改性介孔材料SBA-15对水、甲苯和单体混合物的吸附和释放研究

以不同类型的硅烷偶联剂对自制的介孔分子筛SBA-15进行了改性,研究了改性介孔材料SBA-15对水、甲苯和双环戊二烯(DCPD)/苯乙烯(St)(DCPD/St=9/1,体积比)单体混合液(DS)的吸附和释放性能。研究发现,改性前,SBA-15吸附水和甲苯的量相差不大,而吸附单体混合物量较多;使用硅烷偶联剂改性后,吸附量均下降,但是吸附速率提高,吸附量较小者吸附速度较快。介孔材料对甲苯的释放速率是对水和DS的100倍左右,改性介孔材料提高了对吸附质的释放速率;吸附和释放均符合准二级吸附动力学方程。     

改性介孔材料SBA-15对甲基丙烯酸甲酯与苯乙烯的吸附与释放研究

考察了不同偶联剂改性的介孔材料SBA-15对甲基丙烯酸甲酯(MMA)和苯乙烯(St)的吸附与释放性能,研究了在室温条件下的吸附与释放动力学行为。结果表明,偶联剂的表面改性使介孔材料对MMA和St的饱和吸附量明显降低,而吸附率与释放率升高;介孔材料释放速率先快后慢,释放量最后趋于平衡;改性介孔材料SBA-15对吸附质吸附行为符合准二级吸附动力学方程,释放行为符合一级释放动力学方程。最大释放量实验值与拟合的理论值较为吻合。介孔材料对St的释放时间要远长于MMA。     

铝离子和钛离子化学改性MCM-41介孔材料的制备及其对污水中镉离子的吸附性能(英文)

通过在MCM-41材料中引入Al 3+和Ti 4+两种诱因金属离子合成了化学改性介孔材料Al-Ti-MCM-41和Ti-Al-MCM-41;评价了两种介孔材料对污水中镉离子的吸附行为.利用氮气吸附-脱附等温线对Al-Ti-MCM-41(1∶1)样品的吸附行为进行了详细分析,考察了吸附剂投加量、Cd2+初始质量浓度和吸附温度对其吸附行为的影响.结果表明:改性Al-Ti-MCM-41(1∶1)介孔材料的最可几孔径和比孔容分别为16nm和0.04cm3/g,由BJH法计算得到的平均孔径为17.02nm;其对污水中Cd2+的吸附率达99.8%.Cd2+的吸附率随Al-Ti-MCM-41(1∶1)介孔材料投加量的增加先增加而后降低最终达到平衡,吸附容量随Cd2+初始浓度的增大而增加;吸附温度对吸附行为基本无影响.     

甲基官能化介孔固相微萃取涂层的合成与表征

采用一步法在碱性条件下以十六烷基三甲基溴化铵(CTAB)为模板剂,用正硅酸乙酯(TEOS)和甲基三甲氧基硅烷(MTMS)直接缩合制备了甲基改性的无机/有机介孔复合材料(Me-MCM-41),并用红外光谱(FTIR)、小角X射线衍射(SAXRD)、热重分析(TGA)、透射电镜(TEM)和氮气吸附-脱附等方法对样品进行了表征。结果表明,甲基成功键合至介孔材料孔道表面形成了无机/有机介孔复合体,该复合体不仅保持了MCM-41高度有序的的二维六方孔道结构,而且还具有较强的疏水性、较高的热稳定性,以及较大的比表面积、孔容和孔径。该材料作为固相微萃取的涂层与高效液相色谱联用对邻苯二甲酸二丁酯(DBP)具有较高的萃取效率。     

MCM-41介孔材料负载金属的一步法合成及其对酯化反应的催化作用

以增溶了茂金属的十六烷基三甲基溴化铵(CTAB)胶束为模板, 采用一步法合成了介孔表面负载有金属(铁、钛和锆)的介孔材料MCM-41, 通过等离子体电感耦合发射光谱仪(ICP-AES)测定铁、钛和锆负载量(质量分数)分别为1.71%、0.95%和0.81%. 通过X射线衍射(XRD)图谱和N₂吸脱附等温线可知, 负载金属的介孔材料M-MCM-41(T) 仍具有较高的比表面以及规整的六方有序孔道结构, 去除模板剂的焙烧温度对孔道结构有一定影响. 由一步法合成的金属负载介孔材料对乙酸正丁酯的酯化反应具有很高的催化活性, 其中Fe-MCM-41在单位时间单位金属催化生成的产物量(TOF)为55643 g·h^-1·g^-1, 而Zr-MCM-41的TOF高达125320 g·h^-1·g^-1. 与纯茂金属相比, 由茂金属合成的金属负载介孔材料可显著提高酯化反应的催化活性.     

