共查询到20条相似文献,搜索用时 31 毫秒
1.
光纤光栅弹簧管压力传感器的压力和温度特性 总被引:14,自引:0,他引:14
本文利用弹簧管对于压力的机械放大作用,将弹簧管与光纤光栅悬臂梁调谐技术相结合,研制了一种新颖的光纤光栅弹簧管压力传感器,大大提高了光纤布喇格光栅对压力测量的灵敏度,压力灵敏度系数可达-1.79×10-4/MPa,比裸光栅提高了两个数量级,在0~12MPa的压力范围内,光纤布喇格光栅中心反射波长的改变与压力成良好的线性关系.同时由于悬臂梁热膨胀效应的影响,光纤光栅的温度灵敏度提高为裸光栅的7倍. 相似文献
2.
光纤布喇格光栅沉降传感器 总被引:1,自引:1,他引:1
根据光纤布喇格光栅的光学传感原理,提出了一种基于悬臂梁及金属弹性膜片的光纤布喇格光栅沉降传感器结构,对其传感特性进行了实验研究.实验通过产生水的液位差来模拟地基沉降,分析结果显示,光纤布喇格光栅中心反射波长漂移对液位差呈现良好的线性关系,线性度高于0.999,灵敏度可达-2.11 pm/mm.通过改变悬臂梁厚度和有效长度,可以对传感器测量范围和灵敏度进行调整,以满足各种应用场合.综合实验结果,该传感器在桥梁、铁路地基等沉降监测方面具有重要意义. 相似文献
3.
采用非相干光作为光源,以平面镜为反射面,对光纤位移 振动传感器的性能进行研究。推导出光纤输出功率与测量距离的解析表达式,并详细探讨了不同光纤半径、光纤数值孔径、发射光纤和接收光纤间距、发射光纤和接收光纤轴线夹角下输出功率比与测量距离之间的内禀关系。仿真结果表明:光纤半径越小,光纤间距越大,可以测试的距离范围越小;光纤数值孔径、光纤轴线夹角越小,可以测试的距离范围越小。通过分析不同情况下,输出功率比随测量距离变化的关系,可以在实际工程应用中根据测量需要选择设计合适的传感器。此外,还对测量误差进行了分析,得到光纤轴线夹角越小,测量距离的范围越大,误差率越小,当光纤轴线夹角为0.25时,误差率约为1%。 相似文献
4.
5.
In this paper, an attempt to use a multimode optical fiber sensor in tomography is made. Two types of lens, one sphere and one cylinderical, are designed for two terminals of the fiber. It solves the problem of insufficient power collection of natural light beam using current fiber with polished terminals. A theoretical analysis of the relationships among the sphere lens radius, the cylinderical lens radius, the refractive index of the fiber is carried out. The relationship between the scanning angles and the number of the optical fibers is experimentally investigated in the air medium. 相似文献
6.
光纤振动传感器探头的设计 总被引:2,自引:0,他引:2
提出和论述了一种光纤振动传感器的原理和探头设计方法。使用悬臂梁来遮挡反射回光纤的光 ,用光强度调制来实现振动信号的测量。这种传感探头只需一根光纤引出 ,紧凑小巧 ,易于安装调试。结果表明 ,这种光纤振动传感器传感头是可靠而耐用的 ,长时间工作稳定 ,抗外界干扰强 ,易制作 ,易安装。 相似文献
7.
8.
9.
《中国光学快报(英文版)》2021,(9)
The femtosecond laser has been an efficient tool for optical fiber high temperature sensor construction. Here, we review the progress of optical fiber high temperature sensors based on femtosecond laser fabricated fiber gratings and various types of fiber in-line interferometers in silica fibers and sapphire fibers. 相似文献
10.
In this paper, recent progress in the investigation of photosensitivities of polymer optical fibers and the development of polymer optical fiber grating is reported. Photosensitivities in various polymer fibers, including doped and undoped, multimode and single-mode polymer fibers, have been experimentally characterized and evaluated for fiber grating application. In particular, the wavelength dependence of material absorption and photosensitivity has been found essential to the fabrication of polymer optical fiber grating. Based on the results of photosensitivity research, polymer optical fiber gratings have been successfully fabricated. More importantly, polymer optical fiber grating has been demonstrated highly tunable, with a tuning range more than 70 nm. The unique feature of high tunability in polymer optical fiber grating has great potential in various applications including optical fiber WDM systems and fiber sensor systems. Several important issues that remain to be investigated will also be discussed. 相似文献
11.
12.
