Aqueous latex/ceramic nanoparticle dispersions: colloidal stability and coating properties

The effect of pH on the colloidal stability of aqueous dispersions containing antimony-doped tin oxide (ATO) or indium tin oxide (ITO) nanoparticles and poly(vinyl acetate-acrylic) copolymer (PVAc-co-acrylic) latex particles was investigated using experimental observations and Derjiaguin, Landau, Verwey and Overbeek (DLVO) theory. The microstructure, electrical properties and optical properties of composite coatings prepared from various dispersions were also studied. Zeta potential measurements revealed that the isoelectric point (IEP) of ATO nanoparticles was below pH 2.0, that of ITO nanoparticles was at pH approximately 6.0 and that of PVAc-co-acrylic latex was at pH approximately 2.0. ATO/PVAc-co-acrylic dispersions prepared at pH 3 were stable, but those prepared at pH 1.5 formed aggregates, which settled quickly with time. DLVO theory predictions are in accord with these results. Stable ITO/PVAc-co-acrylic dispersions are obtained at a pH of 3.0 and 11.0, but dispersions are not stable at a pH of 6.0, the IEP of ITO. At a pH of 3.0, DLVO results predict attraction between ITO particles and latex particles. Dispersion pH affected the microstructures and properties of ATO (or ITO)/PVAc-co-acrylic coatings. Suspensions that formed aggregates produced coatings with lower percolation thresholds and lower transparencies than those produced from stable suspensions.     

Ceramic nanoparticle/monodisperse latex coatings

Ceramic nanoparticle/monodisperse latex coatings with a nanoparticle-rich surface and a latex-rich body were created by depositing aqueous dispersions of monodisperse latex, approximately 550 nm in diameter, and nanosized ceramic particles onto substrates and drying. On the top surface of the dried coating, the latex particles are closely packed with nanoparticles uniformly occupying the interstitial spaces, and along the cross section, nanoparticles fill the spaces between the latex particles in the near surface region; a compacted latex structure, nearly devoid of nanoparticles, lies beneath. Cryogenic scanning electron microscopy images of partially dried coatings at successive drying stages reveal two important steps in forming this structure: top-down consolidation of latex particles and accumulation of nanoparticles in interstitial spaces among latex particles near the surface. A systematic study of the effect of processing conditions, including nanoparticle concentration, nanoparticle size, latex glass transition temperature, and drying conditions, on the final microstructure was carried out. The unique microstructure described above forms when the monodisperse latex is large enough to create pore channels for the transport of nanosized particles and the drying conditions favor "top-down" as opposed to "edge-in" drying.     

Electrical and optical properties of ceramic–polymer nanocomposite coatings

Transparent, conductive composite coatings were fabricated from suspensions of poly(vinyl acetate‐acrylic) (PVAc‐co‐acrylic) copolymer latices (50–600 nm) and nanosized antimony‐doped tin oxide (ATO) particles (～15 nm). The suspensions were deposited as coatings onto poly(ethylene terephthalate) substrates and dried at 50 °C. Microstructure studies using field emission scanning electron microscopy and tapping‐mode atomic force microscopy (TMAFM) indicated that the latex particles coalesced during drying and forced the ATO particles to segregate into the boundaries between the latex particles. Low phase contrast was observed with TMAFM; this result was consistent with the presence of PVAc‐co‐acrylic in the ATO‐rich phase of the composite. The conductivity of the composite coatings followed a percolation power‐law equation, with the percolation threshold between 0.05 and 0.075 volume fractions of ATO and the critical conductivity exponent ranging from 1.34 to 2.32. The highest direct‐current conductivity of the composite coatings was around 10^?2 S/cm. The optical transmittance and scattering behavior of the coatings were also investigated. Compared with the PVAc‐co‐acrylic coating, the composite coatings had lower transparency because of the Rayleigh scattering. The transparency of the composite coatings was improved by a reduction in the coating thickness. The best transparency for the coatings with a direct‐current conductivity of approximately 10^?2 S/cm was around 85% at a wavelength of 600 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1744–1761, 2003     

Control of the electrical conductivity of composites of antimony doped tin oxide (ATO) nanoparticles and acrylate by grafting of 3-methacryloxypropyltrimethoxysilane (MPS)

The effect of the addition of antimony doped tin oxide (ATO) nanoparticles on the electrical conductivity of acrylate films is described. To enable dispersing of ATO in acrylate matrices, 3-methacryloxypropyltrimethoxysilane (MPS) was grafted on the surface of the filler. The amount of MPS used for this surface modification was found to strongly affect the electrical conductivity. Surface modification with a large amount of MPS resulted in colloidally stable dispersions of ATO, leading to a homogeneous distribution. Surface modification with small amounts of MPS led to instable ATO dispersions and aggregation of ATO into a fractal type network, which gives a much higher conductivity especially at low-volume fractions. For composites with a fractal type ATO network a second effect was found. Decreasing the amount of on ATO grafted MPS resulted in an increase of the electrical conduction between the ATO particles.     

