofen and ketoprofen in drinking water, at concentrations of 142.1 and 110.9 ng/L, respectively, attracts concerns about possible impacts on human health.     

Tetracycline sensitizes TiO2 for visible light photocatalytic degradation via ligand-to-metal charge transfer

Treatment of antibiotics contaminated water remains a global environmental challenge. In this study, tetracycline (TC) was found to effectively sensitize pure TiO₂ for visible light photocatalytic degradation via a ligand-to-metal charge transfer mechanism. The sensitization was attributed to the formation of TC-TiO₂ complex and the overlap of the molecular orbitals of TC and the conduction band of TiO₂. The intermediate degradation products of TC, however, did not sensitize TiO₂, which was the reason for the low mineralization rate. Nevertheless, our results showed that the intermediate degradation products of TC had significantly reduced bactericidal effects and less induction of antibiotic-resistance genes (ARGs). This study showcases an effective treatment of antibiotics-containing wastewater using the most common photocatalyst TiO₂ with reduced risk in the spread of ARGs.     

Recent advance in microbial fuel cell reactor configuration and coupling technologies for removal of antibiotic pollutants

Microbial fuel cell (MFC) technology, as a biological treatment model that can convert antibiotic pollutants into electrical energy, has attracted extensive attention in recent years. Reactor configuration and coupling process play an important role in the treatment of antibiotic wastewater by the MFC, which will affect microbial activity, pollutant removal, and electricity generation. In this review, recent advances of reactor configuration (single chamber, double chamber, and cylinder) and coupling technology (wetland-MFC, sediment-MFC and membrane-MFC, and so on) of the MFC on treating of antibiotics are summarized, and their characteristics in the aspects of pollutant removal and power output are analyzed. Finally, through comparing removal quantity (mg antibiotics per day), the double chamber MFC as the individual treatment unit and the membrane-MFC exhibit better removal quantity.     

Dissimilarity of different cephalosporins on volatile fatty acids production and antibiotic resistance genes fates during sludge fermentation and underlying mechanisms

The distinct influences of cephalosporins (CEPs, i.e., cefamandole nafate and cefpirome sulfate) affiliated to different generations on the volatile fatty acids (VFAs) production and antibiotic resistance genes (ARGs) fates during waste activated sludge (WAS) fermentation were unveiled. The presence of CEPs mainly exhibited negative effects on the total VFAs production (5%–15% reduction), especially the cefamandole nafate, which is quite different to previous understanding. Further investigation revealed that the CEPs contributed to the solubilization and hydrolysis but inhibited the acidification process by affecting the functional microbial populations (i.e., Tissierella) and general microbial metabolic activities (i.e., pyruvate metabolism and VFAs biosynthesis). In addition, CEPs (especially the cefpirome sulfate) caused the propagation of ARGs (i.e., blaTEM, tetX and mexF) during WAS fermentation. CEPs enhanced the cell membrane permeability to promote the antibiotics mechanism of efflux pump and the horizontal transfer of ARGs. Also, the CEPs altered the regulatory systems (i.e., two component system) and microbial populations associated with ARGs, resulting in the proliferation of specific ARGs. Overall, the dissimilarity of different CEPs impacts on the WAS fermentation for VFAs production and ARGs variations enlightened the diverse environmental behaviors of anthropogenic pollutants and evoked the caution of ecological risks.     

Assessment of the acute toxicity of triclosan and methyl triclosan in wastewater based on the bioluminescence inhibition of Vibrio fischeri

In this work, the contributions of triclosan and its metabolite methyl triclosan to the overall acute toxicity of wastewater were studied using Vibrio fischeri. The protocol used in this paper involved various steps. First, the aquatic toxicities of triclosan and methyl triclosan were determined for standard substances, and the 50% effective concentrations (EC₅₀) were determined for these compounds. Second, the toxic responses to different mixtures of triclosan, methyl triclosan, and surfactants were studied in different water matrices, i.e., Milli-Q water, groundwater and wastewater, in order to evaluate (i) the antagonistic or synergistic effects, and (ii) the influence of the water matrices. Finally, chemical analysis was used in conjunction with the toxicity results in order to assess the aquatic toxicities of triclosan and its derivative in wastewaters. In this study, the toxicities of 45 real samples corresponding to the influents and effluents from eight wastewater treatment works (WWTW) were analyzed. Thirty-one samples were from a wastewater treatment plant (WWTP) equipped with two pilot-scale membrane bioreactors (MBR), and the influent and the effluent samples after various treatments were characterized via different chromatographic approaches, including solid-phase extraction (SPE), liquid chromatography coupled to tandem mass spectrometry (LC–MS/MS), and SPE coupled to gas chromatography–mass spectrometry (GC–MS). The toxicity was determined by measuring the bioluminescence inhibition of Vibrio fischeri. In order to complete the study and to extrapolate the results to different WWTPs, the toxicity to V. fischeri of samples from seven more plants was analyzed, as were their triclosan and methyl triclosan concentrations. Good agreement was established between the overall toxicity values and concentrations of the biocides, indicating that triclosan is one of the major toxic organic pollutants currently found in domestic wastewaters.     

