Water Transport with Ultralow Friction through Partially Exfoliated g-C3N4 Nanosheet Membranes with Self-Supporting Spacers

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) nanosheets show brilliant application potential in numerous fields. Herein, a membrane with artificial nanopores and self-supporting spacers was fabricated by assembly of 2D g-C₃N₄ nanosheets in a stack with elaborate structures. In water purification the g-C₃N₄ membrane shows a better separation performance than commercial membranes. The g-C₃N₄ membrane has a water permeance of 29 L m⁻² h⁻¹ bar⁻¹ and a rejection rate of 87 % for 3 nm molecules with a membrane thickness of 160 nm. The artificial nanopores in the g-C₃N₄ nanosheets and the spacers between the partially exfoliated g-C₃N₄ nanosheets provide nanochannels for water transport while bigger molecules are retained. The self-supported nanochannels in the g-C₃N₄ membrane are very stable and rigid enough to resist environmental challenges, such as changes to pH and pressure conditions. Permeation experiments and molecular dynamics simulations indicate that a novel nanofluidics phenomenon takes place, whereby water transport through the g-C₃N₄ nanosheet membrane occurs with ultralow friction. The findings provide new understanding of fluidics in nanochannels and illuminate a fabrication method by which rigid nanochannels may be obtained for applications in complex or harsh environments.     

Fabrication of novel Ag/g-C3N4 electrode for resveratrol sensors

Ag/g-C₃N₄ is fabricated and used as an electrode for determining trans-resveratrol concentration. The compositional and structural characteristics of the as-fabricated Ag/g-C₃N₄ are studied through X-ray diffraction, transmission electron microscopy, and energy dispersive spectroscopy. Additionally, the electrochemical behavior of Ag/g-C₃N₄ is investigated using cyclic voltammetry. According to the experimental results, 1 wt%Ag/g-C₃N₄ exhibits an oxidation peak at 0.48 V, with a low detection limit (1.88 × 10⁻⁷ M) and satisfactory correlation coefficient (0.9975), suggesting that the proposed Ag/g-C₃N₄ electrode can be successfully used for detecting trans-resveratrol.     

Ag nanoparticles loaded on porous graphitic carbon nitride with enhanced photocatalytic activity for degradation of phenol

Highly efficient photocatalyst of visible-light-driven Ag nanoparticles loaded on porous graphitic carbon nitride (g-C₃N₄) was prepared by the reduction of Ag ions on porous g-C₃N₄. The obtained Ag/porous g-C₃N₄ composite products were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), UV-vis diffuse reflection spectra (DRS), thermal gravimetric analysis (TGA). The results demonstrated that a homogeneous distribution of Ag NPs of 10 nm was attached onto the surface of the porous g-C₃N₄. The prepared Ag/porous g-C₃N₄ samples were applied for catalyzing the degradation of phenol in water under visible light irradiation. Porous g-C₃N₄ demonstrated an excellent support for the formation and dispersion of small uniform Ag NPs. When the weight percentage of Ag reaches 5%, the nanohybrid exhibits superior photocatalytic activities compared to bulk g-C₃N₄, porous g-C₃N₄, and 2% Ag/porous g-C₃N₄ hybrids. The enhanced photocatalytic performance is due to the synergic effect between Ag and porous g-C₃N₄, which suppressed the recombination of photogenerated electron-hole pairs.     

Enhanced oxidase-like activity of g-C3N4 nanosheets supported Pd nanosheets for ratiometric fluorescence detection of acetylcholinesterase activity and its inhibitor

The undesirable enzymatic activity of nanozymes under near neutral p H condition and the traditional single signal output always restrict the analytical application of nanozyme-based biosensors.Herein,graphitic carbon nitride nanosheets supported palladium nanosheets composite （Pd/g-C₃N₄） with both oxidase-like activity and fluorescent property is synthesized.Notably,Pd/g-C₃N₄exhibits enhanced oxidase-like activity compared to Pd NSs under p H 7.4.By c...     

g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。     

Nanocavity-assisted single-crystalline Ti3+ self-doped blue TiO2(B) as efficient cocatalyst for high selective CO2 photoreduction of g-C3N4

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) has invoked significant interest for photocatalytic applications for its excellent features such as high surface area, visible light absorption, and easy transportation of photogenerated charge carriers, but the most reported g-C₃N₄ show relatively low photoactivity due to inferior conductivity and rapid recombination of carriers. These can be overcome by inducing porosity in g-C₃N₄, followed by exfoliation and combining with other materials. Herein, we synthesize nanocavity-assisted oxygen-deficient Ti³⁺ self-doped blue TiO₂(B) nanorods (BT) and integrate them on exfoliated porous g-C₃N₄ (PCN). The synthesized materials are tested for photocatalytic conversion of CO₂ into solar fuels (H₂, CO, and CH₄). The fabricated BT/PCN heterostructures exhibit higher photocatalytic CO₂ conversion activity and 92% CO-evolving selectivity than BT and PCN. The enhancement in activity of BT/PCN can be attributed to the efficient separation and transportation of charge carriers, facilitated by the unique properties of BT, PCN, and their synergistic interactions. We believe that these results can contribute to the improvement of cost-effectiveness, feasibility, and overall performance for real photocatalytic systems.     

Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

Hydrocarbon production by addition of Cu-ZnO on g-C3N4 for CO2 conversion

In this study, copper/zinc oxide/graphite nitrogen carbide (Cu/ZnO/g-C₃N₄) is prepared using a hydrothermal method and applied as a photocatalyst for CO₂ photoreduction. The morphology and structural properties of the obtained Cu/ZnO/g-C₃N₄ are systematically characterized through X-ray powder diffraction, ultraviolet–visible absorption spectroscopy, transmission electronic microscopy, and photoluminescence spectroscopy. A 3 wt% Cu/ZnO/g-C₃N₄ photocatalyst exhibits high CH₄ (40.7 μmol g⁻¹ hr⁻¹), CO (65.1 μmol g⁻¹ hr⁻¹), and CH₃OH (92.5 μmol g⁻¹ hr⁻¹) production rates, which are 38.3, 77.1, and 58.1 fold higher than the pure g-C₃N₄. The production rate is higher than those for bulk g-C₃N₄ and ZnO/g-C₃N₄. Finally, the reaction mechanism of Cu/ZnO/C₃N₄ is proposed in this study.     

Ferrite Nanocomposite Based Electrochemical Sensor: Characterization,Voltammetric and Amperometric Studies for Electrocatalytic Detection of Formaldehyde in Aqueous Media

Development of nanocomposite based electrochemical sensors for detection of toxic chemicals describes an environmentally benign strategy for monitoring the health of ecosystem. Herein, we reported in situ preparation of graphitic carbon nitride (g-C₃N₄) decorated Ag₂S/NiFe₂O₄ nanocomposite sensor by facile precipitation method. The electrochemical studies demonstrated efficient electrocatalytic activity of ternary nanocomposite pasted glassy carbon electrode (g-C₃N₄@Ag₂S/NiFe₂O₄/GCE) for selective detection of formaldehyde. Moreover, fabricated sensor exhibit rapid amperometric response with excellent selectivity, remarkable sensitivity (1681 μA mmol L⁻¹ cm⁻²) and lower detection limit (LOD: 1.63 μmol L⁻¹). It is noteworthy to mention that sensor exhibits good operational and long-term storage stability.     

Label-free photoelectrochemical sensor based on 2D/2D ZnIn2S4/g-C3N4 heterojunction for the efficient and sensitive detection of bisphenol A

Photoelectrochemical （PEC） sensor is an emerging technology in analysis as the advantage of fast response,high sensitivity and uncomplicated operation.In this study,an effective label-free PEC sensor for bisphenol A （BPA） detecting is constructed,in which Zn In₂S₄/g-C₃N₄heterojunction is prepared via a simple hydrothermal method.The characterization outcomes display that the formation of p-n heterojunction helps for promoting the separation efficiency ...     

Defects Promote Ultrafast Charge Separation in Graphitic Carbon Nitride for Enhanced Visible-Light-Driven CO2 Reduction Activity

Fundamental photocatalytic limitations of solar CO₂ reduction remain due to low efficiency, serious charge recombination, and short lifetime of catalysts. Herein, two-dimensional graphitic carbon nitride nanosheets with nitrogen vacancies (g-C₃N_x) located at both three-coordinate N atoms and uncondensed terminal NH_x species were prepared by one-step tartaric acid-assistant thermal polymerization of dicyandiamide. Transient absorption spectra revealed that the defects in g-C₃N₄ act as trapped states of charges to result in prolonged lifetimes of photoexcited charge carriers. Time-resolved photoluminescence spectroscopy revealed that the faster decay of charges is due to the decreased interlayer stacking distance in g-C₃N_x in favor of hopping transition and mobility of charge carriers to the surface of the material. Owing to the synergic virtues of strong visible-light absorption, large surface area, and efficient charge separation, the g-C₃N_x nanosheets with negligible loss after 15 h of photocatalysis exhibited a CO evolution rate of 56.9 μmol g⁻¹ h⁻¹ under visible-light irradiation, which is roughly eight times higher than that of pristine g-C₃N₄. This work presents the role of defects in modulating light absorption and charge separation, which opens an avenue to robust solar-energy conversion performance.     

