障碍物后周期性Bottlebeam的自重建

本文分析了由两束贝塞尔（Bessel）光相干产生的周期性局域空心光束（Bottlebeam）遇到障碍物后的自重建特性．由汉克尔波理论分析了自重建的原理,利用衍射积分理论数值模拟了轴上圆形障碍物对光束传输的影响．结果表明,周期性Bottlebeam遇到障碍物遮挡时具有自重建特性,重建后的光束依然保持着障碍物前的光强分布特性．研究结果对于利用周期性Bottlebeam实现微粒的多层面操控具有特殊意义．     

非相干光源无衍射光的自重建

基于Hankel 波理论分析了非相干光源产生Bessel光束的自重建特性, 利用光学设计软件ZEMAX模拟了Bessel光束经过轴上圆形障碍物后的截面光强分布. 由于发光二级管(LED) 具有一定的频谱宽度且不像激光具有很高的相干度, 因此我们采用一定频宽范围的连续谱来描述. 从模拟结果可以直观地看出Bessel光束被轴上圆形障碍物遮挡后逐步完成自重建, 说明用LED非相干光作为光源具有自重建特性.实验上采用LED和轴棱锥元件产生Bessel光束, 然后通过轴上圆形障碍物、轴上方形障碍物, 并拍摄了不同位置处的截面光强分布图, 证实了非相干光源产生Bessel光束的自重建特性.实验结果和模拟结果相符合. 关键词： 无衍射光束 LED光源 轴棱锥 自重建     

轴棱锥对无衍射光束的线聚焦特性

基于汉克尔波理论和衍射积分理论详细分析了轴棱锥对无衍射光束的线聚焦特性, 提出了一种产生周期性局域空心光束的新方法, 即无衍射贝塞尔光束经过轴棱锥聚焦后产生具有塔尔博特效应的局域空心光束. 数值模拟了无衍射贝塞尔光束照射轴棱锥后, 沿传输距离变化的光强分布及一个周期内光强的演变和局域空心光束的形成过程. 设计实验系统, 由He-Ne激光经过一套光学系统后透过轴棱锥, 产生近似无衍射贝塞尔光束, 再由第二个轴棱锥对产生的无衍射贝塞尔光束进行线聚焦, 在第二个轴棱锥后面由显微镜观测到周期性局域空心光束, 并用CCD照相机拍摄了两个周期内的光斑图, 实验结果和理论分析相符合. 研究结果可用于多层面微粒的操控, 对周期性局域空心光束在光学微操控领域的应用具有重要的指导意义. 关键词： 贝塞尔光束 轴棱锥 线聚焦 局域空心光束     

无衍射 Mathieu光束自重建特性的理论和实验研究

首次对无衍射Mathieu光束的自重建特性进行理论和实验研究, 利用Mathieu-Hankel波理论分析了Mathieu光束的自重建机理. 基于菲涅尔衍射积分理论, 推导出了高斯吸收型圆形障碍物部分遮挡后的Mathieu光场重建后的解析表达式, 并数值模拟了无衍射Mathieu光束的经圆形障碍物部分遮挡后光场的自重建过程. 采用柱透镜-轴棱锥组合光学系统产生近似零阶无衍射Mathieu光束, 实验分别验证了轴上和轴外障碍物遮挡时近似零阶无衍射Mathieu光束的自重建特性. 理论模拟与实验结果相符.     

像散Bessel光束自重建特性的理论和实验研究

基于菲涅耳衍射积分理论和巴比涅原理,推导出像散Bessel光束经圆形障碍物后的光强分布一般表达式.数值模拟了像散Bessel光束经圆形障碍物遮挡后光场的自重建过程,并设计相关实验进行验证,实验结果与理论模拟基本符合.结果表明：零阶像散Bessel光束经过轴上和离轴障碍物后均会发生光束重建现象.随着传输距离的增加,像散Bessel光束的外轮廓尺寸变大、中心光点阵列数增多,逐渐重建出不同于障碍物前的完整光束.并且观察到光束在重建过程中横向和纵向的重建速度并不一致,存在一定的速度差.利用螺旋相位板产生高阶像散Bessel光束,验证了高阶像散Bessel光束经障碍物遮挡后同样具有自重建特性.研究结果对像散Bessel光束在多层面粒子操纵方面的应用具有参考价值.     

