Hypothetical transformation of Ca(OH)<Subscript>2</Subscript> into CaCO<Subscript>3</Subscript> in solid-state reactions of portland cement

Summary Previous study of the hydration and ageing products of two cement pastes created the basis for the postulate of the course of solid-state reactions between the portlandite Ca(OH)₂ and the CO₂ from air in the hydrated and air dry cement. XRD basal spacing d(001) of portlandite exceeded the nominal value and increased with ageing, with the wetting and drying procedure and with carbonate content of the paste, indicating that a part of OH^- ions was gradually substituted by CO₃^2- ions, which are about twice bigger. IR spectroscopy showed a considerable content of portlandite, of CO₃^2- of water and silicates. Also HCO₃^- H₂O and CO₂ in cavities between hexagonal rings and hexagonal hydrates were indicated. By MS (mass spectrometry) in vacuum the evaporation of sorbed water was detected at 100-120°C, of gel water at 350°C of portlandite water at 400°C and of high temperature water between 500 and 700°C, simultaneously with CO₂ escape. Slightly higher peak temperatures were found by the TG test either in air or in argon. From these results and from geometric considerations it is postulated that the solid-state reactions take place on ageing of the cement paste and on its heating: hexagonal portlanditecalcium carbonate hydroxy hydratecalcium carbonate hydratehexagonal vaterite and/or orthorhombic aragoniterhombohedral calcite The analysis of the standard files of the calcium carbonate hydroxy hydrates supports this postulate and indicates a gradual transformation.     

Hydrothermally synthesized Ni(OH)<Subscript>2</Subscript>@Zn(OH)<Subscript>2</Subscript> composite with enhanced electrochemical performance for supercapacitors

Two kinds of electrode materials Ni(OH)₂ and Ni(OH)₂@Zn(OH)₂ composite are fabricated on nickel foam. Electrochemical experiments indicate Ni(OH)₂@Zn(OH)₂ composite deserves further study due to high specific capacitance and good cycle stability, so that it can achieve energy storage and conversion as much as possible. When the hydrothermal time is different, the electrochemical performance of the sample is also different. Accurately, samples can obtain better electrochemical performance at 15 h, and the maximum specific capacitance of Ni(OH)₂@Zn(OH)₂ is 7.87 F cm^?2 compared to Ni(OH)₂ (0.61 F cm^?2) at 5 mA cm^?2. Even at 50 mA cm^?2, specific capacitance is 5.24 F cm^?2 and rate capability is 66.6%. Furthermore, Ni(OH)₂@Zn(OH)₂-15 h loses 19.8% after 1000 cycles, revealing the composite has an outstanding stable cycle. These properties also indicate Ni(OH)₂@Zn(OH)₂-15 h is a promising electrode material.     

Synthesis and study of sodium triuranate Na<Subscript>2</Subscript>(UO<Subscript>2</Subscript>)<Subscript>3</Subscript>O<Subscript>3</Subscript>(OH)<Subscript>2</Subscript>

Sodium triuranate Na₂(UO₂)₃O₃(OH)₂ was synthesized by the reaction between aqueous uranyl acetate solution and aqueous sodium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the synthesized compound were determined, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and thermal analysis.     

Determination of activation effect of Ca(OH)<Subscript>2</Subscript> upon the hydration of BFS and related heat by isothermal calorimeter

Isothermal conduction calorimetry, differential thermal analysis (DTA)–thermogravimetric analysis (TG) analysis, and SEM observations have proved the activation effect of Ca(OH)₂ released from the C₃S hydration upon blast furnace slag (BFS). Five sample mixtures of BFS and C₃S and two samples of pure BFS and C₃S were submitted to reaction with water inside the calorimeter at room temperature. The values of hydration heat were recorded up to 7 days. Samples were stored in humidity during 28 days and then were submitted to DTA–TG and SEM analysis. The effect of Ca(OH)₂ upon heat evolution of sample mixtures has been quantified and its influence upon the formation of new hydrates and microstructure of pastes was evidenced.     

Thermal behaviour of [Ca(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

Motor gasoline must present characteristics that guarantee its quality and the good performance of internal combustion engines without harming the environment. The contamination of gasoline by solvents can seriously adulterate its physical-chemical properties and affect its volatility and detonation capacity. To investigate organic solvent adulteration in gasoline samples, thermal analysis technique (TG/DTG) can be used as an auxiliary tool in the study of the thermal behavior of liquid fuels, as demonstrated by the present work involving a comparative analysis of kerosene-free and doped gasoline.     