Facile synthesis of GO as middle carrier modified flower-like BiOBr and C3N4 nanosheets for simultaneous treatment of chromium(VI) and tetracycline

A novel GO modified g-C₃N₄ nanosheets/flower-like BiOBr hybrid photocatalyst is fabricated by a facile method. The characterization results reveal that wrinkled GO is deposited between g-C₃N₄ nanosheets and flower-like BiOBr forming a Z-scheme heterojunction. As a mediator, plicate GO plays a positive role in prompting photogenerated electrons transferring through its sizeable 2D/2D contact surface area. The g-C₃N₄/GO/BiOBr hybrid displays a superior photocatalytic ability to g-C₃N₄ and BiOBr in photodegrading tetracycline (TC), whose removal efficiency could reach 96% within 2 h. Besides, g-C₃N₄/GO/BiOBr composite can reduce Cr(VI), and simultaneously treat TC and Cr(VI) combination contaminant under the visible light. The g-C₃N₄/GO/BiOBr ternary composite also exhibits satisfactory stability and reusability after four cycling experiments. Further, a feasible mechanism related to the photocatalytic process of g-C₃N₄/GO/BiOBr is put forward. This study offers a ternary hybrid photocatalyst with eco-friendliness and hopeful application in water pollution.     

Electrochemiluminescence biosensor for carcinoembryonic antigen detection based on Au-Ag/g-C3N4 nanocomposites

Herein, an electrochemiluminescence (ECL) aptasensor for carcinoembryonic antigen (CEA) detection was developed based on Au-Ag/g-C₃N₄ nanocomposites (NCs), which were synthesized by decorating graphitic carbon nitride (g-C₃N₄) nanosheets with alloy-structured Au-Ag bimetallic nanoparticles (NPs) via one-step in situ chemical reduction. As ECL sensing platform, Au-Ag/g-C₃N₄ NCs could significantly improve the ECL intensity of luminol due to the good conductivity of Au-Ag NPs, electrocatalytic activity for oxygen evolution reaction (OER) and the ability to adsorb luminol via π stacking interaction. In addition, it could load the thiol terminated aptamers of CEA via Au-S or Ag-S bonds. In the presence of CEA, the ECL response of the proposed biosensor decreased significantly due to the fact that the assembled protein layers hindered the electron transfer and the diffusion of ECL reactants toward the electrode surface. The proposed ECL sensor exhibited a good linear relationship with CEA in the range of 1.0–1.0 × 10^?6 ng/mL with a detection limit of 8.9 × 10^?7 ng/mL. The satisfactory results were obtained in the detection of CEA in human serum samples.     

Two-dimensional g-C3N4 nanosheets-based photo-catalysts for typical sustainable processes

Graphitic carbon nitride (g-C₃N₄) has been widely studied as a visible light responsive photocatalyst in recent years, due to its facile synthesis, low cost, high stability, and appropriate bandgap/band positions. In this review, we firstly introduce and compare various exfoliation approaches of bulk g-C₃N₄ into ultrathin g-C₃N₄ nanosheets. Then, many modification strategies of g-C₃N₄ nanosheets are also reviewed, including heterojunction construction, doping, defect control, and structure design. Thereafter, the charge transfer mechanism in g-C₃N₄ nanosheets based heterojunctions is present, e.g., Z-scheme, S-scheme and other forms. Besides, the photocatalytic applications of g-C₃N₄ nanosheets based photocatalysts are summarized including environmental remediation, energy generation and storage, organic synthesis, and disinfection. This review ends with a summary and some perspectives on the challenges and new directions in exploring g-C₃N₄ nanosheets-based photocatalysts.     

Surface molecular imprinting on g-C3N4 photooxidative nanozyme for improved colorimetric biosensing

Graphitic carbon nitride (g-C₃N₄), as a visible-light-active organic semiconductor, has attracted growing attentions in photocatalysis and photoluminescence-based biosensing. Here, we demonstrated the intrinsic photooxidase activity of g-C₃N₄ and then surface molecular imprinting on g-C₃N₄ nanozymes was achieved for improved biosensing. Upon blue LED irradiation, the g-C₃N₄ exhibited superior enzymatic activity for oxidation of chromogenic substrate like 3,3′,5,5′-tetramethylbenzidine (TMB) without destructive H₂O₂. The oxidation was mainly ascribed to O₂⁻ that was generated during light irradiation. The surface molecular imprinting on g-C₃N₄ can lead to an over 1000-fold alleviation in matrix-interference from serum samples, 4-fold improved enzymatic activity as well as enhanced substrate specificity comparing with bare g-C₃N₄ during colorimetric sensing. Also, the MIP-g-C₃N₄ possesses a high affinity to TMB with a K_m value of only 22 μmol/L, much lower than other comment nanozymes like AuNPs, Fe₃O₄ NPs, etc. It was successfully applied for detection of cysteine in serum sample with satisfactory recoveries.     