In this paper, recent progress in the investigation of photosensitivities of polymer optical fibers and the development of polymer optical fiber grating is reported. Photosensitivities in various polymer fibers, including doped and undoped, multimode and single-mode polymer fibers, have been experimentally characterized and evaluated for fiber grating application. In particular, the wavelength dependence of material absorption and photosensitivity has been found essential to the fabrication of polymer optical fiber grating. Based on the results of photosensitivity research, polymer optical fiber gratings have been successfully fabricated. More importantly, polymer optical fiber grating has been demonstrated highly tunable, with a tuning range more than 70 nm. The unique feature of high tunability in polymer optical fiber grating has great potential in various applications including optical fiber WDM systems and fiber sensor systems. Several important issues that remain to be investigated will also be discussed. 相似文献
13.
Miniature optical fiber sensors with thin films as sensitive elements could open new fields for optical fiber sensor applications. Thin films work as sensitive elements and a transducer to get response and feedback from environments, in which optical fibers act as a signal carrier. A novel Ag coated intensity modulated optical fiber sensor based on refractive index changes using IR and UV-Vis(UV-visible) light sources is proposed. The sensor with an IR light source has higher sensitivity compared to a UV-Vis source. When the refractive index is enhanced to 1.38, the normalized intensity of IR and UV-Vis light diminishes to 0.2 and 0.8, respectively. 相似文献
14.
15.
The mark-tracking method was used in the uniaxial tensile test to determine the elastic properties of optical fibers. The mark-tracking method is based on the follow-up of two markers on the specimen with the help of an image processing technique. It allows us to determine the true strain with respect to the small strains assumption (≤1%) or the finite strains (>1%) without any impact of the rigid solid movement or pulley fiber sliding on the measured strain. Both coated optical fiber and stripped fiber were subjected to the uniaxial tensile test and the cantilever beam bending test. The Young’ modulus results of the stripped fiber were found to be very similar for both tests. Thus, the mark-tracking method is adaptable to the tensile test of optical fibers and the elastic behaviors of both coated optical fiber and stripped fiber are found to be non-linear. Their Young's moduli are 22 and 79 GPa, respectively. These results revealed that those coatings play a mechanical role in fiber elongation. 相似文献
16.
基于荧光淬灭原理的光纤氧传感器一直是许多研究工作的重点。介绍了一种制作简单、成本低的光纤氧传感器制造方法。该方法基于荧光淬灭原理,在光纤末端涂覆荧光材料铂八乙基卟啉(PtOEP)实现的。传感器中荧光材料被395nm的紫光激发,并由Y形光纤引导,使用广州犀谱光电USB2000+光谱仪记录荧光的发光强度时序图。最后得到的PtOEP的(I0/I100)-1的值为0.78,即光纤氧传感器的灵敏度为0.78,而且,斯特恩-沃尔默(Stern-Volmer)图显示出很好的线性特性。从氧气到空气环境的响应时间为24 s,从空气环境到氧气的响应时间是5 s。结果表明,基于荧光淬灭原理的光纤氧传感器具有较高的灵敏度和更快的响应时间。 相似文献
17.
An optical fiber twist sensor based on Sagnac single-mode optic fiber interferometer is proposed. The stress-induced birefringence of single-mode optical fiber is obtained by applying a transverse force against a short length of singlemode fiber. A high sensitivity and resolution of the twist angle measurement of 0.19 nm/° and 0.002° is achieved experimentally, respectively. The proposed sensor is more convenient and simple than that of standard polarization-maintaining fibers. 相似文献
18.
海水盐度和温度实时检测的新型光纤传感器研究 总被引:8,自引:0,他引:8
提出了一种新颖的用于海水温度和盐度同时实时探测的光纤传感器系统。分别利用半导体材料吸收光谱的临界极限值随温度变化发生移动而导致出射光强改变的特性和待测液体盐度变化引起传输光折射角改变导致接收端光线偏移的性质,通过反射式的结构设计和线阵排列的接收光纤信号传输至海面以上,并由CCD实现对光强峰值信号及其偏移量的采集。传感器由一直角棱镜、本征GaAs单晶体薄片、装有参考液和待测液的水槽、接收光纤阵列等部分组成。理论分析和仿真结果验证了传感器设计的可行性。 相似文献
19.
20.
Designing optical-fiber modulators by using magnetic fluids 总被引:1,自引:0,他引:1
To reduce interface loss between optical fibers and devices in telecommunication systems, the development of an optical-fiber-based device that can be fused directly with fibers is important. A novel optical modulator consisting of a bare fiber core surrounded by magnetic fluids instead of by a SiO2 cladding layer is proposed. Applying a magnetic field raises the refractive index of the magnetic fluid. Thus we can control the occurrence of total reflection at the interface between the fiber core and the magnetic fluid when light propagates along the fiber. As a result, the intensity of the outgoing light is modulated by variation in field strength. Details of the design, fabrication, and working properties of such a modulator are presented. 相似文献