Synthesis,structure, and spectroscopic,photochemical, redox,and catalytic properties of ruthenium(II) isomeric complexes containing dimethyl sulfoxide,chloro, and the dinucleating bis(2-pyridyl)pyrazole ligands

Two isomeric Ru(II) complexes containing the dinucleating Hbpp (3,5-bis(2-pyridyl)pyrazole) ligand together with Cl and dmso ligands have been prepared and their structural, spectroscopic, electrochemical, photochemical, and catalytic properties studied. The crystal structures of trans,cis-[Ru(II)Cl(2)(Hbpp)(dmso)(2)], 2a, and cis(out),cis-[Ru(II)Cl(2)(Hbpp)(dmso)(2)], 2b, have been solved by means of single-crystal X-ray diffraction analysis showing a distorted octahedral geometry for the metal center where the dmso ligands coordinate through their S atom. 1D and 2D NMR spectroscopy corroborates a similar structure in solution for both isomers. Exposure of either 2a or 2b in acetonitrile solution under UV light produces a substitution of one dmso ligand by a solvent molecule generating the same product namely, cis(out)-[Ru(II)Cl(2)(Hbpp)(MeCN)(dmso)], 4. While the 1 e(-) oxidation of 2b or cis(out),cis-[Ru(II)Cl(2)(bpp)(dmso)(2)](+), 3b, generates a stable product, the same process for 2a or trans,cis-[Ru(II)Cl(2)(bpp)(dmso)(2)](+), 3a, produces the interesting linkage isomerization phenomenon where the dmso ligand switches its bond from Ru-S to Ru-O (K(III)(O)(-->)(S) = 0.25 +/- 0.025, k(III)(O)(-->)(S) = 0.017 s(-1), and k(III)(S)(-->)(O) = 0.065 s(-1); K(II)(O)(-->)(S) = 6.45 x 10(9), k(II)(O)(-->)(S) = 0.132 s(-1), k(II)(S)(-->)(O) = 2.1 x 10(-11) s(-1)). Finally complex 3a presents a relatively high activity as hydrogen transfer catalyst, with regard to its ability to transform acetophenone into 2-phenylethyl alcohol using 2-propanol as the source of hydrogen atoms.     

Matrix isolation infrared spectroscopic and quantum chemical studies on the rotational isomers of orotic acid (6-carboxyuracil)

The infrared spectrum of orotic acid (6-carboxyuracil) isolated in a low-temperature argon matrix is presented, for the first time. This molecule is a key precursor in the biosynthesis of all pyrimidine nucleotides in living organisms. The comprehensive theoretical studies on the rotational isomerism of orotic acid have been performed by an ab initio MP2 and three density functional methods (B3LYP, M06 and M06-2X). All theoretical methods have predicted that four possible conformers of orotic acid may exist in the gas phase. The calculated barrier height for rotation of the COOH group around the CC bond (37 kJ mol⁻¹, M06-2X) is much lower than the barriers for the OH rotation around the CO bond (47 and 51 kJ mol⁻¹). The Gibbs free energies, relative stabilities and the mole fractions of isomers at different temperatures, in the gas phase, have been determined.The anharmonic vibrational frequencies, infrared intensities and potential energy distributions (PEDs) were computed for two isomers of the lowest energy (A and B) using the B3LYP method with the aug-cc-pVTZ basis set. The theoretical anharmonic IR spectra are in excellent agreement with the experiment. It is concluded that the most stable conformer (A) is the predominant form in a low-temperature argon matrix, while the mole fraction of the less stable B conformer can be assessed as ca. 15%. No spectral indications of the presence of other isomers (C and D) in the matrix were detected.     

Ion-Pair Charge Transfer Photochemistry in Rhenium(I) Borate Salts

The photophysics and photochemistry of the salt [(bpy)Re(CO)(3)(py)(+)][BzBPh(3)(-)] (ReBo, where bpy = 2,2'-bipyridine, py = pyridine, Bz = C(6)H(5)CH(2) and Ph = C(6)H(5)) has been investigated in THF and CH(3)CN solutions. UV-visible absorption and steady-state emission spectroscopy indicates that in THF ReBo exists primairly as an ion-pair. A weak absorption band is observed for the salt in THF solution that is assigned to an optical ion-pair charge transfer transition. Stern-Volmer emission quenching studies indicate that BzBPh(3)(-) quenches the luminescent dpi (Re) --> pi (bpy) metal-to-ligand charge transfer excited state of the (bpy)Re(CO)(3)(py)(+) chromophore. The quenching is attributed to electron transfer from the benzylborate anion to the photoexcited Re(I) complex, (bpy(-)(*))Re(II)(CO)(3)(py)(+) + BzBPh(3)(-) --> (bpy(-)(*))Re(I)(CO)(3)(py) + BzBPh(3)(*). Laser flash photolysis studies reveal that electron transfer quenching leads to irreversible reduction of the Re(I) cation to (bpy(-)(*))Re(I)(CO)(3)(py). Photoinduced electron transfer is irreversible owing to rapid C-B bond fragmentation in the benzylboranyl radical, PhCH(2)BPh(3)(*) --> PhCH(2)(*) + BPh(3)(*). Quantitative laser flash photolysis experiments show that the quantum efficiency for production of the reduced complex (bpy(-)(*))Re(I)(CO)(3)(py) is unity, suggesting that C-B bond fragmentation in the benzylboranyl radical occurs more rapidly than return electron transfer within the geminate radical pair that is formed by photoinduced electron transfer.     

