Fluorometry of hydrogen peroxide using oxidative decomposition of folic acid

Hydrogen peroxide (H₂O₂) is one of the most important reactive oxygen species. In the present study, a fluorometry method for detecting H₂O₂ utilizing folic acid was evaluated. Folic acid was decomposed by H₂O₂ in the presence of Cu(II) into pterine-6-carboxylic acid, leading to strong fluorescence enhancement. In the absence of the metal ion, superoxide and H₂O₂ could not decompose folic acid. Also, H₂O₂ plus sodium hypochlorite (a source of singlet oxygen) could not induce fluorescence enhancement. These results demonstrate that H₂O₂ can be selectively detected using folic acid plus Cu(II). The limit of detection (LOD; at S/N=3) for H₂O₂ is 0.5 μM. This method based on the fluorescence enhancement of folic acid was applied in order to determine small amounts of H₂O₂ generated through the autooxidation of semicarbazide (generation rate: ∼0.01 μM min⁻¹), a carcinogenic compound.      

Fluorescence detection techniques for protein kinase assay

Traditional methods for protein kinase (PK) assay are mainly based on use of ³²P-labeled adenosine triphosphate (ATP); applications of such methods are, however, hampered by radioactive waste and short half-life of ³²P-labeled ATP. Therefore non-radioactive methods, such as fluorescence detection techniques are good alternative. In this review, we describe the principles of four fluorescence techniques (fluorescence intensity endpoint measurement, fluorescence resonance energy transfer (FRET), fluorescence polarization (FP), and fluorescence lifetime imaging) and provide an overview of applications of these fluorescence detection techniques in protein kinase assay, underlining their relative advantages and limitations. Research trends in this field are also highlighted. Figure Schematic representation of kinase assay based on direct fluorescence polarization measurements. The fluorescent peptide, on phosphorylation by kinase, binds to a phosphospecific antibody, which leads to a high FP value     

Four-way calibration applied to the simultaneous determination of folic acid and methotrexate in urine samples

First-, second- and third-order calibration methods were investigated for the simultaneous determination of folic acid and methotrexate. The interest in the determination of these compounds is related to the fact that methotrexate inhibits the body’s absorption of folic acid and prolonged treatment with methotrexate may lead to folic acid deficiency, and to the use of folic acid to cope with toxic side effects of methotrexate. Both analytes were converted into highly fluorescent compounds by oxidation with potassium permanganate, and the kinetics of the reaction was continuously monitored by recording the kinetics curves of fluorescence emission, the evolution with time of the emission spectra and the excitation–emission matrices (EEMs) of the samples at different reaction times. Direct determination of mixtures of both drugs in urine was accomplished on the basis of the evolution of the kinetics of EEMs by fluorescence measurements and four-way parallel-factor analysis (PARAFAC) or multiway partial least squares (N-PLS) chemometric calibration. The core consistency diagnostic (CORCONDIA) was employed to determine the correct number of factors in PARAFAC and the procedure converged to a choice of three factors, attributed to folic acid, methotrexate and to the sum of fluorescent species present in the urine.      

Leek-derived codoped carbon dots as efficient fluorescent probes for dichlorvos sensitive detection and cell multicolor imaging

A biomass nitrogen and sulfur codoped carbon dots (NS-Cdots) was prepared by a simple and clean hydrothermal method using leek, and was employed as efficient fluorescent probes for sensitive detection of organophosphorus pesticides (OPs). The leek-derived NS-Cdots emitted blue fluorescence, but was quenched by H₂O₂. Due to acetylcholinesterase/choline oxidase–based cascade enzymatic reaction that produces H₂O₂ and the inhibition effect of OPs on acetylcholinesterase activity, a NS-Cdots-based fluorescence “off-on” method to detect OPs-dichlorvos (DDVP) was developed. More sensitivity and wider linear detection range were achieved from 1.0 × 10⁻⁹ to 1.0 × 10⁻³ M (limit of detection = 5.0 × 10⁻¹⁰ M). This developed method was applied to the detection of DDVP in Chinese cabbage successfully. The average recoveries were in the range of 96.0~104.0% with a relative standard deviation of less than 3.3%. In addition, the NS-Cdots fluorescent probes were also employed successfully in multicolor imaging of living cells, manifesting that the NS-Cdots fluorescent probes have great application potential in agricultural and biomedical fields.