Preparation of monomodal polyelectrolyte complex nanoparticles of PDADMAC/poly(maleic acid-alt-alpha-methylstyrene) by consecutive centrifugation

We report on the refinement of anionic and cationic nanoparticles of nonstoichometric polyelectrolyte complexes (PEC) by consecutive centrifugation, which was studied by dynamic light scattering (DLS), atomic force microscopy (AFM), colloid titration and infrared spectroscopy (IR). PEC dispersions were prepared by mixing poly(diallyldimethylammonium chloride) (PDADMAC) and sodium poly(maleic acid-alt-alpha-methylstyrene) (PMA-MS) at the monomolar mixing ratio of n-/n+ = 1.50 (anionic PEC) and 0.66 (cationic PEC), respectively, and the polymer concentration of c(POL) = 0.002 M. The particle size (Rh), titrable charge amount, and IR spectra were determined for both dispersions in the original state, after the first centrifugation and after the second centrifugation. Freshly prepared PEC dispersions contained two different particle sizes: around 10-25 nm (small particles) and around 100 nm (large particles). Consecutive centrifugation of freshly prepared PEC dispersions resulted in the separation of highly charged excess polyelectrolyte (PEL) and small PEC particles from a low charged coacervate phase of the desired larger PEC particles. After the second centrifugation, the coacervate phase of both dispersions PEC-1.50 and PEC-0.66 consisted of monomodal particles sizing around 100 nm. These results were supported by AFM measurements on the respective dispersions deposited on glass plates. PEC-1.50 particles tended to adopt slightly smaller sizes ( approximately 90 nm) in comparison to PEC-0.66 ones (approximately 110 nm). No significant influence of the PDADMAC molecular weight on the particle size was found. IR spectroscopy showed changes in the environment of the carboxylate groups of PMA-MS by consecutive centrifugation. The centrifuged PEC-1.50 dispersions showed remarkable long-term stability over more than a year. The high macroscopic stability of the studied PEC dispersions is presumably due to repulsive electrostatic interparticle interactions and attractive hydrophobic intraparticle interaction. The introduced monomodal PEC particles might be projected as latex analogues or as nanocarriers for drugs and proteins.     

Effect of an anionic monomer on the pickering emulsion polymerization stabilized by titania hydrosol

Polystyrene (PS) nanocomposite particles with high titania content are prepared by Pickering emulsion polymerization. A self‐made titania hydrosol modified by an anionic monomer sodium styrene sulfonate (NaSS) is used as a stabilizer and photocatalyst. The stability of the emulsion system is greatly improved by the electrostatic interaction between negatively charged NaSS and positively charged titania nanoparticles. The nanocomposite spheres with the diameter of around 120 nm are highly charged, indicating titania‐rich surfaces of latex particles. It is also proven by the field‐emission transmission electron microscope and field‐emission scanning electron microscope images. The well‐defined core‐shell structure of the obtained PS/titania composite particles is confirmed by the formation of fragile hollow titania nanospheres after thermogravimetric analysis tests. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5728–5736, 2009     

Geometrical and electrical properties of indium tin oxide clusters in ink dispersions

The analysis of the TEM images of indium tin oxide (ITO) clusters in ink solutions deposited from ink dispersions reveals that their geometry arises from a diffusion limited cluster aggregation (DLCA) process. We model films of ITO clusters as built through deposition of DLCA clusters made of primary spherical nanoparticles of 13 nm in diameter. The deposition is then followed by a further compactification process that imitates sintering. We determine the conductivity of the sintered films by mapping the problem to that of the resistor network in which the contact regions between the touching spheres provide the dominant electric resistance. For a given volume fraction, conductivity of the sintered films is shown to be larger than that for the randomly packed spheres. However, the larger a typical radius of gyration of the clusters the smaller the enhancement. We also provide numerical tests for the routines used in the interpretation of the TEM images.     