Isolation of three isomers of Sm@C84 and X-ray crystallographic characterization of Sm@D(3d)(19)-C84 and Sm@C2(13)-C84

Three isomers with the composition Sm@C(84) were isolated from carbon soot obtained by electric arc vaporization of carbon rods doped with Sm(2)O(3). These isomers were labeled Sm@C(84)(I), Sm@C(84)(II), and Sm@C(84)(III) in order of their elution times during chromatography on a Buckyprep column with toluene as the eluent. Analysis of the structures by single-crystal X-ray diffraction on cocrystals formed with Ni(II)(octaethylporphyrin) reveals the identities of two of the isomers: Sm@C(84)(I) is Sm@C(2)(13)-C(84), and Sm@C(84)(III) is Sm@ D(3d)(19)-C(84). Sm@C(84)(II) can be identified as Sm@C(2)(11)-C(84) on the basis of the similarity of its UV/vis/NIR spectrum with that of Yb@C(2)(11)-C(84), whose carbon cage has been characterized by (13)C NMR spectroscopy. Comparison of the three Sm@C(84) isomers identified in this project with two prior reports of the preparation and isolation of isomers of Sm@C(84) indicate that five different Sm@C(84) isomers have been found and that the source of samarium used for the generation of fullerene soot is important in determining which of these isomers form.     

Self-assembly of polyoxometalate-based metal organic frameworks based on octamolybdates and copper-organic units: from Cu(II), Cu(I,II) to Cu(I) via changing organic amine

Six polyoxometalate (POM)-based hybrid materials have been designed and synthesized based on octamolybdate building blocks and copper-organic units at different pH values under hydrothermal conditions, namely, [H2bbi][Cu(II)(bbi)2(beta-Mo8O26)] (1), [Cu(II)(bbi)2(H2O)(beta-Mo8O26)0.5] (2), [Cu(II)(bbi)2(alpha-Mo8O26)][Cu(I)(bbi)]2 (3), [Cu(II)Cu(I)(bbi)3(alpha-Mo8O26)][Cu(I)(bbi)] (4), [Cu(I)(bbi)]2[Cu(I)2(bbi)2(delta-Mo8O26)0.5][alpha-Mo8O26]0.5 (5), and [Cu(I)(bbi)][Cu(I)(bbi)(theta-Mo8O26)0.5] (6), where bbi is 1,1'-(1,4-butanediyl)bis(imidazole). Their crystal structures have been determined by X-ray diffraction. In compound 1, the bbi ligands with bis-monodentate coordination modes link Cu(II) cations to generate a 2D copper-organic unit with (4, 4) net, which is pillared by the (beta-Mo8O26)(4-) anions to form a 3D framework with alpha-Po topology. The similar copper-organic units are connected alternately by (beta-Mo8O26)(4-) anions to generate a 3D 2-fold interpenetrating (4,6)-connected framework with (4(4) x 6(2))(4(4) x 6(10) x 8) topology in compound 2. Compounds 3 and 4 are supramolecular isomers with polythreaded topology. If Cu (I)...O interactions are considered, the structure of 3 is a novel self-penetrating (3,4,6)-connected framework with (5(2) x 8)2(5(4) x 6 x 8)(4(4) x 6(10) x 10) topology, and the structure of 4 is a (4,6)-connected framework with (4(2) x 6(3) x 7)(5.6(4) x 8)(4(2) x 5(6) x 6(6) x 8)(4(2) x 5(6) x 6(4) x 7 x 8(2)) topology. Different from compounds 3 and 4, compounds 5 and 6 are supramolecular isomers with polythreaded topology based on different octamolybdate isomers. By careful inspection of the structures of 1-6, it is believed that various copper-organic units, which are formed by bbi ligands combined with Cu(II)/Cu(I) cations, octamolybdates with different types and coordination modes, and the nonbonding interactions between polyanions and copper-organic units are important for the formation of the different structures. In addition, with step by step increasing of the amount of organic amine, we have achieved the transformation of Cu(II) ions into Cu(I) ones in different degrees in POMs-based metal-organic frameworks (MOFs) for the first time. The infrared spectra, X-ray powder diffraction, and thermogravimetric analyses have been investigated in detail for all compounds, and the luminescent properties have been also been investigated for compounds 3 and 4.     

