Attachment of Fe3O4 nanoparticles on UiO-66: A stable composite for efficient sorption and reduction of selenite from water

In the present work, Fe₃O₄ nanoparticles were attached to the surface of UiO-66, a zirconium-based metal–organic framework material and the composite material formed was used to remove selenite (Se(IV)) in water. The Fe₃O₄/UiO-66 composite were assembled by a facile two-stage strategy. Benefiting from the ultra-high specific surface area of UiO-66, the Fe₃O₄/UiO-66 also had a large specific surface area, which made it easier to expose the active sites of Fe₃O₄ on the surface of UiO-66. The XPS and Mössbauer spectroscopy analysis indicated that there was charge transfer between Fe₃O₄ and UiO-66 in the Fe₃O₄/UiO-66, which made the Fe₃O₄ on the surface of UiO-66 had enhanced reductive activity. The mechanism of Fe₃O₄/UiO-66 to removed Se(IV) from the solution was further investigated by Zeta potential, FT-IR, SEM, TEM, and XPS spectra. The results indicated that the Fe₃O₄ nanoparticles on the surface of UiO-66 not only interacted with selenite through electrostatic action and inner-sphere complex but could also reduce a large amount of selenite to the insoluble Se⁰. The combination of these three actions finally strengthened the removal of selenite. This study cloud promote the practical application of MOF-based composites in removing heavy metal ions.     

An unexpected generation of magnetically separable Se/Fe3O4 for catalytic degradation of polyene contaminants with molecular oxygen

Selenization of Fe₂O₃ with NaHSe led to Se/Fe₃O₄. The unexpected generation of Fe₃O₄ attributed to the reduction conditions of the reaction, and the resulted magnetic features of the material facilitated its separation in practical applications. Owning to the synergistic effect of Se with Fe, the material was especially active to catalyze the oxidative C=C scission using O₂ as mild oxidant. The technique has been successfully applied in polyene degradation project, which is of profound practical values for the treatment of the polyene pigment pollution and may be applied in the food and pharmaceutical industry.     

Cost‐efficient magnetic nanoporous carbon derived from citrus peel for the selective adsorption of seven insecticides

A magnetic solid‐phase extraction adsorbent that consisted of citrus peel‐derived nanoporous carbon and silica‐coated Fe₃O₄ microspheres (C/SiO₂@Fe₃O₄) was successfully fabricated by co‐precipitation. As a modifier for magnetic microspheres, citrus peel‐derived nanoporous carbon was not only economical and renewable for its raw material, but exerted enormous nanosized pore structure, which could directly influence the type of adsorbed analytes. The C/SiO₂@Fe₃O₄ also possessed the advantages of Fe₃O₄ microspheres like superparamagnetism, which could be easily separated magnetically after adsorption. Integrating the superior of biomass‐derived nanoporous carbon and Fe₃O₄ microspheres, the as‐prepared C/SiO₂@Fe₃O₄ showed high extraction efficiency for target analytes. The obtained material was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and the Brunauer–Emmett–Teller method, which demonstrated that C/SiO₂@Fe₃O₄ was successfully synthesized. Under the optimal conditions, the adsorbent was selected for the selective adsorption of seven insecticides before gas chromatography with mass spectrometry detection, and good linearity was obtained in the concentration range of 2–200 μg/kg with the correlation coefficient ranging from 0.9952 to 0.9997. The limits of detection were in the range of 0.03–0.39 μg/kg. The proposed method has been successfully applied to the enrichment and detection of seven insecticides in real vegetable samples.     