微孔/介孔复合分子筛的合成及其对CO2的吸附性能

采用两步晶化法将合成的沸石前驱液(S)或沸石固体粉末(P)经不同浓度(c)的NaOH处理后, 分别以表面活性剂十六烷基三甲基溴化铵(CTAB)软模板或介孔炭(Meso-C)硬模板为导向剂, 自组装合成S-β-MCM41(c)、P-β-MCM41(c)、P-ZSM-MCM41(c)、P-ZSM-C系列微孔/介孔复合分子筛. 考察了沸石分子筛种类、碱处理液浓度以及介孔模板剂对合成复合分子筛结构与性能的影响. X射线衍射(XRD)、透射电子显微镜(TEM)和氮气吸附-脱附表征结果表明产物具有微孔/介孔多级孔结构. 该材料对CO₂的吸附能力比纯微孔或介孔材料均有明显提高, 其中P-ZSM-MCM41(2)的CO₂吸附容量最大可达1.51 mmol·g^-1, 为ZSM-5沸石吸附量的两倍多.     

MSU-SMFI和MCM-41的催化裂化及烷基化活性比较

以MFI沸石前驱体作为基本结构单元组装介孔硅铝分子筛MSU-S_MFI. XRD和氮气吸附数据表明MSU-SMFI具有类似MCM-41的六方排列介孔孔道结构,而且其织构参数和以传统方法合成的含铝MCM-41也大体相当.NH₃-TPD显示由沸石前驱体组装的MSU-S_MFI较硅铝比相同的含铝MCM-41介孔分子筛的固体酸量显著提高.MSU-S_MFI上的异丙苯催化裂化转化率比含铝MCM-41提高31％, 1,3,5-三异丙苯在MSU-S_MFI上也发生了更深的裂解. MSU-S_MFI上萘的叔丁基化的转化率比含铝MCM-41提高了15％.以沸石前驱体作为基本结构单元是提高介孔分子筛固体酸性的有效方法.     

香草醛异烟酰腙与钴、镍、铜、锌和镉配合物的合成和性质研究

本文合成了香草醛异烟酰腙(H₂L^Ⅰ)和邻香草醛异烟酰腙(H₂L^Ⅱ)与钴(Ⅱ)、镍(Ⅱ)、铜(Ⅱ)、锌(Ⅱ)和镉(Ⅱ)的九个新配合物:M(HL^Ⅰ)₂·nH₂O[M(Ⅱ)=Co、Ni、Cu、Zn和Cd,n=0,2]和M(HL^Ⅱ)₂·nH₂O[M(Ⅱ)=Co、Ni、Cu和Zn,n=0-3]。采用     

Fe3+掺杂TiO2光催化降解聚乙烯薄膜的研究

以快速溶胶-凝胶法制备了纳米TiO₂光催化剂，并用Fe³⁺对其掺杂改性，在室温条件下, 用于固相光催化降解聚乙烯(PE)包装薄膜的研究. 对催化剂和薄膜进行了X衍射分析(XRD)、傅立叶红外光谱分析(FT-IR)、扫描电子显微镜(SEM)形貌观察. 结果表明， 60 W紫外光辐射240 h后， PE失重为8.43%, 锐钛矿型纳米TiO₂光催化剂使PE失重30.66%；用Fe³⁺掺杂后，0.5%Fe₂O3/TiO₂、1.0%Fe₂O₃/TiO₂和2.0%Fe₂O3/TiO₂分别使PE失重35.91%、20.72%和13.30%. 光催化剂加速了PE的失重，碳链的断裂和光氧化腐蚀，在薄膜表面形成大量的坑洞，降解产物中的小分子量的石蜡含量明显增高. Fe³⁺掺杂有一个最佳量， 0.5%Fe₂O3/TiO₂光催化降解PE的活性最高.     