Synthesis and Characterization of Al(OH)<Subscript>3</Subscript>, Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanoparticles and Polymeric Nanocomposites

Applying of the most toxic halogenated and aromatic flame retardants is limited with respect to the environmental requirements. Nontoxic Al(OH)₃ nanoparticles were synthesized via a simple surfactant-free precipitation reaction at room temperature. The effect of various precipitation-agents on the morphology of the products was investigated. Al(OH)₃ nanoparticles were added to the polysulfone and poly styrene (PS) matrices. Electron microscope images show excellent dispersion of aluminium hydroxide in PS matrix. Nanoparticles appropriately enhanced both thermal stability and flame retardant property of the polymeric matrices. The enhancement of flame retardancy is due to endothermic decomposition of Al(OH)₃ that absorbs heat and simultaneously releases of water (makes combustible gases diluted and cold). Dispersed nanoparticles play the role of a barrier layer against flame, oxygen and polymer volatilization. Al(OH)₃ was converted to Al₂O₃ and its photo-catalyst property in degradation three different organic dyes as pollutants was investigated.     

Kinetics of the oxidation of diethyl sulfide in the B(OH)<Subscript>3</Subscript>-H<Subscript>2</Subscript>O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O system

Data obtained for the kinetics of oxidation of diethyl sulfide (Et₂S) by hydrogen peroxide in aqueous solution catalyzed by boric acid indicate that monoperoxoborates B(O₂H)(OH) ₃ ⁻ and diperoxoborates B(O₂H)₂(OH) ₂ ⁻ are the active species. The rates of the reactions of Et₂S with B(O₂H)(OH) ₃ ⁻ and B(O₂H)₂(OH) ₂ ⁻ are 2.5 and 100 times greater than with H₂O₂. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 38–42, January–February, 2007.     

Be<Subscript>2</Subscript>(OH)<Subscript>2</Subscript>CO<Subscript>3</Subscript> solubility in carbonate and fluoride aqueous solutions

Be₂(OH)₂CO₃ solubilities at 25°C in 0.7 M NaClO₄ solutions containing variable NaHCO₃ and Na₂CO₃ concentrations has been experimentally determined. The solubilities increase with increasing carbonate alkalinity. The results of the experiments do not contradict the suggestion that the mixed hydroxocarbonate complex Be₂(OH)₂CO ₃ ^2? is the major beryllium solute species. At fluoride concentrations higher than 250 μmol/L, the Be₂(OH)₂CO₃ solubilities noticeably increase as a result of the formation of beryllium fluoride complexes.     

The synthesis and thermochemical study of (Mg,Fe)<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> nanotubes

Nanotubular (Mg,Fe²⁺,Fe³⁺)₃Si₂O₅(OH)₄ hydrosilicates with a chrysotile structure were synthesized under hydrothermal conditions. The phases prepared were studied thermochemically on a high-temperature Tian-Calvet microcalorimeter by solution calorimetry. The standard enthalpies of formation of magnesium-iron nanotubular hydrosilicates were determined. The formation of iron-containing nanotubes was shown to be lass favorable energetically than the formation of magnesium nanotubes.     

Synthesis and characterization of Co(OH)<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> nanotube composites as supercapacitor materials

A novel composite of Co(OH)₂ and TiO₂ nanotubes was synthesized by a chemical precipitation method. Co(OH)₂/TiO₂ nanotube composites and its microstructure were characterized by transmission electron microscopy (TEM), X-ray diffraction pattern (XRD). The electrochemical capacitance performance of this composite was investigated by cyclic voltammetry and charge–discharge tests with a three-electrode system in 6 M KOH solution. We synthesized different weight ratios of Co(OH)₂/TiO₂ nanotubes, a maximum specific capacitance of 229 F/g was obtained for the composite. Based on these tests, we propose that TiO₂ nanotubes provide the three-dimensional nanotube network structure for the composite and make the Co(OH)₂ dispersed. For these reasons, the TiO₂ nanotubes used as a framework for Co(OH)₂ improve the utilization of Co(OH)₂ greatly.     