Synergistic Ternary Composite (Carbon/Fe3O4@Graphene) with Hollow Microspherical and Robust Structure for Li‐Ion Storage

The electrode materials with hollow structure and/or graphene coating are expected to exhibit outstanding electrochemical performances in energy‐storage systems. 2D graphene‐wrapped hollow C/Fe₃O₄ microspheres are rationally designed and fabricated by a novel facile and scalable strategy. The core@double‐shell structure SPS@FeOOH@GO (SPS: sulfonated polystyrene, GO: graphene oxide) microspheres are first prepared through a simple one‐pot approach and then transformed into C/Fe₃O₄@G (G: graphene) after calcination at 500 °C in Ar. During calcination, the Kirkendall effect resulting from the diffusion/reaction of SPS‐derived carbon and FeOOH leads to the formation of hollow structure carbon with Fe₃O₄ nanoparticles embedded in it. In the rationally constructed architecture of C/Fe₃O₄@G, the strongly coupled C/Fe₃O₄ hollow microspheres are further anchored onto 2D graphene networks, achieving a strong synergetic effect between carbon, Fe₃O₄, and graphene. As an anode material of Li‐ion batteries (LIBs), C/Fe₃O₄@G manifests a high reversible capacity, excellent rate behavior, and outstanding long‐term cycling performance (1208 mAh g^?1 after 200 cycles at 100 mA g^?1).     

Studies on a New Material for Hydrogen Storage and Supply by Modified Fe and Fe2O3 Powder

Modified iron oxide, a new material for hydrogen storage and supply to polymer electrolyte fuel cell （PEFC）, was prepared by impregnating Fe or Fe2O3 powder with an aqueous solution containing metal cation additives （Al, Cr, Ni, Co, Zr and Mo）. Hydrogen storage properties of the samples were investigated. The results show that both Fe and Fe2O3 powder with additive Mo presented excellent catalytic activity and cyclic stability, and their hydrogen producing temperature could be surprisingly decreased. The temperature of forming hydrogen for the Fe2O3-Mo at the rate of 250 μmol·min^-1·Fe-g^-1 could be dramatically decreased from 527 ℃ before addition of Mo to 283 ℃ after addition of Mo in the fourth cycle. The cause for it was probably related to preventing the sinter of the sample particles. In addition, hydrogen storage capacity of the Fe2O3-Mo can reach w=4.5% （72 kg H2/m^3）, close to International Energy Agency （IEA） criterion. These show the value of practical application of the Fe2O3-Mo as the promising hydrogen storage material.     

High rate capability of Fe/FeO/Fe3O4 composite as anode material for lithium-ion batteries

Fe/FeO/Fe₃O₄ composite was synthesized by a simple solid method using ferric citrate and phenolic resin as raw materials. The reaction processes of raw materials mixture were characterized by thermogravimetric analysis (TGA) under nitrogen. X-Ray diffraction (XRD) and scanning electron microscopy (SEM) were used to investigate the structure and morphology of the products. The results showed that the obtained material was octahedral Fe/FeO/Fe₃O₄ composite with a size of 2-4 μm. The electrochemical performances of Fe/FeO/Fe₃O₄ composite as anode material were also evaluated, which exhibited a stable specific capacity of 260.3 mAh g^-1 and an ideal initial coulombic efficiency of 90.8% in the range of 0.05~3 V at the 5C rate. A good rate capacity of Fe/FeO/Fe₃O₄ composite electrode was also shown by the charge-discharge testing even at the rate of 60C. The better rate capability of Fe/FeO/Fe₃O₄ electrode could be measured in higher temperature.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.     

Surface Characterization and the Gas Response of a Mixed,Fe2O3?Fe2(MoO4)3, Oxide to Low Concentrations of H2S in Air

The preparation and H₂S sensing potential of thick‐films of a mixed oxide, Fe₂O₃? Fe₂(MoO₄)₃, were investigated. A Fourier‐transform infrared (FTIR) study confirmed the existence of sulfur species at the surface after the interaction of H₂S gas with the mixed oxide. The starting material, β‐FeMoO₄, was synthesized by a solvothermal method, followed by supercritical drying. Heat treatment of this material (oxidation) above 500 °C resulted in the formation of Fe₂O₃? Fe₂(MoO₄)₃ mixed oxide, where Fe₂O₃ was a by‐product. An increase in the conductivity of the films in the presence of H₂S gas (concentration range 1–20 ppm in air) was observed with the simultaneous formation of water and sulfide ions at 225 °C. An improvement of the H₂S sensing potential is obtained, using an intermediate short heat treatment at higher temperature (500 °C) in the beginning of recovery (desorption) phase. This intermediate high temperature, used before every expected exposure to H₂S gas, may contribute the formation of an initial surface coverage of O^2?.     

