HMX和HMX/HTPB PBX的晶体缺陷理论研究

建立空位和掺杂点缺陷模型, 用分子动力学(MD)方法, 研究晶体缺陷对β-环四亚甲基硝胺(HMX)和β-HMX/HTPB(端羟基聚丁二烯)高聚物粘结炸药(PBX)的力学性能和爆炸性能的影响. 结果表明, 相对于HMX“完美”晶体(1)考察缺陷晶体(2和3), 以及相对于HMX完美晶体基PBX(1)考察缺陷PBX 2和PBX 3, 均发现弹性系数和(拉伸、体积、剪切)模量下降, 导致体系刚性减弱, 延展性和韧性增强. 这与在基炸药HMX晶体(1, 2和3)中分别加入HTPB高聚物粘结剂形成PBX 1, PBX 2和PBX 3呈现类似的相应的变化趋势和效果. 此外, 研究表明, 爆炸性质也依赖于体系的组成和结构. 因加入的是低能高聚物, 故PBX(1), PBX(2)和PBX(3)的爆热、爆速和爆压均比相应的基炸药(1, 2和3)低, 即晶体(1)＞PBX(1), 晶体(2)＞PBX(2), 晶体(3)＞PBX(3). PBX(1), PBX(2), PBX(3)与对应基炸药(1, 2, 3)的爆速和爆压取相同变化次序, 亦即PBX(1)＞PBX(2)＞PBX(3)对应于晶体(1)＞晶体(2)＞晶体(3). 这些计算结果和规律对PBX配方设计显然具有指导作用.     

混合溶剂对β-HMX结晶形貌影响的分子动力学模拟（英文）

为了解释混合溶剂对β-HMX结晶形貌的影响,采用分子动力学方法系统地研究了β-HMX晶体表面与混合溶剂(丙酮/γ-丁内酯和二甲基甲酰胺/水)的相互作用,体积比从1:3到3:1。使用修正的附着能模型预测了β-HMX在混合溶剂中的生长习性。结果表明:β-HMX晶体的(020)面与溶剂分子的相互作用最弱,混合溶剂对β-HMX不同晶面的作用变化,可以显著地改变β-HMX的晶体形态。通过比较β-HMX在不同体积比混合溶剂作用下结晶形貌的纵横比,发现混合溶剂为二甲基甲酰胺/水,其体积比为1:3时,有利于β-HMX晶体球形化。     

分子动力学模拟浓度和温度对TATB/PCTFE PBX力学性能的影响

为探讨高聚物粘结炸药(Polymer Bonded Explosive, PBX)的力学性能随温度和高聚物浓度而变化的规律, 用分子动力学(MD)方法和compass力场, 对著名高能炸药1,3,5-三氨基-2,4,6-三硝基苯(TATB)与常用高聚物粘结剂聚三氟氯乙烯(PCTFE)所构成的TATB/PCTFE PBX进行模拟计算. 结果表明, 在一定范围内, 随高聚物浓度的增加, PBX的弹性系数和模量减小, 表明其刚性减小、弹性增加; 而随温度的升高, PBX的刚性减小、弹性增强. 还发现PBX的结合能随浓度增高而增大, 随温度升高而减小.     

CL-20/HMX共晶及其为基PBX界面作用和力学性能的MD模拟研究

为提高共晶炸药的实际使用价值, 改善其安全性和力学性能, 以CL-20/HMX共晶炸药为基, 分别添加2种高聚物粘结剂Estane 5703(聚氨基甲酸乙酯)和HTPB(端羟基聚丁二烯), 共构建两种共晶基高聚物粘结炸药(PBX)模型, 进行细致的295 K NPT分子动力学(MD)模拟研究. 通过两种PBX模型及其与该共晶炸药的MD模拟结果比较表明, 与基炸药之间的结合能Estane 5703大于HTPB, 预示含少量Estane 5703的PBX稳定性和相容性更佳; 对相关函数g(r)揭示粘结剂与基炸药界面相互作用的方式, 以基炸药中H分别与Estane 5703中羰基O和HTPB中端羟基O之间的氢键较强. 与CL-20/HMX共晶炸药相比, 少量粘结剂Estane 5703或HTPB的加入, 使弹性系数C_ij下降, 拉伸模量(E)、体积模量(K)和剪切模量(G)均显著减小, 而泊松比(ν), 柯西压(C₁₂－C₄₄)和K/G值明显增大, 表明PBXs体系刚性减小, 延展性增强, 力学性能大为改善. 少量粘结剂包覆使PBXs致钝, 主要归因于其隔热、吸热并使体系变“软”的缓冲作用, 而界面作用造成的分子结构引发键键长变化变为次要因素.     

