两类线性双层规划的算法

根据值型线性双层规划的 Johri一般对偶的对偶性质 ,把对两类值型线性双层规划的求解问题转化为对有限个线性规划的求解问题 ,简化了双层规划的求解过程 ,给出了求解这两类值型线性双层规划的一种有效算法     

一种非增值型凸二次双层规划的有效算法

主要研究了非增值型凸二次双层规划的一种有效求解算法。首先利用数学规划的对偶理论,将所求双层规划转化为一个下层只有一个无约束凸二次子规划的双层规划问题.然后根据两个双层规划的最优解和最优目标值之间的关系,提出一种简单有效的算法来解决非增值型凸二次双层规划问题.并通过数值算例的计算结果说明了该算法的可行性和有效性。     

双层线性分式规划求顶点的算法

基于双层线性分式规划的性质,讨论了上层不带约束的双层线性分式规划模型,给出了求其所有顶点的算法.此算法为进一步进行双层线性分式规划的灵敏度分析打下了坚实的基础,通过例子对算法进行了检验,并利用结果进行了灵敏度分析.     

基于凹性割的线性双层规划全局优化算法

通过对线性双层规划下层问题对偶间隙的讨论,定义了一种凹性割,利用该凹性割的性质,给出了一个求解线性双层规划的割平面算法。由于线性双层规划全局最优解可在其约束域的极点上达到,提出的算法能求得问题的全局最优解,并通过一个算例说明了算法的有效性。     

求解弱线性双层规划问题的一种全局优化方法

双层规划在经济、交通、生态、工程等领域有着广泛而重要的应用.目前对双层规划的研究主要是基于强双层规划和弱双层规划.然而,针对弱双层规划的求解方法却鲜有研究.研究求解弱线性双层规划问题的一种全局优化方法,首先给出弱线性双层规划问题与其松弛问题在最优解上的关系,然后利用线性规划的对偶理论和罚函数方法,讨论该松弛问题和它的罚问题之间的关系.进一步设计了一种求解弱线性双层规划问题的全局优化方法,该方法的优势在于它仅仅需要求解若干个线性规划问题就可以获得原问题的全局最优解.最后,用一个简单算例说明了所提出的方法是可行的.     

带关联的双层多目标决策研究

本文研究是线性的双层多目标决策.根据线性规划的对偶理论证明了双层多目标决策的可行集的连通性;利用s*-最优均衡解的概念,求得双层多目标规划的偏好满意解;最后,我们得到了满意解的有效性,并在极点得到.     

双层规划问题的一种模式搜索Filter方法

双层规划在工程设计和经济管理中应用广泛,结合模式搜索方法和Filter方法提出了一种解决双层规划问题的算法—模式搜索Filter方法.算法以Filter法思想构造接受准则,以模式搜索提供迭代方向和步长,能够有效的解决一类双层规划问题.     

求解特定线性互补问题的牛顿KKT内点法

利用线性互补问题与二次规划之间的关系,推广了求解二次规划的KKT内点法,并用于线性互补问题,分析了推广算法的全局收敛性和局部收敛性.数值实验表明,算法对求解几类线性互补问题是有效的.     

基于全牛顿步长求解凸二次规划问题的不可行内点算法

借助于全牛顿步长对凸二次规划问题提出了一种新的不可行内点算法.算法主要迭代由可行迭代步和中心路径邻域迭代步组成.其优点是线性搜寻方向是不需要的.最后证明算法迭代复杂性为O(nlogn/ε),与目前最好的不可行内点算法复杂性一致.     

二次半定规划的增广拉格朗日算法

基于变换X=VV~T,本文将半定规划问题转换为非线性规划问题,提出了解决此问题的增广拉格朗日算法,并证明了算法的线性收敛性.在此算法中,每一次迭代计算的子问题利用最速下降搜索方向和满足wolf条件的线性搜索法求最优解.数值实验表明,此算法是行之有效的,且优于内点算法.     

关于二层规划最优解新定义的几点注解

文献[2]提出了二层规划解的新定义,同时指出新定义能够解决更广泛的线性二层规划问题,并且如果线性二层规划的约束域为非空紧集,那么线性二层规划问题就存在Pareto最优解.本文用两个线性二层规划的例子说明文献[2]得出的结论是不可靠的,同时还分析了两种定义下的线性二层规划诱导域之间的关系.     

New Branch-and-Cut Algorithm for Bilevel Linear Programming

Linear mixed 0–1 integer programming problems may be reformulated as equivalent continuous bilevel linear programming (BLP) problems. We exploit these equivalences to transpose the concept of mixed 0–1 Gomory cuts to BLP. The first phase of our new algorithm generates Gomory-like cuts. The second phase consists of a branch-and-bound procedure to ensure finite termination with a global optimal solution. Different features of the algorithm, in particular, the cut selection and branching criteria are studied in details. We propose also a set of algorithmic tests and procedures to improve the method. Finally, we illustrate the performance through numerical experiments. Our algorithm outperforms pure branch-and-bound when tested on a series of randomly generated problems. Work of the authors was partially supported by FCAR, MITACS and NSERC grants.     

