Time-resolved ultraviolet laser-induced breakdown spectroscopy for organic material analysis

Ultraviolet pulses (266 nm) delivered by a quadrupled Nd:YAG laser were used to analyze organic samples with laser-induced breakdown spectroscopy (LIBS). We present characteristics of the spectra obtained from organic samples with special attentions on the emissions of organic elements, O and N, and molecular bonds CN. The choice of these atomic or molecular species is justified on one hand, by the importance of these species to specify organic or biological materials; and on the other hand by the possible interferences with ambient air when laser ablation takes place in the atmosphere. Time-resolved LIBS was used to determine the time-evolution of line intensity emitted from these species. We demonstrate different kinetic behaviors corresponding to different origins of emitters: native atomic or molecular species directly vaporized from the sample or those generated through dissociation or recombination due to interaction between laser-induced plasma and air molecules. Our results show the ability of time-resolved UV-LIBS for detection and identification of native atomic or molecular species from an organic sample.     

Light emitting diode-based detectors Absorbance, fluorescence and spectroelectrochemical measurements in a planar flow-through cell

Light emitting diodes (LEDs) were first used for chemical analysis three decades ago. They are finally making their appearance in commercial analytical systems and dedicated detectors. LEDs are the most energy-efficient means of producing monochromatic light, and provide a concentrated small cool emitter ideal for miniature analytical devices. Although they rank behind fluorescent and halogen discharge lamps in total conversion efficiency (lm/W), new efficiency records are being set every year such that by next decade broadband (white) LED sources are not only likely in analytical instrumentation, but for general illumination. This paper begins with a review of analytical use of LEDs that has been advanced in the last decade. LED-based absorbance measurement and its use in pedagogy, titrations, in providing immunity to refractive index and turbidity effects, in field and process analysis, in capillary electrophoresis (CE), in liquid–liquid extraction systems, in film and drop-based analytical systems and with liquid core waveguides (LCWs) are discussed. LED-based fluorescence and spectroelectrochemical detection follows next. Multipurpose LED-based analytical instrumentation and special analytical applications and general applications are discussed. A listing of (mostly web-based) resources for fabricating LED-based detectors is then provided. Detector circuits and available components are considered and different modes of driving LEDs are compared. The temperature dependence of LED characteristics and strategies to ameliorate this problem are discussed.

The review and general resource material is followed with the construction details, operation and performance observed for a simple-to-fabricate multipurpose cell that allows simultaneous multiwavelength absorbance, fluorescence and spectroelectrochemical detection.     

Time-resolved fluorescence spectroscopy and imaging of proteinaceous binders used in paintings

The differentiation of proteins commonly found as binding media in paintings is presented based on spectrally resolved and time-resolved laser-induced fluorescence (LIF) and total emission spectroscopy. Proteins from eggs and animal glue were analysed with pulsed laser excitation at 248 nm (KrF excimer) and 355 nm (third harmonic of Nd:YAG) for spectrally resolved measurements, and at 337 nm (N₂) and 405 nm (N₂ pumped dye laser) for spectrally resolved lifetime measurements and fluorescence lifetime imaging (FLIM). Total emission spectra of binding media are used for the interpretation of LIF spectra. Time-resolved techniques become decisive with excitation at longer wavelengths as fluorescence lifetime permits the discrimination amongst binding media, despite minimal spectral differences; spectrally resolved measurements of fluorescence lifetime have maximum differences between the binding media examined using excitation at 337 nm, with maximum observed fluorescence at 410 nm. FLIM, which measures the average lifetime of the emissions detected, can also differentiate between media, is non-invasive and is potentially advantageous for the analysis of paintings. Figure The fluorescence of solid ox glue extracted from collagen can be visualised in this Total Fluorescence Spectrum; three different peaks from multiple fluorophores are present and allow the discrimination between collagen- and non-collagen proteinaceous binding media found in paintings     

