利用反射全息实现计算全息三维显示

计算全息和光学全息都可应用于三维显示,但各有自己的优势和缺陷.将计算全息和光学反射全息相结合,可以突破光学全息对记录物体的限制,进行虚拟物体或自然场景的全息图的制作,同时可以实现白光再现.本文首先用三维扫描仪获得实际物体的三维数据,用"点云算法"模拟得到其菲涅耳全息图透射率数据,采用计算全息打印机将其输出于全息记录介质,得到可光学再现的菲涅耳计算全息图H₁.然后将H₁作为光学全息的记录物体进行反射全息记录,将平面全息转化为体全息,实现了计算全息白光再现.     

利用反射全息实现计算全息三维显示

计算全息和光学全息都可应用于三维显示,但各有自己的优势和缺陷.将计算全息和光学反射全息相结合,可以突破光学全息对记录物体的限制,进行虚拟物体或自然场景的全息图的制作,同时可以实现白光再现.本文首先用三维扫描仪获得实际物体的三维数据,用"点云算法"模拟得到其菲涅耳全息图透射率数据,采用计算全息打印机将其输出于全息记录介质,得到可光学再现的菲涅耳计算全息图H1.然后将H1作为光学全息的记录物体进行反射全息记录,将平面全息转化为体全息,实现了计算全息白光再现.     

Watermarking of three-dimensional objects by digital holography

We present an optical method for information watermarking of three-dimensional (3D) objects by digital holography. A hidden image is embedded by double phase encoding in a phase-shift digital hologram of the 3D object. We decode the watermarked hologram to reconstruct the hidden image and the 3D object. We use either the entire hologram or a part of it to decode the hidden image. Experiments are presented to illustrate the ability to recover both the 3D object and the decoded hidden image. Digital holograms of the 3D object are obtained by optical experiments. The watermarking process, 3D object reconstruction, and hidden image recovery are performed digitally. To the best of our knowledge, this is the first report of 3D object watermarking by use of a phase encoding technique and digital holography.     

Low-complexity compression of holograms based on delta modulation

Past research has demonstrated that hologram of a real world object can be acquired by scanning it with a single two-dimensional optical scan. The technology commonly referred to as optical scanning holography (OSH), have found important applications such as in microscopy, pattern recognition, 3D holographic display, and optical remote sensing. As holograms are often employed to capture three dimensional objects with high resolution, large amount of data is required to represent them. In this paper we propose a method for compressing holograms based on Delta modulation. Specifically, we apply our proposed method for holograms captured by OSH. Experimental evaluation reveals that our proposed approach is capable of attaining a compression ratio of 64 times, and still preserves favorable fidelity on the reconstructed images. In addition, both the encoding and decoding processes of the proposed method are very low in complexity, hence enabling real-time operation.     

环形光栅光学扫描全息术的研究

为了充分利用光学扫描全息系统的分辨率,提出了用环形光栅扫描物体的光学扫描全是术。其优点是：可以用非相干光源记录扫描全息图,系统为单光路,从而可以提高系统的稳定性。阐明了环形光栅光学扫描全息术的基本原理,并给出了实验结果。     

Twin-image elimination experiments for three-dimensional images in optical scanning holography

Twin-image elimination in the context of optical scanning holography has recently been proposed. The proposed technique involves simultaneously acquiring sine and cosine Fresnel holograms. A complex hologram is then formed by complex addition of the holograms, and twin-image rejection is predicted by computer simulations. An experimental verification of the technique by optical acquisition of the two holograms and subsequent reconstruction of the complex hologram digitally is reported. Three-dimensional image reconstruction without twin-image noise is demonstrated.     

彩色全息术的进展及未来发展

对不同时期和采用各种技术制作的彩色全息图以及所使用的记录材料进行了较全面的介绍。这些技术包括光全息术、计算全息术和数字全息术。并对彩色全息术的未来发展进行了展望。     

菲涅尔数字全息的脉冲响应

数字全息是用CCD记录全息图并用计算机数值重建全息像的一种全息新方法.在数字全息中,通过对不同记录参数下记录的全息图的数值处理,可以消除零级光和共轭光,从而将数字全息系统看作是一个线性系统.本文依据全息理论和付里叶频谱分析,对菲涅尔数字全息系统的脉冲响应和分辨本领进行了理论分析.结果表明,在矩形等间隔抽样的情形下,菲涅尔数字全息的脉冲响应是由CCD有限大小的孔径衍射斑调制的矩形函数;菲涅尔数字全息的分辨率由CCD的孔径尺寸决定;由于CCD像素具有一定的大小,使得点光源的像发生弥散.     

