Sensitive voltammetric determination of xanthinol nicotinate at a carbon nanotubes-ionic liquid gel modified electrode

The electrochemistry of xanthinol nicotinate(Xan) was studied by cyclic voltammetry at a glassy carbon electrode modified by a gel containing multi-walled carbon nanotubes(MWNTs) and room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate(BMTMPF_6).The modified electrode exhibited good promotion to the electrochemical oxidation of Xan and an ultrasensitive electrochemical method was proposed for the determination of Xan.This method was successfully applied to the determination of...     

Kinetic spectrophotometric method for the determination of selenium(IV) by its catalytic effect on the reduction of spadns by sulphide in micellar media

A simple kinetic spectrophotometric method was developed for the determination of ultratrace amounts of Se(IV). The method is based on the reduction of spadns by sulphide in micellar media. The reaction was monitored spectrophotometrically by measuring the decrease in the absorbance of spadns at 515 nm with a fixed-time method. The decrease in the absorbance of spadns is proportional to the concentration of Se(IV) in the range 0.5–100 ng/mL with a fixed time of 2.5–7.0 min from the initiation of the reaction. The limit of detection is 0.3 ng/mL Se(IV). The relative standard deviation for the determination of 0.02 and 0.10 μg/mL Se(IV) was 2.10 and 1.95%, respectively. The method was applied to the determination of Se(IV) in water. The text was submitted by the authors in English.     

A simple method to fabricate a Prussian Blue nanoparticles/carbon nanotubes/poly(1,2-diaminobenzene) based glucose biosensor

A novel Prussian Blue nanoparticles/carbon nanotubes/poly(1,2-diaminobenzene) based glucose biosensor was fabricated by a simple and fast method. Firstly, the Prussian Blue (PB) nanoparticles were direct electrodeposited onto the surface of a glassy carbon electrode modified with multiwall carbon nanotubes (MWNTs) in a short time. Then an ultrathin conducting poly(1,2-diaminobenzene) film was electrodeposited onto the surface of PB/MWNTs nanocomposite to immobilize the glucose oxidase via glutaraldehyde cross-linking. The experiments results showed that the stability of the PB nanoparticles was greatly improved by the MWNTs and the PB/MWNTs nanocomposite exhibited an excellent synergistic electrocatalytic effect toward reduction of hydrogen peroxide. The biosensor showed excellent performances toward determination of glucose. The linear range of the glucose biosensor is from 10 μM to 2.5 mM, with a detection limit of about 5 μM. The response is within less than 5 sec. Correspondence: Wanzhi Wei, State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Hunan, Changsha 410082, P.R. China     

阿莫西林与维多利亚蓝B的显色反应及应用

The color reaction of amoxicillin with victoria blue B was studied.A novel visible spectrophotometric method for the determination of amoxicillin has been established.Under pH 8.50～10.5 condition,victoria blue B reacteds with amoxicillin to form red ion association complex.The maximum absorption wavelength was at 630nm and the apparent molar absorptivity(ε) was 2.67×10~4 L·mol~(-1)·cm~(-1) and the linear ranges was 0～5.5 mg·L~(-1).Amoxicillin obey Beer's law in definite concentration range.The optimum reaction conditions and the methodological precision were studied simultaneity.The method was simple and rapid and sensitive for the determination of amoxicillin.This method has been applied to the determination of amoxicillin is in the city sell amoxicillin medicament is in point and average recovery at 98.2%～101.0%.     

Trace determination of cobalt ion by using malic acid-malonic acid double substrate oscillating chemical system

A novel kinetic method for determination of trace amounts of cobalt ion was proposed and validated. The method is based on adding malic acid into classical Belousov-Zhabotinskii （B-Z） oscillating chemical system to form a double substrate one. The results showed that when the concentration of cobalt ion was in the range of 5.27× 10^-8 to 5.37 × 10^-12 mol L^-1, the change of the oscillating period was directly proportional to the negative logarithm of cobalt ion concentration. The sensitivity and precision of the developed method were quite satisfactory. The limit of detection was down to 5.20 × 10^-13 mol L^-1 which was a highest sensitivity found for determination of metal ions using oscillating chemical reaction so far. Some factors influencing the determination were also examined. The method has been successfully used to determine cobalt ion in vitamin B12 injection.     

