Fe3+掺杂TiO2光催化降解聚乙烯薄膜的研究

以快速溶胶-凝胶法制备了纳米TiO₂光催化剂，并用Fe³⁺对其掺杂改性，在室温条件下, 用于固相光催化降解聚乙烯(PE)包装薄膜的研究. 对催化剂和薄膜进行了X衍射分析(XRD)、傅立叶红外光谱分析(FT-IR)、扫描电子显微镜(SEM)形貌观察. 结果表明， 60 W紫外光辐射240 h后， PE失重为8.43%, 锐钛矿型纳米TiO₂光催化剂使PE失重30.66%；用Fe³⁺掺杂后，0.5%Fe₂O3/TiO₂、1.0%Fe₂O₃/TiO₂和2.0%Fe₂O3/TiO₂分别使PE失重35.91%、20.72%和13.30%. 光催化剂加速了PE的失重，碳链的断裂和光氧化腐蚀，在薄膜表面形成大量的坑洞，降解产物中的小分子量的石蜡含量明显增高. Fe³⁺掺杂有一个最佳量， 0.5%Fe₂O3/TiO₂光催化降解PE的活性最高.     

Y2O3/纳米碳管复合粒子的结构及其对高氯酸铵热分解性能的研究

采用溶胶-凝胶法制备了Y₂O₃/纳米碳管复合粒子, 并用SEM, XPS, FT-IR和XRD对Y₂O₃/纳米碳管复合粒子的形貌和微观结构进行了表征. 结果表明, 纳米碳管有效承载了Y₂O₃, Y₂O₃连续均匀地负载在纳米碳管的表面, 负载量为19.53%. FT-IR 和XPS证明了Y₂O₃粒子和纳米碳管表面之间发生了化学键合. 用三种方法将相同比例的Y₂O₃/纳米碳管复合粒子与高氯酸胺(AP)进行混合, 采用差热分析(DTA)研究了三种混合样品中Y₂O₃/纳米碳管复合粒子对高氯酸铵热分解的催化性能. 结果表明, 三种混合样品中的Y₂O₃/纳米碳管复合粒子都能催化高氯酸铵的热分解, 其中通过水溶剂混合的样品中Y₂O₃/纳米碳管复合粒子的催化效果优于另外两种. 与纯高氯酸铵相比, 其样品中高氯酸铵的高温分解峰温降低了168.5 ℃, 表观分解热由371 J•g^－1提高到1410 J•g^－1. 并用不同样品中高氯酸铵热分解动力学参数对所得结果进行了理论分析.     

Y2O3/纳米碳管复合粒子的结构及其对高氯酸铵热分解性能的研究

采用溶胶-凝胶法制备了Y₂O₃/纳米碳管复合粒子, 并用SEM, XPS, FT-IR和XRD对Y₂O₃/纳米碳管复合粒子的形貌和微观结构进行了表征. 结果表明, 纳米碳管有效承载了Y₂O₃, Y₂O₃连续均匀地负载在纳米碳管的表面, 负载量为19.53%. FT-IR 和XPS证明了Y₂O₃粒子和纳米碳管表面之间发生了化学键合. 用三种方法将相同比例的Y₂O₃/纳米碳管复合粒子与高氯酸胺(AP)进行混合, 采用差热分析(DTA)研究了三种混合样品中Y₂O₃/纳米碳管复合粒子对高氯酸铵热分解的催化性能. 结果表明, 三种混合样品中的Y₂O₃/纳米碳管复合粒子都能催化高氯酸铵的热分解, 其中通过水溶剂混合的样品中Y₂O₃/纳米碳管复合粒子的催化效果优于另外两种. 与纯高氯酸铵相比, 其样品中高氯酸铵的高温分解峰温降低了168.5 ℃, 表观分解热由371 J•g^－1提高到1410 J•g^－1. 并用不同样品中高氯酸铵热分解动力学参数对所得结果进行了理论分析.     

