Peroxotungstate immobilized on ionic liquid-modified silica as a heterogeneous epoxidation catalyst with hydrogen peroxide

Peroxotungstate immobilized on ionic liquid-modified SiO2 is capable of heterogeneously epoxidizing a wide range of olefins with the maintenance of the catalytic activity of homogeneous analogue. The epoxidation was immediately stopped by the removal of the catalyst, and no tungsten species could be found in the filtrate after the removal of the catalyst. These results can rule out any contribution to the observed catalysis from the tungsten species that leached into the reaction solution, and the observed catalysis is truly heterogeneous in nature. Furthermore, the catalyst was reusable without the loss of the catalytic performance.     

Chiral fluoro ketones for catalytic asymmetric epoxidation of alkenes with oxone

Two structurally dissimilar, chiral fluoro ketones have been prepared and their potential as enantioselective catalysts for asymmetric epoxidation with Oxone has been evaluated. The tropinone-based ketone (-)-5 was easily prepared and showed excellent reactivity but only modest enantioselectivity. The biphenyl-based ketone (-)-6 was prepared in a somewhat lengthy synthesis (along with its monofluoro and geminal fluoro analogues). This ketone exhibited only modest reactivity; 30 mol % of (-)-6 was needed to bring about complete conversion in a reasonable time. The enantioselectivity of this catalyst was generally much higher, but again very substrate dependent.     

A cyclodextrin-modified ketoester for stereoselective epoxidation of alkenes

A beta-cyclodextrin-modified ketoester 2 was prepared by covalent attachment of a reactive ketone moiety to beta-cyclodextrin. Treatment of 2 with Oxone as terminal oxidant would produce CD-substituted dioxirane, which can effect stereoselective alkene epoxidation. The 2-mediated (S)-alpha-terpineol epoxidations proceeded to give terpineol oxides in high yields, and the stereoselectivities (i.e., cis-/trans-epoxide ratio) decreased from 2.5:1 to 1:1.2 with increasing steric bulkiness of the terpenes. This steric-dependent stereoselectivity can be understood based on different binding geometries of the 2/terpene inclusion complexes according to the (1)H NMR titration and 2D ROESY experiments. Enantioselective epoxidation of styrenes has also been achieved with 2 as catalyst (20-50 mol %) in aqueous acetonitrile solution, and up to 40% ee was obtained in 4-chlorostyrene epoxidation at 0 degrees C. Similar enantioselectivities were also obtained for the 2-mediated epoxidation of 1,2-dihydronaphthalene (37% ee), 4-chlorostyrene (36% ee), and trans-stilbene (31% ee).     

A new heterogeneous catalyst for epoxidation of alkenes via one-step post-functionalization of IRMOF-3 with a manganese(II) acetylacetonate complex

A manganese(II) acetylacetonate complex has been immobilized to the metal-organic framework IRMOF-3 through a one-step post-synthetic route for the first time, providing an effective and recyclable heterogeneous catalyst for epoxidation of alkenes.     

[Mn(TPPS)] immobilized on ionic liquid-modified silica as a heterogeneous and reusable catalyst for epoxidation of alkenes with NaIO<Subscript>4</Subscript> under ultrasonic irradiation

Effective epoxidation of alkenes using sodium periodate was accomplished with Manganese (III) tetrakis(p-sulfonatophenyl)porphyrin, [C₄₄H₂₆N₄O₁₂S₄Na₄], supported on ionic liquids-modified silica, Im-SiO₂, under ultrasonic irradiation conditions is reported. This heterogeneous catalyst, [Mn(TPPS)@SiO₂-Im] was characterized by elemental analysis, scanning electron microscopy (SEM), FT-IR and UV–Vis spectroscopic methods. The synthesized hybrid catalyst was applied for efficient epoxidation of various alkenes with sodium periodate in acetonitrile under ultrasonic irradiation conditions. This solid catalyst can be easily recovered by simple filtration and reused several time without apparent loss of its catalytic activity.     

A new class of chiral tetrahydropyran-4-one catalyst for asymmetric epoxidation of alkenes

A new class of chiral α-oxygenated-tetrahydropyran-4-ones for asymmetric epoxidation of alkenes using Oxone^® is described, affording epoxides with up to 83% ee.     