在色氨酸存在下利用多壁碳纳米管糊电极和萘酚介质构成的伏安传感器测定N-乙酰半胱氨酸(英文)

A multiwall carbon nanotube modified electrode prepared by incorporating multiwall carbon nanotubes in the electrode of a sensor and naphthol green as a homogeneous mediator was used as a voltammetric sensor for the determination of N‐actylcysteine(N‐AC) in the presence of trypto-phan(Trp). The voltammograms of differential pulse voltammetry of N‐AC in a mixture with Trp were separated from each other by a potential difference of 200 mV, which allowed the determina-tion of both N‐AC and Trp simultaneously. Under the optimum conditions, the electrocatalytic cur-rents increased linearly with N‐AC concentration in the range of 0.25–400 μmol/L(two linear seg-ments with different slopes). The detection limit for N‐AC was 0.08 μmol/L. The kinetic parameters of the system were determined using electrochemical methods. The method was applied for the determination of N‐AC in drug and urine samples.     

Catalytic Kinetic Spectrophotometric Method for Determination of Phosphate Ion

The kinetic method for the determination of phosphate microamounts was described. The developed method is based on catalytic effect of phosphate on sodium pyrogallol-5-sulphonate （PS） by dissolved oxygen. The reaction was followed spectrophotometrically by measuring the rate of change in the values of the absorbance of the oxidation product at 437 nm. The optimum reaction conditions are PS （0.44×10^-3 mol·L^-1） and HClO4 （3.6×10^-6 mol·L^-1） at 25 ℃. Following this procedure, phosphate can be determined with a linear calibration graph up to 0.23 μg·mL^-1. The interference effect of several species was also investigated and it was found that the most common cations and anions did not interfere with the determination. The developed procedure was successfully applied to the determination of phosphate in natural waters and soil.     

Determination of captopril in pharmaceutical preparation and biological fluids using two- and three-way chemometrics methods

Spectrophotometric method has been developed for the direct quantitative determination of captopril in pharmaceuticalpreparation and biological fluids(human plasma and urine)samples.The method was accomplished based on parallel factoranalysis(PARAFAC)and partial least squares(PLS).The study was carried out in the pH range from 2.0 to 12.8 and with aconcentration from 0.70 to 61.50 μg mL~(-1)of captopril.Multivariate calibration models such as PLS at various pH and PARAFACwere elaborated from ultraviolet spectra deconvolution and captopril determination.The best models for this system were obtainedwith PARAFAC and PLS at pH 2.0.The applications of the method for determination of real samples were evaluated by analysis ofcaptopril in pharmaceutical preparations and biological fluids with satisfactory results.The accuracy of the method,evaluatedthrough the RMSEP,was 0.5801 for captopril with best calibration curve by PARAFAC and 0.6168 for captopril with PLS at pH 2.0model.     

Analysis of Vitamin K3 by a Fluorescent Spectroelectrochemistry Method

A simple and sensitive spectroelectrochemistry method for the determination of vitamin K 3 was developed by combining electrolysis and fluoremetry. This method was based on that vitamin K 3 was reduced at a glassy carbon electrode, and its product with characteristic fluorescence at 420 nm was determined with excitation wavelength at 309 nm. Under optimized electrochemical reaction conditions and fluorescent experiment parameters, the fluores-cence intensity was proportional to the concentration of vitamin K 3 in a range from 3.50×10 ?7 to 1.05×10 ?5 mol/L with a correlation coefficient of 0.9991, and detection limit was estimated to be 7.50×10 ?8 mol/L at a signal/noise ra-tio of 3. The relative standard deviation was less than 4.3%(n=5) and the recovery was in a range of 97%―105% for the determination of vitamin K 3 in pharmaceutical preparations. The result is satisfactory for the determination of vi-tamin K 3 as comparison to that from HPLC method.     

