Construction of triblock copolymer-gold nanorod composites for fluorescence resonance energy transfer via pH-sensitive allosteric

To explore the effects of microenvironmental adjustments on fluorescence, a pH-sensitive nano-composite system based on fluorescence resonance energy transfer (FRET) was constructed. The model system included a modified triblock copolymer (polyhistidine-b-polyethylene glycol-b-polycaprolactone) and gold nanoparticles. A near-infrared dye was used as the donor, and spectrally matched gold nanorods, attached after C-terminus modification with α-lipoic acid, were used as the receptor to realize control of the FRET effect over the fluorescence intensity for two polymer configurational changes (i.e., “folded” and “stretched” states) in response to pH. After synthesis and characterization, we investigated the self-assembly behavior of the system. Analysis by quartz crystal microbalance revealed the pH sensitivity of the polymer, which exhibited “folding” and “stretching” states with changes in pH, providing a structural basis for the FRET effect. Fluorescence spectrophotometry investigations also revealed the regulatory impact of the assembled system on fluorescence.     

Optimization of a sensitive method for the “switch-on” determination of mercury(II) in waters using Rhodamine B capped gold nanoparticles as a fluorescence sensor

Monodisperse and “naked” gold nanoparticles (GNPs) were modified with thioglycolic acid (TGA). The fluorescence of rhodamine B (RB) is quenched completely by the gold NPs surface with negative charge mainly as a result of fluorescence resonance energy transition (FRET) and collision. The quenching mechanism can be described by a Langmuir isotherm, which was systematically investigated by steady-state fluorescence spectrometry and absorption spectrometry. Hg(II) ion disrupts the GNPs–RB pair, producing a large “switch-on” fluorescence. A low background, highly sensitive and reproducible fluorescence assay for Hg(II) is presented. Under the optimum conditions, the restoration fluorescence intensity is proportional to the concentration of Hg(II). The calibration graphs are linear over the range of 1.0?×?10^?9 to 3.1?×?10^?8 mol L^?1 with a detection limit of 4.0?×?10^?10 mol L^?1. The relative standard deviation was 1.2% for a 5.0?×?10^?9 mol L^?1 Hg(II) solution (N?=?6). This method was applied to the analysis of Hg(II) in environmental water samples, and the results were consistent with those of atomic absorption spectroscopy (AAS).     

Remarkable pH-responsive Microfiltration Membrane from Well-defined PS-b-PDEAEMA Copolymers by ATRP Method

This work presented a detailed study on pH-responsive self-supporting microfiltration membranes via the non-solvent-induced phase separation (NIPS) process from mixtures of THF and DMF. The well-defined pH-responsive polymers polystyrene-block-poly (N,N-diethylaminoethyl methacrylate) (PS-b-PDEAEMA) were synthesized via atom transfer radical polymerization (ATRP) evidenced by ¹H-NMR and GPC studies. Two amphiphilic diblock copolymers were used, St₇₁-b-DEAEMA₃₁ and St₇₁-b-DEAEMA₈₂. The influence of pH value in the coagulation bath, the solvent composition, the “open-time” before immersion into the coagulation bath and the polymer composition onto the membrane morphology were investigated, and flux values obtained for the different membrane systems were compared. The SEM images and polarized optical microscopy revealed that the size and the number of pores in the membranes were larger along with the decreasing THF content and “open time”. For the copolymer with the longer PDEAEMA block, St₇₁-b-DEAEMA₈₂, the flux values were lower than that of St₇₁-b-DEAEMA₃₁ under different “open time”, which meant that the total area of the pores in the membranes was smaller, respectively. The optimum preparation conditions for microfiltration membrane were as follows: the polymer was St₇₁-b-DEAEMA₈₂, the “open time” was 20s, the non-solvent bath was the pH = 2 distilled water, and the solvent composition was 25% THF and 75% DMF. Both polymers were shown to form self-supporting membrane systems that were able to react onto pH stimuli in terms of water flux.     

Redox-responsive polymer prodrug/AgNPs hybrid nanoparticles for drug delivery

The redox-responsive hybrid nanoparticles of P(MACPTS-co-MAGP)@AgNPs is developed for drug delivery and fluorescence monitoring of the drug release by applying the NSET-based strategy.     