A novel time-resolved laser fluorescence spectroscopy system for research on complexation of uranium(IV)

To date only a small number of studies have investigated the chemical speciation of complexes and the fluorescence properties of metal ions whose emitted fluorescence lifetime is in the range of only few nanoseconds. This is due to a lack of advanced methods which allow the conduction of these measurements. In the current study we set up a new time-resolved laser fluorescence spectroscopy system with which the fluorescence properties of metal ions with very short fluorescence lifetimes such as uranium(IV) and its compounds can be investigated. By studying the fluorescence properties of uranium(IV) in perchloric acid, we showed uranium(IV) to have a detection limit of 5 × 10⁻⁷ M and a fluorescence decay time of 2.74 ± 0.36 ns. We further investigated the fluorescence properties of uranium(IV) during the reaction with fluoride and applied our novel laser system to study the complexation of uranium(IV) with fluoride.Our data revealed the formation of a 1:1 complex of uranium(IV) and fluoride. The corresponding complex formation constant of uranium(IV) fluoride UF³⁺ was found to be log β⁰ = 9.43 ± 1.94. Our results demonstrate that our novel time-resolved laser fluorescence spectroscopy system can successfully conduct speciation measurements of metal ions and their compounds with very short-lived fluorescence lifetimes. Using this laser system, it is possible to analytically investigate such elements and compounds in environmentally relevant concentration ranges.     

Time-resolved polymer deformation using polarized planar array infrared spectroscopy

Polarized planar array infrared (PA-IR) spectroscopy is shown for the first time to be a powerful approach to study the mechanical deformation of polymers. A dual-beam PA-IR spectrometer was built to enable the simultaneous recording of parallel- and perpendicular-polarized spectra at the same sample spot. The technique provides orientation and structural information during and after fast irreversible deformations with a low-ms (or sub-ms) time resolution and a low data scatter. In proof-of-concept experiments, the possibilities of polarized PA-IR spectroscopy are illustrated by studying the deformation of poly(ethylene terephthalate) thin films.     

The feasibility of using fluorescence spectroscopy as a rapid, non-invasive method for evaluating sunscreen performance

We have carried out ex vivo studies to examine the feasibility of using fluorescence spectroscopy as an in vivo quantitative technique to assess sunscreen substantivity in terms of skin surface thickness and/or photoprotection. We found that the majority of sunscreens produced insufficient natural fluorescence and so we have attempted to increase the fluorescent signal by adding various fluorescing agents to the sunscreens. However, none of these substances is ideal; either they do not bind sufficiently strongly to sunscreen products, or their fluorescence is quenched by the active ingredients contained within sunscreens. The feasibility of using fluorescence spectroscopy for in vivo quantitative assessments of sunscreen substantivity therefore remains unproved and is dependent on a suitable fluorescent agent being found. Such an agent would have to be non-toxic, mix readily with sunscreens and be excited by visible wavelengths.     

Time-resolved investigations of pulse-initiated polymerization

The radiation polymerization of vinylpyrrolidone (VP) in aqueous solution was studied. For pulse radiolysis experiments, absorption and light scattering detection were used to measure the nature and concentration of reacting species. Some aspects of these detection methods in relation to the kinetic measurements in the radiation-induced polymerization reactions were discussed. The absorption spectra of intermediates were taken. The decay of the transient species follows second-order kinetics with the rate constant depending on the VP concentration. The growth of the absorbance and intensity of scattered light in the concentrated VP solution (9,4 × 10⁻¹ mol dm⁻³) occur both in the same timescale.     

Time resolved fluorescence spectroscopy

Time correlated single photon counting was used to investigate solvent dynamics of laser dyes in a polar, viscous solvent. The resolved total luminescence spectra of oxazine 4 in 2-methyltetrahydrofuran (2-MTHF) have been measured and solvent relaxation observed.     