Fe3O4/Au复合微粒制备条件及性质研究

在纳米级Fe₃O₄作为种子, 过量的盐酸羟胺为还原剂的条件下, 将Au³⁺在分散于水相中的Fe₃O₄胶态种子表面还原为Au⁰, 得到核壳结构, 粒径为170 nm左右的Fe₃O₄/Au磁性复合微粒, 并对磁性复合微粒的制备条件进行了优化. 通过激光粒度散射仪和透射电子显微镜分析了不同条件下磁性复合微粒的粒径分布及形貌, 结果表明: Fe₃O₄种子的磁响应性、悬浮稳定性以及种子表面Au³⁺的还原条件等是得到单分散性、粒径均一、磁响应性和悬浮性能好的胶态Fe₃O₄/Au复合微粒的主要影响因素. 通过紫外-可见分光光度计对Fe₃O₄/Au复合微粒的扫描分析发现, 磁性复合微粒在可见光区域呈现与胶体金类似的特征吸收峰, d (0.5) =168 nm的Fe₃O₄/Au磁性复合微粒的最大吸收峰位于波长625 nm处.     

金纳米微粒与藏红T相互作用的吸收、荧光和共振Rayleigh散射光谱特征

用共振Rayleigh散射(RRS)光谱并结合吸收光谱和荧光光谱研究了金纳米微粒与藏红T(ST)的相互作用. 在pH 5左右的柠檬酸盐介质中, 柠檬酸根(H₂L)^2−自组装于带正电荷的金纳米微粒表面, 形成[(Au)_n(H₂L)_m]^x−复合物. 此时(H₂L)^2−的一个羧基氧原子向内结合于金纳米微粒表面, 另一个羧基氧原子向外形成带x个负电荷的超分子复合阴离子, 此时它再与藏红T阳离子借静电引力、疏水作用力和电荷转移作用形成新的结合产物. 这里(H₂L)^2−起了“桥”的作用. 讨论了结合产物在引起吸收光谱红移, 金纳米微粒等离子体吸收带降低和荧光猝灭的同时, 将导致RRS的急剧增强并出现新的RRS光谱. 研究了金纳米微粒与藏红T相互作用对RRS、吸收光谱和荧光光谱的影响, 结合产物引起RRS增强的原因, 并结合量子化学方法对于反应机理进行了探讨, 认为RRS光谱不仅可对纳米微粒及其反应产物的研究提供新的信息并且也可作为表征和检测纳米微粒的一种灵敏手段.     

非晶态Ni-W/ZrO2复合镀层的制备、热处理及腐蚀行为

在镍钨合金电解液中, 通过搅拌使二氧化锆固体微粒悬浮, 电沉积制备Ni-W/ZrO2复合镀层. 研究结果表明, 二氧化锆粒子影响复合镀层的电沉积、表面形貌、结构、热处理过程和抗腐蚀性能; 与Ni-W合金的电沉积过程相比, 复合镀层中的W含量和电流效率均降低; 在400 ℃处理1 h后, 嵌入Ni-W本体中的ZrO2粒子脱落, W向镀层表面富集. 扫描电子显微镜(SEM)结果显示, 复合镀层呈现团粒状形态, 无裂纹. 差示扫描量热(DSC)分析结合X射线(XRD)衍射实验指出, Ni-W/ZrO2复合镀层为非晶态结构. 复合镀层的显微硬度较纳米晶Ni-W合金的高; 热处理后, 复合镀层的显微硬度和在3%氯化钠溶液中的抗腐蚀行为显著增强.     

磁性壳聚糖微球对牛血清白蛋白的吸附性能

在微乳液体系中, 以戊二醛为交联剂制备了磁性壳聚糖纳米粒子(Fe₂O₃-CS). 采用透射电子显微镜(TEM)、红外光谱(IR)、振动样品磁强计(VSM)等手段对纳米粒子进行表征. 结果表明, 纳米粒子的粒径在40 nm左右, 分散性良好, 具有较好的磁响应性能. 以碳二亚胺(EDC)为活化剂, 研究了Fe₂O₃-CS纳米粒子对牛血清白蛋白(BSA)分子的吸附性能, 并使用原子力显微镜(AFM)、紫外分光光度计(UV)进行表征. Fe₂O₃-CS粒子对BSA 的吸附大致符合Langmuir吸附模型, 298 K时饱和吸附量约为250 mg·g^-1, 吸附常数为0.007 L·mg^-1. 将BSA-粒子分散在不同pH的缓冲溶液中, 研究BSA-粒子复合物的稳定性. 用聚丙烯酰氨凝胶电泳(SDS-PAGE)对结果进行表征, 发现在碱性条件下BSA分子能从磁性粒子表面脱附下来.     