Toxicity assays applied to wastewater treatment

The utility and validity of toxicity tests for monitoring of wastewater treatment have been assessed. The evaluated acute toxicity tests have been Vibrio fischeri, Selenastrum capricornotum and Daphnia magna tests. The validation studies indicated that the acute toxicity tests can be considered as high sensitivity analytical tools to detect common environmental concentrations of the pollutants at concentration levels as low as ng l⁻¹. The toxicity tests showed to have discriminatory ability to distinguish between different degrees of toxicity, and the toxic specificity of the compounds on target organisms. Synergistic, additive or antagonistic effects were evaluated indicating the capacity of the toxicity test to assess the combined effects of chemicals in wastewaters. The reproducibility of these tests, calculated as relative standard deviation, is acceptable in the range of 5-22.3%. The application of multivariate date analysis proved that toxicity and chemical measures are complementary analytical tools for monitoring of wastewaters quality. The toxicity tests are useful analytical tools for screening of chemical analysis and as an early warning system to monitor the treatment of WWTPs. The use of single toxicity test or battery of tests is the best approach to evaluate the risk because they are reliable indices of the toxic impact of effluents in the aquatic environment. The toxicity tests were applied in the quality control of different European WWTPs.     

Simultaneous extraction and analysis of 11 tetracycline and sulfonamide antibiotics in influent and effluent domestic wastewater by solid-phase extraction and liquid chromatography-electrospray ionization tandem mass spectrometry

Wastewater treatment plants (WWTPs) in which antibiotic compounds are not totally eliminated are considered to be point sources of antibiotic contamination in surface and ground waters. Therefore, there is a need for sensitive and reliable analytical methods for measuring these compounds in WWTP water matrices. This paper describes a simultaneous method for the determination of six tetracyclines (TCs) (oxytetracycline (OTC), tetracycline (TC), demeclocycline (DMC), chlortetracycline (CTC), doxycycline (DXC), meclocycline (MCC)) and five sulfonamides (SAs) (sulfathiazole (STZ), sulfamethazine (SMT), sulfachloropyridazine (SCP), sulfamethoxazole (SMX) and sulfadimethoxine (SDM)) using solid-phase extraction followed by liquid chromatography-ion trap tandem mass spectrometry. The average recovery of 11 antibiotics for simultaneous extraction was 83.3+/-12.6 and 89.8+/-11.5% for six TCs, and 95.2+/-11.4 and 97.7+/-10.6% for five SAs in the influent and effluent water, respectively. Matrix effects were found to be significant when measuring TCs but not SAs. The accuracy and day-to-day variation of the method fell within an acceptable range of 15% absolute. Method detection limits in wastewater matrices were between 0.03 and 0.07 microg/L. For the investigated 11 antibiotic compounds TC, DMC, CTC, DXC, SMT, SMX and SDM were found in the influents with a concentration range of 0.05-1.09 microg/L. CTC, DXC and SMX were also detected in the effluents with a concentration range of 0.06-0.21 microg/L. These results were compared with those in WWTP effluents of Canada, Germany and Switzerland.     

Evaluation of pharmaceutical activities of G-protein coupled receptor targeted pharmaceuticals in Chinese wastewater effluent

