Enantiomer separation of drugs by micellar electrokinetic chromatography using chiral surfactants

A review surveying enantiomer separations by micellar electrokinetic chromatography (MEKC) using chiral surfactants is described. MEKC is one of the most popular techniques in capillary electrophoresis, where neutral compounds can be analyzed as well as charged ones, and the use of chiral micelles enable one to achieve the enantioseparation. The chiral MEKC systems are briefly reviewed according to the types of chiral surfactants along with typical applications. As chiral micelles or pseudostationary phases in MEKC, various natural and synthetic chiral surfactants are used, including several low-molecular-mass surfactants and polymerized surfactants or high-molecular-mass surfactants. Cyclodextrin modified MEKC using chiral micelles is also considered.     

Determination of Critical Micelle Concentration of Surfactant in Organic Solvent by Capillary Electrophoresis

In this work, some uncharged hydrophobic compounds, such as p-arylacetophenones, polycyclic aromatic hydrocarbons and steroids have been separated by micellar electrokinetic chromatography (MEKC) using organic solvents and surfactants.     

Copolymerized polymeric surfactants: characterization and application in micellar electrokinetic chromatography

An achiral monomeric surfactant (sodium 10-undecenyl sulfate, SUS) and a chiral surfactant (sodium 10-undecenoyl L-leucinate, SUL) were synthesized and polymerized individually to form poly-SUS and poly-SUL. These surfactants were then copolymerized at various molar ratios to produce a variety of copolymerized surfactants (CoPSs), possessing both achiral (sulfate) and chiral (leucinate) head groups. The CoPSs, poly-SUS, poly-SUL, and sodium dodecyl sulfate were characterized using several analytical techniques. The aggregation numbers of the polymeric surfactants and the partial specific volumes were determined by the use of fluorescence quenching and density measurements, respectively. These polymeric surfactants were investigated as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC) for the separation of chiral and achiral solutes. Solute hydrophobicity was found to have major influence on the MEKC retention of alkyl phenyl ketones. In contrast, hydrogen-bonding ability of benzodiazepines is the major factor that governs their retention, but hydrophobicity has an insignificant effect on MEKC retention of benzodiazepines.     

Micellar electrokinetic chromatography-mass spectrometry

The combination of micellar electrokinetic chromatography (MEKC) with mass spectrometry (MS) is very attractive for the direct identification of analyte molecules, for the possibility of selectivity enhancement, and for the structure confirmation and analysis in a MS-MS mode. The direct coupling of MEKC with MS can be hazardous due to the effect of nonvolatile MEKC surfactants on MS performance, including the loss of analyte sensitivity and ion source contamination. The possibility of off-line coupling between MEKC and matrix-assisted laser desorption/ionization (MALDI)-MS remains to be investigated. Various approaches for on-line coupling MEKC with electrospray ionization (ESI)-MS, including the use of high-molecular-mass surfactant, an electrospray-chemical ionization (ES-CI) interface, a voltage switching and buffer renewal system, partial-filling micellar plug and anodically migrating micelles, are reviewed and evaluated. The use of an ES-CI interface is most promising for routine operation of on-line MEKC-MS under the influence of nonvolatile salts and surfactants. The use of a high-molecular-mass surfactants allows the formation of a micellar phase at very low surfactant concentrations and avoids the generation of a high level of background ions in the low m/z region. Alternatively, the application of a partial-filling micellar plug and anodically migrating micelles eliminate the introduction of MEKC micelles into the ESI-MS system. It is possible to directly transfer the conventional MEKC separations to partial-filling MEKC-ESI-MS and MEKC-ESI-MS using anodically migrating micelles without any instrument modifications.     

On-line sample concentration in micellar electrokinetic chromatography with cationic micelles in a coated capillary

The electroosmotic flow was successfully suppressed even in the presence of cationic surfactants, when a polyacrylamide-coated capillary was employed. Two on-line sample concentration techniques of sample stacking and sweeping were evaluated in micellar electrokinetic chromatography (MEKC) using the polyacrylamide-coated capillary. Cationic surfactants were used as pseudostationary phases in MEKC. At least 60-fold and about 600-fold increases in detection sensitivity were obtained in terms of peak heights by sample stacking and sweeping, respectively.     

MEKC as a powerful growing analytical technique

This review summarizes the principle and the developments in MEKC in terms of separation power, sensitivity, and detection approaches more than 25 years after its appearance. Newly used surfactants are mentioned. Classical and new sample concentration techniques in MEKC are described. The different detection approaches in MEKC with advantages, limitations, and future prospects are also discussed. This review highlights the wider application of MEKC in different analytical fields. Various recent selected applications of this technique in different analytical fields are reported.     

Widening of the elution window in micellar electrokinetic chromatography with cationic surfactants. II. Cationic additives and modifiers of the electroosmotic flow.