Advantageous Interfacial Effects of AgPd/g-C3N4 for Photocatalytic Hydrogen Evolution: Electronic Structure and H2O Dissociation

Bimetallic AgPd nanoparticles have been synthesized before, but the interfacial electronic effects of AgPd on the photocatalytic performance have been investigated less. In this work, the results of hydrogen evolution suggest that the bimetallic AgPd/g-C₃N₄ sample has superior activity to Ag/g-C₃N₄ and Pd/g-C₃N₄ photocatalysts. The UV/Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, CO adsorption diffuse reflectance FTIR spectroscopy, and FTIR results demonstrate that in the AgPd/g-C₃N₄, the surface electronic structures of Pd and Ag are changed, which is beneficial for faster photogenerated electron transfer and greater H₂O molecule adsorption. In situ ESR spectra suggest that, under visible light irradiation, there is more H₂O dissociation to radical species on the AgPd/g-C₃N₄ photocatalyst. Furthermore, DFT calculations confirm the interfacial electronic effects of AgPd/g-C₃N₄, that is, Pd^δ−⋅⋅⋅Ag^δ+, and the activation energy of H₂O molecule dissociation on AgPd/g-C₃N₄ is the lowest, which is the main contributor to the enhanced photocatalytic H₂ evolution.     

Boron doped 1T phase MoS2 as a cocatalyst for promoting photocatalytic H2 evolution of g-C3N4 nanosheets

As one of the 2D transition metal sulfides,1T phase MoS₂ nanosheets (NSs) have been studied because of their distinguished conductivity and suitable electronic structure.Nevertheless,the active sites are limited to a small number of edge sites only,while the basal plane is catalytically inert.Herein,we report that boron (B) doped 1T phase Mo S₂NSs can replace precious metals as a co-catalyst to assist in photocatalytic H₂production of 2D layered g-C₃N<...     

One-step fabrication and high photocatalytic activity of porous graphitic carbon nitride/graphene oxide hybrid by direct polymerization of cyanamide without templates

Graphene oxide modified porous g-C₃N₄ (porous g-C₃N₄/GO) had been synthesized by means of one-step calcination of cyanamide for efficient photocatalysis under visible light irradiation (λ > 400 nm). We expect that the photocatalytic activity of this hybrid photocatalyst could be enhanced by the efficient visible light absorption due to the porous structure and efficient photo generated charge separation at the heterojunction formed between porous g-C₃N₄ and GO. Scanning electron microscopy (SEM) images demonstrated that the as prepared photocatalyst is composed of GO and porous g-C₃N₄. The UV-vis diffuse reflectance spectrum shows that optical absorption of porous g-C₃N₄/GO is more intensive than for pristine g-C₃N₄. The enhanced generation of photocurrent under visible light irradiation (λ > 400 nm) is observed for the porous g-C₃N₄/GO. The results of photocatalytic experiments reveal that the pseudofirst-order kinetic constant of photocatalytic degradation of methylene blue (MB) using the porous g-C₃N₄/GO is 6 times higher than that of pristine g-C₃N₄.     

Fast electron transfer and enhanced visible light photocatalytic activity by using poly-o-phenylenediamine modified AgCl/g-C3N4 nanosheets

Exfoliation of bulk graphitic carbon nitride (g-C₃N₄) into two-dimensional (2D) nanosheets is one of the effective strategies to improve its photocatalytic properties so that the 2D g-C₃N₄ nanosheets (CN) have larger specific surface areas and more reaction sites. In addition, poly-o-phenylenediamine (PoPD) can improve the electrical conductivity and photocatalytic activity of semiconductor materials. Here, the novel efficient composite PoPD/AgCl/g-C₃N₄ nanosheets was first synthesized by a precipitation reaction and the photoinitiated polymerization approach. The obtained photocatalysts have larger specific surface areas and could achieve better visible-light response. However, silver chloride (AgCl) is susceptible to agglomeration and photocorrosion. The PoPD/AgCl/CN composite exhibits an extremely high photocurrent density, which is three times that of CN. Obviously enhanced photocatalytic activities of PoPD/AgCl/g-C₃N₄ are revealed through the photodegradation of tetracycline. The stability of PoPD/AgCl/CN is demonstrated based on four cycles of experiments that reveal that the degradation rate only decreases slightly. Furthermore, ?O₂^? and h⁺ are the main active species, which are confirmed through a trapping experiment and ESR spin-trap technique. Therefore, the prepared PoPD/AgCl/CN can be considered as a stable photocatalyst, in which PoPD is added as a charge carrier and acts a photosensitive protective layer on the surface of the AgCl particles. This provides a new technology for preparing highly stable composite photocatalysts that can effectively deal with environmental issues.