Single‐wall Boron Nitride Nanotube with Various Diameters under the Influence of Electric Field,A Computational Investigation

Structural and electrical response of the (4, 0), (5, 0) and (6, 0) zigzag model of single‐walled boron nitride nanotube (BNNT) with H‐terminated at the open ended, have been investigated under the external electric field (EF) with intensities 0–1.6 × 10^?2 a.u. using the DFT B3LYP/6‐31G* level of theory. Results of this study show that with increasing BNNTs diameter, the HOMO‐LUMO gap (HLG) values increase, and with increasing the EF intensity, the HLG values decrease. In both cases with increasing EF intensity and the BNNT diameters, the electric dipole moment is increased significantly. Also the calculated natural bond orbital (NBO) atomic charges on the atoms of the BNNT show that the separation of the center of the positive and the center of the negative electric charges of the boron nitride nanotubes are increases in both case. We have found that the properties of the BNNTs are dependent on their diameters and can be tuned by applied electric fields intensity.     

锂化硼氮纳米管的二阶非线性光学理论研究

基于硼氮纳米管(BNNTs), 研究了多重锂化硼氮纳米管Li_n-(n,0,l)BNNTs(n=6和8, l=2~4)的结构与非线性光学性质. 研究表明, 在Li_n-(n,0,l)BNNTs中, Li原子上的自然键轨道电荷接近+1(0.769～0.827 e), 表明Li原子上的电子转移到了硼氮纳米管上, 从而形成了多重锂盐. 同时发现, 增加管长和拓宽管径都可有效地增加体系的一阶超极化率. 更重要的是, Li_n-(n,0,l)BNNTs的紫外-可见吸收主要发生在270~290 nm附近, 且当管长增加时, Li_n-(n,0,l)BNNT的紫外-可见吸收光谱发生了蓝移, 改善了非线性与透光性之间的关系. 此外, Li_n-(n,0,l)BNNTs还具有良好的稳定性[垂直电离势(VIP)=5.85～6.0 eV].     

杂原子掺杂的含单空位缺陷BN纳米管的非线性光学性质

采用密度泛函理论(DFT)研究了杂原子M(M=Li, Na, K, Be, Mg, Ca, C和Si)在B/N单空位缺陷处的掺杂对(6,0)BN纳米管体系非线性光学性质的影响. 采用B3LYP方法共得到了14种几何构型, 并采用BHandHLYP方法计算了这些结构的第一超极化率β₀值. 研究结果表明, 单纯的B或N缺陷几乎不影响BN纳米管体系的非线性光学性质; 与B缺陷处掺杂的体系相比, 杂原子在N缺陷处的掺杂更有利于提高BN纳米管体系的第一超极化率β₀值; 对于同周期掺杂原子, 还原性越强的原子掺杂对BN纳米管体系的第一超极化率β₀值的改善越明显, 表现为β₀(Ⅰ族)>β₀(Ⅱ族)>β₀(Ⅳ族); 对比同主族掺杂原子, 第三周期元素Na和Mg的掺杂能更有效地提高体系的第一超极化率β₀值, 原因主要在于原子半径和还原性等因素共同决定其对BN纳米管体系第一超极化率β₀值的改善程度. 本文研究结果为有效提高BN纳米管体系的非线性光学性质提供了一种新思路, 为基于BN纳米管的非线性光学材料设计提供了有价值的理论信息.     

A New Target for Synthesis: Theoretical Prediction for the Reaction between Boron Nitride Nanotube and Dichlorocarbene

Understanding the chemistry of BNNT is a crucial step toward their ultimate practical use. A comparative study of Reactions A （ASWCNT （5,5） and CCl2） and B （ASWBNNT （5,5） and CCl2） have been performed by using ONIOM （B3LYP/6-31G＊： AM1） method in Gaussian03 program package. The results show that （1） the two reactions are both exothermic; （2） the mechanism of Reaction B is a two-step mechanism; （3） the difference in energy barriers suggests that the reaction of CCl2 with BNNT is easier than with CNT; （4） in reaction B, CCl2 prefers to attack the boron atom of BNNT first.     

