Effect of the rutile content on the photovoltaic performance of the dye-sensitized solar cells composed of mixed-phase TiO2 photoelectrodes

The effect of the rutile content on the photovoltaic performance of dye-sensitized solar cells (DSSCs) composed of mixed-phase TiO(2) photoelectrode has been investigated. The mixed-phase TiO(2) particles with varied amounts of rutile, relative to anatase phase, are synthesized by an in situ method where the concentration of sulfate ion is used as a phase-controlling parameter in the formation of TiO(2) using TiCl(4) hydrolysis. The surface area (S(BET)) varies from 33 (pure rutile) to 165 (pure anatase) m(2) g(-1). Generally, both the current density (J(sc)) and photo-conversion efficiency (η) decrease as the rutile content increases. The incorporation of rod-shaped rutile particles causes low uptake of dye due to the reduced surface area, as well as slow electron transport in less efficiently-stacked structure. However, maximum J(sc) (14.63 mA cm(-2)) and η (8.69%) appear when relatively low rutile content (16%) is employed. The reported synergistic effect by the efficient interparticle electron transport from rutile to anatase seems to overbalance the decrease of surface area when small amount of rutile particles is incorporated.     

表面相结结构在促进光催化电荷分离中的应用

二十世纪八十年代以来,特别是近十年,光催化研究在利用可再生能源太阳能的道路上飞速发展。越来越多的研究表明,相结结构的构筑是有效提高半导体光催化剂性能的重要策略。其中, TiO2作为重要的模型光催化剂,其相关研究成果呈现出指数增长的趋势。本综述围绕TiO2模型光催化剂,主要介绍TiO2表面相结的研究成果,包括TiO2表面相的表征、锐钛矿：金红石TiO2相结用于光催化产氢研究、TiO2相结在光催化中作用的最新认识等。在表征方面,通过表面灵敏的紫外拉曼光谱研究了TiO2相变过程中表面相结构的变化,结合可见拉曼以及XRD表征揭示了TiO2独特的相变过程,即相变始于锐钛矿粒子的界面处,小粒子逐渐团聚为大粒子,致其相变从大粒子体相开始最终扩展到整个粒子。使用CO, CO2探针红外光谱,根据锐钛矿和金红石表面吸附物种的差异,进一步证实了锐钛矿：金红石表面相结结构,为紫外拉曼光谱的表面表征特性提供坚实证据。同时,利用发光光谱观察到锐钛矿晶相的可见发光带和金红石晶相的近红外发光带,并基于此给出了TiO2材料表面相结结构的荧光表征新方法。此外荧光光谱还提供了锐钛矿、金红石相中载流子动力学信息,揭示了束缚态在光催化中的作用。在光催化应用方面,观察到混相结构TiO2较单独锐钛矿及金红石相具有更高的光催化产氢活性,通过在较大金红石颗粒上担载纳米锐钛矿粒子,证明了相结结构在提高光催化活性中的核心作用,并首次提出了锐钛矿：金红石表面异相结结构概念,推断其对电荷分离的促进作用是最终提高反应活性的原因。之后将此概念应用到改善商品TiO2(P25)光催化活性中,通过可控热处理精细调控P25的表面相结构,在光催化重整生物质衍生物产氢实验中,成功将P25光催化产氢活性提高3?5倍。之后发展了新的TiO2表面控制方法,通过加入Na2SO4等相变控制剂,延缓了TiO2从锐钛矿向金红石的相变过程,在较高温度下实现TiO2相结结构的调控,最终可将P25光催化重整甲醇制氢的活性提高6倍,同时通过高分辨电镜清晰观察到锐钛矿：金红石相结的原子层生长接触。在相结作用机理方面,多种时间分辨光谱技术以及理论计算被用作探索锐钛矿：金红石相结处的电子转移机理。通过时间分辨红外光谱对TiO2表面相结结构作用的研究,特别是利用锐钛矿、金红石不同的瞬态吸收光谱特征,证明了锐钛矿：金红石相结处的载流子转移过程,存在锐钛矿向金红石的电子转移过程。模型光催化剂TiO2相结的研究成果,加深了对光催化机理的认识,促进新型高效光催化体系的设计合成。     

Rutile TiO2 nanowires on anatase TiO2 nanofibers: a branched heterostructured photocatalysts via interface-assisted fabrication approach