Assembly of a Nanoreactor System with Confined Magnetite Core and Shell for Enhanced Fenton‐Like Catalysis

Conventional solid catalysts for heterogeneous Fenton‐like reactions in bulk solution usually suffer from aggregation and vulnerability, which greatly lower the catalytic efficiency and hamper their practical application. Herein, we demonstrate a promising yolk–shell nanostructure with both the core and the shell composed of magnetite (designated as yolk‐like Fe₃O₄@Fe₃O₄/C) as a nanoreactor capable of accommodating the Fenton‐like reaction into its void space. Benefiting from the mesoporous shell and perfect interior cavity of this composite, reactants can access and be abundantly confined within the microenvironment where Fe₃O₄ sites are dispersed on the entire cavity surfaces, thus leading to a higher catalytic efficiency compared with the conventional solid catalysts in bulk solution. The chosen model reaction of chlorophenols degradation in the presence of the as‐prepared materials as well as hydrogen peroxide (H₂O₂) confirms this assumption. Under the optimal reaction conditions, more than 97 % 4‐chlorophenol (4‐CP) can be degraded in the Fe₃O₄@Fe₃O₄/C nanoreactor, whereas only 28 % can be achieved by using bare Fe₃O₄ particles within 60 min. Furthermore, owing to the existence of the outermost carbon layer and high‐magnetization properties, the nanoreactor can be re‐used for several runs. The synthesized nanoreactor displays superior catalytic activity toward the Fenton‐like reaction compared with the bare solid catalysts, and thereby holds significant potential for practical application in environmental remediation.     

Influence of mechanical activation time,annealing, and Fe/O ratio on Fe3O4/Fe composites formation from Fe2O3 and Fe powders mixture

Commercially, iron (α-Fe) and hematite (α-Fe₂O₃) powders were used for the synthesis of composite powders of Fe₂O₃/Fe type by mechanical milling. Several ratios of Fe₂O₃/Fe were chosen for the composite synthesis; the atomic percent of oxygen in the starting mixtures ranged from 21 to 46 %. The Fe₂O₃/Fe composite samples with various Fe/O ratios were milled for different milling times. The milled composite samples were subjected to the heat treatments in argon up to 900 °C. During the heat treatment at temperatures that do not exceed 550 °C, Fe₃O₄/Fe composite particles are formed by the reaction between the Fe₂O₃ and Fe. Further increase of the heat treatment up to 700 °C leads to the reaction of the Fe₃O₄/Fe composite component phases, resulting thus in the formation of FeO/Fe composite. The heat treatment up to 900 °C of the Fe₂O₃/Fe leads to the formation of a composite of FeO/Fe₃O₄/Fe independent of the milling time and Fe₂O₃/Fe ratios. The onset temperatures of the Fe₃O₄ and FeO formations decrease upon increasing the milling time. Another important aspect is that, in the case of the same milling time but with a large amount of iron into the composite powder the formations temperatures of Fe₃O₄ and FeO are also decreasing. The influence of the mechanical activation time, heat treatment temperature, and Fe/O ratio on the formation of the (Fe₃O₄, FeO)/Fe composite from Fe₂O₃+Fe precursor mixtures was studied by differential scanning calorimetry and X-ray diffraction techniques.     

Fe3O4@chitosan-bound boric acid composite as pH-responsive reusable adsorbent for selective recognition and capture of cis-diol-containing shikimic acid