Graphical Abstract

     

New noncellular fluorescence microplate screening assay for scavenging activity against singlet oxygen

In the present study, a new fluorescence microplate screening assay for evaluating scavenging activity against singlet oxygen (¹O₂) was implemented. The chemical generation of ¹O₂ was promoted using the thermodissociable endoperoxide of disodium 3,3′-(1,4-naphthalene)bispropionate (NDPO₂). The detection of ¹O₂ was achieved using dihydrorhodamine 123 (DHR), a nonfluorescent molecule that is oxidizable to the fluorescent form rhodamine 123 (RH). The combined use of a ¹O₂-selective generator and a highly sensitive probe (DHR) was then successfully applied to perform a screening assay of the ¹O₂ scavenging activities of ascorbic acid, penicillamine, cysteine, N-acetylcysteine (NAC), methionine, reduced glutathione (GSH), dihydrolipoic acid, lipoic acid, and sodium azide. All of these antioxidants exhibited concentration-dependent ¹O₂ scavenging capacities. They could be ranked according to observed activity: ascorbic acid> cysteine> penicillamine> dihydrolipoic acid > GSH> NAC> sodium azide> lipoic acid (IC₅₀ values of 3.0 ± 0.2, 8.0 ± 0.7, 10.9 ± 0.8, 25.2 ± 4.5, 57.4 ± 5.9, 138 ± 13, 1124 ± 128, 2775 ± 359 μM, mean±SEM, respectively) > methionine (35% of scavenging effect at 10 mM). In conclusion, the use of NDPO₂ as a selective generator for ¹O₂ and its fluorescence detection by the highly sensitive probe DHR is shown to be a reliable and resourceful analytical alternative means to implement a microplate screening assay for scavenging activity against ¹O₂. Generation and detection of singlet oxygen     

Enhanced resonance light scattering properties of gold nanoparticles due to cooperative binding

The interaction of 11-mercaptoundecanoic acid capped gold nanoparticles (MUA-GNPs) with europium ions and aminoacids has been studied by UV-Vis spectrophotometry, fluorescence, confocal fluorescence microscopy, resonance light scattering and TEM. Results demonstrated that hyper-Rayleigh scattering emission occurs upon the addition of lysine to the MUA-GNPs–Eu(III) system, thus providing an inherently sensitive method for lysine determination. The effects of geometrical factors of the gold nanoparticles (aspect ratio, particle size, cluster formation) and the surrounding medium (pH) on this behavior are discussed. The cooperative binding interactions of Eu³⁺ and lysine with gold nanoparticles permitted the discrimination of lysine from other amino acids. The probable mechanism for the spectral changes and the enhanced resonance light scattering observed is outlined. Figure Gold nanoparticle resonance light scattering plasmon enhancement through cooperative binding with europium and lysine     

Molecular iodine selective membrane for iodate determination in salt samples: chemical amplification and preconcentration

A molecular iodine selective membrane has been used for preconcentration of I₂ generated in situ by iodometric reaction of with excess I⁻ in acidic medium (pH 1–2). This iodometric reaction amplifies the iodine content six times resulting in enhancement of analytical response ranging from three times for molecular methods to six times for elemental methods. The chemical conditions of this iodometric reaction were optimized for quantitative generation and subsequent sorption of I₂ in the membrane samples (96 ± 3%). The homogeneous transparent membrane was prepared by immobilizing I₂-complexing polyvinylpyrrolidone (PVP) in the plasticized cellulose triacetate matrix. Four different analytical methods were examined for quantitative determination of in iodized salt samples by preconcentrating it as I₂ in the membrane matrix. These methods were: (1) spectrophotometry of the PVP-I₂ complex formed in the membrane matrix, (2) a radiotracer method using I⁻ tagged with ¹³¹I radiotracer, (3) instrumental neutron activation analysis (INAA), and (4) energy-dispersive X-ray fluorescence (EDXRF) analysis. The contents thus determined in the iodized salt samples by the membrane-based radiotracer method were compared with the total iodine determined in salt samples by epithermal instrumental neutron activation analysis (EINAA). The membrane-based method for iodate determination in salt samples has advantages over conventional analytical methods, for example preconcentration and chemical amplification, and is free from interference from anions. Figure A molecular iodine selective membrane was used for the quantitative preconcentration of I₂ generated in situ by iodometric reaction of with excess I^aˆ’ in acidic medium, which amplifies iodine content six times     