X-ray Crystallographic Characterization of New Soluble Endohedral Fullerenes Utilizing the Popular C(82) Bucky Cage. Isolation and Structural Characterization of Sm@C(3v)(7)-C(82), Sm@C(s)(6)-C(82), and Sm@C(2)(5)-C(82)

Three isomers of Sm@C(82) that are soluble in organic solvents were obtained from the carbon soot produced by vaporization of hollow carbon rods doped with Sm(2)O(3)/graphite powder in an electric arc. These isomers were numbered as Sm@C(82)(I), Sm@C(82)(II), and Sm@C(82)(III) in order of their elution times from HPLC chromatography on a Buckyprep column with toluene as the eluent. The identities of isomers, Sm@C(82)(I) as Sm@C(s)(6)-C(82), Sm@C(82)(II) as Sm@C(3v)(7)-C(82), and Sm@C(82)(III) as Sm@C(2)(5)-C(82), were determined by single-crystal X-ray diffraction on cocrystals formed with Ni(octaethylporphyrin). For endohedral fullerenes like La@C(82), which have three electrons transferred to the cage to produce the M(3+)@(C(82))(3-) electronic distribution, generally only two soluble isomers (e.g., La@C(2v)(9)-C(82) (major) and La@C(s)(6)-C(82) (minor)) are observed. In contrast, with samarium, which generates the M(2+)@(C(82))(2-) electronic distribution, five soluble isomers of Sm@C(82) have been detected, three in this study, the other two in two related prior studies. The structures of the four Sm@C(82) isomers that are currently established are Sm@C(2)(5)-C(82), Sm@C(s)(6)-C(82), Sm@C(3v)(7)-C(82), and Sm@C(2v)(9)-C(82). All of these isomers obey the isolated pentagon rule (IPR) and are sequentially interconvertable through Stone-Wales transformations.     

Electronic structures of ruthenium and osmium complexes of 9,10-phenanthrenequinone

The reaction of 9,10-phenanthrenequinone (PQ) with [M(II)(H)(CO)(X)(PPh(3))(3)] in boiling toluene leads to the homolytic cleavage of the M(II)-H bond, affording the paramagnetic trans-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 1; M = Os, X = Br, 3) and cis-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 2; M = Os, X = Br, 4) complexes. Single-crystal X-ray structure determinations of 1, 2·toluene, and 4·CH(2)Cl(2), EPR spectra, and density functional theory (DFT) calculations have substantiated that 1-4 are 9,10-phenanthrenesemiquinone radical (PQ(?-)) complexes of ruthenium(II) and osmium(II) and are defined as trans-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (1), cis-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (2), trans-[Os(II)(PQ(?-))(PPh(3))(2)(CO) Br] (3), and cis-[Os(II)(PQ(?-))(PPh(3))(2)(CO)Br] (4). Two comparatively longer C-O [average lengths: 1, 1.291(3) ?; 2·toluene, 1.281(5) ?; 4·CH(2)Cl(2), 1.300(8) ?] and shorter C-C lengths [1, 1.418(5) ?; 2·toluene, 1.439(6) ?; 4·CH(2)Cl(2), 1.434(9) ?] of the OO chelates are consistent with the presence of a reduced PQ(?-) ligand in 1-4. A minor contribution of the alternate resonance form, trans- or cis-[M(I)(PQ)(PPh(3))(2)(CO)X], of 1-4 has been predicted by the anisotropic X- and Q-band electron paramagnetic resonance spectra of the frozen glasses of the complexes at 25 K and unrestricted DFT calculations on 1, trans-[Ru(PQ)(PMe(3))(2)(CO)Cl] (5), cis-[Ru(PQ)(PMe(3))(2)(CO)Cl] (6), and cis-[Os(PQ)(PMe(3))(2)(CO)Br] (7). However, no thermodynamic equilibria between [M(II)(PQ(?-))(PPh(3))(2)(CO)X] and [M(I)(PQ)(PPh(3))(2)(CO)X] tautomers have been detected. 1-4 undergo one-electron oxidation at -0.06, -0.05, 0.03, and -0.03 V versus a ferrocenium/ferrocene, Fc(+)/Fc, couple because of the formation of PQ complexes as trans-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (1(+)), cis-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (2(+)), trans-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (3(+)), and cis-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (4(+)). The trans isomers 1 and 3 also undergo one-electron reduction at -1.11 and -0.96 V, forming PQ(2-) complexes trans-[Ru(II)(PQ(2-))(PPh(3))(2)(CO)Cl](-) (1(-)) and trans-[Os(II)(PQ(2-))(PPh(3))(2)(CO)Br](-) (3(-)). Oxidation of 1 by I(2) affords diamagnetic 1(+)I(3)(-) in low yields. Bond parameters of 1(+)I(3)(-) [C-O, 1.256(3) and 1.258(3) ?; C-C, 1.482(3) ?] are consistent with ligand oxidation, yielding a coordinated PQ ligand. Origins of UV-vis/near-IR absorption features of 1-4 and the electrogenerated species have been investigated by spectroelectrochemical measurements and time-dependent DFT calculations on 5, 6, 5(+), and 5(-).     