SBA-15介孔分子筛的乙基化修饰

20世纪90年代初,美孚公司的研究者们用烷基季铵盐阳离子表面活性剂作模板剂,在碱性条件下合成出M41S系列介孔分子筛。近几年,合成出了MCM,HMS,MSU、SBA等硅基分子筛系列。由于介孔材料表面有许多端羟基,可用来固定活性基团,使其在吸附、分离、催化和主客体化学等方面具有广泛的潜在应用价值。对介孔材料孔道进行有机改性的无机-有机复合材料的研究正在兴起,本文采用分步合成法,以乙基三乙氧基硅烷为偶联剂,     

NSAID naproxen in mesoporous matrix MCM-41: drug uptake and release properties

Hexagonally ordered mesoporous silica material MCM-41 (S_BET?=?1090?m²/g, pore size?=?31.2 ?) was synthesized and modified by 3-aminopropyl ligands. The differences in an uptake and subsequent release of anti-inflammatory drug naproxen from unmodified and amino modified MCM-41 samples were studied. The prepared materials were characterized by high resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM), nitrogen adsorption/desorption, Fourier-Transform Infrared Spectroscopy (FT-IR), Small-angle X-ray scattering (SAXS), thermoanalytical methods (TG/DTA) and elemental analysis. The amount of the drug released was monitored with thin layer chromatography (TLC) with densitometric detection in defined time intervals. The amounts of the released naproxen from mesoporous silica MCM-41/napro and amine-modified silica sample A-MCM-41/napro were 95 and 90% of naproxen after 72?h. In this study we compare the differences of release profiles from mesoporous silica MCM-41 and mesoporous silica SBA-15.     

Characterization of methylated nanoscale MCM-41 material

In this study, nanoscale MCM-41 molecular sieve was prepared under a basic condition by a hydrothermal method using cetyltrimethylammonium bromide as a template and tetraethyl orthosilicate as a silica source. Methylated nanoscale MCM-41 molecular sieve was prepared from the nanoscale MCM-41 by post-synthesis method using trimethylchlorosilane (TMCS) as coupling agent. The product was characterized by means of element analysis, powder X-ray diffraction, Fourier transform infrared (FT-IR) spectroscopy, low-temperature nitrogen adsorption-desorption technique at 77 K, scanning electron microscopic (SEM), thermogravimetry-differential thermal analysis (TG-DTA). Powder XRD showed that the framework of the molecular sieve was well retained and the degree of ordering of the methylated MCM-41 decreases. IR spectra and the low-temperature nitrogen adsorption-desorption technique suggested that methyl was successfully grafted to the inner surface of the methylated MCM-41 and the mesoporous channels of the methylated MCM-41 were still maintained. Scanning electron microscopic results showed that the average size of the methylated MCM-41 prepared was 112 nm. Differential thermal analysis showed that the prepared material has preferable thermal stability and the methylated MCM-41 can be stable at 903 °C.     

Amine decorated 2d hexagonal and 3d cubic mesoporous silica nanoparticles: A comprehensive dissolution kinetic study in simulated and biorelevant media

Highly ordered Bexarotene (BXR) encapsulated mesoporous silica nanoparticles in particular bare and amine functionalized MCM-41 and MCM-48 were designed employing a novel impregnation solvent evaporation strategy. The outcomes unveiled successful synthesis of mesoporous assembly having 2?D hexagonal and 3?D cubic framework for MCM-41 and MCM-48 respectively withholding large surface area, optimum pore size, pore volume along with uniform particle size distribution. Additionally, SXRD and TEM findings divulged retention of characteristic mesoporous features regardless of surface modification and drug incorporation. Eventually the release profile and release kinetics results in different dissolution media demonstrated complete drug release in simulated intestinal fluid (SIF) within 75?min and 45?min from BXR-41 and BXR-48 along with 3.33 and 5 fold increment in dissolution profile. Furthermore, lack of any interaction between gelatin of hard capsule shell and amine group in presence of enzyme were justified from the indistinguishable release pattern in enzyme free and enzyme enriched SIF media. The divergent release pattern in fed and fasted state condition having a higher release in former media strongly directs towards taking medicine after meal. Finally the release kinetics study exhibited Weibull and Higuchi model as a best fit models for bare and amine coated BXR nanoparticles respectively.     

Electron microscopy study of novel Pt nanowires synthesized in the spaces of silica mesoporous materials.