Quasi-distributed displacement sensor for structural monitoring using a commercial OTDR

A quasi-distributed displacement sensor for structural monitoring using an optical time domain reflectometer is demonstrated. Four displacement sensing heads are placed along a standard single mode optical fibre in several locations with different intervals. Their configurations introduce power loss through the decrease of their fibre loop radius when displacement is applied. The decrease of the light intensity with displacement variation is reported. Losses of 9 dB for a 120 mm displacement with a sensitivity of 0.027 dB/mm are reported. The quasi-distributed configuration is able to address sensors with 1 m distance resolution between them.     

Spatially incoherent Fourier digital holography by four-step phase-shifting rotational shearing interferometer and its image quality

Spatially incoherent Fourier digital holography using a rotational shearing interferometer for four-step phase-shifting method is proposed. The previous incoherent Fourier holography using a rotational shearing interferometer [Watanabe and Nomura (Appl. Opt. 54:A18, 2015)] employs the two-step phase-shifting method in the vertical and horizontal polarizations. The reconstructed image contains a large bias term. This paper proposes introduction of two kinds of wave plates in one path of a rotational shearing interferometer for a four-step phase-shifting method. A Fourier hologram is obtained from the four recorded holograms for eliminating the bias term and the twin image. The numerical simulation and the optical experiment demonstrate improvement of the image quality of reconstructed image by the twin image and bias level reduction. Furthermore, the effect of the size of an image sensor on the image quality in rotational shearing interferometer is also investigated by the numerical simulations.     

Resolution in X-ray Holography

Ｒｅｃｅｉｖｅｄ２６Ｊａｎ．１９９５；Ｒｅｖｉｓｅｄｍａｎｕｓｃｒｉｐｔｒｅｃｅｉｖｅｄ１８Ａｐｒ．１９９５ＲｅｓｏｌｕｔｉｏｎｉｎＸ－ｒａｙＨｏｌｏｇｒａｐｈｙ￥ＺＨＵＰｅｉｐｉｎｇ；ＸＩＡＯＴｉｑｉａｏ；ＣＨＥＮＪｉａｎｗｅｎ；ＸＵＺｈｉｚｈａｎ...     

Quantum confinement effect in ZnO nanoparticles synthesized by co-precipitate method

Quantum mechanical effects such as an increased bandgap of semiconductors with reduction of size are viewed as having strong potential for future applications. In the present work, zinc oxide (ZnO) nanoparticles (NPs) were synthesized via the co-precipitate method. Very narrow particle size distribution of the ZnO nanoparticles was achieved through careful control of the synthesis conditions. The structural, morphological, and optical characterization was carried out using X-ray diffraction, atomic force microscopy, and UV–vis reflectance techniques, respectively. The results indicated that increasing the temperature from 60 to 65 °C caused a subsequent increase in particle size from 4 to 12 nm. An associated increase in bandgap with decrease in particle size was also noticed which is a strong indication of the quantum confinement effect.     

Carbon nanotube–polymer composites for photonic devices

We report the fabrication of high optical quality single wall carbon nanotube polyvinyl alcohol composites and their application in nanotube based photonic devices. These show a broad absorption of semiconductor tubes centred at 1.55 μm, the spectral range of interest for optical communications. The films are used as mode-lockers in an erbium doped fibre laser, achieving 700 fs mode-locked pulses. Raman spectroscopy shows no damage after a long time continuous laser operation.     

Optical encryption of gray-level image using on-axis and 2-f digital holography with two-step phase-shifting method

In this paper we propose an encryption/decryption technique of gray-level image information using an on-axis 2-f digital holographic optical encrypting system with two-step phase-shifting method. This technique reduces the number of holograms in phase-shifting digital holography and minimizes the setup of the encryption system more than multistep phase-shifting technique. We are able to get the complete decrypted image by controlling the K-ratio which is defined as the reference beam intensity versus the object beam intensity. We remove the DC-term of the phase-shifting digital hologram to reconstruct and decrypt the original image information. Simulation results show that the proposed method can be used for encryption and decryption of a 256 gray-level image. Also, the result shows some errors of the decrypted image according to K-ratio.     

Calculating depth maps from digital holograms using stereo disparity

Depth extraction is an important aspect of three-dimensional (3D) image processing with digital holograms and an essential step in extended focus imaging and metrology. All available depth extraction techniques with macroscopic objects are based on variance; however, the effectiveness of this is object dependent. We propose to use disparity between corresponding points in intensity reconstructions to determine depth. Our method requires a single hologram of a scene, from which we reconstruct two different perspectives. In the reconstruction the phase information is not needed, which makes this method useful for in-line digital holography. To our knowledge disparity based 3D image processing has never been proposed before for digital holography.     