The occurrence of biologically active pharmaceuticals in aquatic environments raised the potential risks to aquatic species. Among these marketed biological active pharmaceuticals, it has been estimated that 40% of them target G-protein-coupled receptors (GPCRs). We have illustrated pharmaceutical activities of GPCR targeted pharmaceuticals in English and Japanese wastewater by the in vitro transforming growth factor-α (TGFα) shedding assay. However, as the most important producer and consumer of pharmaceuticals, the occurrence of GPCR targeted pharmaceuticals in China had remained unclear. In this study, we investigated the pharmaceutical activities of GPCR targeted pharmaceuticals in secondary effluents of Chinese wastewater treatment plants. We discovered antagonistic activities against angiotensin (AT1) receptor at up to 7.2 × 102 ng-valsartan-equivalent quantity/L in Chinese wastewater for the first time as well as agonistic activities against dopamine (D2) receptor. Furthermore, in parallel with the assay, we determined concentrations of GPCR targeted pharmaceuticals in target wastewater by liquid chromatography coupled with tandem mass spectrometry (LC–MS/MS). Through the comparison of predicted antagonistic activities calculated by concentrations and potency values from the assay, we found that the measured antagonistic activities against AT1 receptor from the assay were higher than the predicted AT1 activities from valsartan, irbesartan, and losartan, indicating the potential existence of other unknown AT1 antagonists in wastewater.     

Enzymatic pretreatment mitigates the dissemination of antibiotic resistance genes via regulating microbial populations and gene expressions during food waste fermentation

Food waste (FW) has been recognized as essential reservoir for resource recovery via anaerobic fermentation, which could also bring the potential risk of antibiotic resistance genes (ARGs) dissemination. Although the structural deficiency of FW could be stimulated by enzymatic pretreatment to enhance fermentation efficiency, the influences of enzymatic pretreatment on ARGs fate and microbial metabolic pathways involved in ARGs dissemination have rarely been reported. This work proved that enzymatic pretreatment could effectively decrease the total abundance of ARGs (reduced by 13.8%-24.5%) during long-term FW fermentation. It was found that enzymatic pretreatment significantly reduced the ARGs belonging to the efflux pump, which might be ascribed to its ability to increase membrane permeability. Furthermore, enzymatic pretreatment was in favor of reducing microbial diversity and various potential ARGs host (e.g., Methanosarcina, Clostridium, Prevotella, Parabacteroides). Also, this pretreatment remarkably up-regulated the genetic expressions involved in ABC transporter (e.g., eryF and mntA) and down-regulated the genetic expressions that participated in DNA replication, two-component systems (e.g., uphA and cckA), and quorum sensing (e.g., rpfF and lsrG), thereby decreasing ARGs transmission. This study would expand the insight of the influences of pretreatment method on ARGs fate during FW fermentation, and offer practical guidance on the sustainable management of FW.     

Simultaneous determination of sulfonamides, tetracyclines and tiamulin in swine wastewater by solid-phase extraction and liquid chromatography-mass spectrometry

Little is known about the contamination level of antibiotics in swine wastewater in China. The highly complex matrix of swine wastewater, which generally has a chemical oxygen demand (COD) concentration as high as 15,000 mg/L, makes it difficult to detect antibiotics at trace levels. In this work, a highly selective and sensitive analytical method was developed for simultaneous determination of three classes of commonly used veterinary antibiotics including five sulfonamides, three tetracyclines and one macrolide in swine wastewater using solid-phase extraction (SPE) and liquid chromatography-mass spectrometry (LC-MS). The method detection limits (MDL) in the swine wastewater were determined to be between 5 and 91 ng/L, depending on specific antibiotics. Except sulfamethizole, all the other eight antibiotics were detected in the swine wastewaters collected from three concentrated swine feeding plants located in the Beijing (China) area, showing a concentration range of 0.62-32.67 microg/L. These results reveal the representative concentration levels of selected antibiotics in the swine wastewaters of Beijing area.     

Determination of various estradiol mimicking-compounds in sewage sludge by the combination of microwave-assisted extraction and LC-MS/MS

In this work, we present the development and application of a microwave assisted extraction followed by liquid chromatography-tandem mass spectrometry methodology (MAE-LC-MS/MS) for the determination of various estradiol-mimicking compounds in sewage sludge samples. For the purification of the MAE extracts, we have employed a solid phase extraction (SPE) clean-up procedure, previously optimised. The entire method provides recoveries between 71.7% and 103.1%, with relative standard deviation lower than 11.1% and limits of detection ranging from 0.6 to 3.5 ng g⁻¹. The developed method was applied to samples from three wastewater treatment plants (WWTPs) located in Las Palmas of Gran Canaria (Spain), two of which had a conventional activated sludge treatment (AST), whereas the third treatment plant had an advanced membrane bioreactor treatment (MBR). All of the analytes in the study, including (nonylphenol (NP), octylphenol (OP), and some of their ethoxylated chains AP_nEOs (n ≤ 7), 17β-estradiol (E2), estriol (E3), 17α-ethynylestradiol (EE) and bisphenol-A (BPA)), were found in almost all samples in concentrations ranging from 0.9 to 710.2 ng g⁻¹.     