Structures of Pt-nanowires, synthesized in channels of silica mesoporous materials MCM-41, SBA-15 and MCM-48, were investigated by transmission electron microscopy. One dimensional (1D) Pt-nanowires were formed inside the channels of the MCM-41, and were single crystals with a length of several tens to several hundreds nanometers and a diameter of ca. 3 nm pt-nanowires synthesized in SBA-15 formed a new 3D-network following 3D-pore geometry of SBA-15; that is, the main 1D-channels are interconnected to each other through randomly distributed tunnels. These Pt-nanowires showed a well single crystalline. MCM-48 has two non-intersecting chiral channels, and Pt-networks were mostly formed in one of the two channels. Therefore the networks were also chiral; however, the chirality of Pt-networks remained to be determined. It was shown that all Pt-nanowires were formed following the channel geometries of silica mesoporous materials used.     

萘普生在介孔分子筛MCM-41中的负载及其溶出性能

用含氨基的偶联剂修饰介孔分子筛MCM-41的表面,将修饰前和修饰后的介孔分子筛分别负载难溶性药物萘普生（NAP）,利用X射线衍射、傅里叶变换红外光谱、差示扫描量热分析、扫描电子显微镜、透射电子显微镜和N2吸附 脱附分析等技术分别对其进行了结构表征和性能测试。 结果表明,药物分子存在于分子筛的孔道中。 负载在MCM-41中的萘普生溶出速率远优于原料药,60 min时大约溶出70%。 氨基修饰后的药物释放速率比修饰前有所减慢,表明可通过氨基修饰调节释放速率。     

Effect of amine functionalization of spherical MCM-41 and SBA-15 on controlled drug release

MCM-41 and SBA-15 silica materials with spherical morphology and different particle sizes were synthesized and modified by post-synthesis method with 3-aminopropyltriethoxysilane (APTES). A comparative study of the adsorption and release of a model drug, ibuprofen, were carried out. The modified and drug loaded mesoporous materials were characterized by XRD, TEM, N₂ physisorption, thermal analysis, elemental analysis and FT-IR spectroscopy. Surface modification with amino groups resulted in high degree of ibuprofen loading and slow rate of release for MCM-41, whereas it was the opposite for SBA-15. The adsorbed drug content and the delivery rate can be predetermined by the choice of mesoporous material with the appropriate structural characteristics and surface functionality.     

介孔分子筛孔道结构对药物巯甲丙脯酸释放性能的影响

以巯甲丙脯酸为药物模型, 研究了不同孔道结构的介孔分子筛载体的药物释放性能.     

介孔材料氨基表面修饰及其对CO2的吸附性能

采用接枝方法在介孔材料MCM-41和SBA-15的孔道内表面进行氨基化修饰, XRD、29Si-NMR、FT-IR、TGA、BET等测试结果表明, 氨丙基三乙氧基硅烷(APTS)和氨乙基氨丙基甲基二甲氧基硅烷(AEAPMDS)都分别接枝在介孔材料的孔道内, 表面氨基修饰量约为1.5-2.9 mmol·g-1. 表面修饰后介孔材料的孔道仍高度有序, 但比表面积减小. 表面修饰前后介孔材料对CO2的吸附性能发生显著变化, 由于物理吸附转化为以氨基为活性中心的化学吸附, 吸附量从修饰前的0.67 mmol·g-1提高到2.20 mmol·g-1.     

中孔沸石新材料MCM－41──Ⅰ．合成、酸性及稳定性

中孔沸石新材料ＭＣＭ－４１──Ⅰ．合成、酸性及稳定性赵修松，王清遐，徐龙伢，谢紊娟（中国科学院大连化学物理研究所，大连１１６０２３）李新生（中国科学院大连化学物理研究所催化基础国家重点实验室，大连１１６０２３）关键词ＭＣＭ－４１沸石，合成，酸性，稳定...     

中孔硅酸盐材料MCM-41的合成与表征研究(英文)

以十六烷基三甲基溴化铵为模板剂,硅酸钠为硅源,铝酸钠为铝源,在水热条件下成功地合成出了ＭＣＭ－４１中孔硅酸盐材料。采用ＸＲＤ、低温Ｎ２吸附脱附等测试手段对合成的ＭＣＭ－４１样品进行了表征。通过优化合成条件,合成出孔径３.２ ｎｍ、比表面９０４ｍ２／ｇ和孔壁厚约１.４６ ｎｍ的ＭＣＭ－４１分子筛。催化活性测定采用微反应活性实验来评价其活性和选择性。