非晶态Ni-W／ZrO2复合镀层的制备、热处理及腐蚀行为

在镍钨合金电解液中,通过搅拌使二氧化锆固体微粒悬浮,电沉积制备Ni-W/ZrO2复合镀层.研究结果表明,二氧化锆粒子影响复合镀层的电沉积、表面形貌、结构、热处理过程和抗腐蚀性能;与Ni-W合金的电沉积过程相比,复合镀层中的W含量和电流效率均降低;在400℃处理1 h后,嵌入Ni-W本体中的ZrO2粒子脱落,W向镀层表面富集.扫描电子显微镜(SEM)结果显示,复合镀层呈现团粒状形态,无裂纹.差示扫描量热(DSC)分析结合X射线(XRD)衍射实验指出,Ni-W/ZrO2复合镀层为非晶态结构.复合镀层的显微硬度较纳米晶Ni-W合金的高;热处理后,复合镀层的显微硬度和在3%氯化钠溶液中的抗腐蚀行为显著增强.     

PbO2阳极在硫酸溶液中的析氧失活行为

采用热分解鄄电镀法制备了以Sb 掺杂SnO₂(Sb-SnO₂)为底层的Ti 基PbO₂阳极(Ti/PbO₂). 采用加速电解寿命测试、电化学阻抗谱、XRD、SEM-EDX 等技术, 研究了Ti/PbO₂阳极在硫酸溶液中的电解失效行为和机制.结果表明,在新制备的PbO₂镀层中, 由于氧空位的存在, PbO₂镀层的内应力表现为拉应力, 随着电解的进行, 阳极表面生成的活性氧原子在向基底扩散的过程中, 将Pb³⁺态氧化为Pb⁴⁺态, 逐渐占据镀层内作为自由电子施主的氧空位, 这不仅导致镀层的导电性能下降, 同时使镀层的应力逐渐由拉应力转变为压应力, 镀层性质逐渐劣化. 这一过程基本结束时,活性氧原子才大量扩散至Ti基底导致基底的钝化, 在Ti 基底和镀层界面出现显著的界面应力, 在界面应力和镀层内压应力的共同作用下, 阳极出现鼓泡、脱落, 迅速进入失活阶段.     

红钛锰矿MnTiO3纳米材料的溶胶-凝胶法制备及光谱研究

在十六烷基三甲基溴化铵(CTAB)/乙醇/水/盐酸形成的胶束溶液中, 以MnCl₂·4H₂O, 钛酸四异丙酯Ti(O-iPr)₄为原料, 用溶胶-凝胶方法, 75℃首先合成了纳米TiO₂-氧化锰(MnO₂, Mn₂O₃, Mn₃O₄)干凝胶, 然后在不同温度下对其进行热处理. 用X射线衍射(XRD)、透射电子显微镜 (TEM)和X射线光电子能谱(XPS)对纳米材料的结构和相组成进行了表征; 用紫外-可见光谱(UV-Vis)和激光拉曼光谱(LRS)对纳米材料的光谱性能进行了研究. X射线衍射(XRD)分析表明该干凝胶在900℃ 煅烧后可制得红钛锰矿MnTiO₃纳米材料. 透射电子显微镜(TEM)形貌观察, MnTiO₃粒子为球形或椭球形, 平均粒径50 nm. 与TiO₂(P-25)的光谱相比, 纳米MnTiO₃的紫外-可见光谱(UV-Vis)在300~700 nm范围有明显的吸收谱带, 其激光拉曼光谱(LRS)中亦有新的特征吸收峰(684, 610, 462, 360, 336, 263, 235 和202 cm^−1).     

Micromechanical and tribological properties of nanocrystalline coatings of iron-tungsten alloys electrodeposited from citrate-ammonia solutions

The correlation between the composition, morphology, and properties of Fe-W alloy coatings containing up to 29 at % tungsten was investigated by means of scanning electron microscopy, X-ray diffraction analysis, and the wear resistance and nanohardness measurements. The coatings were deposited from the citrate-ammonia bath at a direct current, the current densities were ranged from 10 to 100 mA/cm². It is shown that, in contrast to metallurgical iron, the Fe-W coatings are nanocrystalline (amorphous, the grain size is 3.0–4.0 nm). This structure of alloys allows us to produce the coatings with a nanohardness of ～13 GPa, which is comparable to the electrolytic chromium coatings. The study of wear resistance of thus obtained coatings reveals their oxidation in the course of dry friction; as a result, the oxygen content in the debris increases by 2–3 times, and the wear volume due to the tribooxidation exceeds that for similar hard Co-W and electrolytic chromium coatings.     

