Remote ultrasonic defectoscopy of sound radiating objects through the air

A method of obtaining ultrasonic images of objects radiating ultrasonic acoustic waves in the air is proposed. Object images are retrieved by spatially matched filtering of the amplitude-phase distribution of the ultrasonic field measured in a planar rectangular region at a distance from the radiating object under investigation. The field is measured at different frequencies in a wide band, which allows one to reduce the level of noise and artifacts in the retrieved images by processing in a wide frequency band.     

Tomographic reconstruction of multiple in-line electron holograms of realistic objects

In theoretical low energy electron point source microscopy, simulated holograms are made and used to reconstruct atomic clusters. In previous investigations, simple test clusters were used for convenience. In this paper we explore more realistic structures composed of a single type of atom such as diamond, graphite and Buckminsterfullerene--all of which consist of carbon atoms. We also examine clusters with two or more distinct atom types, including TiO(2), CuO, Pt(3)O(4), Ga(3)Pt(5), WC, MgCO(3), and MgO. Reconstructions from a single hologram do not give atomic resolution, and consist instead of 'spurious peaks' that are not located at atomic sites, as well as 'atomic peaks' close to atomic sites. Here we apply methods we developed previously to remove all spurious peaks. We show final reconstructions that consist only of atomic peaks located very close to atomic sites.     

Acoustic diagnostics of bubble objects in a liquid

Passive and active linear and nonlinear acoustic methods intended for observation of hydrodynamic cavitation and for bubble object imaging are considered.     

Tomographic microscopy of three-dimensional phase objects in spatially incoherent light

The use of spatially incoherent light is proposed for raising the quality of interference projection data in tomographic microscopy of phase objects. The optical scheme of the tomographic microscope is based on the scheme of a Linnik microinterferometer with an extended source of quasi-monochromatic light. Characteristic features of the tomography of phase objects positioned near flat reflecting surfaces are considered.     

Tomographic imaging of opaque and low-contrast objects in range-independent waveguides.

A feasibility study is presented for acoustic tomographic imaging of arbitrarily shaped objects in range-independent oceanic waveguides. One of the main obstacles in the efficient use of tomographic imaging is that tomographic systems usually allow for a number of different independent solutions which satisfy the same systems of equations. This adverse property of acoustic tomography is especially pronounced in underdetermined systems characterized by null spaces of tomographic matrices which relate measured data to an unknown sound-speed distribution. In fact, acoustic tomography is usually underdetermined and the null space problem becomes critical in many applications. Acoustic tomography in many instances yields blurred images precluding its efficient use for mapping underwater objects in oceanic waveguides. How to improve the resolving power of tomographic imagery in waveguides is shown. A new technique based on the sliding window approach is suggested which uses constrained traveltime inversion. The method will be tested on mapping opaque and low-contrast acoustic objects placed in range-independent waveguides. The method is fast since it does not directly invert tomographic matrices of large rank but instead carries out summation over nonzero elements of tomographic matrices. It can be proved that constrained inversion compensates for limited angular aperture recording and thus can be applied to practical problems with incomplete angular aperture. This work is limited to processing of transmitted signals. A separate study will be devoted to the analysis of reflection data.     

Infrared plasma diagnostics with lasers

Infrared lasers have rendered possible measurements of plasma parameters in a range not accessible using either optical or microwave techniques. Diagnostic methods based on the refraction and scattering of radiation by free electrons are discussed.     

Optical diagnostics of dispersing He plasma

An experimental study has been made of the characteristics of radiation from a dispersing helium plasma. From measurements of the space-time dependence of the line intensities of the helium 2³P — n³D series we obtained the distribution of the populations of the n³D levels for n=3–10. The study has shown that over a wide range of conditions the high-lying levels (n=5–10) are in equilibrium with electrons while a substantial deviation from equilibrium is observed for levels n=3, 4. From the energy distribution of the populations of the upper levels we determined the space-time dependence of the electron temperature, which reflects the process of effective electron cooling during dispersal of the plasma. The gas temperature was estimated from the populations of helium singlet and triplet levels with n=5. The time distribution of the electron density in the plasma was found from the Stark broadening of the spectral lines.Deceased.V. D. Kuznetsov Siberian Physicotechnical Institute, Tomsk State University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 11, pp. 15–19, November, 1992.     

Microwave diagnostics of ultracold neutral plasma

The microwave method is suggested to diagnose the ultracold neutral plasma. Based on the calculations of the dipole radiation, we derive the microwave scattering cross section of the ultracold neutral plasma, and microwave power scattered by the ultracold plasma is calculated as a function of time. The scattering cross section is nearly ¹⁰−11 m².     