Supramolecular 2D structure of [Co(2-Me-Pyz)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>4</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The complex [Co(2-Me-Pyz)₂(H₂O)₄](NO₃)₂ is synthesized and its structure is determined. The crystals are monoclinic: space group P2₁/n, a = 10.685(2) Å, b = 6.837(1), c = 12.515(3) Å, β = 91.84(3)°, V = 913.8(3) ų, ρ_calcd = 1.042 g/cm ³, Z = 2. The Co²⁺ ion (in the inversion center) is coordinated at the vertices of the distorted octahedron by two nitrogen atoms of methylpyrazine and four oxygen atoms of the water molecules (Co(1)–N(1) 2.180(3), average Co(1)–O(w) 2.079(3) Å, angles at the Co atom 87.9(1)–92.1(1)°). Supramolecular pseudometallocycles are formed in the structure through the O(w)–H…N(1) hydrogen bonds between the coordinated H₂O molecules and the terminal nitrogen atoms of the 2-methylpyrazine molecules. Their interaction results in the formation of supramolecular layers joined by the NO₃ groups into a three-dimensional framework.     

Structure of aqueous dispersions of Mg<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>5</Subscript>(OH)<Subscript>4</Subscript> nanotubes

Behavior of hydrosilicate nanotubes of composition Mg₃Si₂O₅(OH)₄ in aqueous dispersions was studied. Experiments devoted to observation of steady-state and relaxation electro-optical effects demonstrated that, irrespective of their initial concentration in water, nanotubes form stable bulk aggregates with weak anisotropy, rather than a homogeneous system of separate suspended nanosize cylinders.     

Iron(II) complexes [Fe(DfgH)<Subscript>2</Subscript>(3-CONH<Subscript>2</Subscript>-Py)<Subscript>2</Subscript>] and [Fe(DfgH)<Subscript>2</Subscript>(4-COOC<Subscript>2</Subscript>H<Subscript>5</Subscript>-Py)<Subscript>2</Subscript>]: Synthesis and structures

The complexes [Fe(DfgH)₂(3-CONH₂-Py)₂] (I) and [Fe(DfgH)₂(4-COOC₂H₅-Py)₂] (II), where DfgH₂ is α-benzyl dioxime, were obtained and examined by X-ray diffraction analysis. The equatorial planes of the coordination octahedra of the metal ions consist of two monodeprotonated α-benzyl dioxime residues united through intramolecular hydrogen bonds O-H…O into a pseudomacrocyclic system. The neutral molecules 3-CONH₂-Py and 4-COOC₂H₅-Py are coordinated to the Fe²⁺ ion through the N atom of the heterocycle. Structure I is layered and structure II is molecular. Intermolecular interactions N-H…O are responsible for the formation of layers in crystal structure I.     

Structural investigation of [Au(en)<Subscript>2</Subscript>]Cl(ReO<Subscript>4</Subscript>)<Subscript>2</Subscript> and [Au(en)<Subscript>2</Subscript>](ReO<Subscript>4</Subscript>)<Subscript>3</Subscript> complexes

Novel complex salts [Au(en)₂]Cl(ReO₄)₂ (I) and [Au(en)₂](ReO₄)₃ (II), en = ethylenediamine, are obtained. Their crystal structures are determined by single crystal X-ray diffraction. Complex I crystallizes in the triclinic crystal system: a = 6.2172(7) Å, b = 7.1644(8) Å, c = 8.8829(8) Å, α = 96.605(4)°, β = 110.000(4)°, γ = 97.802(4)°, P-1 space group, Z = 1, d _x = 3.905 g/cm³; complex II crystallizes in the monoclinic crystal system: a = 15.244(2) Å, b = 7.6809(8) Å, c = 9.3476(12) Å, β = 127.004(3)°, C2 space group, Z = 4, d _x = 4.057 g/cm³.     

Crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH<Subscript>2</Subscript>NHC(O)NH<Subscript>2</Subscript>)<Subscript>2</Subscript>](NO<Subscript>3</Subscript>)<Subscript>2</Subscript>

The crystal structure of bis(semicarbazido)copper(II) nitrate [Cu(NH₂NHC(O)NH₂)₂](NO₃)₂ has been studied by X-ray diffraction. Monoclinic crystals, a = 6.835(2) Å, b = 7.733(2) Å, c = 10.320(3) Å, β = 105.701(3)°, V = 525.1(2) ų, space group P2₁/c, Z = 2, d _msd = 2.136 g/cm³, μ(MoK _α) = 2.143 mm⁻¹. The structure was solved with the program for automatic analysis of Patterson’s function and refined by full-matrix least squares in an anisotropic approximation for all non-hydrogen atoms using 753 independent reflections; R ₁ = 0.0203. The square environment of the Cu atom is formed from the amino nitrogen atoms of the hydrazine fragments and the C=O oxygen atoms of the two semicarbazide bidentate molecules (Cu-N 1.928 Å, Cu-O 1.999 Å). The axial positions are occupied by the O atoms of the NO ₃ ⁻ outer-spheric anions (Cu-O 2.505 Å). In the structure, the complex cations and the NO ₃ ⁻ anions are linked into a framework by N-H...O type hydrogen bonds. Original Russian Text Copyright ? 2007 by G. V. Romanenko, Z. A. Savelieva, and S. V. Larionov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 48, No. 2, pp. 370–373, March–April, 2007.     