Recently, shikimic acid (SA) has aroused great concern as the starting raw material for the synthesis of antiviral drug (Tamiflu) against the spread of influenza virus in the body. In this work, magnetic chitosan composite modified with boric acid and its application in SA recognition and separation was described. Chitosan (CT) with plenty of hydroxyl and amino groups was first coated on the surface of magnetic core Fe₃O₄, then carboxylic groups were grafted to the surface of Fe₃O₄@CT via anhydride modification, followed by the introduction of 3-aminophenylboronic acid (APBA). The uniform morphology and composition analysis of the adsorbent (Fe₃O₄@CT-COOH-BA) were characterized by FT-IR, XRD, XPS, SEM, TEM and UV–visible spectroscopy. The adsorption capacity of as-prepared material was explored in detail by batch mode experiments. The adsorption kinetics fitted well with a pseudo-second order model, and the adsorption isotherms was well described by the Langmuir model with a maximum adsorption capacity of 23.8 mg g⁻¹ at 25 °C. Solution pH plays a crucial role in adsorption process and the optimized pH was 8.0. In addition, Fe₃O₄@CT-COOH-BA could be easily reused through an external magnet and the adsorption capacity reduced by only 4% after five adsorption–desorption cycles. These results prove that boric acid modified magnetic chitosan composite is an effective and practical adsorbent for specific recognition and selective adsorption of cis-diol-containing compounds.     

Ordered mesoporous Pt/Fe3O4–CeO2 heterostructure gel particles with enhanced catalytic performance for the reduction of 4-nitrophenol

The unique physicochemical properties of ordered mesoporous transition metal oxides have attracted more and more attention. The hydrolysis process of metal oxide precursors is difficult to control, and it is difficult to synthesize an ordered mesoporous transition metal oxide material using the conventional template method. Ordered mesoporous Pt/Fe₃O₄–CeO₂ heterostructure gel materials with excellent catalytic properties were successfully prepared using aerogel technology and the chemical deposition method. The Pt/Fe₃O₄–CeO₂ material was an n–n combined heterostructured semiconductor material which consisted of a magnetic Fe₃O₄ layer, a CeO₂ core and Pt noble metal doped nanoparticles. A layer of Fe₃O₄ thin film was formed on the surface of ordered mesoporous Pt/CeO₂ gel matrix material using the chemical deposition method. The intriguing heterostructural features could facilitate reactant diffusion and exposure of active sites which could enhance synergistic catalytic effects between the Pt nanoparticles and CeO₂ nanoparticles. Compared with Pt/CeO₂, the prepared Pt/Fe₃O₄–CeO₂ showed enhanced catalytic activity in the reduction of 4-nitrophenol at room temperature. The catalytic activity of the heterostructure catalysts was systematically investigated using 4-nitrophenol reduction as a model reaction. The results showed that the Pt (0.1%)/Fe₃O₄–CeO₂ sample exhibited the optimal catalytic performance toward catalytic reduction of 4-nitrophenol to 4-aminophenol. The study provided a method for the preparation of heterostructure nanocatalysts with high efficiency, which would be effective for application in various catalytic reactions.     

Kinetics of reduction of iron oxides by H2: Part II. Low temperature reduction of magnetite

This study deals with the reduction of Fe₃O₄ by H₂ in the temperature range of 210-950 °C. Two samples of Fe₃O₄ produced at 600 and 1200 °C, designated as Fe₃O₄₍₆₀₀₎ and Fe₃O_4(1200), have been used as starting material.Reduction of Fe₃O₄₍₆₀₀₎ by H₂ is characterized by an apparent activation energy ‘E_a’ of 200, 71 and 44 kJ/mol at T < 250 °C, 250 °C < T < 390 °C and T > 390 °C, respectively. The important change of E_a at 250 °C could be attributed to the removal of hydroxyl group and/or point defects of magnetite. This is confirmed during the reduction of Fe₃O_4(1200). While transition at T ≈ 390 °C is probably due to sintering of the reaction products as revealed by SEM.In situ X-rays diffraction reduction experiments confirm the formation of stoichiometric FeO between 390 and 570 °C. At higher temperatures, non-stoichiometric wüstite is the intermediate product of the reduction of Fe₃O₄ to Fe.The physical and chemical modifications of the reduction products at about 400 °C, had been confirmed by the reduction of Fe₃O₄₍₆₀₀₎ by CO and that of Fe₃O_4(1200) by H₂. A minimum reaction rate had been observed during the reduction of Fe₃O_4(1200) at about 760 °C. Mathematical modeling of experimental data suggests that the reaction rate is controlled by diffusion and SEM observations confirm the sintering of the reaction products.Finally, one may underline that the rate of reduction of Fe₃O₄ with H₂ is systematically higher than that obtained by CO in the explored temperature range.     