Homogeneous and nanomolar detection of hydrazine by indigocarmine as a mediator at the surface of TiO2 nanoparticles modified carbon paste electrode

The homogeneous electrocatalytic oxidation of hydrazine（HZ） has been studied by indigocarmine（IND） as a mediator at the surface of TiO₂ nanoparticles modified carbon paste electrode（TNMCPE）.Cyclic voltammetry was used to study the electrochemical behavior of IND at different scan rates.The voltammetric response of the modified electrode was linear against the concentration of HZ in the ranges of 3.0×l0^-8-7.0×10⁶ mol/L with differential pulse voltammetry method.The detection limit（3σ） was determined as 27.3 nmol/L.To evaluate the applicability of the proposed method to real samples,the modified CPE was applied to the determination of HZ in water samples.     

M3NS3, die ersten Nitridsulfide der Lanthanide (M = La?Nd,Sm)

M₃NS₃, the First Nitride Sulfides of the Lanthanides (M = La? Nd, Sm) . The oxidation of the “light” lanthanides (M = La? Nd, Sm) with equimolar amounts of sulfur in the presence of NaN₃ as nitrogen source results in the formation of the first lanthanide nitride sulfides: M₃NS₃ (evacuated silica vessels, some NaCl as flux, 850°C, 7 d). NaCl is afterwards removed from the not moisture sensitive crude product (faint- or orange-yellow to amber-co- loured transparent needles, oftenly intergrown to feltlike bunches) upon rinsing with water. The crystal structure was determined from X-ray single crystal data for the example of Sm₃NS₃ (orthorhombic, Pnma (no. 62), a = 1 201.18(7), b = 394.32(3), c = 1 285.27(6) pm, Z = 4, R = 0.027, R_w = 0.024), and M₃NS₃ (M = La? Nd) proved to be isostructural from Guinier powder data. There are three crystallographically different M³⁺ cations in six- (1 X) and sevenfold (2 X) coordination of the N^3? and S^2? anions. [(N^3?)(M³⁺)₄] tetrahedra connected via two corners forming linear chains [N(M1)_1/1(M2)_1/1(M3)_2/2] ⁶⁺ build up the main structural feature. Arranged in the manner of a closest packing of rods, they are held together by three crystallographically different S^2? which take care for charge neutrality and three-dimensional interconnection.     

Dy3+在Ba3La(BO3)3 中的光致发光

研究了Ba3La(BO3)3 基质中Dy3 的光致发光特性; 探讨了RE3 的电荷半径比(z/r)和Ce3 , Dy3 含量对Dy3 发光强度及发光颜色的影响; 分析了Ba3La(BO3)3 中Ce3 对Dy3 发光的敏化作用; 确定了Dy3 的 4F9/2→6H15/2及4F9/2→6H13/2跃迁发射的浓度猝灭机制均为电偶极-电四极相互作用.     

GdF3∶Er3+，Yb3+的合成和上转换发光特性

采用水热法制备了Er3 离子浓度为3%,yb3 离子浓度分别为10%,20%的GdF3:Er3 ,Yb3 .XRD结果表明:合成的样品均为正交结构的GdF3,Cd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品的晶粒尺寸分别为28和26 nm.研究了980 nm红外光激发的上转换发射光谱.结果表明:红光和绿光发射分别来自于Er3 离子的2H11/2,4S3/2→4I15/2和4F9/2→4I15/2跃迁.样品的绿光发射强度较红光发射强.但绿光和红光发射的相对强度比例与Yb3 离子浓度有关.对Gd0.87Yb0.10Er0.03F3和Gd0.77Yb0.20Er0.03F3样品中可能的上转换发光机制进行了讨论.     

3-Acylaminopyrazole derivatives via a regioselectively N-protected 3-nitropyrazole

A simple procedure for the selective protection of the endocyclic 1-N of 3-aminopyrazoles as tert-butoxycarbamate (Boc) in good yield is described. A 3-nitropyrazole derivative represents the key intermediate with the nitro substituent determining the regiochemistry of the obtained protected compound. Subsequent acylation at the exocyclic amino group gave rise, after Boc removal, to a series of 3-acylaminopyrazoles in high yields and purities.     