Determination of estrogenic steroids in surface water and wastewater by liquid chromatography-electrospray tandem mass spectrometry

An analytical method is presented which permits trace level determination of 17alpha-ethynylestradiol (EE2), 17beta-estradiol (E2), and estrone (E1). Using this method, the estrogenic steroids were analyzed in drinking water, surface water, and wastewater (sewage influents and effluents) at concentrations down to 0.1 ng/L. Sample volumes between 100 and 500 mL are concentrated using automated solid-phase extraction. Analysis is performed by liquid chromatography with detection by tandem mass spectrometry. Applying simple clean-up procedures and internal standard calibration, recovery losses resulting from matrix-dependent ion suppression during electrospray ionization could be compensated for all of the investigated compounds. Recoveries around 100% were obtained for all analytes after correction using the internal standards. Limits of quantification (LOQ) were between 0.1 and 0.4 ng/L for purified sewage, surface, ground, and drinking water and between 1 and 2 ng/L in the case of raw sewage. Water treatment by wastewater treatment plants (WWTPs) or by a surface water treatment plant affected the removal of all estrogenic steroids. Thus, E1, E2, and EE2 were removed in the municipal WWTPs to the extent of 93%, 93%, and 80%, respectively. In the effluents of the WWTP in Ruhleben (Berlin, Germany), E1, E2, and EE2 were detected at the low ng/L level. E2 and EE2 were, however, not present in the Berlin surface water above the LOQ (0.2 ng/L). E1 was the only compound that could be detected in surface water samples. After additional surface water treatment it was still detectable but only at trace-level concentrations with a mean value of 0.16 ng/L.     

Trace enrichment of metal ions in aquatic environments by Saccharomyces cerevisiae

Sorption properties of baker’s yeast cells, characterised as Saccharomyces cerevisiae were evaluated for trace enrichment of metal ions: Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Pb²⁺ and Zn²⁺ from aqueous environments. Metal concentration was determined by flame atomic absorption spectrometry (FAAS). Parameters affecting metal uptake such as solution pH, incubation time, amount of yeast biomass and effect of glucose concentration (energy source) were optimised. Further studies were carried out to evaluate the effects on metal uptake after treating yeast with glucose as well as with an organic solvent. The results showed that trace enrichment of the metals under study with yeast, depends upon the amount of yeast biomass, pH and incubation time. Treatment of yeast cells with 10-20 mM glucose concentration enhanced metal uptake with exception to Cr⁶⁺, whose metal enrichment capacity decreased at glucose concentration of 60 mM. Of the investigated organic solvents THF and DMSO showed the highest and lowest capacity, respectively, to enhance metal uptake by yeast cells. Trace enrichment of metal ions from stream water, dam water, treated wastewater from a sewage plant and wastewater from an electroplating plant achieved enrichment factors (EF) varying from 1 to 98, without pre-treatment of the sample. pH adjustment further enhanced the EF for all samples. The results from these studies demonstrate that yeast is a viable trace metal enrichment media that can be used freely suspended in solution to achieve very high EF in aquatic environments.     

Simultaneous determination of seven multiclass veterinary antibiotics in surface water samples in the Republic of Korea using liquid chromatography with tandem mass spectrometry

A simultaneous determination method using solid‐phase extraction and liquid chromatography with tandem mass spectrometry was developed to detect and quantify the presence of seven multiclass veterinary antibiotics (13 compounds in total) in surface water samples, which included the effluents of livestock wastewater and sewage treatment plants, as well as the reservoir drainage areas from dense animal farms. The pH of all water samples was adjusted to 2 or 6 before solid‐phase extraction using Oasis HLB cartridges. The developed method was fully validated in terms of linearity, method detection limit, method quantitation limit, accuracy, and precision. The linearity of all tested drugs was good, with R² determination coefficients ≥ 0.9931. The method detection limits and method quantitation limits were 0.1–74.3 and 0.5–236.6 ng/L, respectively. Accuracy and precision values were 71–120 and 1–17%, respectively. The determination method was successfully applied for monitoring water samples obtained from the Yeongsan River in 2015. The most frequently detected antibiotics were lincomycin (96%), sulfamethazine (90%), sulfamethoxazole (88%), and sulfathiazole (50%); the maximum concentrations of which were 398.9, 1151.3, 533.1, and 307.4 ng/L, respectively. Overall, the greatest numbers and concentrations of detected antibiotics were found in samples from the effluents of livestock wastewater, sewage treatment plants, and reservoir drainage areas. Diverse veterinary antibiotics were present, and their presence was dependent upon the commercial sales and environmental properties of the analytes, the geographical positions of the sampling points, and the origin of the water.     