Ni0-catalyzed cyclotrimerization of 1,3-butadiene: a comprehensive density functional investigation on the origin of the selectivity

A comprehensive theoretical investigation of the mechanism for the Ni(0)-catalyzed cyclotrimerization of 1,3-butadiene by the [Ni(0)(eta(2)-butadiene)(3)] active catalyst complex is presented by employing a gradient-corrected DFT method. All critical elementary processes of the catalytic cycle have been scrutinized, namely, oxidative coupling of two butadienes, butadiene insertion into the allyl-Ni(II) bond, allylic isomerization in both octadienediyl-Ni(II) and dodecatrienediyl-Ni(II) species, and reductive elimination under ring closure. For each of these elementary steps several conceivable routes and also the different stereochemical pathways have been probed. The favorable route for oxidative coupling start from the prevalent [Ni(0)(eta(2)-butadiene)(3)] form of the active catalyst through coupling between the terminal non-coordinated carbon atoms of two reactive eta(2)-butadiene moieties; this is assisted by an ancillary butadiene in eta(2)-mode. The initial eta(3),eta(1)(C(1))-octadienediyl-Ni(II) product is the active precursor for subsequent butadiene insertion, which preferably takes place into the eta(3)-allyl-Ni(II) bond. The insertion is driven by a strong thermodynamic force. Therefore, the dodecatrienediyl-Ni(II) products, with the most favorable bis(eta(3)-allyl),Delta-trans isomers in particular, represent a thermodynamic sink. Commencing from a preestablished equilibrium between the various bis(eta(3)-allyl),Delta-trans forms of the [Ni(II)(dodecatrienediyl)] complex, the major cyclotrimer products, namely all-t-CDT, c,c,t-CDT and c,t,t-CDT, are formed along competing paths by reductive elimination under ring closure, which is shown to be rate-controlling. The all-c-CDT-generating path is completely precluded by both thermodynamic and kinetic factors, giving rise to negligibly populated bis(eta(3)-allyl),Delta-cis precursor isomers. The regulation of the selectivity of the CDT formation as well as the competition between the two reaction channels for generation of C(12)- and C(8)-cycloolefins is elucidated.     

Synthesis and characterization of facial and meridional tris-cyclometalated iridium(III) complexes

The synthesis, structures, electrochemistry, and photophysics of a series of facial (fac) and meridional (mer) tris-cyclometalated Ir(III) complexes are reported. The complexes have the general formula Ir(C'N)(3) [where C'N is a monoanionic cyclometalating ligand; 2-phenylpyridyl (ppy), 2-(p-tolyl)pyridyl (tpy), 2-(4,6-difluorophenyl)pyridyl (46dfppy), 1-phenylpyrazolyl (ppz), 1-(4,6-difluorophenyl)pyrazolyl (46dfppz), or 1-(4-trifluoromethylphenyl)pyrazolyl (tfmppz)]. Reaction of the dichloro-bridged dimers [(C'N(2)Ir(mu-Cl)(2)Ir(C'N)(2)] with 2 equiv of HC( wedge )N at 140-150 degrees C forms the corresponding meridional isomer, while higher reaction temperatures give predominantly the facial isomer. Both facial and meridional isomers can be obtained in good yield (>70%). The meridional isomer of Ir(tpy)(3) and facial and meridional isomers of Ir(ppz)(3) and Ir(tfmppz)(3) have been structurally characterized using X-ray crystallography. The facial isomers have near identical bond lengths (av Ir-C = 2.018 A, av Ir-N = 2.123 A) and angles. The three meridional isomers have the expected bond length alternations for the differing trans influences of phenyl and pyridyl/pyrazolyl ligands. Bonds that are trans to phenyl groups are longer (Ir-C av = 2.071 A, Ir-N av = 2.031 A) than when they are trans to heterocyclic groups. The Ir-C and Ir-N bonds with trans N and C, respectively, have bond lengths very similar to those observed for the corresponding facial isomers. DFT calculations of both the singlet (ground) and the triplet states of the compounds suggest that the HOMO levels are a mixture of Ir and ligand orbitals, while the LUMO is predominantly ligand-based. All of the complexes show reversible oxidation between 0.3 and 0.8 V, versus Fc/Fc(+). The meridional isomers are easier to oxidize by ca. 50-100 mV. The phenylpyridyl-based complexes have reduction potentials between -2.5 and -2.8 V, whereas the phenylpyrazolyl-based complexes exhibit no reduction up to the solvent limit of -3.0 V. All of the compounds have intense absorption bands in the UV region assigned into (1)(pi --> pi) transitions and weaker MLCT (metal-to-ligand charge transfer) transitions that extend to the visible region. The MLCT transitions of the pyrazolyl-based complexes are hypsochromically shifted relative to those of the pyridyl-based compounds. The phenylpyridyl-based Ir(III) tris-cyclometalates exhibit intense emission both at room temperature and at 77 K, whereas the phenylpyrazolyl-based derivatives emit strongly only at 77 K. The emission energies and lifetimes of the phenylpyridyl-based complexes (450-550 nm, 2-6 micros) and phenylpyrazolyl-based compounds (390-440 nm, 14-33 micros) are characteristic for a mixed ligand-centered/MLCT excited state. The meridional isomers for both pyridyl and pyrazolyl-based cyclometalates show markedly different spectroscopic properties than do the facial forms. Isolated samples of mer-Ir(C( wedge )N)(3) complexes can be thermally and photochemically converted to facial forms, indicating that the meridional isomers are kinetically favored products. The lower thermodynamic stabilities of the meridional isomers are likely related to structural features of these complexes; that is, the meridional configuration places strongly trans influencing phenyl groups opposite each other, whereas all three phenyl groups are opposite pyridyl or pyrazolyl groups in the facial complexes. The strong trans influence of the phenyl groups in the meridional isomers leads to the observation that they are easier to oxidize, exhibit broad, red-shifted emission, and have lower quantum efficiencies than their facial counterparts.     