Debundling of multiwalled carbon nanotubes in N,N-dimethylacetamide by polymers

Structure and properties of the dispersions of multiwalled carbon nanotubes (MWCNTs) in N,N-dimethylacetamide (DMAc) with different dispersing polymers: polyvinylpyrrolidone (PVP), poly(ethyleneoxide), triblock copolymers poly(ethyleneoxide)-b-poly(propyleneoxide)-b-poly(ethyleneoxide) (Pluronic F127 and Pluronic F108), ethylenediamine tetrakis(ethoxylate-b-propoxylate) tetrol, and ethylenediamine tetrakis(propoxylate-b-ethoxylate) tetrol (Tetronic) of different molecular weights were studied. All studied polymers were shown to be able to disperse MWCNT in DMAc, and MWCNT dispersions appear free of aggregates by visual inspection even after 3 months of keeping at room temperature. Dispersions were characterized by UV–VIS absorption spectroscopy and dynamic light scattering measurements. PVP was found to be the best dispersing polymer for MWCNT in DMAc. It was shown that the yield of the dispersed MWCNT and the average particle size of the MWCNT in DMAc depend on the chemical nature, molecular weight of the dispersing polymer, and solvent quality. The difference in dispersive capacity of the studied polymers is attributed to different dispersion mechanisms for PVP (“polymer wrapping” model) and for other studied dispersing polymers (“loose adsorption” model), which have different efficiencies in DMAc. It was revealed that an increase of dispersing polymer (PVP) concentration at the range of 4.7–37.6 g l^?1 results in an average particle size enlargement and MWCNT final concentration reduction.     

Synthesis and characterization of pH-responsive diblock copolymers with cadaverine side groups

In this paper, we report the synthesis and characterization of a new pH-responsive diblock copolymer, methoxy poly(ethylene glycol)-b-poly[N¹-(4-vinylbenzyl) pentane-1,5-diamine dihydrochloride] (mPEG-b-PVBPDA). The monomer with cadaverine side group (N¹-(4-vinylbenzyl)pentane-1,5-diamine dihydrochloride, VBPDA) and the macroinitiator (mPEG-ACVA) were synthesized, respectively, and mPEG-b-PVBPDA was then obtained by free radical polymerization. The structure and molecular weight of mPEG-b-PVBPDA was confirmed by FTIR, ¹H NMR, and GPC-MALLS measurements. At low pH, it is hydrophilic due to the protonation of the amine groups. With increasing pH, deprotonation occurs, and the hydrophobicity of PVBPDA block increases. This molecular feature leads to interesting aggregation behavior of mPEG-b-PVBPDA in aqueous solutions at different pH as revealed by DLS measurements, TEM observations, and fluorescence spectrometry. This polymer was further subjected to gene delivery evaluations, and promising DNA transfection capacity has been found.     

六、七、八元瓜环与苯胺系列衍生物的相互作用

利用紫外吸收光谱、荧光光谱以及¹H NMR方法详细考察了六、七、八元瓜环(Q[6], Q[7], Q[8])与苯胺系列衍生物客体的相互作用和体系pH对其作用的影响. 实验结果表明, 3种瓜环与苯胺系列衍生物客体的相互作用强弱、作用比例以及作用模式与体系的酸度密切相关: 在“高”或“低”pH条件下, 未观察到瓜环与这些客体的明显作用; 在介于“高”与“较高”或“低”与“较低”的pH范围, 瓜环与这些客体发生相互作用, 形成1∶1的包结配合物; 而在介于“较高”与“较低”的pH范围, 瓜环与这些客体发生相互作用, 可形成1∶2的包结配合物. 对于不同的瓜环-客体作用体系, 相应的pH范围各不相同. 本文利用简便的实验方法, 测试了这些pH值及其范围. 根据测定的结果, 结合瓜环以及客体的结构特征, 对体系主客体在不同的酸度区域表现出的不同作用模式进行了探讨.     

pH-responsive polymersome based on PMCP-<Emphasis Type="Italic">b</Emphasis>-PDPA as a drug delivery system to enhance cellular internalization and intracellular drug release