PETN基PBX结合能和力学性能的理论研究

PETN(季戊四醇四硝酸酯)是著名的硝酸酯类猛炸药,用量子力学(QM)、分子力学(MM)和分子动力学(MD)方法,计算模拟其与高聚物组成的PBX(高聚物粘结炸药)的结合能和力学性能.以AM1-MO法和MM方法取PETN与系列高聚物的尺寸匹配原子簇模型,经几何全优化计算,发现两种方法求得的结合能彼此线性相关.对PETN超晶胞及其与系列氟聚物组成的双组分PBX,实施COMPASS力场下的分子动力学(MD)周期性模拟,求得其弹性系数、拉伸模量、体模量、剪切模量和泊松比,发现添加少量高聚物确能有效改善炸药的力学性能.     

β-HMX晶体结构及其性质的高水平计算研究

对β-HMX晶体进行DFT-B3LYP/6-31G计算研究，求得其能带结构和电子结构，探讨了结构-性能关系。从带隙约为5.7eV推知HMX晶体为绝缘体，计算所得晶格间相互作用能为149.29kJ.mol^-^1；计算的升华热(154.08kJ.mol^-^1)与实验值相符。晶体中相邻分子的硝基氧之间点电荷静电势要高，表明该处晶格易于断裂、并可能成为冲击引爆中心。从原子间距和原子间重叠布居分析，发现β-HMX分子之间存在微弱的氢键；环外以硝胺键较强，环内以N-C键较弱，预示该二部位易于引发分解和起爆。     

TATB基PBX结合能和力学性能的理论研究

以SCF-MO-AM1方法和MM-COMPASS力场, 对TATB (1,3,5-三氨基-2,4,6-三硝基苯)与系列高聚物组成的PBX(高聚物粘结炸药)尺寸匹配原子簇, 分别进行全优化几何构型计算, 发现两种方法求得的结合能存在良好的线性关系. 对TATB (3×3×4)超晶胞及其与系列氟聚物组成的双组分PBX, 实施COMPASS力场下的分子动力学(MD)周期性模拟计算, 首次求得其弹性系数、模量和泊松比, 发现添加少量高聚物即能有效改善炸药的力学性能.     

CL-20/TNT共晶炸药的分子动力学研究

运用分子动力学(MD)方法,选择凝聚态分子势能优化力场(COMPASS),对六硝基六氮杂异伍兹烷(ε-CL-20)、2,4,6-三硝基甲苯(TNT)晶体及其等摩尔比的CL-20/TNT混合炸药和共晶炸药进行不同温度下恒定粒子数等压等温(NPT)系综模拟研究.结果表明,CL-20/TNT共晶的内聚能密度(CED)和结合能随温度的升高逐渐减小;共晶的CED比混合炸药的大,结合能是混合炸药的2倍多,预示其稳定性明显增强.对相关函数和局部放大结构显示共晶中组分分子间作用主要来自TNT中H和CL-20中O以及CL-20中H和TNT中O之间形成的氢键.通过波动法求得的弹性力学性能结果表明,CL-20/TNT共晶的拉伸模量(E)、体积模量(K)和剪切模量(G)介于ε-CL-20和TNT晶体之间,且随温度的升高而下降,符合一般预期;但共晶炸药的柯西压(C12-C44,Cij弹性系数)、K/G和泊松比(ν)均比其组分炸药ε-CL-20和TNT高得多,预示该共晶具有异常高的延展性和弹性伸长,主要是二组分呈层状交替排列且之间存在较强相互作用所致.     

萘磺酸盐与β环糊精衍生物的包结行为

以自组装方式在石英晶体谐振器的金电极表面修饰末端含巯基的β环糊精衍生物(βCDd),用石英晶体微天平(QCM)在线监测α、β萘磺酸盐与之发生包结反应的过程,探讨了温度、浓度、取代基位置对包结反应稳定常数Kin和速率常数ka的影响.从理论上推导并通过实验验证了Kin和ka所遵从的关系式.结果表明:所形成的包结配合物中βCDd与萘磺酸盐的化学计量均为1:1;包结配位反应过程符合Langmuir吸附模型;取代基在萘环上的位置对Kin和ka有很大影响,说明不同取代位置的萘磺酸盐与βCDd的包结行为存在明显差异.     

氮化硅新相P6和P6＇的理论研究：一种研究陶瓷材料的新工具

在原子尺度上构建模型,采用密度泛函理论结合准谐波近似研究了氮化硅新相（P6和P6＇相）的点阵常数、弹性常数和弹性模量. 并使用β-Si3N4作基准材料来测试计算结果的准确性. 研究发现β-Si3N4的晶胞常数和弹性常数与实验值吻合相当好. 研究了P6和P6＇相在30～55 GPa的各向异性因子、脆性和力学稳定性,结果表明两相属于金属性和脆性材料,且晶体的脆性和各向异性都随着压强的升高而增大. β相在40 GPa和300 K时会转变成P6＇相. 当压强继续升高到53．2GPa时,P6＇相又转化成δ相．同时研究了氮化硅的热容、体积和体模量等性质随温度的变化规律．     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.