Particle interactions in kaolinite suspensions and corresponding aggregate structures

The surface charge densities of the silica face surface and the alumina face surface of kaolinite particles, recently determined from surface force measurements using atomic force microscopy, show a distinct dependence on the pH of the system. The silica face was found to be negatively charged at pH>4, whereas the alumina face surface was found to be positively charged at pH<6, and negatively charged at pH>8. The surface charge densities of the silica face and the alumina face were utilized in this study to determine the interaction energies between different surfaces of kaolinite particles. Results indicate that the silica face-alumina face interaction is dominant for kaolinite particle aggregation at low pH. This face-face association increases the stacking of kaolinite layers, and thereby promotes the edge-face (edge-silica face and edge-alumina face) and face-face (silica face-alumina face) associations with increasing pH, and hence the maximum shear-yield stress at pH 5-5.5. With further increase in pH, the face-face and edge-face association decreases due to increasing surface charge density on the silica face and the edge surfaces, and decreasing surface charge density on the alumina face. At high pH, all kaolinite surfaces become negatively charged, kaolinite particles are dispersed, and the suspension is stabilized. The face-face association at low pH has been confirmed from cryo-SEM images of kaolinite aggregates taken from suspension which show that the particles are mostly organized in a face-face and edge-face manner. At higher pH conditions, the cryo-SEM images of the kaolinite aggregates reveal a lower degree of consolidation and the edge-edge association is evident.     

New method for preparation of polyoxometalate-capped gold nanoparticles, and their assembly on an indium-doped tin oxide electrode

Functionalized gold nanoparticles capped with polyoxometalates were prepared by a simple photoreduction technique where phosphododecamolybdates serve as reducing reagents, photocatalysts, and as stabilizers. TEM images of the resulting gold nanoparticles show the particles to have a relative narrow size distribution. Monolayer and multilayer structures of the negatively charged capped gold nanoparticles were deposited on a poly(vinyl pyridine)-derivatized indium-doped tin oxide (ITO) electrode via the layer-by-layer technique. The surface plasmon resonance band of the gold nanoparticles displays a blue shift on the surface of the ITO electrode. This is due to the substrate-induced charge redistribution in the gold nanoparticles and a change in the electromagnetic coupling between the assembled nanoparticles. The modified electrode exhibits the characteristic electrochemical behavior of surface-confined phosphododecamolybdate and excellent electrocatalytic activity. The catalysis of the modified electrode towards the model compound iodate was systematically studied. The heterogeneous catalytic rate constant for the electrochemical reduction of iodate was determined by chronoamperometry to be ca. 1.34?×?10⁵ mol^?1·L·s^?1. The amperometric method gave a linear range from 2.5?×?10^?6 to 1.5?×?10^?3 M and a detection limit of 1.0?×?10^?6 M. We believe that the functionalized gold nanoparticles prepared by this photoreduction technique are advantageous in terms of fabrication of sensitive and stable redox electrodes.

Semiconductor nanoparticle/polystyrene latex composite materials

Cadmium sulfide and cadmium selenide/cadmium sulfide core/shell nanoparticles stabilized with poly(cysteine acrylamide) have been bound to polystyrene (PS) latexes by three methods. First, anionic 5 nm diameter CdS particles were electrostatically attached to 130 nm surfactant-free cationic PS latexes to form stable dispersions when the amount of CdS particles was less than 10% of the amount required to form a monolayer on the surface of the PS particles or when the amount of CdS particles exceeded the amount required to form a monolayer on the PS particles. Transmission electron microscopy (TEM) showed nanoparticles on the surface of the latex particles. Fluorescence spectra showed unchanged emission from the nanoparticles. Second, anionic, surfactant-free PS latexes were synthesized in the presence of CdS and CdSe/CdS nanoparticles. TEM showed monodisperse latex particles with trapped nanoparticles. Third, surfactant-stabilized latexes were synthesized by copolymerization of styrene with vinylbenzyl(trimethyl)ammonium chloride electrostatically bound to the CdSe/CdS nanoparticle surface. Brownian motion of the submicroscopic composite particles in water was detected by fluorescence microscopy.     