Plasmonic nano‐slits assisted polarization selective detour phase meta‐hologram

Traditional detour‐phase hologram is a powerful optical device for manipulating phase and amplitude of light, but it is usually not sensitive to the polarization of light. By introducing the light‐metasurface interaction mechanism to the traditional detour phase hologram, we design a novel plasmonic nano‐slits assisted polarization selective detour phase meta‐hologram, which has attractive advantages of polarization multiplexing ability, broadband response, and ultra‐compact size. The meta‐hologram relies on the dislocations of plasmonic slits to achieve arbitrary phase distributions, showing strong polarization selectivity to incident light due to the plasmonic response of deep‐subwavelength slits. To verify its polarization sensitive and broadband responses, we experimentally demonstrate two holographic patterns of an optical vortex and an Airy beam at p‐ and s‐polarized light with wavelengths of 532nm, 633nm and 780nm, respectively. Furthermore, we realize an application example of the meta‐hologram as a polarization multiplexed photonic device for multi‐channel optical angular momentum (OAM) generation and detection. Such meta‐holograms could find widespread applications in photonics, such as chip‐level beam shaping and high‐capacity OAM communication.

     

三维漫射体单波长真彩色彩虹全息术

提出一种新的三维漫反射物体真彩色彩虹全息术,在普通一步法真彩色彩虹全息术的基础上,用单波长激光逆光路再现,可在同一种记录介质上一次曝光记录三维物体的真彩色全息图.因而特别适合于制作光致抗蚀剂模压全息母板.     

基于空间光调制器的非相干数字全息单次曝光研究

菲涅耳非相干相关全息术(Fresnel incoherent correlation holography,FINCH)利用在空间光调制器(spatial light modulator,SLM)上加载双透镜模式对同一物点光分束自相干,并通过改变加载的相位因子得到不同的相移全息图.本系统利用SLM可分区编码调制特性,将FINCH成像中SLM上分三次加载的0°,120°,240°相位双透镜掩模各提取1/3组成一幅复合相移模式加载,并研究了三种相位分布方式对FINCH成像质量的影响.结果表明:三个相位在SLM上分布间隔越大,再现像越清晰.在此基础上,提出了一种新的掩模加载方式,在SLM加载透镜阵列,每一个相位因子对应一个双透镜,具有一个光轴.实验表明,通过这种加载方式,通过SLM后形成的三个相移图能够一次在电荷耦合器上记录,并且三个相移图不重叠,然后通过MATLAB编程计算将不同相移角度的全息图分别提取出来,通过三步相移计算合成一幅包含有物光波的复值全息图,最后通过数值再现算法重建待测样品.此系统可用于对光源相干性较低的实时成像系统,也为微小形变测量、动态物体的观测提供了新方法,为非相干数字全息术的发展提供了新思路.     

Effect of the synthesis route on the structural properties and shape of the indium oxide (In2O3) nano-particles

Nano-crystalline indium oxide (In₂O₃) particles have been synthesized by sol–gel and hydro-thermal techniques. A simple hydro-alcoholic solution consisting indium nitrate hydrate and citric acid (in sol–gel method) and 1, 4-butandiol (in hydro-thermal method) have been utilized. The structural properties of indium oxide nano-powders annealed at 450 °C (for both methods) have been characterized by the X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and specific surface area (SSA) analysis. Structural analysis of the samples shows cubic phase in sol–gel and cubic-hexagonal phase mixture in hydro-thermally prepared particles. The nano-particles prepared by sol–gel method have nearly spherical shape, whereas hydro-thermally-made ones display wire- and needle-like shape in addition to the spherical shape. The obtained In₂O₃ nano-particles surface areas were 23.2 and 55.3 in sol–gel and hydro-thermal methods, respectively. The optical direct band gap of In₂O₃ nano-particles were determined to be 4.32 and 4.24 eV for sol–gel and hydro-thermal methods, respectively. These values exhibit 0.5 eV blue shift from that the bulk In₂O₃ (3.75 eV), which is related to the particle size reduction and approaching the quantum confinement limit of nano-particles.     

双Lloyd镜数字全息显微测量术

提出了一种双Lloyd镜数字全息显微测量技术.其基本思想是将Lloyd镜的共光束自干涉特性与双波长光学相位解包裹方法相结合,使用两个Lloyd镜调节参考光与物光夹角以形成共光束自干涉,从而获得一张双波长复合全息图,再通过角谱法再现得到每个波长对应的包裹相位,利用两波长的相位差求得解包裹后的相位图和三维高度分布图.采用532和632 nm两波长记录全息图,通过数值再现重构被测物体的振幅和相位信息.与标定值相比,实验值的误差小于5%,证明了该方法的有效性.