Preparation of novel magnetic fluorescent microspheres from copperas and fluorescence enhancement with zinc ions

The aim of this study is to develop a new method for the preparation of Fe₃O₄@SiO₂–An NPs from copperas. The core–shell structures of the nanoparticles and chemical composition have been confirmed by TEM, XRD and FTIR techniques. Fluorescence Enhancement of Fe₃O₄@SiO₂–An NPs with zinc ions was investigated by fluorescence emission spectra. The results indicated that the Fe₃O₄ NPs with a high purity (Total Fe 72.16 %) were obtained from copperas by chemical co-precipitation method and have a uniform spherical morphology with an average diameter of about 10 nm. The Fe₃O₄ NPs coated with silica nanoparticles were prepared, and an attempt had been made that the Fe₃O₄@SiO₂ NPs were modified by 3-aminopropyltriethoxysilane and 9-anthranone successively. The recommended mole ratio of ethanol to water and the content of ammonia water added were 4:1 and 25 wt% respectively, which have an obviously effect on the combination of the final well-ordered MNPs with the amino functionalities and reactant components. The functionalized Fe₃O₄@SiO₂–An NPs have a fluorescence property and this fluorescence effect can be enhanced with the Zn²⁺ ions attachment. Meanwhile, the saturated magnetization of Fe₃O₄@SiO₂–An NPs was 37.8 emug^?1 at 25 °C and this fluorescent material exhibited excellent magnetic properties. A new way was therefore provided for the comprehensive utilization of the unmarketable copperas. Moreover, the functionalized Fe₃O₄@SiO₂–An NPs have a big potential in environmental decontamination, medical technology and biological science.     

Fe3O4/Graphene Composite Anode Material for Fast-Charging Li-Ion Batteries

Composite anode material based on Fe₃O₄ and reduced graphene oxide is prepared by base-catalysed co-precipitation and sonochemical dispersion. Structural and morphological characterizations demonstrate an effective and homogeneous embedding of Fe₃O₄ nanoparticles in the carbonaceous matrix. Electrochemical characterization highlights specific capacities higher than 1000 mAh g⁻¹ at 1C, while a capacity of 980 mAhg⁻¹ is retained at 4C, with outstanding cycling stability. These results demonstrate a synergistic effect by nanosize morphology of Fe₃O₄ and inter-particle conductivity of graphene nanosheets, which also contribute to enhancing the mechanical and cycling stability of the electrode. The outstanding capacity delivered at high rates suggests a possible application of the anode material for high-power systems.     

In situ electrochemical contact angle study of hemoglobin and hemoglobin–Fe3O4 nanocomposites

The electrochemical redox-induced contact angle changes of hemoglobin droplets in the absence and presence of tetraheptylammonium-capped Fe₃O₄ nanoparticles have been explored by using in situ electrochemical contact angle measurements. The results indicate that the electrochemical redox process may lead to some structure changes of hemoglobin (Hb), which could further induce the hydrophobic-to-hydrophilic changes of the relative droplets. Our observations demonstrate that hemoglobin could self-assemble on the surface of the functionalized Fe₃O₄ nanoparticles as Hb–Fe₃O₄ nanocomposites, which may contribute to much more significant change of the electrochemical redox-induced contact angle values than that with free nano-Fe₃O₄. These results suggest that in situ electrochemical contact angle measurements could be readily applied as a new and convenient method to detect some specific biological process. Figure Schematic drawing of the possible process and contact angle changes for the self-assembly of hemoglobin on the tetraheptylammonium-capped Fe₃O₄ nanoparticles Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

The novel composite material MOF-[Mg3(BTC)2]/GO/Fe3O4 and its use in slow-release ibuprofen