Sb掺杂SnO_2(ATO)纳米晶的水热合成和导电性能

以Sn和SbI_3为主要原料，在120-170 ℃温和水热条件下合成了具有导电能力 的Sb掺杂SnO_2(ATO)透明导电纳米粉体，运用FT-IR， XRD， BET， TEM等手段对 粉体的形成过程进行了分析表征。实验结果表明，所合成的纳米ATO粉体均为四方 锡石结构，无其他杂相存在，晶粒大小在4-7nm之间，粉体呈单分散状态。比表面 积在137-184m~2·g~(-1)之间，随水热温度的升高，晶粒长大，比表面积下降，粉 体导电性能提高。该方法对于其他透明导电氧化物纳米粉体的合成具有借鉴意义。     

Carbon ceramic nanoparticulate film electrode prepared from oppositely charged particles by layer-by-layer approach

Carbon ceramic nanoparticulate film electrode was prepared from negatively charged sulfonated carbon nanoparticles and positively charged silicate submicrometre particles with appended imidazolium groups. They were immobilized on an indium tin oxide surface by layer-by-layer method: alternative immersion into suspension of positive and negative particles. The film formation is confirmed by scanning electron microscopy – after larger number of immersion and withdrawal steps more material is deposited on the electrode substrate. The nanoparticulate film is stable and the obtained electrode exhibits a significant increase of capacitive current and faradaic current corresponding to hydrogen peroxide electroreduction. The effect of the number of immersion and withdrawal steps is strikingly visible on dioxygen bioelectrocatalytic reduction current after adsorption of the enzyme laccase.     

Nanoparticle‐Imprinted Polymers for Size‐Selective Recognition of Nanoparticles

Citrate‐stabilized gold nanoparticles 15 nm and 33 nm in diameter were transferred concomitantly with a monolayer of positively charged polyaniline by Langmuir–Blodgett transfer at pH 5 onto a conducting indium‐doped tin oxide (ITO) support. Films consisting of one to three layers of polyaniline with thicknesses of 1–3 nm were prepared and characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and X‐ray photoelectron spectroscopy. After electro‐oxidation of the Au nanoparticles in 0.1 M KCl, cavities were left behind in the film that could be analyzed by SEM. These cavities were able to recapture analyte nanoparticles from a solution of pH 10 and showed size‐exclusion properties. The amount of nanoparticles taken up by the cavities was conveniently analyzed by measuring the charge associated with the electro‐oxidation of these particles in 0.1 M KCl after the film had been rinsed with water. The size‐exclusion properties improved with the number of Langmuir–Blodgett layers transferred.     

Janus particles with a functional gold surface for control of surface plasmon resonance

We report in this study the presence of Janus particles, which are candidates for use with electronic color papers. We used negatively charged polystyrene particles (370 nm) as the core particles, and gold was then sputtered onto their packed monolayer under several conditions. The sputtered particles were next redispersed into the aqueous medium by gentle sonication. Gold nanoparticles localized on one side of the cores could also serve as seeds for subsequent shell growth by electroless gold plating. Through these treatments, a series of well-dispersed Janus particles were obtained with gold nanostructures of different size and shape only on one side. Their dispersions showed different colors originating from the surface plasmon resonance absorption of gold nanoparticles localized on the hemisphere. The particles obtained by this approach have potential applications such as in sensors and electronic color paper.     

Enhanced stabilization of emulsions due to surfactant-induced nanoparticle flocculation

We have shown recently (Binks, B. P.; Rodrigues, J. A.; Frith, W. J. Langmuir 2007, 23, 3626) that, for mixtures of negatively charged silica nanoparticles and cationic surfactant, oil-in-water emulsions are most stable to creaming and coalescence at conditions of maximum flocculation of particles by surfactant in aqueous dispersions alone. Here, we extend the idea using positively charged silica particles in mixtures with anionic surfactant.     

Interaction of pigments with polystyrene latex prepared using a zwitterionic emulsifier

An emulsion polymerization of styrene in the presence of a zwitterionic emulsifier,N,N-dimethyl-n-laurylbetaine (LNB), was carried out at pH 7.0. The stability of mixed dispersions composed of latex particles prepared with the emulsifier (LNB) and titanium dioxide particles was studied as a function of pH. The zeta potential of the synthesized latex particles was significantly dependent on the pH and showed the existence of an isoelectric point. In the pH range of 3.0–8.3, where the latices are positively charged while titanium dioxide pigment particles are negatively charged, the mixed suspensions of the latices and titanium dioxide particles were dispersed but exhibited heterocoagulation with increasing particle number of the latices. Furthermore, titanium dioxide particles were restabilized with further addition of the latices. The mechanisms of these processes are discussed. A similar experiment was conducted with silica particles.     