Choline phosphate (CP) as a novel zwitterion possesses specific and excellent properties compared with phosphorylcholine (PC), as well as its polymer, such as poly(2-(methacryloyloxy)ethyl choline phosphate) (PMCP), has been studied extensively due to its unique characteristics of rapid cellular internalization via the sepcial quadrupole interactions with the cell membrane. Recently, we reported a novel PMCP-based drug delivery system to enhance the cellular internalization where the drug was conjugated to the polymer via reversible acylhydrazone bond. Herein, to make full use of this feature of PMCP, we synthesized the diblock copolymer poly(2-(methacryloyloxy)ethyl choline phosphate)-b-poly(2-(diisopropylamino)ethyl methacrylate) (PMCP-b-PDPA), which could self-assemble into polymersomes with hydrophilic PMCP corona and hydrophobic membrane wall in mild conditions when the pH value is ≥ 6.4. It has been found that these polymersomes can be successfully used to load anticancer drug Dox with the loading content of about 11.30 wt%. After the polymersome is rapidly internalized by the cell with the aid of PMCP, the loaded drug can be burst-released in endosomes since PDPA segment is protonated at low pH environment, which renders PDPA to transfer from hydrophobic to hydrophilic, and the subsequent polymersomes collapse thoroughly. Ultimately, the “proton sponge” effect of PDPA chain can further accelerate the Dox to escape from endosome to cytoplasm to exert cytostatic effects. Meanwhile, the cell viability assays showed that the Dox-loaded polymersomes exhibited significant inhibitory effect on tumor cells, indicating its great potential as a targeted intracellular delivery system with high efficiency.     

Quest for novel fluorogenic xanthene dyes: Synthesis,spectral properties and stability of 3-imino-3H-xanthen-6-amine (pyronin) and its silicon analog

To expand the range of primary aniline fluorophores available and suitable for the design of fluorogenic protease probes, the synthesis of 3-imino-3H-xanthen-6-amine (known as pyronin) and its silicon analog (Si-pyronin) was explored and presented here. A comprehensive photophysical study of these two fluorescent anilines, confirms the effectiveness of the heteroatom-substitution approach (O?→?SiMe₂) to yield dramatic red-shifts in absorption and fluorescence maxima of the xanthene scaffold (+85?nm). However, it also revealed its adverse effect on the hydrolytic stability of the Si-pyronin, especially at physiological pH. The pro-fluorescent character and utility of these two fluorogenic (hetero)xanthene dyes are also proved by the preparation and in vitro validation of activatable fluorescence “turn-on” probes for penicillin G acylase (PGA).     

Rapid detection of pathogenic bacteria based on a universal dual-recognition FRET sensing system constructed with aptamer-quantum dots and lectin-gold nanoparticles

The threat to public health from bacterial infections has led to an urgent need to develop simpler, faster and more reliable bacterial detection methods. In this work, we developed a universal dual-recognition based sandwich fluorescence resonance energy transfer (FRET) sensor by using specific aptamer-modified quantum dots (Aptamer-QDs) as energy donor and lectin concanavalin A (Con A) modified gold nanoparticles (Con A-AuNPs) as energy acceptor to achieve rapid and sensitive detection of Escherichia coli (E. coli) within 0.5 h. In the presence of the target E. coli, the energy donor of Aptamer-QDs and acceptor of Con A-AuNPs were close to each other, causing changes of FRET signals. Based on the constructed FRET sensor, a linear detection range of from 10² cfu/mL to 2 × 10⁸ cfu/mL with the detection limit of 45 cfu/mL for E. coli was achieved. Furthermore, the FRET sensor was applied to detect E. coli in the milk and orange juice with the detection limit of 300 cfu/mL and 200 cfu/mL, respectively and recovery rate from 83.1% to 112.5%. The strategy holds great promise in pathogenic bacteria detection due to its rapid and sensitivity.     