Facile synthesis of monomeric alumatranes

Alumatranes, tricyclic neutral molecules featuring a transannular N --> Al bond, can act as Lewis acids that activate substrates in the axial coordination site. Treatment of tris(2-hydroxy-3,5-dimethylbenzyl)amine with AlMe(3) afforded dimeric (AlL)(2) 1 [wherein L = tris(2-oxy-3,5-dimethylbenzyl)amine]. X-ray diffraction analysis revealed bridging between AlL monomers by two Al-O bonds. Reactions of 1 with substrates containing O or N donors generated the alumatranes THF-AlL 2, PhCHO-AlL 3, H(2)NCH(2)CH(2)NH(2)-AlL 4, and [PhO-AlL](-) 5, in which the apical added ligand on the five-coordinate aluminum center causes variation in the transannular bond distance. Water coordinates with 1 at -20 degrees C to form the alumatrane H(2)O-AlL 6 that undergoes partial hydrolysis at room temperature to produce 7, which X-ray crystallography showed to be composed of four AlL fragments linked by an (H(2)O)(2)(HO)(2)Al(OH)(2)Al(OH)(2)(H(2)O)(2) framework in which the O(4)AlO(2)AlO(4) moiety is of local D(2)(h)() symmetry. According to X-ray analysis, 7 can crystallize in at least two polymorphic modifications: triclinic 7a and monoclinic 7b. The reaction of 3 with water also generated 6 and 7, depending on the reaction temperature. Dimeric 1 was found to promote the reaction of benzaldehyde with trimethylsilyl cyanide at room temperature to provide 2-trimethylsilyoxyphenylacetonitrile in 95% yield.     

Formation of dinuclear,macrocyclic, and chain structures from HgI(2) and a semirigid benzimidazole-based bridging ligand: an example of ring-opening supramolecular isomerism

The reactions of HgI(2) with the semirigid ditopic ligand 1,3-bis(benzimidazol-1-ylmethyl)-2,4,6-trimethylbenzene (bbimms) afforded three new complexes, [Hg(2)(mu-I)(2)I(2)(bbimms)] (1), [Hg(2)I(4)(bbimms)(2)] (2), and catena-poly[HgI(2)(bbimms)] (3). The ligand and all complexes have been structurally characterized by single-crystal X-ray diffraction. 1 is a triply bridged dinuclear complex comprised of two Hg(II) ions, one bridging ligand, two bridging I(-) anions, and two terminal I(-) anions. 2 is a dinuclear metallamacrocycle comprised of two Hg(II) ions, two bridging ligands, and four terminal I(-) anions, while 3 is a helical chain with the repeating unit of HgI(2)(bbimms). 2 and 3 can be classified as supramolecular isomers, and both are related to the triply bridged precursor 1 via the addition of one more ligand in a ring-opening process.     

Synthetic and computational studies of the palladium(iv) system Pd(alkyl)(aryl)(alkynyl)(bidentate)(triflate) exhibiting selectivity in C-C reductive elimination