A water-dichloromethane interface-assisted hydrothermal method was employed to grow rutile TiO(2) nanowires (NWs) on electrospun anatase TiO(2) nanofibers (NFs), using highly reactive TiCl(4) as precursor. The water-dichloromethane interface inhibited the formation of rutile NWs in water phase, but promoted the selective radial growth of densely packed rutile NWs on anatase NFs to form a branched heterojunction. The density and length of rutile NWs could be readily controlled by varying reaction parameters. A formation mechanism for the branched heterojunction was proposed which involved (1) the entrapment of rutile precursor nanoparticles at water-dichloromethane interface, (2) the growth of rutile NWs on anatase NFs via Ostwald ripening through the scavengering of interface-entrapped rutile nanoparticles. The heterojunction formed at anatase NF and rutile NW enhanced the charge separation of both under ultraviolet excitation, as evidenced by photoluminescence and surface photovoltage spectra. The branched TiO(2) heterostructures showed higher photocatalytic activity in degradation of rodamine B dye solution than anatase NFs, and the mixture of anatase NFs, and P25 powders, which was discussed in terms of the synergistic effect of enhanced charge separation by anatase-rutile heterojunction, high activity of rutile NWs, and increased specific area of branched heterostructures.     

The important role of tetrahedral Ti4+ sites in the phase transformation and photocatalytic activity of TiO2 nanocomposites

Highly photoactive, tetrahedral Ti4+ sites can be created, other than in zeolite cavities and on silica substrate, in mixed-phase TiO2 nanocomposites. The tetrahedral Ti4+ species was shown to be an intermediate formed during the thermally driven phase transformation from anatase to rutile.     

Microwave-solvothermal synthesis of various polymorphs of nanostructured TiO2 in different alcohol media and their lithium ion storage properties

The various polymorphs (anatase, rutile, and brookite) of TiO(2) with different nanomorphologies have been synthesized by a facile microwave-assisted solvothermal process without surfactants, employing TiCl(4) or TiCl(3) as precursors in various alcohol (ethanol, propanol, butanol, and octanol) media. The samples have been characterized by X-ray diffraction (XRD), electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis. The Ti/Cl ion concentration, reaction pH, and size of the alcohol molecule are found to control the morphology, crystal structure, and crystallite size of the TiO(2) particles. Among the various TiO(2) polymorphs synthesized, the rutile TiO(2) spheres built up of nanorods that were synthesized with TiCl(4) in octanol have an average pore size and surface area of, respectively, 5 nm and 404 m(2)/g and exhibit the best electrochemical performance with a capacity of >200 mAh/g after 100 cycles and high rate capability. The excellent electrochemical properties originate from the nanorod-building morphology and mesoporosity of TiO(2) spheres that provide good electrical contact, accommodates the strain smoothly, and facilitates facile lithium-ion diffusion.     

UV Raman spectroscopic study on TiO2. I. Phase transformation at the surface and in the bulk

Phase transformation of TiO2 from anatase to rutile is studied by UV Raman spectroscopy excited by 325 and 244 nm lasers, visible Raman spectroscopy excited by 532 nm laser, X-ray diffraction (XRD), and transmission electron microscopy (TEM). UV Raman spectroscopy is found to be more sensitive to the surface region of TiO2 than visible Raman spectroscopy and XRD because TiO2 strongly absorbs UV light. The anatase phase is detected by UV Raman spectroscopy for the sample calcined at higher temperatures than when it is detected by visible Raman spectroscopy and XRD. The inconsistency in the results from the above three techniques suggests that the anatase phase of TiO2 at the surface region can remain at relatively higher calcination temperatures than that in the bulk during the phase transformation. The TEM results show that small particles agglomerate into big particles when the TiO2 sample is calcined at elevated temperatures and the agglomeration of the TiO2 particles is along with the phase transformation from anatase to rutile. It is suggested that the rutile phase starts to form at the interfaces between the anatase particles in the agglomerated TiO2 particles; namely, the anatase phase in the inner region of the agglomerated TiO2 particles turns out to change into the rutile phase more easily than that in the outer surface region of the agglomerated TiO2 particles. When the anatase particles of TiO2 are covered with highly dispersed La2O3, the phase transformation in both the bulk and surface regions is significantly retarded, owing to avoiding direct contact of the anatase particles and occupying the surface defect sites of the anatase particles by La2O3.     