In micellar electrokinetic chromatography (MEKC) with cationic surfactants the migration window is significantly narrower than with anionic surfactants. In order to overcome this disadvantage of cationic surfactants, it is investigated whether it is possible to widen the migration window by reducing the velocity of the aqueous phase while the electrophoretic mobility of the micelles is maintained. Short chain alkylammonium compounds, hexamethonium bromide and hydroxypropylmethylcellulose are tested as additives to the separation electrolyte with the potential to improve the migration window via reducing the velocity of the electroosmotic flow. It will be shown that these modifiers can be successfully used in order to widen the migration window in MEKC with cationic surfactant employing an alkyltrimethylammonium bromide as micelle forming agents. Influence of the modifiers selected on retention of neutral and acidic solutes and on efficiency of the separation system is investigated.     

Micellar electrokinetic chromatography: current developments and future

This review highlights recent methodological and instrumental advances in micellar electrokinetic chromatography (MEKC). Enhancements in sensitivity and selectivity of the technique through the use of on-line preconcentration approaches (stacking and sweeping) and nonconventional pseudostationary phases, namely nonionic and zwitterionic surfactants, mixed micelles and polymers, are discussed in detail. Laser-induced fluorescence and mass spectrometry, as alternatives to UV-absorption detection, have been covered to evaluate their advantages and limitations when applied to analysis in an MEKC format. Some thoughts on future directions in this area such as in-capillary reactions, coated capillaries and MEKC on microchips are also presented.     

表面活性剂在高效毛细管电泳中的作用

表面活性剂作为缓冲液添加剂已广泛用于高效毛细管电泳中,综述了阴离子、阳离子、两性离子、非离子及手性等多种表面活性剂在离子、中性分子、手性化合物、多肽和蛋白质分离等方面的作用,介绍了其作用机理与改善高效毛细管电泳分离的原理。     

Polymeric sulfated surfactants with varied hydrocarbon tail: II. Chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships study

The effect of hydrocarbon chain length on chemical selectivity in micellar electrokinetic chromatography (MEKC) was investigated using polymeric sulfated surfactants: poly-(sodium 7-octenyl sulfate), poly(sodium 8-nonenyl sulfate), poly(sodium 9-decenyl sulfate), and poly(sodium 10-undecenyl sulfate). Linear solvation energy relationships (LSERs) and free energy of transfer studies were conducted to predict the selectivity differences between the four polymeric surfactants. The overall nature of the solute/ polymeric micelle interactions was found to be different despite the fact that all polymeric surfactants have the same head group. The polar character and acidic strength of the polymeric surfactant are found to decrease as the hydrocarbon chain length of the surfactant is increased. On the other hand, the polarizability of the polymeric sulfated surfactants increases (upon interacting with solute lone-pair electrons) with increasing hydrocarbon chain length. The LSER results show that the solute size and hydrogen bond accepting ability play the key roles in MEKC retention.     

Separation of aromatic sulfonate compounds by coelectroosmotic micellar electrokinetic chromatography

Summary Coelectroosmotic micellar electrokinetic chromatography (coelectroosmotic MEKC) has been investigated for the separation of twelve aromatic sulfonate compounds. The advantage of this method is that it combines the efficient separation characteristic of MEKC and the short analysis time of the coelectroosmotic mode. MEKC was performed with either cetyltrimethylammonium bromide (CTAB) or polyethylene glycol dodecyl ether (Brij 35) surfactants as pseudostationary phases and 2-propanol as organic modifier. The electroosmotic Flow (EOF) was reversed by adding two types of EOF modifier, an alkylammonium salt (cetyltrimethylammonium bromide, CTAB) or a cationic polyelectrolyte (hexadimetrine bromide, HDB). The surfactant concentration, applied voltage, and temperature were optimized, the influence of 2-propanol on the MEKC resolution of the compounds was studied. The effect of the osmotic modifier on the separation was also investigated.     

Novel anionic copolymerized surfactants of mixed achiral and chiral surfactants as pseudostationary phases for micellar electrokinetic chromatography

One disadvantage of amino acid-based chiral selectors for micellar electrokinetic chromatography (MEKC) is that either they have very low solubility or are insoluble at acidic pHs. In order to increase solubilities at lower pHs, we have synthesized a highly water-soluble achiral surfactant and copolymerized it with an amino acid-based chiral surfactant. These two surfactants were polymerized either separately or at various molar rations of binary solutions, yielding pure molecular or copolymerized surfactant (CoPS), respectively. All surfactants were characterized by use of several analytical techniques prior to using them as novel pseudostationary phases in MEKC. The chromatographic performance of the CoPS in MEKC was tested with chiral and achiral analytes. The highly soluble sulfate head group significantly increased the solubility of amino acid-based CoPS over a wide range of pH. Three chiral binaphthyl derivatives were tested and each surfactant system was found to have different selectivity.     