Synthetic routes to methyl(aryl)alkynylpalladium(iv) motifs are presented, together with studies of selectivity in carbon-carbon coupling by reductive elimination from Pd(IV) centres. The iodonium reagents IPh(C[triple bond, length as m-dash]CR)(OTf) (R = SiMe(3), Bu(t), OTf = O(3)SCF(3)) oxidise Pd(II)Me(p-Tol)(L(2)) (1-3) [L(2) = 1,2-bis(dimethylphosphino)ethane (dmpe) (1), 2,2'-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3)] in acetone-d(6) or toluene-d(9) at -80 °C to form complexes Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CR)(L(2)) [R = SiMe(3), L(2) = dmpe (4), bpy (5), phen (6); R = Bu(t), L(2) = dmpe (7), bpy (8), phen (9)] which reductively eliminate predominantly (>90%) p-Tol-C[triple bond, length as m-dash]CR above ～-50 °C. NMR spectra show that isomeric mixtures are present for the Pd(IV) complexes: three for dmpe complexes (4, 7), and two for bpy and phen complexes (5, 6, 8, 9), with reversible reduction in the number of isomers to two occurring between -80 °C and -60 °C observed for the dmpe complex 4 in toluene-d(8). Kinetic data for reductive elimination from Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CSiMe(3))(dmpe) (4) yield similar activation parameters in acetone-d(6) (66 ± 2 kJ mol(-1), ΔH(?) 64 ± 2 kJ mol(-1), ΔS(?)-67 ± 2 J K(-1) mol(-1)) and toluene-d(8) (E(a) 68 ± 3 kJ mol(-1), ΔH(?) 66 ± 3 kJ mol(-1), ΔS(?)-74 ± 3 J K(-1) mol(-1)). The reaction rate in acetone-d(6) is unaffected by addition of sodium triflate, indicative of reductive elimination without prior dissociation of triflate. DFT computational studies at the B97-D level show that the energy difference between the three isomers of 4 is small (12.6 kJ mol(-1)), and is similar to the energy difference encompassing the six potential transition state structures from these isomers leading to three feasible C-C coupling products (13.0 kJ mol(-1)). The calculations are supportive of reductive elimination occurring directly from two of the three NMR observed isomers of 4, involving lower activation energies to form p-TolC[triple bond, length as m-dash]CSiMe(3) and earlier transition states than for other products, and involving coupling of carbon atoms with higher s character of σ-bonds (sp(2) for p-Tol, sp for C[triple bond, length as m-dash]C-SiMe(3)) to form the product with the strongest C-C bond energy of the potential coupling products. Reductive elimination occurs predominantly from the isomer with Me(3)SiC[triple bond, length as m-dash]C trans to OTf. Crystal structure analyses are presented for Pd(II)Me(p-Tol)(dmpe) (1), Pd(II)Me(p-Tol)(bpy) (2), and the acetonyl complex Pd(II)Me(CH(2)COMe)(bpy) (11).     

An example of O2 binding in a cobalt(II) corrole system and high-valent cobalt-cyano and cobalt-alkynyl complexes

The novel cobalt corrolazine (Cz) complexes (TBP)(8)CzCoCN (1) and (TBP)(8)CzCo(CCSiPh(3)) (2) have been synthesized and examined in light of the recent intense interest regarding the role of corrole ligands in stabilizing high oxidation states. In the case of 2, the molecular structure has been determined by X-ray crystallography, revealing a short Co[bond]C distance of 1.831(4) A and an intermolecular pi-stacking interaction between Cz ring planes, and this structure has been analyzed in regards to the electronic configuration. By a combination of spectroscopic techniques it has been shown that 1 is best described as a cobalt(III)[bond]pi-cation-radical complex, whereas 2 is likely best represented as the resonance hybrid (Cz)Co(IV)(CCSiPh(3)) <--> (Cz+*)Co(III)(CCSiPh(3)). The reduced cobalt(II) complex, [(TBP)(8)CzCo(II)(py)](-), has been generated in situ and shown to bind dioxygen at low temperature to give [(TBP)(8)CzCo(III)(py)(O(2))](-). For the reduced complex [(TBP)(8)CzCo(II)(py)](-), the EPR spectrum in frozen solution is indicative of a low-spin cobalt(II) complex with a d(z)2 ground state. Exposure of [(TBP)(8)CzCo(II)(py)](-) to O(2) leads to the reversible formation of the cobalt(III)-superoxo complex [(TBP)(8)CzCo(III)(py)(O(2))](-), which has been characterized by EPR spectroscopy. VT-EPR measurements show that the dioxygen adduct is stable up to T approximately 240 K. This work is the first observation, to our knowledge, of O(2) binding to a cobalt(II) corrole.     

Stereoselective oxidative additions of iodoalkanes and activated alkynes to a sulfido-bridged heterotrinuclear early-late (TiIr2) complex

The reactions of the early-late trinuclear complex [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(CO)(4)] (1) with electrophiles have been found to occur on the iridium atoms with no other involvement of the early metal than in electronic effects. The reaction with iodine gave two isomers of the diiridium(II) complex [Cp(acac)Ti(mu(3)-S)(2)Ir(2)I(2)(CO)(4)] differentiated by the relative positions of the iodo ligands on the iridium atoms. The reactions with iodoalkanes are highly stereoselective to give one sole isomer of formula [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(R)(I)(CO)(4)] (R = CH(3), CH(2)I, CHI(2)) with a carbonyl and the iodo ligand trans to the metal-metal bond. The structures of the symmetrical isomer with the iodo ligands trans to the metal-metal bond and that of the compound with R = CHI(2) have been solved by X-ray diffraction methods. The stereoselectivity of the oxidative-addition reactions can be rationalized assuming the influence of steric effects of the groups on the titanium center and a radical-like mechanism. Reactions of 1 with the activated acetylenes, dimethylacetylenedicarboxylate and methylacetylenecarboxylate, gave the complexes [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(mu-eta(1)-RC=CCO(2)Me)(CO)(4)] (R = CO(2)Me, H), with the alkyne bridging the two iridium centers as a cis-dimetalated olefin and the C=C bond parallel to the Ir-Ir axis. Two isomers resulting from the disposition of the alkyne along the Ir-Ir vector were observed in solution for the compound with the nonsymmetrical alkyne (R = H), while only one was observed for the compound with R = CO(2)Me. An exchange, fast in the NMR time scale, of the apical with the equatorial carbonyls occured in the complexes [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(mu-eta(1)-RC=CCO(2)Me)(CO)(4)], producing their equivalence in the (13)C((1)H) NMR spectra.     