Silica supported Ru(salophen)Cl: An efficient and robust heterogeneous catalyst for epoxidation of alkenes with sodium periodate

In the present work, heterogenization of Ru(salophen)Cl via its axial ligation to silica-bound imidazole, SiIm, is reported. The heterogeneous catalyst, [Ru(salophen)Cl–SiIm], was characterized by elemental analysis, SEM, TEM, FT-IR and diffuse reflectance UV–Vis spectroscopic techniques. The catalyst, which is not soluble in water and common organic solvents, was used for efficient epoxidation of cyclic and linear alkenes with NaIO₄ under agitation with magnetic stirring. This new heterogenized catalyst is of high stability and reusability in the oxidation reactions. The effect of reaction parameters such as solvent and oxidant in the epoxidation of cis-cyclooctene were also investigated.     

A new layered metal-organic framework as a promising heterogeneous catalyst for olefin epoxidation reactions

A new layered MOF material [Co(Hoba)(2)·2H(2)O] (1) (H(2)oba = 4,4'-oxybis(benzoic acid)) has been synthesized and used as a highly recyclable heterogeneous catalyst for olefin epoxidation reactions. Both high conversion (96%) and high selectivity of epoxide products (96%) are achieved.     

Nanocluster polyoxomolybdate supported on natural zeolite: a green and recyclable catalyst for epoxidation of alkenes

A heterogeneous catalyst for epoxidation of alkenes has been synthesized by introducing polyoxomolybdate into a natural zeolite as a solid and green support. The prepared catalyst was characterized by FT-IR, inductively coupled plasma optical emission spectrometry (ICP-OES), powder X-ray diffraction (XRD), N₂ absorption–desorption, field emission scanning electron micrograph (FE-SEM) and transmission electron microscopy (TEM). The catalytic investigations disclosed that nanocluster polyoxomolybdate supported on the surface is an active and recyclable catalyst in liquid phase alkene epoxidation in dichloroethane at 80 °C.     

Dendritic chiral auxiliaries on silica: a new heterogeneous catalyst for enantioselective addition of diethylzinc to benzaldehyde

This article reports the first work on the use of silica supported dendritic chiral auxiliaries for the enantioselective addition of diethylzinc to benzaldehyde: the control of dendrimer propagation on the silica surface is of prime importance to obtain enhanced conversion, selectivity, and enantioselectivity.     

Dioxomolybdenum(VI) complex covalently attached to amino‐modified graphene oxide: heterogeneous catalyst for the epoxidation of alkenes

Transition metal salen complex MoO₂–salen was successfully tethered onto amino‐functionalized graphene oxide (designated as MoO₂–salen–GO), which was tested in the epoxidation of various alkenes using tert‐butylhydroperoxide or H₂O₂ as oxidant. Characterization results showed that dioxomolybdenum(VI) complex was successfully grafted onto the amino‐functionalized graphene oxide and the structure of the graphene oxide was well preserved after several stepwise synthesis procedures. Catalytic tests showed that heterogeneous catalyst MoO₂–salen–GO was more active than its homogeneous analogue MoO₂–salen in the epoxidation of cyclooctene due to site isolation. In addition, the MoO₂–salen–GO catalyst could be reused three times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Tethering of nickel(II) Schiff-base complex onto mesoporous silica: An efficient heterogeneous catalyst for epoxidation of olefins

A new hybrid catalyst has been prepared by tethering a nickel(II) Schiff-base complex via post-synthesis modification of mesoporous silica, MCM-41. The Schiff-base has been derived from salicylaldehyde and 3-aminopropyltriethoxysilane (3-APTES) which is chemically anchored on MCM-41 via silicon alkoxide route. The anchored Schiff-bases imposed a stable planar coordination geometry around the central nickel ions. The catalyst has been characterized by elemental analysis, FT-IR, UV-Vis, small angle X-ray diffraction (SAX) and transmission electron microscopy (TEM) studies. The SAX and TEM measurement showed the mesoporosity of the catalyst. The activity of the catalyst has been assessed in the epoxidation of olefins using tert-butyl-hydroperoxide (tert-BuOOH) as oxidant in heterogeneous condition. Immobilized nickel catalyst was found to be catalytically more active and selective compared to the similar type of nickel(II) complex as well as Ni(NO₃)₂·6H₂O in homogeneous media. The catalyst can be recycled and reused several times without significant loss of activity.     

