Study on molecular interactions between proteins on live cell membranes using quantum dot-based fluorescence resonance energy transfer

Mouse anti-human CD71 monoclonal antibody (anti-CD71) was conjugated with red quantum dots (QDs; 5.3 nm, emission wavelength λ _em = 614 nm) and used to label HeLa cells successfully. Then green QD-labeled goat anti-mouse immunoglobulin G (IgG; the size of the green QDs was 2.2 nm; λ _em = 544 nm) was added to bind the red-QD-conjugated anti-CD71 on the cell surface by immunoreactions. Such interaction between anti-CD71 and IgG lasted 4 min and was observed from the fluorescence spectra: the fluorescence intensity of the “red” peak at 614 nm increased by 32%; meanwhile that of the “green” one at 544 nm decreased by 55%. The ratio of the fluorescence intensities (I _544 nm/I _614 nm) decreased from 0.5 to 0.2. The fluorescence spectra as well as cell imaging showed that fluorescence resonance energy transfer took place between these two kinds of QDs on the HeLa cells through interactions between the primary antibody and the secondary antibody.     

Determination of Amoxycillin and Clavulanic Acid in Some Pharmaceutical Preparations by Derivative Spectrophotometry

 Derivative spectrophotometry was applied for the simultaneous determination of amoxycillin and clavulanic acid in pharmaceutical preparations: “Augmentin” inj. and tablets and “Amoksiklav” drops and tablets, in solutions after hydrolysis with sodium hydroxide. As the absorption spectra overlap strongly (amoxycillin λ_max = 247 nm and 290 nm, clavulanic acid λ_max = 258 nm) the first and the second derivative spectrophotometric procedure was elaborated for their determination. Amoxycillin was determined at λ = 257.9 nm (1-st derivative spectra) or λ = 273 nm (2-nd derivative) while clavulanic acid at λ = 280.3 nm (1-st derivative) or λ = 285 nm (2-nd derivative spectra). The Beer’s law is obeyed in the range of 0.004–0.04 mg/ml for amoxycillin and 0.002–0.02 mg/ml for clavulanic acid. Received December 6, 1999. Revision August 1, 2000.     

Comparative toxicity study of Ag, Au, and Ag–Au bimetallic nanoparticles on Daphnia magna

A comparative assessment of the 48-h acute toxicity of aqueous nanoparticles synthesized using the same methodology, including Au, Ag, and Ag–Au bimetallic nanoparticles, was conducted to determine their ecological effect in freshwater environments through the use of Daphnia magna, using their mortality as a toxicological endpoint. D. magna are one of the standard organisms used for ecotoxicity studies due to their sensitivity to chemical toxicants. Particle suspensions used in toxicity testing were well-characterized through a combination of absorbance measurements, atomic force or electron microscopy, flame atomic absorption spectrometry, and dynamic light scattering to determine composition, aggregation state, and particle size. The toxicity of all nanoparticles tested was found to be dose and composition dependent. The concentration of Au nanoparticles that killed 50% of the test organisms (LC₅₀) ranged from 65–75 mg/L. In addition, three different sized Ag nanoparticles (diameters = 36, 52, and 66 nm) were studied to analyze the toxicological effects of particle size on D. magna; however, it was found that toxicity was not a function of size and ranged from 3–4 μg/L for all three sets of Ag nanoparticles tested. This was possibly due to the large degree of aggregation when these nanoparticles were suspended in standard synthetic freshwater. Moreover, the LC₅₀ values for Ag–Au bimetallic nanoparticles were found to be between that of Ag and Au but much closer to that of Ag. The bimetallic particles containing 80% Ag and 20% Au were found to have a significantly lower toxicity to Daphnia (LC₅₀ of 15 μg/L) compared to Ag nanoparticles, while the toxicity of the nanoparticles containing 20% Ag and 80% Au was greater than expected at 12 μg/L. The comparison results confirm that Ag nanoparticles were much more toxic than Au nanoparticles, and that the introduction of gold into silver nanoparticles may lower their environmental impact by lowering the amount of Ag which is bioavailable.     

Use of Gemini surfactants to stabilize TiO2 P25 colloidal dispersions

Photocatalytically active TiO₂ P25 nanoparticles, widely used for practical applications, were investigated. The nominal size of TiO₂ P25 nanoparticles is 21 nm, but they easily agglomerate in aqueous media, depending on pH and ionic strength. TiO₂ P25 aqueous dispersions were stabilized by alkanediyl-α,ω-bis-N-dodecyl-N, N′-dimethyl-ammonium bromide, cationic Gemini surfactant. The optimal conditions required to obtain stable dispersions, without formation of large agglomerates, were experienced. The stabilization of TiO₂ P25 nanoparticles by cationic Gemini surfactant was investigated in some details. Different amounts of Gemini surfactant were used, at concentrations between 1.0 and 250 × 10⁻⁶ mol L⁻¹, well below the critical micelle concentration. Dynamic light scattering and zeta potential analyses estimated the particle size and the dispersions stability. When the proper amount of Gemini surfactant was used, the resulting nanoparticles were still poly-disperse, but large agglomerates disappeared and were remarkably redispersible.     