Unusual reactivity of methylene group adjacent to pyridine-2-carboxamido moiety in iron(III) and cobalt(III) complexes

The Fe(III) and Co(III) complexes of the ligand N-(2-picolyl)picolinamide (pmpH; H represents the dissociable amide hydrogen), namely, [Fe(pmp)(2)]BF(4) (1) and [Co(pmp)(2)]ClO(4) (2), have been synthesized and structurally characterized. The [bond]CH(2)[bond] moiety of pmp(-) in [M(pmp)(2)](+) (M = Fe, Co) is very reactive and is readily converted to carbonyl (C[double bond]O) group upon exposure to dioxygen. Such conversion results in [M(bpca)(2)]ClO(4) complexes (M = Fe (3), Co (5); bpcaH = bis(2-pyridylcarbonyl)amine) which have been characterized by spectroscopy and X-ray diffraction. The structure of 5 is reported here for the first time. The reactivity of the [bond]CH(2)[bond] moiety of pmp(-) has so far precluded the isolation of 1 although other metal complexes of pmp(-) have been reported years ago. The CH(2) --> C[double bond]O transformation arises from the tendency of the coordinated pmp(-) ligand to achieve further conjugation in the ligand framework and provides a better way to synthesize the metal complexes of bpcaH ligand. Reaction of 3 with NaH affords Fe(II) complex [Fe(bpca)(2)] (4) without any reduction of the ligand frame.     

Charge-transfer phase transition and zero thermal expansion in caesium manganese hexacyanoferrates

A series of caesium manganese hexacyanoferrates is prepared; Cs(I)(1.78)Mn(II)[Fe(II)(CN)6]0.78[Fe(III)(CN)6](0.22) (1), Cs(I)(1.57)Mn(II)[Fe(II)(CN)6]0.57[Fe(III)(CN)6](0.43) (2), Cs(I)(1.51)Mn(II)[Fe(II)(CN)6]0.51[Fe(III)(CN)6](0.49) (3), and Cs(I)(0.94)Mn(II)[Fe(II)(CN)6]0.21[Fe(III)(CN)6](0.70).0.8H2O (4). 1-3 show charge-transfer phase transitions between the high-temperature (HT) and low-temperature (LT) phases with transition temperatures (T(1/2 downward arrow), T(1/2 upward arrow)) of (207 K, 225 K) (1), (190 K, 231 K) (2), and (175 K, 233 K) (3) at a cooling and warming rates of 0.5 K min(-1). Variable temperature IR spectra indicate that the valence states of the LT phases of 1-3 are Cs(I)(1.78)Mn(II)(0.78)Mn(III)(0.22)[Fe(II)(CN)6], Cs(I)(1.57)Mn(II)(0.57)Mn(III)(0.43)[Fe(II)(CN)6], and Cs(I)(1.51)Mn(II)(0.51)Mn(III)(0.49) [Fe(II)(CN)6], respectively. The XRD measurements for 1-3 show that crystal structures of the HT and LT phases are cubic structures (Fm3[combining macron]m), but the lattice constants decrease from the HT phase to the LT phase; a = 10.5446(17) --> 10.4280(7) A (1), 10.5589(17) --> 10.3421(24) A (2), and 10.5627(11) --> 10.3268(23) A (3). The magnetization vs. temperature curves and the magnetization vs. external magnetic field curves show that the LT phases are ferromagnetic with Curie temperatures of 4.3 (1), 5.0 (2), and 5.6 K (3). At a cooling rate of -0.5 K min(-1), 4 does not show the charge-transfer phase transition, but does show a behavior of zero thermal expansion with a thermal expansivity of +0.2 x 10(-6) K(-1) throughout the temperature range 300 and 20 K.     