Ternary water-salt system Sm(CCl<Subscript>3</Subscript>COO)<Subscript>3</Subscript>-Er(CCl<Subscript>3</Subscript>COO)<Subscript>v</Subscript>-H<Subscript>2</Subscript>O at 298 K

The system of samarium and erbium trifluoroacetates and water has been studied by the isothermal solubility technique at 298 K. The composition of the solids has been determined using the Schreinemakers wet residue technique. The refractive indices, specific volumes, and viscosities of liquid phases and the refractive indices of solid residues have been determined. A continuous solid solution is found to form in the system. Some thermodynamic parameters have been determined for this solid solution.     

Solid solutions in the system Nd(CCl<Subscript>3</Subscript> COO)<Subscript>3</Subscript>-Y(CCl<Subscript>3</Subscript> COO)<Subscript>3</Subscript>-H<Subscript>2</Subscript> O at 298 K

The water-salt system consisting of neodymium and yttrium trichloroacetates is studied by the isothermal solubility method at 298 K. The compositions of solid phases are determined by the Schreinemakers wet residues technique. Refractive indices, specific volumes, and viscosities for liquid phases and refractive indices of crystals for solid phases are determined. Continuous solid solutions are found in the system; some their thermodynamic characteristics are calculated.     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

Theoretical study on the reaction mechanism of the OH-initiated oxidation of CH<Subscript>2</Subscript>=C(CH<Subscript>3</Subscript>)CH<Subscript>2</Subscript>CH<Subscript>2</Subscript>OH

In the present work, the detailed reaction mechanism and possible products of the OH-initiated oxidation of CH₂=C(CH₃)CH₂CH₂OH (MBO331) have been revealed theoretically for the first time. The potential energy surfaces of various reaction channels both in the absence and presence of O₂ and NO are evaluated at the CCSD(T)/6−31++G(d,p)//MP2(full)/6−311G(d,p)+ZPE*0.95 level. The major products of HCHO + CH₃C(O)CH₂CH₂OH predicted for the title reaction in the presence of O₂ and NO are in agreement with those of similar reactions of unsaturated alcohols with OH radical.     

Synthesis and characterization of the [Ru<Subscript>3</Subscript>O(CH<Subscript>3</Subscript>COO)<Subscript>6</Subscript>(py)<Subscript>2</Subscript>(BPE)Ru(bpy)<Subscript>2</Subscript>Cl](PF<Subscript>6</Subscript>)<Subscript>2</Subscript> dimer

The polymetallic [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl](PF₆)₂ complex (bpy = 2,2′-bipyridine, BPE = trans-1,2-bis(4-pyridil)ethylene and py = pyridine) was assembled by the combination of an electroactive [Ru₃O] moiety with a [Ru(bpy)₂(BPE)Cl] photoactive centre, and its structure was determined using positive ion electrospray (ESI-MS) and tandem mass (ESI-MS/MS) spectrometry. The [Ru₃O(CH₃COO)₆(py)₂(BPE)Ru(bpy)₂Cl]²⁺ doubly charged ion of m/z 732 was mass-selected and subject to 15 eV collision-induced dissociation, leading to a specific dissociation pattern, diagnostic of the complex structure. The electronic spectra display broad bands at 409, 491 and 692 nm ascribed to the [Ru(bpy)₂(BPE)] charge-transfer bands and to the [Ru₃O] internal cluster transitions. The cyclic voltammetry shows five reversible waves at −1.07 V, 0.13 V, 1.17 V, 2.91 V and −1.29 V (vs SHE) assigned to the [Ru₃O]^{−1/0/+1/+2/+3} and to the bpy^0/−1 redox processes; also a wave is observed at 0.96 V, assigned to the Ru^+2/+3 pair. Despite the conjugated BPE bridge, the electrochemical and spectroelectrochemical results indicate only a weak coupling through the π-system, and preliminary photophysical essays showed the compound decomposes under visible light irradiation.