脉冲等离子体辐射微波机理的初步研究

 在分析了等离子体辐射微波的电流波形和喇叭天线接收到的微波信号波形的基础上,对脉冲等离子体辐射微波的机理进行了理论分析：阴阳极间存在TEM和TM两种模式的波;流经等离子体的电流产生的磁场使等离子体中的波成为慢波;高频场的激励因素有两个,一是作加速运动的电子,二是阳极斑点溅射时阳极电位突降;同一时刻具有不同速度的电子将能量转换给相应相速的波是其产生超宽带辐射的原因。     

脉冲等离子体辐射微波机理的初步研究

在分析了等离子体辐射微波的电流波形和喇叭天线接收到的微波信号波形的基础上,对脉冲等离子体辐射微波的机理进行了理论分析：阴阳极间存在TEM和TM两种模式的波;流经等离子体的电流产生的磁场使等离子体中的波成为慢波;高频场的激励因素有两个,一是作加速运动的电子,二是阳极斑点溅射时阳极电位突降;同一时刻具有不同速度的电子将能量转换给相应相速的波是其产生超宽带辐射的原因。     

Detection of contrast objects inside biological media by near-field microwave diagnostics

Theoretical and experimental investigations demonstrate the prospects of near-field microwave location of malignant tumors in biological tissue. The theoretical analysis is performed in terms of the theory of near-field location developed for layered structures. The experimental verification of the theory is accomplished by sounding an aqueous medium with a controllable permittivity. The tumor contrast is calculated based on the ideas of the dielectric properties of healthy and affected human tissues. The reason for and the degree of background contrasts as applied to near-field measurements are studied experimentally. An optimal measuring scheme for minimizing the masking effect of background contrasts is proposed. The 2D images of a tumor-simulating contrast object immersed in the aqueous medium at different depths are obtained. The prospects of near-field diagnostics for subsurface temperature measurement are discussed.     

Transient calorimetric diagnostics for plasma processing

We present a detailed study of the Gaussian laser propagation through a dielectric system composed by two right angle prisms. We investigate the transition between the spatial coherence limit, which exhibits wave-like properties and for which the resonance phenomenon can be seen, and the decoherence limit, which exhibits particle-like properties and for which the multiple diffusion occurs. We also analyze the tunneling at critical angles. In our numerical analysis, we shall use BK7 and Fused Silica prisms and a Gaussian He-Ne laser with a wavelength of 632.8 nm and beam waists of 2 mm and 200 μm.     

Magnetic-probe diagnostics for railgun plasma armatures

The author assesses the strengths and weaknesses of the various magnetic-probe techniques currently in use and provides recommendations for future improvements in magnetic probe diagnostics for plasma-armature railguns. Analytic approximations for the dependence of the probe signal on probe location and railgun geometry are presented. Rail current and armature current probes are compared and contrasted with respect to resolution and accuracy. Further improvements in measurement accuracy are predicted for close-spaced magnetic-probe arrays     

Nonlinear optical techniques for plasma diagnostics

The application of various nonlinear optical laser spectroscopic techniques to plasma diagnostics are reported. The techniques discussed in this paper are two-photon laser induced fluorescence spectroscopy, double-resonant four-wave mixing, coherent anti-Stokes Raman-scattering (CARS), and a combination of emission spectroscopy and CARS. They are applied to measurements of atomic hydrogen densities, molecular temperature, chemical composition, electric field distributions, and vibrational population distribution. The basic principles are described and important aspects of the methods are discussed in context with application to various kinds of discharges at low and elevated pressures     

In-situ diagnostics for plasma surface processing

A survey is given of in-situ diagnostics of plasma and surface for application in plasma etching and deposition. Especially those diagnostics that increase the fundamental understanding of the elementary processes occurring both within the plasma and at the surface are highlighted. In general, diagnostics are performed to determine the value of a physical parameter. This value is fed into models of plasma or surface, and in that way the understanding of the process is enhanced. In the paper first the most interesting physical parameters are defined. Subsequently the diagnostic techniques currently available to determine those parameters are reviewed.     

Nonlinear optical effects for plasma diagnostics

Experimental investigations show that the 1/f noise intensityC and the contact resistanceR can be used to analyse contacts. The simply prepared contacts are fritted by discharging a capacitor, resulting in a multi-spot contact. A model relatesC andR to a number of contact spotsk with radiusa. More impulse-frittings at increasing energies decreaseC andR, thus enhancing the values ofk anda. From experimentalC vsR plots two regions are determined for GaAs: A fritting (a=constant) and A+B fritting (a∝k). Calculated values ofk are in good agreement with the number of peaks or pits formed by etching the semiconductor surface. From experimentalC vsW orR vsW curves, withW the cumulative impulse-fritting energy, the conclusion can be made thatka ³ is proportional toW.     

Microwave diagnostics of a deuterium afterglow plasma

The electron number density, N_e, was measured by interferrometry with a signal of 9.531 GHz. The time decay of N_e indicated that electron-ion recombination was important with a recombination coefficient α_r = 1.1 X 10^-6cm³sec^-1.     

Visualization and diagnostics of thermal plasma flows

Flow visualization is a key tool for the study of thermal plasma flows. Because of their high temperature and associated self emission, standard and high speed photography is commonly used for flow and temperature field visualization. Tracer techniques through the injection of a seed powder in the plasma flow have also been often used for the study of flow structure. Shadowgraphs and Schlieren techniques have been used particularly when cold flow regions are present in the close proximity of the plasma discharge. They also provide key information about the flow structure in the fringes of the discharge. Laser strobe techniques are commonly used for the characterization of particle trajectories under plasma conditions. A brief review is presented of available plasma and particulate diagnostic techniques with detailed measurements reported for a radio frequency (r.f.) induction plasma discharge using enthalpy probe techniques.