角向偏振无衍射光束的传输特性及其偏振态研究

从理论和实验两个方面研究角向偏振无衍射光束在自由空间和障碍物空间中的传输特性. 理论上模拟了角向偏振无衍射光束在自由空间以及障碍物空间传播过程中的光强分布与偏振态变化情况. 实验中利用高斯光束先通过偏振转换仪, 再入射到轴棱锥上产生角向偏振无衍射光束. 进而研究其在空间中的传输情况, 并通过分析其经过扇形障碍物后光强分布变化情况讨论障碍物对偏振态的影响和光束的自重建特性. 结果表明: 障碍物遮挡区域光强沿z轴方向逐渐恢复, 且阴影区域沿障碍物所在位置的相反方向移动; 光束的偏振态局部发生变化, 该变化与障碍物所在位置有关. 理论仿真和实验结果一致.     

相干贝塞尔光产生具有塔尔博特效应的局域空心光束

提出一种由轴棱锥产生的贝塞尔光干涉整形得到具有自成像塔尔博特效应的近似无衍射局域空心光束的新方法。详细分析了两束相干同频率贝塞尔光的相互作用原理及其如何控制局域空心光束的空间尺寸。数值模拟了干涉叠加后光场沿传输距离变化的光强分布及一个完整周期内光强的演变和局域空心光束的形成过程,给出了相干贝塞尔光产生局域空心光束的个数及局域空心光束最大无衍射距离的表达式。     

环形障碍物-轴棱锥产生局域空心光束

提出一种产生局域空心光束(bottle beam)的新方法,它是在传统的轴棱锥底面上放置一个环形障碍物.平面波入射到带有环形障碍物的轴棱锥底面时,将在轴棱锥产生的最大无衍射距离内形成bottle beam,而在bottle beam的前后仍然保持无衍射贝塞尔光.通过变化障碍物大小及轴棱锥底角实现bottle beam尺寸的控制.利用衍射理论描述了平面波经带有环形障碍物的轴棱锥产生bottle beam的原理,分析和模拟了传输过程中不同位置的截面光强分布及整个过程的三维光强分布,并给出相关的实验结果.研究结果对bottlebeam的实际应用具有积极的意义.     

圆顶轴棱锥底角及焦距对局域空心光束的影响

从衍射理论导出圆顶轴棱锥后的光场分布,用软件对圆顶轴棱锥后的光强进行仿真,结果表明,圆顶轴棱锥可以得到多个局域空心光束。分别改变圆顶轴棱锥的底角和顶端平凸透镜的焦距,再用软件对圆顶轴棱锥后的光强进行仿真,所得光强分布表明,圆顶轴棱锥的底角影响局域空心光束的周期和暗域数量,而顶端平凸透镜的焦距主要影响局域空心光束中暗域的数量,对周期几乎没有影响。在实际应用中可通过调节参量得到所需要局域空心光束。     

轴棱锥——透镜系统的光束传输与变换

对平面波经过轴棱锥--透镜系统的整个演绎过程进行详细的理论分析,数值模拟和实验验证.平面波经过轴棱锥产生横向光场不变的近似无衍射光,在最大无衍射距离内加入合适透镜将产生局域空心光束(Bottlebeam),而空心光束的尺寸可通过改变透镜焦距进行控制.当光束继续传播,贝塞尔(Bessel)光发生自重建(Self-reconstruction),但重建的Bessel光将会发散,光强随着传播距离增大而迅速下降,且中心亮斑尺寸也迅速增大.通过引入另一聚焦透镜对光束进行修正,恢复了Bessel光束的无衍射的特性.利用显微镜-CCD光束分析系统获得不同传播距离的截面光强分布,实验结果和理论分析及数值模拟相吻合.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.