High-temperature stabilized anatase TiO2 from an aluminum-doped TiCl3 precursor

The solid-state hydrolysis and air calcination of aluminum-doped TiCl3 leads to crystalline anatase TiO2 that is stable on heating to 1000 degrees C, in contrast to control studies with related AlCl3 and TiCl3 physical mixtures that produce rutile TiO2 under the same conditions.     

纳米TiO2低温水解法的晶型控制合成及其表面织构的研究

分别以TiCl₄，Ti(NO₃)₄和Ti(SO₄)₂为前驱体，在低温和强酸性条件下，通过水解反应可控地合成了具有不同晶相组成，且比表面积较高的纳米TiO₂，并用XRD，TEM和N₂^-吸附脱附技术对其晶相、粒径大小、形貌及比表面积进行了表征。结果表明，钛离子在有Cl^-、NO₃^-存在的酸性溶液中水解，水解温度≤80 ℃，可以生成结晶良好的具有细小晶粒尺寸和较高比表面积的金红石型纳米TiO₂粉体，水解温度>80 ℃，反而有锐钛矿型TiO₂生成，而在有SO₄^2-存在的酸性溶液中，TiO₂样品的晶相组成不随水解温度的变化而改变，均为锐钛矿型，其比表面积可达300 m²·g^-1。     

Preparation and photoactivity of nanostructured anatase, rutile and brookite TiO2 thin films

Photoactive films consisting of pure anatase, brookite or rutile TiO2 were prepared by dip coating from water dispersions obtained by using TiCl4 as the precursor under similar mild experimental conditions.     

Recombination pathways in the Degussa P25 formulation of TiO2: surface versus lattice mechanisms

Charge migration between electron trapping sites within the mixed-phase titania photocatalyst Degussa P25 has been studied. In addition to previously described lattice electron trapping sites on both anatase and rutile phases, surface electron trapping sites and an anatase-rutile interface trapping site specific to Degussa P25 are identified. The relationship between these sites and recombination with surface hole trapping sites is also determined. It is experimentally shown that upon band-gap illumination holes appear at the surface and preferentially recombine with electrons in surface trapping sites. These findings indicate that in mixed-phase TiO2, such as Degussa P25, photogenerated holes are trapped exclusively on the particle surface, while photogenerated electrons are trapped within the nanoparticle lattice. Recombination reactions are dominated by surface reactions that follow charge migration. These findings indicate that, in mixed-phase TiO(2), such as Degussa P25, a random flight mechanism of recombination predominates. Such knowledge simplifies the mechanistic mathematical models used for process design and points the way for improving future oxidative titania catalysts.     

EPR investigation of TiO2 nanoparticles with temperature-dependent properties

An in situ electron paramagnetic resonance (EPR) study has been carried out for anatase (Hombikat UV100) and rutile TiO(2) nanoparticles at liquid helium (He) temperature (4.2 K) under UV irradiation. Rutile titania was synthesized by ultrasonic irradiation with titanium tetrachloride (TiCl(4)) as the precursor. XRD and Raman results evidence the crystallinity of titania phases. The nature of trapped electrons and holes has been investigated by EPR spectroscopy under air and vacuum conditions. Illumination of TiO(2) powder (anatase and rutile) at 4.2 K resulted in the detection of electrons being trapped at Ti(4+) sites within the bulk and holes trapped at lattice oxide ions at the surface. The stability of electron traps was very sensitive to temperature in both phases of TiO(2). The annealing kinetics of the EPR detected radicals has been studied from 4.2 K to ambient temperature and also for calcined titania particles from 523 to 1273 K.     

二氧化钛纳米微粒的制备与光催化活性

本文采用溶液－凝胶法制备了粒径为１０－２０ｎｍ左右的二氧化钛纳米微粒。用ＸＲＤ研究了二氧化钛溶胶的热处理过程,研究表明温度在４７３Ｋ－６７３Ｋ左右ＴｉＯ２向量 粒呈不规整锐钛矿结构,粒径约为１０－２０ｎｍ。在８７３Ｋ左右ＴｉＯ２微粒出现锐钛矿与金红石型混晶结构。     

Photoluminescence of anatase and rutile TiO2 particles

Nonaqueous reactions between titanium(IV) chloride and alcohols (benzyl alcohol or n-butanol) were used for the synthesis of anatase TiO2 particles, while rutile TiO2 particles were synthesized in aqueous media by acidic hydrolysis of titanium(IV) chloride. The X-ray diffraction measurements proved the exclusive presence of either the anatase or the rutile phase in prepared samples. The photoluminescence of both kinds of particles (anatase and rutile) with several well-resolved peaks extending in the visible spectral region was observed, and the quantum yield at room temperature was found to be 0.25%. Photon energy up-conversion from colloidal anatase and rutile TiO2 particles was observed at low excitation intensities. The energy of up-converted photoluminescence spans the range of emission of normal photoluminescence. The explanation of photon energy up-conversion involves mid-gap energy levels originating from oxygen vacancies.     