A New Class of Boron Nanotube

The configurations, stability and electronic structures of a new class of boron sheet and related boron nanotubes are predicted within the framework of density functional theory. This boron sheet is sparser than those of recent proposals. Our theoretic results show that the stable boron sheet remains flat and is metallic. There are bands similar to the π‐bands in graphite near the Fermi level. Stable nanotubes with various diameters and chiral vectors can be rolled from the sheet. Within our study, only the thin (8, 0) nanotube with a band gap of 0.44 eV is semiconducting, while all the other thicker boron nanotubes are metallic, independent of their chirality. It indicates the possibility, in the design of nanodevices, to control the electronic transport properties of the boron nanotube through the diameter.     

Fabrication,Characterization and Optical Properties of TiO2 Nanotube Arrays on Boron-doped Diamond Film Through Liquid Phase Deposition

TiO2 nanotube（TiNT） arrays were deposited on boron-doped diamond films by a liquid-phase deposition method with ZnO nanorod arrays as the template.The different morphologies of TiNTs have been obtained by controlling the morphology of ZnO template.The X-ray diffraction and energy-dispersive X-ray analysis show that the ZnO nanorod array template has been removed in the TiNTs formation process.The crystalline quality of the TiNTs is improved by increasing the annealing temperature.The band gap of the TiNTs is about 3.25 eV estimated by the UV-Vis absorption spectroscopy,which is close to the value of bulk TiO2.In the photoluminescence spectrum,a broad visible emission in a range of ca.550-750 nm appears due to the surface oxygen vacancies and defects.     

Computational Study of the Stability of Nanotube Fragments

Extremely short (<1 nm) fragments of zig‐zag carbon nanotubes are studied with ab‐initio techniques to determine their geometric and electronic structure as well as their magnetic susceptibility. It is found that for lengths of a few carbon–carbon bonds, each fragment can be viewed as composed of crowns, that is, zig‐zag rings of carbon atoms along the circumference of the tube. In this case, two kinds of electronic structures are found, depending on whether the number of carbon atoms in each crown is even or odd. Systems comprising three or more crowns either have a high spin ground state or involve a charge transfer across the length of the fragment. Conjugation changes qualitatively when the length of the fragment approaches and surpasses its girth. Indications regarding the predicted chemical stability and electronic response are provided and interpreted in terms of current densities induced within each crown by a magnetic field along the tube axis.     

氮化硼纳米管-纳米片分级结构的制备及光学和吸附特性

将五硼酸铵、 氨硼烷络合物和氧化镁混合, 球磨均匀后, 在1200 ℃及0.6 L/min流动氨气保护条件下退火6 h, 即可在氧化铝基片上收集到白色毛状产物. 采用X射线衍射(XRD), 红外光谱(FTIR)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 拉曼光谱(Raman)、 紫外-可见吸收光谱(UV-Vis)和荧光光谱(PL)对产物进行了表征. 结果表明, 样品呈一维线状分级结构, 长度大于5 mm, 中间为竹节状空心结构, 内部管径为50~350 nm, 外径范围为200~800 nm. 分级结构表面负载了大量氮化硼(BN)纳米薄片, 单个薄片厚度约为13 nm. 薄片弯曲褶皱, 相互交织, 构成1个氮化硼片层, 其厚度约为50~200 nm. UV-Vis和PL光谱测试结果表明, 氮化硼纳米管(BNNT)分级结构在紫外光材料领域具有一定的应用潜力, 且对亚甲基蓝具有良好的吸附能力(7 min即可吸附71%, 107 min时可吸附96%). 对比实验结果表明, BNNT的生长机理遵循气-液-固相(VLS)模型, 而表面负载的超薄BN片的生长机理遵循气-固相(VS)模型.     

