Pulsed laser deposition of photosensitive a-Si thin films

Si films have been fabricated by pulsed KrF excimer laser deposition (PLD) through the use of various Si targets and deposition conditions. The deposits consisted of droplets and homogeneous films, which were assigned to be crystalline and amorphous silicon, respectively, by the micro Raman scattering measurements. Not only the crystalline but also the amorphous Si part scarcely (<1 atomic %) contained hydrogen regardless of whether or not the films are prepared in the presence of H₂ gas. Conditions were explored to reduce the droplet formation and to produce photosensitive films. Amorphous Si films with photosensitivity (C_ph/C_d) exceeding 10³ were obtained, and they exhibited high stability against light soaking. Thus, PLD is a promising method to fabricate photosensitive and photostable a-Si films.     

LaNiO3 under-electrode layers for the growth of textured (Pb0.4Zr0.6)TiO3 thin films using pulsed laser deposition

We investigated the structural properties of LaNiO₃ thin films of three different thicknesses deposited by pulsed laser deposition on Si(001) mainly by using a synchrotron X-ray scattering measurement. The LaNiO₃ thin films were grown with the (00l) preferred growth direction, showing completely random distribution in the in-plane direction. In the early stage of the growth, the film was almost unstrained. However, as the film grew further, tensile strain was markedly involved. Also its surface became rougher but its crystalline quality improved significantly with increasing film thickness. A completely (00l)-oriented (Pb_0.4Zr_0.6)TiO₃ thin film was successfully grown on such a LaNiO₃/Si(001) substrate at a substrate temperature of 350 °C by using the same pulsed laser deposition. Our results show that the LaNiO₃ film can serve effectively as a bottom electrode layer for the preparation of a well-oriented (Pb_0.4Zr_0.6)TiO₃ thin film on Si substrates.     

Nanocrystalline growth and diagnostics of TiC and TiB2 hard coatings by pulsed laser deposition

Nanocrystalline coatings of TiC and TiB₂ were grown by pulsed laser deposition on Si(100) and on X155 steel at low substrate temperatures ranging from 40 °C to 650 °C. A pulsed KrF excimer laser was used with the deposition chamber at a base pressure of 10^-6 mbar. The morphology and structure of the films, studied with SEM, XRD, and TEM, showed that nanocrystalline films with a fine morphology of TiC and TiB₂ were deposited with a grain size of 10 nm-70 nm at all substrate temperatures. The growth of the polycrystalline coatings possessed a columnar morphology with a 𘜄¢ preferred orientation. The hardness of the coatings was determined to be 40 GPa and the elastic modulus, 240 GPa. The composition and the kinetics of the plume produced during the pulsed laser deposition of TiC and TiB₂ was studied under film growth conditions. The mass analysis of ions of the ejected material was performed by time-of-flight mass spectroscopy (TOF-MS) and showed the presence of Ti⁺ and C⁺ during TiC ablation and B⁺, B₂⁺, and Ti⁺ during TiB₂ ablation. The kinetic energies (KE) of the ions depended on the laser fluence which was between 0.5 eV and 340 eV. The kinetic energy and the evolution of the plasma was studied with a streak camera. The velocity of the plasma was of the order of 10⁶ cm/sec and was linearly dependent on the energy fluence of the laser. The emission spectroscopy of the plasma plume confirmed the atomic neutral and single excited species of Ti. These results show that coating growth basically occurs by the recombination of the ionic species at the surface of the substrate.     

Low-temperature growth of Y2O3 thin films by ultraviolet-assisted pulsed laser deposition

Thin Y₂O₃ films have been grown on (100) Si using an in-situ ultraviolet-assisted pulsed laser deposition (UVPLD) technique. When compared to conventional pulsed laser deposited (PLD) films under similar conditions, the UVPLD-grown films exhibited better structural and optical properties, especially those grown at lower substrate temperatures, from 200 °C to 400 °C. X-ray diffraction investigations showed that the films grown were highly crystalline and textured. According to X-ray photoelectron spectroscopy and Rutherford backscattering spectrometry investigations, UVPLD-grown Y₂O₃ films have a better overall stoichiometry and contain less physisorbed oxygen than the conventional PLD-grown films. The refractive index values, measured in the range 300-750 nm by using variable-angle spectroscopic ellipsometry, were similar to those of a reference Y₂O₃ film.     