Time-resolved luminescent lateral flow assay technology

We here report a detection technology that integrates highly sensitive time-resolved luminescence technique into lateral flow assay platform to achieve excellent detection performance with low cost. We have developed very bright, surface-functionalized and mono-dispersed phosphorescent nanoparticles of long lifetime under ambient conditions. The phosphorescent nanoparticles have been used to conjugate with monoclonal antibody for C-reactive protein (CRP), an inflammatory biomarker. Lateral flow immunoassay devices have been developed using the conjugate for highly sensitive detection of CRP. The CRP assay can achieve a detection sensitivity of <0.2 ng mL⁻¹ in serum with a linear response from 0.2 to 200 ng mL⁻¹ CRP. We have also developed a low cost time-resolved luminescence reader for the lateral flow immunoassay (LFIA) devices. The reader does not use expensive band pass filter and still provide very low detection background and high detection sensitivity on solid substrates such as nitrocellulose membranes. The reader can detect less than 2.5 ng phosphorescent particles captured on a nitrocellulose membrane strip with more than three orders of magnitude linear detection dynamic range. The technology should find a number of applications, ranging from clinical diagnostics, detection of chemical and biological warfare agents, to food and environmental monitoring.     

Time-resolved spectroscopy and imaging diagnostics of single pulse and collinear double pulse laser induced plasma from a glass sample

The characterization of laser-induced plasma from a glass sample was performed in the single- and double-pulse excitation regimes. The detailed information about density distributions of excited atoms and ions in the expanding plasma was obtained by using the imaging detection system providing measurements of the spatial, temporal, and spectral plasma emission characteristics. The expansion dynamics was shown to differ strongly between two excitation regimes. The enhancement factors of the line emissions in the double-pulse mode were found to be spatial dependent and to differ for the different elements in the plasma plume. The obtained results are useful for a better understanding of the main physical processes leading to the analytical improvement achieved by the use of double-pulse laser-induced breakdown spectroscopy (LIBS).     

Time-resolved fluorescence aptamer-based sandwich assay for thrombin detection

In the present study, the authors report a novel sensitive method for the detection of thrombin using time-resolved fluorescence sensing platform based on two different thrombin aptamers. The thrombin 15-mer aptamer as a capture probe was covalently attached to the surface of glass slide, and the thrombin 29-mer aptamer was fluorescently labeled as a detection probe. A bifunctional europium complex was used as the fluorescent label. The introduction of thrombin triggers the two different thrombin aptamers and thrombin to form a sandwich structure. The fluorescence intensity is proportional to the thrombin concentration. The present sensing system could provide both a wide linear dynamic range and a low detection limit. The proposed sensing system also presented satisfactory specificity and selectivity. Results showed that thrombin was retained at the aptamer-modified glass surface while nonspecific proteins were removed by rinsing with buffer solution. This approach successfully showed the suitability of aptamers as low molecular weight receptors on glass slides for sensitive and specific protein detection.     

Solid-phase fluorescence spectroscopy for the determination of acetylsalicylic acid in powdered pharmaceutical samples

A rapid, simple and rugged procedure without requiring any prior sample treatment was developed for the determination of acetylsalicylic acid (ASA) in tablets formulations by solid-phase fluorescence spectroscopy. The method was carried out on powdered samples, consisting of an active substance dispersed in lactose, maize starch, talc and magnesium stearate. Previous knowledge of the sample bulk composition is needed for proper application of the method. Wavelengths for maximum excitation and emission were 288 and 318 nm, respectively, and the fluorescence intensity was linear with ASA concentration within the 50-170 mg g⁻¹ range. Detection and quantification limits were 2.2 and 7.3 mg g⁻¹, and the analytical frequency was 200 h⁻¹. For a typical sample, the relative standard deviation of results was estimated as 2.3% (n = 10). Accuracy was assessed by comparing the analytical results obtained with the proposed method with those related to a reference method recommended by British Pharmacopoeia: no differences between the methods were found at the 95% confidence level.     