NH3在硼纳米管表面吸附的密度泛函理论研究

利用密度泛函理论研究了NH₃在完整和含有缺陷的硼纳米管上的吸附行为以及相关电子性质. 计算结果表明, 对于α硼纳米管, 在不同的直径和手性条件下, NH₃均倾向于吸附在配位数为6的顶位上. 电子结构计算结果表明, NH₃能够吸附在纳米管表面主要是由于N和B原子产生了较强的相互作用. 表明硼纳米管是一种潜在的NH₃气气敏材料.     

硼的土壤化学及其生物有效性的研究进展

综述了近年来有关硼的土壤化学及其生物有效性的研究成果。主要内容涉及土壤对硼的吸附与硼的解吸及其影响因素；土壤硼吸附的主要化学模型及其优缺点；土壤硼生物有效性的影响因素等；并评述了硼的研究现状。     

硅掺杂的氮化硼纳米管对氯化氰吸附性能的理论研究

为了探索氮化硼纳米管(BNNT)在化学传感器件领域的潜在应用,我们利用密度泛函理论研究了(8,0)单壁BNNT和硅掺杂的(8,0)BNNT对毒性气体氯化氰分子(ClCN)的吸附性能.结果表明,硼位或氮位硅掺杂的BNNT,均对ClCN分子存在较强的化学吸附,而纯氮化硼纳米管对ClCN仅有较弱的物理吸附.态密度的计算进一步表明硅掺杂使纳米管费米能级附近的电子结构发生显著变化,由于杂化态的引入,使带隙明显减小,增强了对毒性ClCN分子的吸附敏感性.硅掺杂的BNNT有望成为检测毒性ClCN分子的潜在资源.     

Covalent Functionalization of Pristine and Ga-Doped Boron Phosphide Nanotubes with Imidazole

Abstract

Density functional theory (DFT) calculations at the B3LYP/6–31G* level were performed to investigate covalent functionalization of imidazole on pristine (in gas and H₂O phases) and Ga-doped BPNT models in terms of energetic, geometric, and electronic properties. The results show that imidazole, as a functional group, prefers to be adsorbed via its nitrogen atom on the pristine, Ga_B, and Ga_P nanotube models. The adsorption energy of imidazole on the (6,0) zigzag BPNT in gas and solvent phases is ?0.76 and ?1.11 eV, respectively, and about 0.38 and 0.43 electron are transferred from the imidazole to nanotube in the phases. The presence of a polar solvent increases the electron donor of imidazole molecule. The results show that Ga doping can significantly enhance the adsorption energy of imidazole on the nanotube models to about 95%.

Moreover, the imidazole adsorption on the pristine and Ga-doped BPNT models has not significant changes in the energy gap of the nanotube models and it is slightly changed after covalent functionalization process. This study may provide new insight to the development of functionalized boron phosphide nanotubes for generation of the new hybrid compounds especially in drug delivery systems for virtual applications.     

Hybrid Composite of Polyaniline Containing Carbon Nanotube

Among various conducting polymers, polyaniline (PANI) is a unique and promising candidate for practical applications because it is not only highly stable in air and in some solvents, but also exhibits dramatic changes in its electronic structure and physical properties in protoactivate state1,2,3. The carbon nanotubes (CNTs) have been proven to possess exotic properties, such as high mechanical strength, flexibility and electric conductivity. The study of carbon-based nanostructures and ma…     

微量硼的测定方法研究进展

综述了测定微量、痕量硼的各种方法,如分光光度法、电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法等方法的特点,并说明了其测定微量硼的应用领域.并对微量硼的测定技术进行了展望.     