The 3D porous metal-organic framework constructed by Cd(II) with 2-methylimidazole-4,5-dicarboxylic acid

Abstract  A 3D metal-organic framework, [C₆H₃CdN₂O₄]·NH₄, was synthesized solvothermally and structurally characterized by single-crystal X-ray structure determination. This compound crystallizes in the tetragonal system with the space group P42/nmc. The crystal structure presents a 3D framework and open channels, exhibiting guest-coordination sites at channel walls and strong fluorescent emission. Graphical abstract        

Violet and greenish photoprotein obelin mutants for reporter applications in dual-color assay

Two kinds of Ca²⁺-regulated photoprotein obelin with altered color of bioluminescence were obtained by active-center amino acid substitution. The mutant W92F-H22E emits violet light (λ_max = 390 nm) and the mutant Y139F emits greenish light (λ _max = 498 nm), with small spectral overlap, both display high activity and stability and thus may be used as reporters. For demonstration, the mutants were applied in dual-color simultaneous immunoassay of two gonadotropic hormones—follicle-stimulating hormone and luteinizing hormone. Bioluminescence of the reporters was simultaneously triggered by single injection of Ca²⁺ solution, divided using band-pass optical filters and measured with a two-channel photometer. The sensitivity of simultaneous bioluminescence assay was close to that of a separate radioimmunoassay. Figure Two kinds of Ca²⁺-regulated photoprotein obelin with altered color of bioluminescence were obtained and applied in dual-color simultaneous immunoassay of two gonadotropic hormones.     

Multiple-scattering extended X-ray absorption fine structure analysis of nanostructured iron(III) oxide in the pore system of mesoporous carbon CMK-1

This work is devoted to the EXAFS analysis of nanostructured iron(III) oxide synthesized inside the pore system of mesoporous carbon CMK-1. A detailed study of the recording, preparation and evaluation of data recorded in fluorescence mode at the iron K-edge with and without multiple scattering is shown. The results obtained show that the local structure of Fe³⁺ inside nanostructured iron(III) oxide is different to that of the bulk material. Due to the small particle size, data analysis is much more difficult and data preparation more complex. Incorporating multiple scattering paths in the Fourier transforms and back-transforms during data evaluation gives structural insights that cannot be obtained using other spectroscopic methods, and this technique was used to draw conclusions about the first four coordination spheres of the nanostructured iron(III) oxide.      

Photo-induced cold vapor generation with low molecular weight alcohol, aldehyde, or carboxylic acid for atomic fluorescence spectrometric determination of mercury

With UV irradiation, Hg²⁺ in aqueous solution can be converted into Hg⁰ cold vapor by low molecular weight alcohols, aldehydes, or carboxylic acids, e.g., methanol, formaldehyde, acetaldehyde, glycol, 1,2-propanediol, glycerol, acetic acid, oxalic acid, or malonic acid. It was found that the presence of nano-TiO₂ more or less improved the efficiency of the photo-induced chemical/cold vapor generation (photo-CVG) with most of the organic reductants. The nano-TiO₂-enhanced photo-CVG systems can be coupled to various analytical atomic spectrometric techniques for the determination of ultratrace mercury. In this work, we evaluated the application of this method to the atomic fluorescence spectrometric (AFS) determination of mercury in cold vapor mode. Under the optimized experimental conditions, the instrumental limits of detection (based on three times the standard deviation of 11 measurements of a blank solution) were around 0.02–0.04 μg L⁻¹, with linear dynamic ranges up to 15 μg L⁻¹. The interference of transition metals and the mechanism of the photo-CVG are briefly discussed. Real sample analysis using the photo-CVG-AFS method revealed that it was promising for water and geological analysis of ultralow levels of mercury. Image of the photo-CVG instrumentation showing the photoreactor inside the water cooling unit     

Fluorescence-based immunoassay for human chorionic gonadotropin based on polyfluorene-coated silica nanoparticles and polyaniline-coated Fe3O4 nanoparticles