Applicability of quinolizino-coumarins for monitoring free radical photopolymerization by fluorescence spectroscopy

Applicability of commercially available 2,3,5,6-1H,4H-tetrahydro-quinolizino[9,9a,1-gh]coumarin (Coumarin 6H) and its 9-methyl (Coumarin 102), 9-trifluoromethyl (Coumarin 153) and 10-carboxy (Coumarin 343) derivatives as fluorescent molecular probes for monitoring progress of free radical photopolymerization of several acrylic and methacrylic monomers by Fluorescence Probe Technique (FPT) has been tested. The progress of the photopolymerization was monitored using a specially designed cure monitoring system. It was found that all the quinolizino-coumarins shifted their fluorescence spectra towards shorter wavelengths with progress of polymerization, which enabled monitoring the progress in terms of fluorescence intensity ratios as the progress indicator. Coumarin 6H turned out to be the most sensitive to changes occurring during polymerization. Coumarin 102 and Coumarin 153 exhibit only about 20% lower sensitivity than that of Coumarin 6H, so those are also good enough for the cure monitoring of acrylic monomers, except for tetraethylene glycol diacrylate, where the quinolizino-coumarins response was disturbed by some fluorescent side product. Moreover, it has been found that the FPT technique has some limitations in the case of monofunctional monomers.     

Excitation emission and time-resolved fluorescence spectroscopy of selected varnishes used in historical musical instruments

The analysis of various varnishes from different origins, which are commonly found on historical musical instruments was carried out for the first time with both fluorescence excitation emission spectroscopy and laser-induced time-resolved fluorescence spectroscopy. Samples studied include varnishes prepared using shellac, and selected diterpenoid and triterpenoid resins from plants, and mixtures of these materials. Fluorescence excitation emission spectra have been collected from films of naturally aged varnishes. In parallel, time-resolved fluorescence spectroscopy of varnishes provides means for discriminating between short- (less than 2.0 ns) and long-lived (greater than 7.5 ns) fluorescence emissions in each of these complex materials. Results suggest that complementary use of the two non destructive techniques allows a better understanding of the main fluorophores responsible for the emission in shellac, and further provides means for distinguishing the main classes of other varnishes based on differences in fluorescence lifetime behaviour. Spectrofluorimetric data and time resolved spectra presented here may form the basis for the interpretation of results from future in situ fluorescence examination and time resolved fluorescence imaging of varnished musical instruments.     

Time-resolved fluorescence based DNA detection using novel europium ternary complex doped silica nanoparticles

A two-probe tandem DNA hybridization assay including capture DNA₁, probe DNA₂, and target DNA₃ was prepared. The long-lived luminescent europium complex doped nanoparticles (NPs) were used as the biomarker. The complex included in the particle was Eu(TTA)₃(5-NH₂-phen)-IgG (ETN-IgG), the europium complex Eu(TTA)₃(5-NH₂-phen) linking an IgG molecule. Silica NPs containing ETN-IgG were prepared by the reverse microemulsion method, and were easy to label oligonucleotide for time-resolved fluorescence assays. The luminophores were well-protected from the environmental interference when they were doped inside the silica network. The sequences of Staphylococcus aureus and Escherichia coli genes were designed using software Primer Premier 5.0. Amino-modified capture DNA₁ was covalently immobilized on the common glass slides surface. The detection was done by monitoring the fluorescence intensity from the glass surface after the hybridization reaction with the NPs labeled probe DNA₂ and complementary target DNA₃. The sensing system presented short hybridization time, satisfactory stability, sensitivity, and selectivity. This approach was successfully employed for preliminary application in the detection of pure cultured E. coli, it might be an effective tool for pathogen DNA monitoring.     