Influence of oxygen pressure on structural and optical properties of Al2O3 optical waveguides prepared by pulsed laser deposition

Pure and europium doped alumina waveguides have been prepared by Pulsed Laser Deposition using a KrF excimer laser at oxygen pressures in the range from 10^-7 to 0.1 mbar. The composition of the films and the doping ion concentration were determined by Rutherford Backscattering Spectroscopy. From X-ray diffraction measurements, a progressive growth of %-Al₂O₃ crystallites is observed as the oxygen pressure decreases. After annealing treatment, the alumina films are constituted of !-Al₂O₃ crystallites while europium doped alumina films remain constituted of %-Al₂O₃ crystallites. The films have optical waveguiding properties. The mean refractive index of the film increases as oxygen pressure decreases.     

Adjusting chemical bonding of hard amorphous CSixNy thin films by N*-plasma-assisted pulsed laser deposition

Hard amorphous carbon silicon nitride thin films have been grown by pulsed laser deposition (PLD) of various carbon silicon nitride targets by using an additional nitrogen RF plasma source on [100] oriented silicon substrates at room temperature. The influence of the number of laser shots per target site on the growth rate and film surface morphology was studied. Up to about 30 at. % nitrogen and up to 20 at. % silicon were found in the films by Rutherford backscattering spectroscopy (RBS) and X-ray photoelectron spectroscopy (XPS). The XPS of the films showed a clear correlation of binding energy to the variation of PLD parameters. The films show a universal hardness value up to 23 GPa (reference value for silicon substrate 14 GPa) in dependence on target composition and PLD parameters. The results emphasise the possibility of variation of chemical bonding and corresponding properties, such as nanohardness, of amorphous CSi_xN_y thin films by the plasma-assisted PLD process.     

Study of pulsed laser deposition of RuO2 and SrRuO3 thin films

In this study, the pulsed laser ablation of RuO₂ and SrRuO₃ (SRO) is investigated by observing the fluorescence from excited atoms in the plume by using a framing streak camera. Vaporization, phase explosion and boiling are suggested to play the main roles in the processes for the interaction between the laser beam and target. Collisions and adiabatic expansion are also suggested before particles move forward with shifted Maxwellian spatial distribution. In O₂ pressure, numerous collisions between fast and slow atoms occur and result in the exchange of speeds. The structural and electrical (conductivity and work-function) properties of RuO₂ and SRO thin films are measured. Epitaxial SRO growth was obtained at growth temperatures down to 350 °C. Ferroelectric and high- dielectric thin-film capacitors with RuO₂ or SRO thin film electrode are also studied.     

Growth of SiNx and SiCx thin films by pulsed reactive crossed-beam laser ablation

SiN_x and SiC_x films were grown on Si(001) and Si(111) using pulsed reactive crossed-beam laser ablation of Si with N₂ and CH₄. The scattering processes in the ablation plasma and the reactive gas pulse were investigated using time-of-flight quadrupole mass spectroscopy. The film crystallinity was determined by FTIR spectroscopy, X-ray diffraction, and reflection high-energy electron diffraction, while the stoichiometry and chemistry were investigated using XPS. SiN_x was amorphous over the investigated temperature range of 25-850 °C, and x increased monotonically with temperature from 0.67 to 0.94. SiC_x films grown at 850 °C consisted of oriented large #-SiC crystallites embedded in a Si matrix.     

Determining the properties of pulsed laser deposited thin films by controlling the kinetic energy of the film-forming particles

The deposition of Al₂O₃ thin films by pulsed KrF excimer laser radiation (248 nm) on fused silica substrates is investigated as a function of the processing variables: laser fluence, processing gas pressure and target-to-substrate distance. The kinetic energy of the Al species in the laser-generated plasma, as measured by time-of-flight optical emission spectroscopy and time-of-flight quadrupole mass spectrometry, is described as a function of the type and pressure of the processing gas, the distance from target, and the laser fluence. The influence of the kinetic energy of the film-forming particles on the density and the refractive index of the resulting films, determined by ellipsometry, is investigated. The densification of the Al₂O₃ thin films to 94% of the bulk value is achieved by film-forming Al particles impinging on the growing surface with mean kinetic energies of about 25 eV.     