Encapsulated ultrafine and highly dispersed molybdenum dioxide nanoparticles in hollow mesoporous silica spheres as an efficient epoxidation catalyst for alkenes

A facile post-synthetic strategy was developed to functionalize the preformed hollow mesoporous silica spheres by encapsulating the molybdenum dioxide (MoO₂) nanoparticles inside the interior cavity. Hollow mesoporous silica spheres were prepared and employed as carriers, and the encapsulation of MoO₂ nanoparticles was achieved through a one-pot hydrothermal protocol. After characterization, the encapsulated MoO₂ nanoparticles were certified to be ultrafine and highly dispersed, which greatly promoted the catalytic activity. The as-prepared catalysts were utilized in epoxidation of alkenes and exhibited as a promising catalyst in this reaction. After reacting for 10 h, the optimal catalyst MoO₂@SiO₂-1 achieved a conversion above 95% and selectivity above 95%, respectively. Moreover, the catalysts also exhibited good reusability, conversion of 78% and selectivity of 89% (reaction time 4 h) were still obtained after recycling for 5 times. Meanwhile, the employed facial and efficient hydrothermal approach could be expanded to other molybdenum modified heterogeneous catalysts in various applications.     

Fluorinated chiral secondary amines as catalysts for epoxidation of olefins with oxone

We have synthesized a series of chiral cyclic secondary amines having different substitution patterns and have screened them as catalysts for the asymmetric epoxidation of olefins using Oxone. The highest enantiomeric excess (61%) occurred for the epoxidation of 1-phenylcyclohexene catalyzed by a secondary amine bearing a fluorine atom at the beta-position relative to the amino center. Our experimental results provide further support to the notion that the amine plays a dual role--as a phase transfer catalyst and an Oxone activator--in these epoxidation reactions. The slightly acidic reaction conditions we employed in this work obviate the need to preform ammonium salts, which are the actual catalysts that mediate the epoxidations.     

Hydrosilylation of alkenes catalysed by rhodium complexes immobilized on silica via a pyridine group

2-(2-Trimethoxysilylethyl)pyridine, together with 3-methcryloxypropyltrimethoxysilane, was used to prepare a series of rhodium carbonyl complexes bound to silica via a pyridine group. The rhodium complex Rh₂(CO)₄Cl₂ (Rh₂) was used as the starting compound, and the immobilized complexes were prepared by four different routes which yielded both surface-bonded complexes and complexes bonded within the silicate matrix. These complexes were efficient catalysts of hydrosilylation of octene by triethxysilane. All the immobilized complexes were more than their homogeneous analogues and some could be re-used.     

An approach to a chiral cycloalkanone-mediated asymmetric epoxidation of stilbene with oxone.

Chiral and C2-symmetric seven-membered cycloalkanones 2--6 bearing 1,2-diphenylethane-1,2-diamine and cyclohexane-1,2-diamine backbones were synthesized and evaluated their asymmetry inductive behaviours in an asymmetric epoxidation of stilbene with oxone. Although the reaction of the ketones 2 and 3 of a 1,2-diphenylethane-1,2-diamine backbone gave stilbene oxide in trace to 31% yield, those of the ketones 4-6 of a cyclohexane-1,2-diamine backbone gave the epoxide in satisfactorily high yield up to 98%. It is noteworthy that both reactions with use of stoichiometric and substoichiometric amounts of a ketone 4 gave the epoxide in the essentially same enantioselectivity, 17 and 18%. Eleven-membered cyclic ketones 7 and 8 bearing a binaphthalene backbone were also synthesized and examined their behaviours, while the enantioselectivity turned out to be marginal.     

Highly active heterogeneous Fenton catalyst using iron oxide nanoparticles immobilized in alumina coated mesoporous silica

A highly active heterogeneous Fenton catalyst was fabricated by impregnating iron oxide nanoparticles in alumina coated mesoporous SBA-15 silica.