Intrinsically Porous Polymer Protects Catalytic Gold Particles for Enzymeless Glucose Oxidation

The enzymeless glucose oxidation process readily occurs on nano‐gold electrocatalyst at pH 7, but it is highly susceptible to poisoning (competitive binding), for example from protein or chloride. Is it shown here that gold nanoparticle catalyst can be protected against poisoning by a polymer of intrinsic microporosity (PIM‐EA‐TB with BET surface area 1027 m² g^?1). This PIM material when protonated, achieves a triple catalyst protection effect by (i) size selective repulsion of larger protein molecules (albumins) and (ii) membrane ion selection effects, and (iii) membrane ion activity effects. PIM materials allow “environmental control” to be introduced in electrocatalytic processes.     

Facile construction of targeted pH-responsive DNA-conjugated gold nanoparticles for synergistic photothermal-chemotherapy

Recently, stimuli-responsive DNA nanostructure-based nanodevices have been applied for cancer therapy. In this study, pH-responsive i-motif DNA was modified on gold nanoparticles (AuNPs) via a facile, time-saving freeze-thaw method and utilized to construct stimuli-responsive drug nanocarriers. When the environment pH changes from 7.4 to 5.0, the i-motif DNA would be folded into four-stranded (C-quadruplex) that could be characterized by circular dichroism, and the characteristic of acid stimulate was verified by fluorescence resonance energy transfer (FRET). To enhance specifical cellular uptake, MUC1 aptamer was employed as the targeting moiety. Doxorubicin (Dox) is an anticancer drug that can be efficiently intercalated into GC base pairs of DNA nanostructure to form drug-loaded nanovehicles (Dox@AuNP-MUC1). Additionally, owing to the excellent photothermal conversion efficiency of AuNPs, the synergistic effect between chemotherapy and PTT can be readily achieved by 808 nm near-infrared (NIR) irradiation, which exhibits specifically and efficiently anticancer efficiency. Hence, this multifunctional drug carrier shows the potential for synergistic photothermal-chemotherapy.     

Isoindigo‐3,4‐Difluorothiophene Polymer Acceptors Yield “All‐Polymer” Bulk‐Heterojunction Solar Cells with over 7 % Efficiency

Poly(isoindigo‐alt‐3,4‐difluorothiophene) (PIID[2F]T) analogues used as “polymer acceptors” in bulk‐heterojunction (BHJ) solar cells achieve >7 % efficiency when used in conjunction with the polymer donor PBFTAZ (model system; copolymer of benzo[1,2‐b:4,5‐b′]dithiophene and 5,6‐difluorobenzotriazole). Considering that most efficient polymer‐acceptor alternatives to fullerenes (e.g. PC₆₁BM or its C₇₁ derivative) are based on perylenediimide or naphthalenediimide motifs thus far, branched alkyl‐substituted PIID[2F]T polymers are particularly promising non‐fullerene candidates for “all‐polymer” BHJ solar cells.     

Synthesis and photochemistry of pH-sensitive GFP chromophore analogs

GFP chromophore analogs (7a-e, 8, and 10a,b) containing 2-thienyl-, 5-methyl-2-furyl-, 2-pyrryl, and 6-methyl-2-pyridyl-groups were synthesized and their fluorescence spectra recorded in the pH range 1-7. NMR studies showed that protonation of 8 (2-thienyl system) inhibited photoisomerization (Z-E) about the exocyclic double bond but that protonation of 7c (E + Z) (2-pyrryl system) gave only 7cE. Fluorescence studies revealed enhancement of fluorescence intensity of 7c and 7b,e (furyl system) below pH 2.5 and gave a similar result for 10a (pyridyl system) below pH 6. Quantum yields at pH 1 were low, probably due to excited state proton transfer (ESPT).     

Specific thermoresponsiveness of PMMA-block-PDMAEMA to selected ions and other factors in aqueous solution

Poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) is a functional polymer that presents positive charges at low and neutral pHs. Copolymers bearing PDMAEMA blocks usually show a thermal behavior in water marked by a lower critical solution temperature (LCST). This behavior suggests them as interesting “smart” materials for several applications such as water decontamination and many others. In the present work, the LCST of a poly(methyl methacrylate)-block-poly(2-(dimethylamino)ethyl methacrylate) (PMMA-b-PDMAEMA) synthesized by RAFT was measured in several conditions in aqueous solution. It was demonstrated that ionic strength modulates the LCST and this effect depends on the nature of the anion. For instance, weakly hydrated anions such as perchlorate make the LCST lower as the ionic strength gets higher, on the other hand, strongly hydrated ions such as sulfate have not shown a marked effect on LCST. Those results were understood as a consequence of the specific binding of each anion onto the positive-charged PDMAEMA chains, changing the interactions between the chains and water molecules, as well as affecting their pK _a and the ionic interactions. Also, as expected, the LCST is very dependent on pH. The overall results point to the opportunity of modulating very precisely the thermal behavior of PMMA-b-PDMAEMA systems by usual solution conditions such as the type of the anion present.     