Single-phase titania nanocrystallites and nanofibers from titanium tetrachloride in acetone and other ketones

Single-phase titania nanomaterials were prepared by autoclaving titanium tetrachloride in acetone at 80-140 degrees C. Depending on the molar ratio of TiCl4 to acetone (TiCl4/Ac), TiO2 materials with different phases and morphologies were obtained. When the TiCl4 concentration was no higher than TiCl4/Ac=1/15, single-phase anatase TiO2 nanocrystals in sizes ranging from 4 to 10 nm were prepared by tuning TiCl4/Ac ratios from 1/90 to 1/15. However, when the TiCl4 concentration was high enough (e.g., TiCl4/Ac>or=1/10), single-phase rutile TiO2 nanofibers were obtained selectively. The materials were characterized comprehensively using X-ray diffraction, transmission electron microscopy, Raman spectroscopy, thermogravimetric analysis, and nitrogen adsorption measurements. With the aid of GC/MS analysis of organic products in the liquid phase, it is shown that the controlled hydrolysis of TiCl4 with water, which was in situ generated from the TiCl4-catalyzed aldol condensation reactions of acetones, played an important role in the formation of the titania nanomaterials. Some of the organic condensates may function to stabilize the phase and morphology of the materials. This mechanism was also supported by our success in using other ketones as alternatives to acetone in the synthesis.     

Dispersion behaviors of molybdena on titania (rutile and/or anatase)

Raman and FT-IR spectra were employed to investigate the dispersion of molybdena on mixed TiO2 (rutile and anatase, signed as R and A) with different BET surface ratios of rutile/TiO2(R + A). The results showed that (1) molybdena would preferentially disperse on the rutile surface in mixed TiO2; (2) for MoO3/rutile with low molybdena loading (e.g., 0.20 mmol/100 m2 rutile), a dispersed molybdena species existed on the rutile surface in an isolated tetrahedral coordination environment, while for MoO3/rutile with high molybdena loading (e.g. 0.82 mmol/100 m2 rutile), a polymeric molybdena species could be detected on the rutile surface; (3) for the MoO3/anatase sample, a dispersed molybdena species existed on the anatase surface in a polymeric coordination environment; and (4) the formation of the Bronsted acid site on the surface of rutile and anatase should be related to the polymeric molybdena species. All these results have been discussed via the interaction between OH groups of molybdena and OH groups of rutile and anatase, and it seems reasonable to suggest that, for the lower molybdena loading, the different states of the dispersed molybdena species should result from the different dehydration orders of OH groups of the molybdena and surface OH groups of rutile and anatase.     

Synthesis of efficient N-containing TiO2 photocatalysts with high anatase thermal stability and the effects of the nitrogen residue on the photoinduced charge separation

Efficient N-containing TiO(2) nanoparticles with high anatase thermal stability were synthesized via a hexamethylenetetramine (HMT)-modified sol-hydrothermal process. The results showed that modification with proper amounts of HMT is effective in increasing the onset temperature of the phase transformation of TiO(2) from anatase to rutile. The enhancement of the anatase thermal stability of the modified TiO(2) was attributed to ammonia produced slowly by hydrolysis of the HMT molecules in the sol-hydrothermal process and, additionally, to the residual nitrogen species after the thermal treatment at high temperatures, as indicated by the XPS examination. Compared with the unmodified TiO(2), the modified TiO(2) obtained by a thermal treatment at high temperatures exhibited good photocatalytic performance under UV light and was found to even be superior to the commercially available P25-TiO(2). It was suggested that the residual N species (Ti-O-N), formed after the thermal treatment at high temperatures, along with the mixed phase composition, large surface area and the increase in the thermal stability, were responsible for the enhanced photocatalytic activity of modified TiO(2). It was demonstrated, by means of the surface photovoltage responses of the modified TiO(2) in different atmospheres along with the aid of an outer electric field, that the residual N species could effectively capture the photoinduced holes, which was favorable for the effective separation of the photoinduced charges. This work provides a feasible route to fabricate high-performance TiO(2)-based functional nanomaterials with high anatase thermal stability.     