SiO2纳米粒子对溶胶凝胶涂层性能的影响

在高强钢表面制备了防护性溶胶凝胶涂层,并研究了不同浓度二氧化硅纳米粒子的加入对于涂层形貌、耐蚀性和硬度的影响。采用扫描电子显微镜(SEM)和电子能谱(EDS)观察了涂层的微观结构和成分;采用显微硬度计测试了涂层的硬度;采用电化学方法研究了二氧化硅纳米粒子的浓度对于涂层耐蚀性能的影响;采用傅里叶红外光谱研究涂层的化学结构,进而探讨了二氧化硅纳米粒子对于涂层的强化机理。结果显示涂层加入二氧化硅纳米粒子的最佳浓度为500 mg.L-1,此条件下的涂层表面均匀致密,有较高的硬度并且在3.5%NaCl溶液中体现出较好的耐蚀作用。纳米粒子在溶胶中反应形成活性羟基基团并与硅烷发生反应生成空间网状结构,从而强化涂层。     

抗坏血酸和草酸在金属氧化物微粒修饰电极上的电催化

不同金属氧化物微粒修饰于玻炭电极表面,对某些有机化合物,如抗坏血酸和草酸的氧化反应呈现一定的催化活性。在试验的37种金属氧化物微粒修饰电极中,电催化活性高的金属氧化物有CeO₂、ZrO₂、Co₂O₃、Cr₂O₃、SnO-2和α-Al₂O₃等。研究了金属氧化物性质对电催化活性影响的规律性。除循环伏安法外还以计时电位法,计时电流法以及旋转圆盘电极探讨了电催化机理。     

复合电沉积的最新研究动态

综述近年来国内外复合电沉积技术最新研究动态.重点探讨纳米复合镀层,电催化复合镀层以及光活性复合镀层等方面的研究现状和发展趋势.纳米复合镀层比一般的复合镀层具有更高的硬度,更好的耐磨性和耐蚀性;电催化复合镀层则可在纯金属电极,合金电极的基础上进一步降低电极反应的过电位.以金属氧化物,导电聚合物作为基质材料的电催化复合镀层已为现代复合电沉积技术开辟了一个新领域.     

Ecofriendly new nanocomposites coating formulation of zinc reinforced with calcium oxide nanoparticles synthesis from oyster shell

The zinc coating of mild undergoes rapid corrosion for a short period of time in harsh environments. This affects the durable life and overall performance of the zinc coatings. The electrochemical, oxidation, and wear performance, as well as the surface morphological properties of new nanocomposites coating formulations of zinc reinforced with calcium oxide nanoparticles, were studied in order to improve the corrosion and wear performance of zinc coatings. A current density of 1.5–2.0 A/cm² was used for the electrodeposition. The wear, oxidation, hardness, corrosion rate, and morphological properties were evaluated. The characterization of these composite coatings showed low wear rates and higher corrosion and oxidation resistance. At 1.5A/cm² current density, a 65.53% enhancement in the hardness values and 57.14% oxidation protection were obtained. The smaller crystallite size of the deposited sample is the main reason for the lower corrosion and wear resistance and higher hardness values obtained. It was established that waste oyster can be used for the electrodeposition of mild steel to enhance corrosion resistance and hardness values. CaOnp made from oyster shells has been shown to make mild steel more resistant to corrosion, wear, and oxidation.     