We report on an ultrasensitive fluorescence immunoassay for human chorionic gonadotrophin antigen (hCG). It is based on the use of silica nanoparticles coated with a copolymer (prepared from a fluorene, a phenylenediamine, and divinylbenzene; PF@SiO₂) that acts as a fluorescent label for the secondary monoclonal antibody to β-hCG antigen. In parallel, Fe₃O₄ nanoparticles were coated with polyaniline, and these magnetic particles (Fe₃O₄@PANI) served as a solid support for the primary monoclonal antibody to β-hCG antigen. The PF@SiO₂ exhibited strong fluorescence and good dispersibility in water. A fluorescence sandwich immunoassay was developed that enables hCG concentrations to be determined in the 0.01–100 ng·mL⁻¹ concentration range, with a detection limit of 3 pg·mL⁻¹.

Fluorescence detection of prepared immune reagent nano-composites using the fluorescence cell

     

Quasi in situ XPS investigations on intercalation mechanisms in Li-ion battery materials

New concepts for Li-ion batteries are of growing interest for high-performance applications. One aim is the search for new electrode materials with superior properties and their detailed characterization. We demonstrate the application of X-ray photoelectron spectroscopy (XPS) to investigate electrode materials (LiCoO₂, LiCrMnO₄) during electrochemical cycling. The optimization of a “quasi in situ” analysis, by transferring the samples with a transport chamber from the glove box to the XPS chamber, and the reliability of the experiments performed are shown. The behavior of characteristic chemical species at the electrodes and the changes in oxidation states of LiCrMnO₄ during cycling is discussed. The formation of Cr⁶⁺ is suspected as a possible reason for irreversible capacity loss during charging up to complete Li deintercalation (approximately 5.2 V). Figure Scheme of a quasi in situ XPS experiment on Li-ion battery electrode material     

Determination of the activity of hydrogen peroxide scavenging by using blue-emitting glucose oxidase–stabilized gold nanoclusters as fluorescent nanoprobes and a Fenton reaction that induces fluorescence quenching

The authors describe a rapid and sensitive method for the determination of the activity of scavenging hydrogen peroxide in which glucose oxidase–stabilized gold nanoclusters (AuNCs) were employed as a fluorescent nanoprobe. The AuNCs are synthesized by a biomineralization process and display an intense blue fluorescence peaking at 450 nm and a quantum yield of 1.1% under 360–nm excitation. The Fenton reaction induces quenching of fluorescence, and this effect can be used to determine H₂O₂ in the 0.5 to 10 μmol?L^?1 concentration range. The substances displaying H₂O₂ scavenging activity prevent quenching and thus restore fluorescence. The intensity of restored fluorescence is directly related to the H₂O₂ scavenging activity of the antioxidant. The method was applied to the determination of the H₂O₂ scavenging activity of the model antioxidants ascorbic acid and tartaric acid which gave IC₅₀ values of 7.4 and 19.1 μmol?L^?1, respectively.

Open image in new window

Graphical abstract Blue-emitting gold nanoclusters (AuNCs) were prepared by using GOx as both the reducing and stabilizing agents. The Fenton reaction induces quenching of fluorescence of the AuNCs, and is employed for fluorometric measurement of the H₂O₂ scavenging activity of the model antioxidants ascorbic acid and tartaric acid.

     

An amperometric hydrogen peroxide biosensor based on immobilization of horseradish peroxidase on an electrode modified with magnetic dextran microspheres

A new kind of magnetic dextran microsphere (MDMS) with uniform shape and narrow diameter distribution has been prepared from magnetic iron nanoparticles and dextran. Horseradish peroxidase (HRP) was successfully immobilized on the surface of an MDMS-modified glassy-carbon electrode (GCE), and the immobilized HRP displayed excellent electrocatalytic activity in the reduction of H₂O₂ in the presence of the mediator hydroquinone (HQ). The effects of experimental variables such as the concentration of HQ, solution pH, and the working potential were investigated for optimum analytical performance. This biosensor had a fast response to H₂O₂ of less than 10 s and an excellent linear relationship was obtained in the concentration range 0.20 μmol L⁻¹–0.68 mmol L⁻¹, with a detection limit of 0.078 μmol L⁻¹ (S/N = 3) under the optimum conditions. The response showed Michaelis–Menten behavior at larger H₂O₂ concentrations, and the apparent Michaelis–Menten constant was estimated to be 1.38 mmol L⁻¹. Moreover, the selectivity, stability, and reproducibility of the biosensor were evaluated, with satisfactory results. Figure Amperometric response of the biosensor to successive additions of H₂O₂ and the plot of amperometric response vs. H₂O₂ concentration     