Spontaneous Nanotube Formation in Aqueous Mixture of Cationic Surfactant and Anionic Flat Compound

In this article, we report a spontaneous nanotube formation through mixing two simple, achiral chemicals, dodecyltrimethylammonium bromide (DTAB), and 1-phenylazo-2-naphthol-6,8-disulfonic acid disodium salt (Orange G) in aqueous solution. Nanotubes with outer diameter of about 50 to 100 nm and length of several microns were formed after mixing, which was demonstrated by TEM, turbidity, and viscosity methods. The formation is attributed to the different configurations of of Orange G since its structure is flat, which has both narrow and broad sides. The molecule pairs of Orange G/cone-like DTAB will have two different configurations in the meantime, cup like at the front and cylinder-like at the profile. The cuplike molecule pairs constitute a vesicular curvature which form the transverse section of nanotube, whereas the cylinder-like molecule pairs constitute the planar curvature which form the nanotube's profile section. Nanotube with different curvature at lengthwise and crosswise are thus formed.     

椅型碳纳米管吸附氢原子电子结构的密度泛函研究

采用密度泛函方法对氢原子在(5,5)椅型碳纳米管上的吸附进行了研究, 分别考察了氢原子覆盖度为5%和10%时的构型和吸附能. 研究结果表明, H原子吸附在管外壁要比管内壁能量上更为有利, 同时第二个H原子倾向于吸附在前一个H原子的吸附位置邻近的碳原子上. 由能带计算结果得知, 吸附一个H原子时, 椅型碳纳米管将由导体转变为半导体; 当第二个H原子处在偶数位时, 纳米管仍保持较好的导电性能, 而吸附在奇数位时将使管的传输能力减弱. 本文进一步通过分析纳米管(共轭体系的分布情况对管传输性质的变化进行解释.     

基于单壁碳纳米管-DNA酶复合结构的电化学生物传感器

结合DNA酶优异的氧化还原催化特性和碳纳米管的电化学特性, 制备了单壁碳纳米管-DNA酶复合材料, 并通过壳聚糖将其固定到玻碳电极表面构建了电化学生物传感界面. 研究了单壁碳纳米管-DNA酶复合结构的氧化还原反应催化特性, 并以此为传感平台构建了葡萄糖氧化酶电化学生物传感器. 结果表明, 单壁碳纳米管-DNA酶复合材料修饰的电极对过氧化氢的响应具有较宽的线性范围(5×10^-6~1×10^-2 mol/L)和良好的检测灵敏度(检出限为1×10^-6 mol/L). 采用制备的葡萄糖氧化酶传感器实现了对葡萄糖的快速灵敏检测.     

Freestanding Carbon Nanotube Film for Flexible Straplike Lithium/Sulfur Batteries

Flexible lithium/sulfur (Li/S) batteries are promising to meet the emerging power demand for flexible electronic devices. The key challenge for a flexible Li/S battery is to design a cathode with excellent electrochemical performance and mechanical flexibility. In this work, a flexible strap-like Li/S battery based on a S@carbon nanotube/Pt@carbon nanotube hybrid film cathode was designed. It delivers a specific capacity of 1145 mAh g⁻¹ at the first cycle and retains a specific capacity of 822 mAh g⁻¹ after 100 cycles. Moreover, the flexible Li/S battery retains stabile specific capacity and Coulombic efficiency even under severe bending conditions. As a demonstration of practical applications, an LED array is shown stably powered by the flexible Li/S battery under flattened and bent states. We also use the strap-like flexible Li/S battery as a real strap for a watch, which at the same time provides a reliable power supply to the watch.     

铁掺杂TiO2纳米管阵列制备及其光电化学性质

应用电化学阳极氧化法,以Fe(NO3)3-HF的混合水溶液作电解液在Ti基底上制备Fe掺杂TiO2纳米管阵列.FESEM、Raman、XPS、DRS等测试表明:经Fe掺杂的TiO2纳米管阵列,管径50~90 nm,管长约200nm.与未掺杂TiO2纳米管阵列相比,前者的紫外可见起始吸收带边随着Fe掺入量的增加而红移;而光电化学性质如光电流也随之显著提高.