纳米氧化锡锑改性水性聚氨酯的制备与表征

以异佛尔酮二异氰酸酯(IPDI)、聚醚二醇（N-210）、二羟甲基丙酸（DMPA）、一缩二乙二醇（DEG）、三羟甲基丙烷（TMP）及纳米氧化锡锑（ATO）浆料为主要原料,制备了稳定的纳米ATO改性水性聚氨酯(APU)乳液。 粒径测试及透射电子显微镜（TEM）观察显示,纳米ATO在水性聚氨酯中分散较好,乳液粒径均小于100 nm; FTIR分析表明,纳米ATO粒子与水性聚氨酯(WPU)间可能存在化学键; 热重分析(TGA)测试显示,随纳米ATO添加量的增加,胶膜最大热分解温度逐渐提高,最大提高了约20 ℃;紫外-可见-近红外吸收及保温性能测试表明,随着纳米ATO添加量的提高,胶膜在800~2500 nm的透过率逐渐降低,但涂层在可见光区透过率均超过70%,热阻率由1.34×10-2 m2·℃/W提高至3.17×10-2 m2·℃/W。     

Application of fluorescence correlation spectroscopy: a study of flocculation of rigid rod-like biopolymer (schizophyllan) and colloidal particles

The flocculation between the rod-like biopolymer Schizophyllan and two types of colloidal particles (latex with diameter 40 nm and alumina with diameter 60 nm) has been investigated by means of fluorescence correlation spectroscopy (FCS). The concentration ratio of Schizophyllan/particle q was varied in the range 0.1 approximately 20. Under conditions of pH about 5.7, 1 mmol.L(-1) NaCl, and room temperature (22+/-0.5 degrees C), the particles are strongly charged (alumina particles positively charged, latex negatively), while Schizophyllan is neutral. We observed that Schizophyllan chains flocculate with both types of particles, which suggests that the charge neutralization does not play a decisive role in these interactions. The ratio of fluorescence intensity of one floc over that of one particle, Q(f)/Q(p), and the corresponding hydrodynamic radius (r(h)) of the flocs have been measured. For a Schizophyllan-latex system, Q(f)/Q(p) reached a maximum value of 5 for q=3 indicating that the flocs contained five particles on average. The corresponding value of r(h) was r(h)=455 nm. The flocculation kinetic of latex particles with Schizophyllan was too fast to be measurable by FCS. For the Schizophyllan-alumina system, Q(f)/Q(p) was stable at about 1 in the whole studied range of q but r(h) increased with q suggesting that many Schizophyllan chains are adsorbed on individual particles. The flocculation kinetic of this system was studied by FCS and the obtained results were compatible with those of photon correlation spectroscopy.     

环氧化物法制备锑掺杂氧化锡气凝胶

以无机金属盐为前驱体,采用环氧丙烷添加法结合CO2超临界流体干燥和热处理工艺,制备了不同锑掺杂浓度的二氧化锡(ATO)气凝胶.所得气凝胶为深蓝色块体,平均密度约为600 mg?cm-3,锑掺杂浓度在5%到20%(x)之间.电子显微镜图片显示ATO气凝胶的骨架由粒径约为数十纳米的颗粒堆积而成,而这些颗粒又由数纳米的初级球形颗粒构成.X射线衍射谱表明,样品的主要晶相为SnO2四方相金红石结构,锑的掺杂仅引起微小的晶格畸变.X射线光电子谱显示锡元素以+4价态存在,而锑则具有+3和+5的混合价态.四探针电阻率测试仪的结果表明,ATO气凝胶的电阻率在2.7-40Ω?cm之间变化,其中在锑掺杂浓度(x)为12%时具有最低电阻率.     

Quantification of microstructures in stable and gelated suspensions from Cryo-SEM

It is shown that the microstructures of concentrated suspensions can be analyzed in a quantitative way from cryo-SEM images of high-pressure frozen samples, both in the electrostatically stabilized and in the flocculated state. Suspensions of spherical silica particles (40 vol%) in an aqueous solution were used. The average particle radius was 525 nm with a polydispersity of below 7%. The suspensions were high-pressure frozen, which resulted in a quenching of the configuration without apparent change in volume or crack formation. After fracturing the samples at liquid nitrogen temperature, the fracture surface was etched by controlled sublimation of the frozen aqueous phase, coated with 8 nm of platinum, and examined by stereo-cryo-SEM. The 3-dimensional positions of all the visible particles were determined from the SEM images. Assuming an isotropic particle configuration in the sample before cracking, it is possible to extract the 3-dimensional pair correlation function from the particle positions on the fracture surface. A comparison to recent results from Brownian Dynamics simulations shows good agreement between our experiments and the simulations.