This study aimed to synthesize a composite material consisting of metal–organic framework based magnesium(II) and benzene-1,3,5-tricarboxylic acid (H₃BTC) and its modification using graphene oxide (GO) and Fe₃O₄. The obtained material (i.e., [Mg₃(BTC)₂]/GO/Fe₃O₄) was studied as a matrix for the slow release of ibuprofen. [Mg₃(BTC)₂]/GO/Fe₃O₄ matrices were synthesized ex situ with the sonochemical method (material 1) and in situ with the solvothermal method (material 2). The obtained materials were completely characterized by X-ray diffraction and Fourier-transform infrared spectroscopy. Based on scanning electron microscopy imaging, the produced materials were spherical. The presence of GO and Fe₃O₄ in material 1 and material 2 reduced the surface area, but it increased the adsorption capacity of ibuprofen up to 94.12%. The magnetic properties of materials 1 and 2 were observed using a vibrating sample magnetometer. These results demonstrate that modification of Fe₃O₄ nanoparticles induces paramagnetic properties in both materials. The presence of this matrix material was able to release ibuprofen up to seven times slower at pH 5.0 and 12 times slower at pH 7.4. An increase in the pH lead to an increase in the concentration of ibuprofen released to 33.31% more than at pH 5.0.     

α‐Fe2O3 Cubes with High Visible‐Light‐Activated Photoelectrochemical Activity towards Glucose: Hydrothermal Synthesis Assisted by a Hydrophobic Ionic Liquid

A liquid/liquid interfacial reaction system was designed to fabricate α‐Fe₂O₃ cubes. The reaction system uses a hydrophobic ionic liquid containing iron ions ([(C₈H₁₇)₂(CH₃)₂N]FeCl₄) for manufacturing α‐Fe₂O₃ cubes by a novel and environmentally friendly hydrothermal method under low‐temperature conditions (140 °C). The iron‐containing ionic liquid is hydrophobic and can form a liquid/liquid interface with water, which is vital for fabrication of the α‐Fe₂O₃ cubes. Nanomaterials synthesized from hydrophobic iron‐containing ionic liquids show good crystallinity, well‐developed morphology, and uniform size. The effect of different ionic liquids on the morphology of α‐Fe₂O₃ was investigated in detail. [(C₈H₁₇)₂(CH₃)₂N]FeCl₄ is assumed to perform the triple role of forming a liquid/liquid interface with water and acting as reactant and template at the same time. The effect of the reaction temperature on the formation of the α‐Fe₂O₃ cubes was also studied. Temperatures lower or higher than 140 °C are not conducive to formation of the α‐Fe₂O₃ cubes. Their photoelectrochemical properties were tested by means of the transient photocurrent response of electrodes modified with as‐prepared α‐Fe₂O₃ cubes. The photocurrent response of an α‐Fe₂O₃ cubes/indium tin oxide electrode is high and stable, and it shows great promise as a photoelectrochemical glucose sensor with high sensitivity and fast response, which are beneficial to practical applications of nanosensors.     

Fe3O4修饰的Pt-Ru/C纳米催化剂的制备及其在无溶剂条件下邻氯硝基苯选择性加氢的催化性能

采用浸渍法制备了一系列Pt/Ru质量比不同的Fe₃O₄修饰的Pt-Ru/Fe₃O₄/C催化剂, 运用透射电镜(TEM)、能量弥散X射线谱(EDX)、X射线光电子能谱(XPS)、X射线粉末衍射(XRD)等手段对Pt-Ru/Fe₃O₄/C一系列催化剂进行了表征, 并考察了Pt/Ru质量比不同对催化剂Pt-Ru/Fe₃O₄/C在无溶剂条件下催化邻氯硝基苯(o-CNB)选择性加氢制备邻氯苯胺(o-CAN)催化性能的影响. 研究结果表明, 催化剂的催化活性和对目标产物的选择性跟活性组分Pt、Ru比例有关. 随着Pt/Ru比例的减小, 目标产物o-CAN的选择性有所升高, 然而反应物o-CNB的转化率有所下降. 当Pt/Ru的质量比为2时, o-CNB的转化率降为76.5%, 而目标产物o-CAN的选择性仍然为100%. 与此同时, 我们还对Pt-Ru/Fe₃O₄/C催化剂高的催化活性和目标产物的高选择性可能的原因进行了分析.