Pulsed laser deposition of chromium-doped zinc selenide thin films for mid-infrared applications

We have grown Cr doped ZnSe thin films by pulsed laser deposition on GaAs, sapphire and Si substrates through KrF excimer laser ablation of hot-pressed targets containing appropriate stoichiometric mixtures of Zn, Se, and Cr species and hot-pressed ceramic targets made of ZnSe and CrSe powders in vacuum and in an He background environment (10^-4 Torr). Deposited films were analyzed using X-ray diffraction to determine crystallinity and energy dispersive X-ray fluorescence to confirm Cr incorporation into the films. Photoluminescence measurements on the films show intracenter Cr²⁺ emission in the technologically important 2–2.6 μm spectral range. PACS 78.66.hf; 78.66.-w; 78.55.-m; 78.66.Bz; 78.20.-e     

Growth of oriented Pb(ZrxTi1-x)O3 thin films on glass substrates by pulsed laser deposition

Oriented crystalline Pb(Zr_xTi_1-x)O₃ (x=0.53) (PZT) thin films were deposited on metallized glass substrates by pulsed laser deposition (1060-nm wavelength Nd:YAG laser light, 10-ns pulse duration, 10-Hz repetition rate, 0.35-J/pulse and 25-J/cm² laser fluence), from a commercial target at substrate temperatures in the range 380-400 °C. Thin films of 1-3 7m were grown on Au(111)/ Pt/NiCr/glass substrates with a rate of about 1 Å/pulse on an area of 1 cm². The deposited PZT films with perovskite structure were oriented along the (111) direction, as was revealed from X-ray diffraction spectra. Fourier transform infrared spectroscopy (FTIR) was performed on different PZT films so that their vibrational modes could be determined. Piezoelectric d₃₃ coefficients up to 30 pC/N were obtained on as-deposited films. Ferroelectric hysteresis loops at 100 Hz revealed a remanent polarization of 20 7C/cm² and a coercive field of 100 kV/cm.     

掺杂BaTiO3/SrTiO3多层膜与太赫兹波相互作用

掺杂半导体中的载流子吸收在THz波段非常明显,其相互作用研究是研制THz通信中的关键器件之一的基础。采用氟化氪（KrF）脉冲准分子激光烧蚀沉积（PLD）技术,制备了Ni掺杂BaTiO3/SrTiO3多层膜。基于辐射频率为3.09 THz、脉冲功率为10 mW量级的THz 量子级联激光器(QCL)光源研究了太赫兹波在Ni掺杂BaTiO3/SrTiO3多层膜中的传输,发现损耗主要是Ni颗粒的非共振吸收导致。     

Si nanocrystallites in SiO2 with intense visible photoluminescence synthesized from SiOx films deposited by laser ablation

We observed very intense and highly reproducible photoluminescence (PL) spectra for SiO_x films obtained by laser ablation of Si targets in 50-mTorr oxygen gas followed by proper annealing. It was found that the PL peak continuously changes from 1.4 eV at the center of the samples to 1.8 eV at the sample edge. The optimum values of the oxygen component in SiO_x was x=1.3-1.4 and the optimum annealing temperature was 1000 °C for intense PL. From transmission electron microscopy images of annealed films, Si nanocrystallites are found to be formed in the matrix of SiO₂ grown from the SiO_x and have diameters of 2-3 nm. These indicate that a high density of Si nanocrystallites with diameters of 2-3 nm in the SiO₂ phase are probably responsible for the PL and that the Si nanostructure is well formed from the as-deposited, metastable SiO_x (x=1.3-1.4) films by annealing at 1000 °C.     

Cubic boron nitride deposition on silicon substrates at room temperature by KrF excimer laser ablation of h-BN

A hexagonal-BN target was ablated by high-fluence (6 and 12 J/cm²) KrF excimer laser pulses in low-pressure (5 Pa) N₂ atmosphere, without any aid of ion bombardment and heating of the Si substrate. Investigations of the deposited films show that the cubic-BN phase was deposited. The film deposited at 6 J/cm² appears to contain a higher cubic phase content with respect to the one deposited at 12 J/cm².     

Properties of pulsed laser deposited nanocomposite NiO:Au thin films for gas sensing applications

Nanocomposite thin films formed by gold nanoparticles embedded in a nickel oxide matrix have been synthesized by a new variation of the pulsed laser deposition technique. Two actively synchronized laser sources, a KrF excimer laser at 248 nm and an Nd:YAG laser at 355 nm, were used for the simultaneous ablation of nickel and gold targets in oxygen ambient. The structural, morphological, and electrical properties of the obtained nanocomposite films were investigated in relation to the fluence of the laser irradiating the gold target. The nanocomposite thin films were tested as electrochemical hydrogen sensors. It was found that the addition of the gold nanoparticles increased the sensor sensitivity significantly.     