用硫代米蚩酮光度法测定微量卤酸根离子的研究

在不同浓度盐酸溶液中,ＣｌＯ－３、ＢｒＯ－３、ＩＯ－３可分别与硫代米蚩酮、ＮＨ４ＳＣＮ形成蓝色配合物,λｍａｘ为６２０ｎｍ。卤酸根测定的线性范围ＩＯ－３为０～３．０μｇ／１０ｍＬ、ＣｌＯ－３、ＢｒＯ－３为０～４．０μｇ／１０ｍＬ。摩尔吸光系数分别为εＣｌＯ－３＝７．６７×１０４、εＢｒＯ－３＝９．９４×１０４、εＩＯ－３＝１．４５×１０５。本法灵敏、选择性好、操作简便,已用于化学试剂中卤酸根的测定。     

白光LED用荧光材料Ba3 Gd( BO3 )3:Eu3+的发光性能研究

用高温固相反应法制备了稀土离子Eu3+ 掺杂的三元稀土硼酸盐Ba3Gd(BO3)3发光材料, 通过X射线衍射 (XRD) 、荧光光谱和扫描电镜 (SEM) 等测试手段对Ba3Gd(BO3)3:Eu3+ 荧光粉的制备条件、发光性能以及形貌进行了研究. XRD结果表明, 在1000 ℃时可得到Ba3Gd(BO3)3 纯相. 扫描电镜照片显示颗粒基本为球形, 粒径约为200～400 nm. 发光光谱测试表明, Ba3Gd(BO3)3:Eu3+荧光粉在近紫外区(UV) (396 nm)和蓝光区(466 nm)可以被有效地激发, 分别用255和396 nm的紫外光激发样品时, 以Eu3+ 的 5D0-7F2 (611和616 nm) 超灵敏跃迁为主要发射峰. 当Eu3+的掺杂浓度为10%(摩尔分数)时, Ba3Gd(BO3)3:Eu3+ 在611和616 nm处的发光强度最大. 因此, 这种荧光粉是一种可能应用在白光LED上的红色荧光材料.     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

R—ReO3的构型和电子结构的密度泛函研究

在X3LYP /6-311+G(2d,p)的水平下系统地研究了一系列高价有机铼氧化物(R—ReO3·Ln)的几何构型和电子结构. 研究结果表明, 用X3LYP方法预测的几何结构与实验值符合得很好, 键长的误差一般小于0.001 nm, 而键角的误差小于1°. 同时发现不同配位类型的R基和L配体显著影响铼氧化合物的酸性以及Re—O键能. 应用NBO分析和前线轨道理论可以合理地阐明配体调变的实质.     

243～263nm CH3COCH3 的多光子电离研究

在243～263 nm紫外光波段通过质量选择光电离激发谱研究了丙酮（CH3COCH3）的光化学反应通道。分析母体离子CH3COCH3+和碎片离子CH3CO+ 、 CH3+的光电离激发谱和质谱峰宽可以知道: 此光波段丙酮分子的光化学反应主要包括了丙酮分子经由(S1,T1)中间态产生母体离子的（1+1）双光子电离通道,母体离子进一步解离产生碎片离子CH3+的“光电离-光解离”通道和丙酮分子经由(S1,T1)中间态解离成中性自由基碎片CH3CO后再进一步被双光子电离的“光解离-光电离”通道。由母体离子光电离激发谱双光子阈值波长（255.67 nm）给出的丙酮电离势（IP）为（9.696±0.004）eV。     

马钱子碱分子结构和振动光谱的密度泛函理论研究

用密度泛函理论B3LYP/6-31G*方法对天然药材马钱子中的生物碱马钱子碱的几何构型进行了优化,得到马钱子碱分子的平衡结构参数,并同实验结构进行了比较.计算了上述分子在平衡构型下的振动谐力场和振动基频.针对不同的振动模式,提出了相应的校正因子,并据此对计算频率进行了校正.理论计算和实验测定频率的平均误差为19.0cm-1.根据DFT计算的振动模式和IR光谱强度值对目标分子的实验振动基频进行了完善的和合理的指认和解释.