Binding of hairpin polyamides to DNA studied by fluorescence correlation spectroscopy for DNA nanoarchitectures

We have recently constructed a “DNA strut” consisting of two DNA-binding hairpin polyamides of Dervan-type connected via a long flexible linker and were able to show that this strut can be used to sequence-selectively connect DNA helices. This approach provides a second structural element (besides the Watson–Crick base pairing) for the assembly of higher-order DNA nanoarchitectures from smaller DNA building blocks. Since none of the existing analytical techniques for studying this kind of system were found suitable for detection and quantification of the formation of the resulting complexes, we chose fluorescence correlation spectroscopy (FCS). In the present study we show that FCS allowed us in a versatile and fast way to investigate the binding of Dervan polyamides to DNA. In particular it also shows its power in the quantitative detection of the formation of multimeric complexes and the in investigation of binding under nonphysiological conditions. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Time-resolved ESI-MS Investigation on Reduction and Alkylation in Unfolding Process of Lysozyme

The kinetic procedure of the unfolding of lysozyme induced by the reduction of disulfide was monitored by the time-resolved ESI-MS with a sheath liquid assistant electrospray interface. It was found that the reduction process for the eight disulfides had a less difference in the reaction time after denatured treatment. In addition, the alkylation of the reduced free thiols was much slower than the reduction procedure. An artifact peak produced by the CID fragmentation in the mass spectra was identified and the possible mechanism of the Hofmann elimination reaction was proposed.     

Asymmetric rotor-like probes to polarized fluorescence study of the macroscopically oriented uniaxial media: Model parameters recognition

In this paper the possibility of the numerical data modelling in the case of angle- and time-resolved fluorescence spectroscopy is investigated. The asymmetric fluorescence probes are assumed to undergo the restricted rotational diffusion in a hosting medium. This process is described quantitatively by the diffusion tensor and the aligning potential. The evolution of the system is expressed in terms of the Smoluchowski equation with an appropriate time-developing operator. A matrix representation of this operator is calculated, then symmetrized and diagonalized. The resulting propagator is used to generate the synthetic noisy data set that imitates results of experimental measurements. The data set serves as a groundwork to the χ² optimization, performed by the genetic algorithm followed by the gradient search, in order to recover model parameters, which are diagonal elements of the diffusion tensor, aligning potential expansion coefficients and directions of the electronic dipole moments. This whole procedure properly identifies model parameters, showing that the outlined formalism should be taken in the account in the case of analysing real experimental data.     

荧光光谱法研究4-硝基苯胺与牛血清白蛋白的相互作用

在模拟动物生理条件下利用荧光光谱法从分子水平上研究了4-硝基苯胺同牛血清白蛋白(BSA)的相互作用.4-硝基苯胺对BSA的荧光有较强猝灭作用.用Stern-Volmer方程和双对数方程分别处理实验数据发现BSA与4-硝基苯胺发生反应生成了新的复合物,猝灭机理以静态碎灭为主.根据双对数方程求出了不同温度下反应时复合物的形...     

DNA microelectrophoresis using double focus fluorescence correlation spectroscopy

Double focus fluorescence correlation spectroscopy (dfFCS) was used to determine electrophoretic mobilities of short double-stranded DNA (dsDNA)-fragments (75 base pairs (bp) -1019 bp) in microfluidic channels. The electrokinetic flow profile across a microchannel was measured with 1 microm spatial resolution and separated in electroosmotic and electrophoretic contributions. Experiments show that the free solution mobility is independent of DNA length. The diffusion constant is additionally determined by FCS and follows a length dependent rod-diffusion model. We interpret the electrophoretic mobilities using a modified Nernst Einstein relation, which additionally takes Manning condensation and counterion induced hydrodynamic retardation forces into account. In 3% w/v polyethylene oxide (PEO)-network (M(r) 3 .10(5) Dalton) the electrophoretic velocities become size-dependent with a power-law exponent be-tween 0.28 and 0.31. Mixtures of dsDNA-fragments exhibit distinguishable peaks in the dfFCS cross-correlation function. The potential of dfFCS for realtime micro-analysis in terms of speed and spatial resolution is discussed.