Disjunctive cuts for continuous linear bilevel programming

This work shows how disjunctive cuts can be generated for a bilevel linear programming problem (BLP) with continuous variables. First, a brief summary on disjunctive programming and bilevel programming is presented. Then duality theory is used to reformulate BLP as a disjunctive program and, from there, disjunctive programming results are applied to derive valid cuts. These cuts tighten the domain of the linear relaxation of BLP. An example is given to illustrate this idea, and a discussion follows on how these cuts may be incorporated in an algorithm for solving BLP.     

A modified method for constructing efficient solutions structure of MOLP

This paper deals with a recently proposed algorithm for obtaining all weak efficient and efficient solutions in a multi objective linear programming (MOLP) problem. The algorithm is based on solving some weighted sum problems, and presents an easy and clear solution structure. We first present an example to show that the algorithm may fail when at least one of these weighted sum problems has not a finite optimal solution. Then, the algorithm is modified to overcome this problem. The modified algorithm determines whether an efficient solution exists for a given MOLP and generates the solution set correctly (if exists) without any change in the complexity.     

A primal projective interior point method for linear programming

We present a new projective interior point method for linear programming with unknown optimal value. This algorithm requires only that an interior feasible point be provided. It generates a strictly decreasing sequence of objective values and within polynomial time, either determines an optimal solution, or proves that the problem is unbounded. We also analyze the asymptotic convergence rate of our method and discuss its relationship to other polynomial time projective interior point methods and the affine scaling method.This research was supported in part by NSF Grants DMS-85-12277 and CDR-84-21402 and ONR Contract N00014-87-K0214.     

Constructing efficient solutions structure of multiobjective linear programming

It is not a difficult task to find a weak Pareto or Pareto solution in a multiobjective linear programming (MOLP) problem. The difficulty lies in finding all these solutions and representing their structure. This paper develops an algorithm for solving this problem. We investigate the solutions and their relationships in the objective space. The algorithm determines finite number of weights, each of which corresponds to a weighted sum problems. By solving these problems, we further obtain all weak Pareto and Pareto solutions of the MOLP and their structure in the constraint space. The algorithm avoids the degeneration problem, which is a major hurdle of previous works, and presents an easy and clear solution structure.     

Solving Bilevel Linear Programs Using Multiple Objective Linear Programming

We present an algorithm for solving bilevel linear programs that uses simplex pivots on an expanded tableau. The algorithm uses the relationship between multiple objective linear programs and bilevel linear programs along with results for minimizing a linear objective over the efficient set for a multiple objective problem. Results in multiple objective programming needed are presented. We report computational experience demonstrating that this approach is more effective than a standard branch-and-bound algorithm when the number of leader variables is small.     

Deepest point of a polyhedron and linear programming

Abstract

The problem of finding a deepest point (a ball centre) of a polyhedron is studied. A finite combinatorial interior point method is presented for this problem which yields an algorithm for linear programming. We conjecture that this is a strongly polynomial algorithm. Meanwhile developing the algorithm, several auxiliary results were found; among others, Gorokh and Werner’s algorithm for linear inequalities is slightly extended. Our numerical experiments with the problem detected bugs in a linear interior point solver used in MATLAB 6 Optimization Toolbox.     

一个求解线性不等式约束的非线性规划的广义梯度投影内点 …

基于内点算法思想,利用广义投影技术设计了求解带线性不等式约束和非负约束的非线性规划的广义梯度投影内点算法,并了算法的收敛性质,数值例子表明算法是有效的。     

Determining maximal efficient faces in multiobjective linear programming problem

Finding an efficient or weakly efficient solution in a multiobjective linear programming (MOLP) problem is not a difficult task. The difficulty lies in finding all these solutions and representing their structures. Since there are many convenient approaches that obtain all of the (weakly) efficient extreme points and (weakly) efficient extreme rays in an MOLP, this paper develops an algorithm which effectively finds all of the (weakly) efficient maximal faces in an MOLP using all of the (weakly) efficient extreme points and extreme rays. The proposed algorithm avoids the degeneration problem, which is the major problem of the most of previous algorithms and gives an explicit structure for maximal efficient (weak efficient) faces. Consequently, it gives a convenient representation of efficient (weak efficient) set using maximal efficient (weak efficient) faces. The proposed algorithm is based on two facts. Firstly, the efficiency and weak efficiency property of a face is determined using a relative interior point of it. Secondly, the relative interior point is achieved using some affine independent points. Indeed, the affine independent property enable us to obtain an efficient relative interior point rapidly.