Electroswitchable photoluminescence activity: synthesis, spectroscopy, electrochemistry, photophysics, and X-ray crystal and electronic structures of [Re(bpy)(CO)3(C[triple bond]C[bond]C6H4[bond]C[triple bond]C)Fe(C5Me5)(dppe)][PF6](n) (n = 0, 1)

A novel heterobimetallic alkynyl-bridged complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)], 1, and its oxidized species, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 2, have been synthesized and their X-ray crystal structures determined. A related vinylidene complex, [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond](H)C[double bond]C)Fe(C(5)Me(5))(dppe)][PF(6)], 3, has also been synthesized and characterized. The cyclic voltammogram of 1 shows a quasireversible reduction couple at -1.49 V (vs SCE), a fully reversible oxidation at -0.19 V, and a quasireversible oxidation at +0.88 V. In accord with the electrochemical results, density-functional theory calculations on the hydrogen-substituted model complex Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C)Fe(C(5)H(5))(dHpe) (Cp = C(5)H(5), dHpe = H(2)P[bond](CH(2))(2)[bond]PH(2)) (1-H) show that the LUMO is mainly bipyridine ligand pi* in character while the HOMO is largely iron(II) d orbital in character. The electronic absorption spectrum of 1 shows low-energy absorption at 390 nm with a 420 nm shoulder in CH(2)Cl(2), while that of 2 exhibits less intense low-energy bands at 432 and 474 nm and additional low-energy bands in the NIR at ca. 830, 1389, and 1773 nm. Unlike the related luminescent rhenium(I)-alkynyl complex [Re(bpy)(CO)(3)(C[triple bond]C[bond]C(6)H(4)[bond]C[triple bond]C[bond]H)], 4, complex 1 is found to be nonemissive, and such a phenomenon is attributed to an intramolecular quenching of the emissive d pi(Re) --> pi*(bpy) (3)MLCT state by the low-lying MLCT and LF excited states of the iron moiety. Interestingly, switching on of the luminescence property derived from the d pi(Re) --> pi*(bpy) (3)MLCT state can be demonstrated in the oxidized species 2 and the related vinylidene analogue 3 due to the absence of the quenching pathway.     

Structures and Chemistry of Methanofullerenes: A Versatile Route into N-[(Methanofullerene)carbonyl]-Substituted Amino Acids

The reaction of C₆₀ with oxadiazole 13 afforded the dimethoxymethanofullerene 7 in 32% yield as a 6-6-ring-bridged isomer with a closed transannular bond. A literature survey showed that all 6-6-ring-bridged methanofullerenes are σ-homoaromatic with a closed transannular bond (6-6-closed) and all 6-5-ring-bridged are π-homoaromatic with an open transannular bond (6-5-open). The preference for 6-6-closed and 6-5-open structures is not due to substituent effects but is best explained with the conservation in these isomers of the favorable bonding seen in C₆₀ with higher double-bond character at 6-6 bonds and higher single-bond character at 6-5 bonds. Reaction of C₆₀ with diazo diester 15 gave the fullerene diester 14 which was hydrolyzed with BBr₃ in benzene to the methanofullerenecarboxylic acid 10 , a versatile synthon for the preparation of amphiphilic fullerene derivatives. Treatment of 10 with alcohols and amino acid esters under DCC coupling conditions afforded the esters 5 and 17 and the amino-acid derivatives 11 and 12 , respectively.     

Can metal ions be used as gas‐phase disulfide bond cleavage reagents? A survey of coinage metal complexes of model peptides containing an intermolecular disulfide bond

The role that a metal ion can have in promoting disulfide bond cleavage has been assessed by surveying the tandem mass spectra of the following metal complexes of model peptides containing an intermolecular disulfide bond: [M--H+Cu(II)](+); [M--H+Cu(II)(bipy)](+); [M+Ag(I)](+); and [M+Au(I)(PMe(3))](+). In comparison to previously studied protonated peptides, these binary and ternary metal complexes generally yield more abundant S--S and/or C--S bond cleavage. In general, [M--H+Cu(II)](+) ions cleave the adjacent C--S bond more readily, while the [M+Au(I)(PMe(3))](+) ion cleaves the S--S bond more readily. The ternary metal complex [M--H+Cu(II)(bipy)](+), on the other hand, fragments by exclusive loss of the bipyridyl ligand for the larger model peptides studied. Of all coinage metal systems studied, Me(3)PAu(+) is superior in promoting disulfide bond cleavage.     

Electrocarboxylation of chloroacetonitrile mediated by electrogenerated cobalt(I) phenanthroline

The electrocarboxylation of chloroacetonitrile mediated by [Co(II)(phen)₃]²⁺ has been investigated. Cyclic voltammetry studies of [Co(II)(phen)₃]²⁺ have shown that [Co(I)(phen)₃]⁺, an 18 electron complex, activates chloroacetonitrile by an oxidative addition through the loss of a phenanthroline ligand to give [RCo(III)(phen)₂Cl]⁺. The unstable one-electron-reduced complex underwent Co–C bond cleavage. In carbon dioxide saturated solution, CO₂ insertion proceeds after reduction of the alkylcobalt complex. A catalytic current is observed which corresponds to the electrocarboxylation of chloroacetonitrile into cyanoacetic acid. Electrolyses confirmed the process and gave faradic yield of 62% in cyanoacetic acid at potentials that are about 0.3 V less cathodic than the one required for Ni(salen).