Determination of phenolic xenoestrogens in environmental samples by liquid chromatography with mass spectrometric detection

A method is proposed for the determination of several phenolic xenoestrogens in aqueous and solid environmental samples. The method uses solid-phase extraction (preceded by ultrasonic solvent extraction for solid samples), reversed-phase liquid chromatographic separation, and mass spectrometric detection using both atmospheric pressure chemical ionization and electrospray ionization. This method was developed to support several studies undertaken to obtain aquatic and sedimentary data for rivers and seashores in Spain that are likely to be contaminated by endocrine-disrupting compounds (EDCs) as a consequence of wastewater discharge. Nonylphenol polyethoxylates (NPEOs), nonylphenoxy carboxylates (NPECs), nonylphenol (NP), octylphenol (OP), and bisphenol A (BPA) were determined in various samples of surface water and sediment, collected at different locations upstream and downstream from outfalls of municipal wastewater treatment plants (WWTPs). Seawater and marine sediments were collected in different harbor areas in Spain. Additionally, WWTP influent and effluents were analyzed to monitor the occurrence and transformation of phenolic EDCs during physicochemical and biological treatment. Rather high concentrations of the compounds investigated were found in some samples. Concentrations of NP were < or = 590 microg/kg in sediments and < or = 15 microg/L in water samples. NPEOs and NPECs were found in water samples in concentrations < or = 41 and < or = 35 microg/L, respectively. In solid samples (river sediment), concentrations of NPEO were < or = 818 microg/kg and those of NP1EC were 95 microg/kg.     

Determination of pharmaceutical compounds in sewage sludge using a standard addition method approach

An analytical method for the simultaneous determination of eight pharmaceutical compounds in biosolids from urban wastewater treatment plants (WWTPs) was developed and validated. The compounds evaluated were non-steroidal anti-inflammatory drugs (naproxen, diclofenac, and ibuprofen), lipid regulators (clofibric acid), and antibiotics (sulfathiazole, sulfapyridine, sulfamethazine, and sulfamethoxazole). Ultrasound assisted extraction with a water–methanol solvent mixture (1:1, v:v) was performed and the compounds were then determined by liquid chromatography coupled with tandem mass spectrometry. The design of the method was based on the application of the standard addition calibration methodology to reduce matrix interferences. Validation procedures were conducted with rabbit excrements as blank samples. Recoveries of the target analytes ranged from 76 to 131% in spiked samples at 50, 200 or 1000 ng g^?1 dry weight (dw). The relative standard deviations were in the range of 5–15% and the method detection limits ranged from 2 to 12 ng g^?1dw. The method was applied to monitor pharmaceutical concentrations in biosolids from different WWTPs over an eight-month period (May to December 2011). Diclofenac, sulfapyridine and ibuprofen were detected in most of the samples whereas sulfamethazine and ibuprofen were the pharmaceuticals found in the highest concentrations (>200 ng g^?1 dw on average).     

Identification of estrogenic activity change in sewage,industrial and livestock effluents by gamma-irradiation

In this study, reduction of estrogenic activity in three different types of effluents from sewage, industrial and livestock wastewater treatment plants by gamma-irradiation was investigated using the yeast two-hybrid assay. After gamma-ray treatment at a dose of 10 kGy, estrogenic activities of sewage, industrial and livestock effluents decreased from 4.4 to 3.0, 1.5 to 1.0 and 16 to 9.9 ng-EEQ L^?1, respectively. The substantial reduction of estrogenic activity in livestock effluent was attributable to the degradation of 17β-estradiol (E2), estrone (E1) and 17α-ethynylestradiol (EE2). Although bisphenol A (BPA) was found at the highest concentration in all effluents, its contribution to the estrogenic activity was not significant due to its low relative estrogenic potency. Meanwhile, the calculated estrogenic activity based on concentrations of E2, E1, EE2 and BPA in the effluents significantly differed from the measured ones. Overestimation may have resulted by dissolved organic matters in effluents inhibiting the estrogenic activity of E2, E1, EE2 and BPA, whereas underestimation was likely due to estrogenic by-products generated by gamma-irradiation.