Optimization of bioreducible micelles self‐assembled from amphiphilic hyperbranched block copolymers for drug delivery

Dendritic polymers‐based unimolecular micelles with enhanced stability are attractive carriers. However, the preparation of dendrimers or dendrons with higher generation remains substantially synthetic challenge due to the increased steric hindrance, multistep and tedious preparation, and low yields. The adoption of Boltorn H40, a commercially available dendritic polymer of Boltorn family containing multiple hydroxyl groups with various functionalities as a dendrimer‐based starting core template for the generation of hyperbranched polymers, offers a straightforward solution to address this problem. To develop universal strategies toward H40‐based amphiphilic block copolymers, the “grafting from” and “grafting to” approaches were both applied in this study. The reduction‐insensitive block copolymers, H40‐b‐poly(ɛ‐caprolactone)‐b‐poly(oligo(ethylene glycol) monomethyl ether methacrylate) (H40‐b‐PCL‐b‐POEGMA), were synthesized by “grafting from” including sequential ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The core structure and the polymer composition of the nonreducible amphiphilic hyperbranched block copolymers were optimized toward better properties and performance for drug delivery applications, and H40‐PCL₁₅‐b‐POEGMA₂₃ was screened as the best polymer construct relative to H20‐PCL₁₅‐b‐POEGMA₂₃ and H40‐PCL₁₅‐b‐POEGMA₃₂ in terms of micelle stability and drug loading capacity. Therefore, the reducible H40‐b‐PCL‐SS‐POEGMA with an identical core and polymer composition to that of H40‐PCL₁₅‐b‐POEGMA₂₃ was further prepared by “grafting to” using click coupling between H40‐PCL‐azide and P(OEGMA)‐alkyne. The delivery efficacy evaluated by an in vitro cytotoxicity study revealed that the resulting DOX‐loaded reducible micelles of H40‐PCL₁₅‐SS‐POEGMA₂₃ produced greater cytotoxicity in cancer cells than in normal cells and macrophages, therefore, are promising carriers for anticancer drug delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1383–1394     

Supramolecular Fluorescent Nanoparticles Constructed via Multiple Non‐Covalent Interactions for the Detection of Hydrogen Peroxide in Cancer Cells

Overabundance of hydrogen peroxide originating from environmental stress and/or genetic mutation can lead to pathological conditions. Thus, the highly sensitive detection of H₂O₂ is important. Herein, supramolecular fluorescent nanoparticles self‐assembled from fluorescein isothiocyanate modified β‐cyclodextrin (FITC‐β‐CD)/rhodamine B modified ferrocene (Fc‐RB) amphiphile were prepared through host–guest interaction between FITC‐β‐CD host and Fc‐RB guest for H₂O₂ detection in cancer cells. The self‐assembled nanoparticles based on a combination of multiple non‐covalent interactions in aqueous medium showed high sensitivity to H₂O₂ while maintaining stability under physiological condition. Owing to the fluorescence resonance energy transfer (FRET) effect, addition of H₂O₂ led to obvious fluorescence change of nanoparticles from red (RB) to green (FITC) in fluorescent experiments. In vitro study showed the fluorescent nanoparticles could be efficiently internalized by cancer cells and then disrupted by endogenous H₂O₂, accompanying with FRET from “on” to “off”. These supramolecular fluorescent nanoparticles constructed via multiple non‐covalent interactions are expected to have potential applications in diagnosis and imaging of diseases caused by oxidative stresses.     