Structural and electrical properties of La0.5Sr0.5CoO3 films on SrTiO3 and porous a-Al2O3 substrates

Films of La_0.5Sr_0.5CoO₃ (LSCO) have been deposited on specially treated TiO₂-terminated (001) SrTiO₃ substrate surfaces and on macroporous polycrystalline !-Al₂O₃ substrates, having a mean pore diameter of 80 nm, by pulsed laser deposition. The films deposited on SrTiO₃ are good conducting, (001) textured, and exceptionally smooth (1-2 Å for 100 nm thick films). LSCO films deposited on porous !-Al₂O₃ are polycrystalline and exhibit good crystallographic and electrical properties despite the large substrate roughness and the differences in lattice parameters and crystal structure between the film and the substrate. Different growth modes have been observed on the porous !-Al₂O₃ substrates depending on the oxygen pressure during film deposition. Films grown at an oxygen pressure of 10^-1 mbar are macroporous, whereas films grown at 10^-2 mbar completely cover the substrate pores. In the latter case, strain effects lead to film cracking.     

Ta2O5 thin-films deposited by off-axis and on-axis pulsed laser deposition techniques

The crystalline properties of Ta₂O₅ thin films deposited by an off-axis aperture-installation-type pulsed laser deposition technique are investigated and the results are compared with the results for films deposited by the conventional on-axis technique. No significant difference in the substrate temperature dependence is seen between films deposited on-axis or off-axis at a pulse repetition frequency of 30 Hz. When the repetition frequency is lowered, the degree of c-axis orientation is increased in both films. This tendency is more pronounced in the off-axis films. Therefore it is found that the off-axis aperture-installation-type pulsed laser deposition technique is effective not only for decreasing the density of droplets, but also for obtaining more highly c-axis-oriented crystalline films.     

KrF pulsed laser deposition of La5Ca9Cu24O41 thin films on various substrates

Recent studies on single crystals of cuprate oxides containing spin chains and ladders have reported large anisotropic magnon-mediated thermal conductivity. A potential use of thin films of such materials could be in the thermal management of electronic devices for the guiding of unwanted heat to a heat sink. In this article, the pulsed laser deposition and characterization of La₅Ca₉Cu₂₄O₄₁ thin films on SrLaAlO₄, SrTiO₃, MgO, and Si substrates are reported for the first time. The films were grown using a pulsed UV laser (KrF, 248 nm) and various substrate temperatures up to 650 °C. The XRD spectra revealed successful target-film stoichiometric transfer and high texturing of the thin films with (0 k 0) preferred orientation.     

Surface characterization and luminescent properties of SrAl2O4:Eu,Dy nano thin films

SrAl₂O₄:Eu²⁺, Dy³⁺ thin films were grown on Si (1 0 0) substrates in different atmospheres using the pulsed laser deposition (PLD) technique. The effects of vacuum, oxygen (O₂) and argon (Ar) deposition atmospheres on the structural, morphological and photoluminescence (PL) properties of the films were investigated. The films were ablated using a 248 nm KrF excimer laser. Improved PL intensities were obtained from the unannealed films prepared in Ar and O₂ atmospheres compared to those prepared in vacuum. A stable green emission peak at 520 nm, attributed to 4f⁶5d¹→4f⁷ Eu²⁺ transitions was obtained. After annealing the films prepared in vacuum at 800 °C for 2 h, the intensity of the green emission (520 nm) of the thin film increased considerably. The amorphous thin film was crystalline after the annealing process. The diffusion of adventitious C into the nanostructured layers deposited in the Ar and O₂ atmospheres was most probably responsible for the quenching of the PL intensity after annealing.     

Measurement and Analysis of Composition and Depth Profile of H in Amorphous Si1-xCx:H Films

Composition in amorphous Si1-xCx：H heteroepitaxial thin films on Si （100） by plasma enhanced chemical vapour deposition （PECVD） is analysed. The unknown x （0.45-3.57） and the depth profile of hydrogen in the thin films are characterized by Rutherford backscattering spectrum （RBS）, resonance-nuclear reaction analysis （R-NRA） and elastic recoil detection （ERD）, respectively. In addition, the depth profile of hydrogen in the unannealed thin films is compared to that of the annealed thin films with rapid thermal annealing （RTA） or laser spike annealing （LSA） in nitrogen atmosphere. The results indicate that the stoichiometric amorphous SiC can be produced by PECVD when the ratio of CH4/SiH4 is approximately equal to 25. The content of hydrogen decreases suddenly from 35% to 1% after 1150℃ annealing. RTA can reduce hydrogen in SiC films effectively than LSA.