Highly sensitive spectrofluorimetric determination of trace amounts of lecithin

A new spectrofluorimetric method was developed for the determination of trace amounts of lecithin using the ciprofloxacin (CIP)–terbium (Tb³⁺) ion complex as a fluorescent probe. In a buffer solution at pH=5.60, lecithin can remarkably reduce the fluorescence intensity of the CIP–Tb³⁺ complex at λ=545 nm. The reduced fluorescence intensity of the Tb³⁺ ion is proportional to the concentration of lecithin. Optimum conditions for the determination of lecithin were also investigated. The linear range and detection limit for the determination of lecithin were 1.0×10⁻⁶–3.0×10⁻⁵ mol L⁻¹ and 3.44×10⁻⁷ mol L⁻¹, respectively. This method is simple, practical, and relatively free of interference from coexisting substances. Furthermore, it has been successfully applied to assess lecithin in serum samples.      

On the protonation of dibenzo-18-crown-6

Abstract  The stability constant of the dibenzo-18-crown-6·H₃O⁺ cationic complex species dissolved in nitrobenzene saturated with water has been determined from extraction experiments in the two-phase water–nitrobenzene system and from γ-activity measurements. Various structures of protonated dibenzo-18-crown-6 are discussed. Graphical abstract        

Chiral ligand-exchange chromatography of amino acids using porous graphitic carbon coated with a dinaphthyl derivative of neamine

In this paper, we describe the preparation and the evaluation of a porous graphitic carbon (PGC) column coated with a new dinaphthyl derivative of neamine for chiral ligand-exchange (LE) chromatography. It was shown that the graphitic surface/dinaphthyl anchor system efficiently (1.15 μmol/m²) and stably (three months of intensive use) adsorbs the neamine template onto the chromatographic support. The resulting coated PGC stationary phase showed appreciable LE-based enantioselective properties towards several native amino acids. Chromatographic separation of methionine enantiomers using a dinaphtyl neamine-based ligand-exchange chiral stationary phase     

Determination of drug–serum protein interactions via fluorescence polarization measurements

New fast methods for the determination of pharmacokinetic behaviour of potential drug candidates are receiving increasing interest. We present a new homogeneous method for the determination of drug binding and drug competition for human serum albumin and α₁-acid glycoprotein that is amenable to high-throughput-screening. It is based on selective fluorescent probes and the measurement of fluorescence polarization. This leads to decreased interference with fluorescent drugs as compared with previously published methods based on similar probes and the measurement of fluorescence intensity. The binding of highly fluorescent drugs that still interfere with the probes can be measured by simply titrating the drugs in a two-component system with the serum protein. The assay may also be used to discover strongly binding protein ligands that are interesting for drug-targeting strategies. Additionally, binding data could be obtained from larger libraries of compounds for in silico predictive pharmacokinetics. Figure Fluorescence polarization displacement titration of dansylsarcosine (3D-structure as insert) bound to human serum albumin (HSA) by naproxene Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Catechol determination in compost bioremediation using a laccase sensor and artificial neural networks

An electrochemical biosensor based on the immobilization of laccase on magnetic core-shell (Fe₃O₄–SiO₂) nanoparticles was combined with artificial neural networks (ANNs) for the determination of catechol concentration in compost bioremediation of municipal solid waste. The immobilization matrix provided a good microenvironment for retaining laccase bioactivity, and the combination with ANNs offered a good chemometric tool for data analysis in respect to the dynamic, nonlinear, and uncertain characteristics of the complex composting system. Catechol concentrations in compost samples were determined by using both the laccase sensor and HPLC for calibration. The detection range varied from 7.5 × 10^–7 to 4.4 × 10^–4 M, and the amperometric response current reached 95% of the steady-state current within about 70 s. The performance of the ANN model was compared with the linear regression model in respect to simulation accuracy, adaptability to uncertainty, etc. All the results showed that the combination of amperometric enzyme sensor and artificial neural networks was a rapid, sensitive, and robust method in the quantitative study of the composting system. Figure Structure of the magnetic carbon paste electrode used in the electrochemical biosensor