d-Proline capped gold nanoclusters for turn-on detection of serum Raltitrexed

With d-proline as the reducing and capping agent, fluorescent gold nanoclusters were rapidly prepared (d-Pro@AuNCs) within 10 min at 100 °C. In the present of gold nanoparticles, the fluorescence of d-Pro@AuNCs was remarkably quenched. Interestingly, based on the electrostatic interaction between anticancer drug Raltitrexed and gold nanoparticles induced fluorescence “turn-on” principle, a high selective assay for detection of Raltitrexed was established with the probe associating the fluorescence emission at 435 nm. The fluorescence intensity of d-Pro@AuNCs linearly correlated with the concentration of Raltitrexed in the range from 5.0 μmol/L to 40.0 μmol/L (R² = 0.999) and the limit of detection was 1.9 μmol/L. Further, after Raltitrexed was abdominal injected in rats, a metabolic approach was constructed with the prepared fluorescent probe. It showed great potential of AuNCs-based sensing probes for application in analysis of serum anticancer drugs.     

Effect of inorganic salts on the aggregation behavior of branched block polyether at air/water and n-heptane/water interfaces

The effect of inorganic salts (CaCl₂, MgCl₂, NaCl, NaI and NaSCN) on the aggregation behavior of a synthesized polyether with seven poly (ethylene oxide)-b-poly (propylene oxide)-b-poly (ethylene oxide) (PEO-PPO-PEO) arms attached to a tetraethylenepentamine core (simplified AE73) at air/water and n-heptane/water interfaces has been investigated by interfacial tension and oscillating bubble methods. The additions of NaCl, CaCl₂, and MgCl₂ may facilitate the micellization of AE73 and increase its maximum interfacial excess concentration (Γ_max) due to the “salting out” effect, while NaSCN induces opposite effect and NaI exerts little influence. The adsorption kinetics of AE73 is controlled not only by the diffusion between the bulk solution and the interfacial layer but also by the energetic and steric barriers generated by the already adsorbed molecules. The adsorption relaxation time of AE73 is reduced with the addition of salts and this phenomenon is more prominent at the n-heptane/water interface. The “salting in” ions decrease the dilational modulus of AE73 while the “salting out” ions induce an opposite effect. The mechanisms of the interaction between inorganic ions and the polyether were discussed; the difference in aggregation behavior between linear and branched block polyethers were also compared.     

Ultrasensitive aflatoxin B1 assay based on FRET from aptamer labelled fluorescent polymer dots to silver nanoparticles labeled with complementary DNA

The authors describe a new method for the selective detection of aflatoxin B1 (AFB1) by an off-on signaling procedure in a fluorescence resonance energy transfer (FRET)-based nanobioprobe. An amino-modified aptamer against AFB1 was conjugated to fluorescent polymer dots, containing poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-thiadiazole)] as the fluorophore. Complementary DNA (cDNA) was conjugated to silver nanoparticles (cDNA-AgNPs) which act as FRET acceptors. Mixed in solution, in the absence of AFB1, the aptamer and its cDNA hybridize to form (aptamer-cDNA). This brings the polymer dots into close proximity of the AgNPs and result in FRET from the donor to the acceptor due to spectral overlap between the emission of the polymer dots and the absorption of the AgNPs. The fluorescence of the polymer dots probe is thereby switched off. However, in the presence of AFB1, the aptamer with high affinity for AFB1 will be released from the cDNA-AgNP aggregate, which results in recovery of fluorescence (“switch on” state). The yellow fluorescence of the polymer dots, best measured at 538 nm, increases linearly in the 5 pg·mL^?1 to 1.0 ng·mL^?1 AFB1 concentration range, with a 0.3 pg·mL-1 detection limit. The assay was successfully applied to the detection of AFB1 in (spiked) wheat flour, and the results were found to be in satisfactory agreement with those obtained by an enzyme-linked immunosorbent assay.

Open image in new window

Graphical abstract An efficient FRET-based nano-bio-probe was developed for the selective detection of Aflatoxin B1 (AFB1). In the absence of AFB1, the hybridization occurred between anti-aptamer AFB1 linked to polymer dots and its cDNA conjugated to AgNPs that led to FRET from the polymer dots to the AgNPs. By adding AFB1, the AgNP-cDNA was released resulting in linear recovery of the fluorescence of polymer dots in an appropriate AFB1 concentration range.