Study on corrosion resistance of electroplating zinc–nickel alloy coatings

Electrodeposited zinc–nickel alloy coatings have been widely adopted for surface treatment of automobile body steel sheet for high corrosion resistance. The corrosion behavior of the coatings has been related with the components of nickel, and the zinc–nickel alloy passive coatings have much higher corrosion resistance than that of zinc–nickel alloy coatings. In the present paper, the corrosion resistance behavior of the zinc–nickel alloy coatings obtained by new process and formulation has been studied by means of the electrochemistry test and neutral salt spray test. And it is discovered that the properties of corrosion resistance of zinc–nickel alloy passive coatings were better than that of zinc passive coatings, Cadmium passive coatings and alloys of electrodeposited cadmium–titanium. The components of corrosion productions, in terms of X‐ray diffraction (XRD), are mainly ZnO, ZnCl₂ · 4Zn(OH)₂ and small quantity of 2ZnCO₃· 3Zn(OH)₂. The component of zinc–nickel alloy coatings has been investigated with Glow Discharge Optical Emission Spectrometry (GDA‐750). And it is found that as the thickness of zinc–nickel alloy coatings increases, the component of zinc increases from beginning to end, but the peak value of nickel appears and an enrichment of nickel in the coatings comes into being. Because the electrodeposited zinc–nickel alloy coatings exhibit different alloy phases as a function of their alloy composition, in this paper, the crystal structure changing with the different component of nickel has been studied in terms of XRD. The result shows that electrodeposited zinc–nickel alloy has different phases: α‐phase, a solid solution of zinc in nickel with an equilibrium solubility of about more than 79% nickel; γ‐phase, an intermediate phase with a composition Ni₅Zn₂₁; η‐phase, a solid solution of nickel in zinc with less than 5% nickel; and δ‐phase (Ni₃Zn₂₂) appeared from η‐phase to α‐phase with increasing content of nickel. Copyright © 2009 John Wiley & Sons, Ltd.     

稀土元素与马来酸和邻菲咯啉三元固态配合物的研究

合成了13种由稀土离子(La³⁺、Pr³⁺、Nd³⁺、Sm³⁺-Yb³⁺和Y³⁺)与马来酸(C₄H₄O₄)和邻菲咯啉(Phen)形成的三元配合物。元素分析和微量水分测定确定其组成为Ln₂(C₄H₂O₄)₃(Phen)₂·4H₂O.研究了它们的紫外,红外吸收光谱,探讨了配合物的荧光性质及热稳定性。     

电沉积非晶态铁—铬合金镀层的研究

本实验通过控制镀液组成和操作条件获得了非晶态铁－铬合金镀层，实验分析了ＰＨ值，电流密度以及镀层中铬含量对所形成镀层的非晶态结构的影响，阳极极化曲线测量结果表明，与晶态层相比，非晶态度层具有较高的耐蚀性。     

Al－Mn合金镀层的组成结构及其耐蚀性

研究了在低温熔盐中（低于２００℃）电沉积Ａｌ－Ｍｎ合金镀层成分的控制,镀层化学组成与结构之间的关系以及镀层的耐蚀性能．提出影响镀层锰含量的主要因素是熔盐中锰离子的浓度．镀层含锰量在２５～４０（ｗｔ）％之间可形成非晶态结构．实验表明,Ａｌ－Ｍｎ合金镀层在０．５ｍｏｌ／ＬＨ＿２ＳＯ＿４熔液及ＮａＣｌ溶液中具有优良的耐蚀性,非晶态结构的Ａｌ－Ｍｎ合金镀层的耐蚀性更为优异．     

Electrodeposition and characterization of Zn–Sn alloy coatings from a deep eutectic solvent based on choline chloride for corrosion protection

With the aim of obtaining high corrosion resistant Zn–Sn alloy coatings from an ionic liquid, the effects of electrodeposition potential and electrolyte composition on the electrodeposition behavior, film composition, morphology and corrosion performance were investigated. Cyclic voltammograms indicate that Zn and Sn were co‐deposited at distinct reduction potentials as pure Zn and Sn elements. In addition, the phase composition analysis also showed that the obtained Zn–Sn alloy deposits (8 wt.%–45 wt.% Zn) consist of a two‐phase mechanical mixture of small aggregates of Zn and Sn metals. The Zn content of the alloy significantly increases as the electrodeposition potential and electrolyte Zn (II)/Sn (II) ratio increase. The corrosion performance study of the obtained Zn–Sn coatings showed that they have a passivation behavior and their corrosion resistance increases as the alloy‐Sn content increases. To improve their morphological properties, ethylene diamine tetraacetic acid additive was introduced into the electrolyte and greatly improved the morphology and corrosion resistance of the deposits. For the first time, it was shown that high corrosion resistance Zn–Sn coatings can be obtained from ionic liquids. Copyright © 2014 John Wiley & Sons, Ltd.