MEKC: an update focusing on practical aspects

This paper reviews recent methodological and instrumental advances in MEKC. Improvements in sensitivity arising from the use of on-line sample concentration (sweeping, stacking, and combination of both protocols) and derivatization (in-capillary reactions and coupling with flow-injection systems) and improvements in resolution obtained by changing the composition of the BGE (e.g., with organic modifiers, ionic liquids, nonionic and zwitterionic surfactants, mixed micelles, and vesicles) or using coated capillaries are discussed in detail. In addition, MS and LIF spectroscopy are examined in relation to their advantages and restrictions as applied to MEKC analysis. Some thoughts on potential future directions are also expressed.     

Bile Salts in Chiral Micellar Electrokinetic Chromatography: 2000–2020

Bile salts are naturally occurring chiral surfactants that are able to solubilize hydrophobic compounds. Because of this ability, bile salts were exploited as chiral selectors added to the background solution (BGS) in the chiral micellar electrokinetic chromatography (MEKC) of various small molecules. In this review, we aimed to examine the developments in research on chiral MEKC using bile salts as chiral selectors over the past 20 years. The review begins with a discussion of the aggregation of bile salts in chiral recognition and separation, followed by the use of single bile salts and bile salts with other chiral selectors (i.e., cyclodextrins, proteins and single-stranded DNA aptamers). Advanced techniques such as partial-filling MEKC, stacking and single-drop microextraction were considered. Potential applications to real samples, including enantiomeric impurity analysis, were also discussed.     

Solute-solvent interactions in micellar electrokinetic chromatography: IV. Characterization of electroosmotic flow and micellar markers

A wide study of the compounds and procedures mostly used to determine the electroosmotic flow (EOF) and micelle elution times has been done in seven different micellar electrokinetic chromatography (MEKC) systems. These systems are formed from mixtures of an aqueous buffer with the surfactants sodium dodecyl sulfate, lithium dodecyl sulfate, lithium perfluorooctane sulfonate, sodium cholate, sodium deoxycholate, tetradecyltrimethylammonium bromide and hexadecyltrimethylammonium bromide. The solvation parameter model has been used to evaluate the usefulness of the compounds studied as EOF or micellar markers in each of the seven MEKC systems. It is demonstrated that methanol, acetonitrile and formamide are the best EOF markers, and that dodecanophenone is the best micellar marker.     

Statistical evaluation of linear solvation energy relationship models used to characterize chemical selectivity in micellar electrokinetic chromatography

Characterization of retention and selectivity differences between surfactants in micellar electrokinetic chromatography (MEKC) using linear solvation energy relationships (LSERs) has been given a significant amount of attention in the last four years. This report evaluates the validity of using the two LSER models that have been used to fit retention in MEKC in the literature. The results and the fit of the revised model and parameters developed by Abraham and coworkers are compared to the original model developed by Kamlet, Taft, and coworkers. LSERs can generally only be used as a comparative tool to describe the selectivity differences between surfactant systems used in MEKC. With this in mind, it was determined that the results of both models essentially provide the same information about these differences. However, the revised model and parameters have been found to yield a statistically better fit of the MEKC retention data as well as providing more chemically sound LSER coefficients.     

Characterization and application of sodium di(2-ethylhexyl) sulfosuccinate and sodium di(2-ethylhexyl) phosphate surfactants as pseudostationary phases in micellar electrokinetic chromatography

Sodium di(2-ethylhexyl) sulfosuccinate (DOSS) and sodium di(2-ethylhexyl) phosphate (NaDEHP) surfactants, with double alkyl chains and negatively charged headgroups, were characterized using fluorescence quenching, densitometry, and tensiometry techniques to determine their aggregation number, partial specific volume, and critical aggregation concentration. These two surfactants were then applied as pseudostationary phases in micellar electrokinetic chromatography (MEKC) for separations of alkyl phenyl ketones. The aggregation number of NaDEHP was found to be more than two-fold higher than that of DOSS. The partial specific volumes of NaDEHP and DOSS were found to be 0.9003 and 0.8371 mL/g, respectively. The critical aggregation concentrations are 5.12 and 1.80 mM for NaDEHP and DOSS, respectively. The DOSS surfactant provided a wider separation window and had a greater hydrophobic environment than the NaDEHP surfactant under the MEKC experimental conditions studied.     

Micellar electrokinetic chromatography separations of dynorphin peptide analogs

Prodynorphin is a precursor that has multiple cleavage sites to release various dynorphin opioid peptides. The dynorphin analogs used in this study have 18 amino acid residues. A series of dynorphin-like peptides, differing by a single residue (alanine substitution) were assembled by Fmoc solid-phase procedures and purified by preparative high performance liquid chromatography (HPLC). Separation of the Ala-scan dynorphin analogs was investigated by micellar electrokinetic chromatography (MEKC) employing anionic, cationic and zwitterionic surfactants. The role of electrostatic and hydrophobic forces in analyte-surfactant interactions is discussed with respect to the observed elution patterns. Separation of all dynorphin analogs by MEKC using a zwitterionic surfactant shows this technique to be powerful for separating closely related peptide species. It also demonstrates the potential for using MEKC for the prescreening of peptide libraries to determine their biological activity toward specific receptors. Results from the separation of dynorphin analogs by free solution and ion-pairing capillary electrophoresis are also presented.