Adsorption configurations and energetics of BClx (x=0-3) on TiO2 anatase (101) and rutile (110) surfaces

This study investigates the adsorption and reactions of boron trichloride and its fragments (BClx) on the TiO2 anatase (101) and rutile (110) surfaces by first-principles calculations. The results show that the possible absorbates on the TiO2 anatase and rutile surfaces are very similar. The single- and double-site adsorption configurations are found for both anatase and rutile surfaces. The particular adsorbate feature on the anatase surface is its in-plane double-site adsorption by Ti and O from its sawtooth surface. The potential energy surface shows that BCl3 can be adsorbed on the O site for both the anantase and rutile surfaces and the most of the BClx reaction on both anatase and rutile surfaces are endothermic, except for the dissociative reaction on the rutile surface. The energy levels of the BClx reactions between the anatase and rutile surfaces show that the rutile surface has lower energy levels than those of anatase surface. This result reveals that the BClx dissociative adsorption more easily occurs on rutile surface than on anatase surface.     

The role of crystal phase in determining photocatalytic activity of nitrogen doped TiO2

Two series of nitrogen doped TiO(2) samples with different ratios of anatase to rutile phases were prepared by milling the mixture of P25 TiO(2) and C(6)H(12)N(4) in air and gaseous NH(3) atmosphere, respectively. Compared to air, NH(3) atmosphere plays an important role in delaying the crystallite transformation from anatase to rutile in the mechanochemical reaction of TiO(2) and C(6)H(12)N(4). In contrast to the previously reported results for pure TiO(2), it is found that nitrogen doped TiO(2) with higher content of rutile phase demonstrates higher photocatalytic activity in photodegrading pollutant Rhodamine B under both UV light and visible light irradiation (lambda>420 nm), and the amount of the surface-adsorbed water and hydroxyl groups on nitrogen doped TiO(2) have little correlations with their crystallite phases (anatase or rutile) and photocatalytic activity. The more abundant surface states characterized by photoluminescence spectroscopy together with the lowered valence band maximum of rutile TiO(2) by nitrogen doping are considered as the key factors for the higher activity of nitrogen doped TiO(2) with higher content of rutile phase.     

TiCl4溶胶凝胶法制备TiO2纳米粉体

利用TiCl4的乙醇溶液作为前驱体 ,运用溶胶凝胶法制备了TiO2 纳米粉体 .研究结果表明 ,在TiCl4与乙醇混合成溶液的过程中 ,TiCl4即与乙醇及乙醇中的微量水发生醇解和部分水解脱氯反应形成钛酸酯 .在随后的成胶化过程中 ,则主要是钛酸酯吸收气氛中的水气 ,脱去乙醇基形成Ti-OH键并发生缩脱水聚合形成无机聚合物溶胶 .增加成胶化时间 ,可以促进乙醇基的脱去和无机聚合物的形成 ,促进锐钛矿TiO2 纳米颗粒的形成     

Preparation of controllable crystalline titania and study on the photocatalytic properties

Nanocrystalline TiO(2) catalysts with different anatase/rutile ratios and high surface area (113-169 m(2)/g) have been prepared at low temperature by the microemulsion-mediated hydrothermal method. The samples were characterized by x-ray diffraction (XRD), Fourier transform (FT)-IR spectra, UV-vis diffuse reflectance spectra, and nitrogen adsorption-desorption methods. The contents of anatase and rutile phases in the TiO(2) powders have been successfully controlled by simply changing the proportion of Cl(-) and SO(4)(2-) in the aqueous phase of the microemulsion. A proposed mechanism involving bidentately chelated sulfate is discussed to explain the variation of the crystalline phase in the TiO(2) powder. The photodegradation of methyl orange (MO) in water has been investigated over titanium dioxide consisting of different anatase/rutile ratios. The catalyst containing 74.2% anatase showed the highest photocatalytic activity, which is due to a synergistic effect between anatase and rutile. The synergism was also found for the photodegradation of MO with physically mixed anatase and rutile as catalysts.