Violet and greenish photoprotein obelin mutants for reporter applications in dual-color assay

Two kinds of Ca²⁺-regulated photoprotein obelin with altered color of bioluminescence were obtained by active-center amino acid substitution. The mutant W92F-H22E emits violet light (λ_max = 390 nm) and the mutant Y139F emits greenish light (λ _max = 498 nm), with small spectral overlap, both display high activity and stability and thus may be used as reporters. For demonstration, the mutants were applied in dual-color simultaneous immunoassay of two gonadotropic hormones—follicle-stimulating hormone and luteinizing hormone. Bioluminescence of the reporters was simultaneously triggered by single injection of Ca²⁺ solution, divided using band-pass optical filters and measured with a two-channel photometer. The sensitivity of simultaneous bioluminescence assay was close to that of a separate radioimmunoassay. Figure Two kinds of Ca²⁺-regulated photoprotein obelin with altered color of bioluminescence were obtained and applied in dual-color simultaneous immunoassay of two gonadotropic hormones.     

A Highly Sensitive Resonance Rayleigh Scattering Method for the Determination of Vitamin B1 with Gold Nanoparticles Probe

In weakly acidic buffer medium, vitamin B₁ (VB₁) interacts with gold nanoparticles to form a binding product, which resulted in a significant enhancement of resonance Rayleigh scattering (RRS) intensity and the appearance of a new RRS spectrum. The maximum RRS peak was at 368 nm, and there are three smaller scattering peaks that were at 284 nm, 440 nm and 495 nm, respectively. The enhanced RRS intensity (ΔI) was directly proportional to the concentration of VB₁ in the range of 0–2.8 × 10⁻⁷ mol L⁻¹. The method had high sensitivity and its detection limit (3σ) was 0.9 ng mL⁻¹. The optimum conditions and the influencing factors have been investigated. The method had good selectivity, which could be observed from the influence of coexisting substances. A sensitive, simple and fast RRS method for the determination of VB₁ with gold nanoparticle probe has been developed. In addition, the reasons for RRS enhancement were discussed.     

Synthesis of polypyrrole nanoparticles by oil-in-water microemulsion polymerization with narrow size distribution

Conductive spherical polypyrrole nanoparticles were obtained by polymerization in oil-in-water (o/w) microemulsions using sodium dodecyl sulfate (SDS) as anionic surfactant, ethanol as co-surfactant, and potassium persulfate (KPS, 0.017 wt.%) as oxidizing agent. The average particle diameter (Dp) of the nanoparticles was between 38 and 45 nm with narrow particle size distributions (D _w/D _n < 1.2). Dp increases with the ethanol concentration due to the intercalation between the polar heads of SDS, promoting instability of the nanoparticles and some coagulation. In this work, low surfactant concentration was used, and the molar ratio of the oxidizing agent to monomer was 8.5 × 10⁻³, a value much lower compared with others reported in the literature. Increasing the ethanol concentration in the recipes enhanced the conductive properties of the polymers due to the high π-conjugation length obtained.     

Formation of silver nanoparticles in formamide:water mixtures: a radiolytic study

The pulse radiolysis of FA and FA:water solutions was studied in the absence and presence of redox indicator 1,1′-dimethyl-4,4′-bipyridinium dichloride (methyl viologen, MV²⁺). The experiments performed in the presence of MV²⁺ have provided strong support to the idea that the first species obtained from the reaction of e_sol⁻ and ^•OH with FA produces radicals that show reactivity towards the MV²⁺. Both the radicals on reaction with MV²⁺ results in the appearance of the well-known intense blue MV^•+ radical absorption signal (λ_max = 395 nm, λ_max = 605 nm). The intermediate radicals formed during radiolysis were used to generate silver nanoparticles.     

Cathodoluminescence Depth Profiling in SiO2:Ge Layers

 For investigation of the luminescent center profile cathodoluminescence measurements are used under variation of the primary electron energy E ₀ = 2…30 keV. Applying a constant incident power regime (E ₀·I ₀ = const), the depth profiles of luminescent centers are deduced from the range of the electron energy transfer profiles dE/dx. Thermally grown SiO₂ layers of thickness d = 500 nm have been implanted by Ge⁺-ions of energy 350 keV and doses (0.5–5)10¹⁶ ions/cm². Thus Ge profiles with a concentration maximum of (0.4 – 4) at% at the depth of d_m≅240 nm are expected. Afterwards the layers have been partially annealed up to T _a = 1100 °C for one hour in dry nitrogen. After thermal annealing, not only the typical violet luminescence (λ = 400 nm) of the Ge centers is strongly increased but also the luminescent center profiles are shifted from about 250 nm to 170 nm depth towards the surface. This process should be described by Ge diffusion processes, precipitation and finally Ge nanocluster formation. Additionally, a Ge surface layer is piled-up extending to a depth of roughly 25 nm.     

Re-examination of 7,7′-dimethyl-7-germanorbornadiene photocleavage in solution and in organic glasses

Dimethylgermylene and its Ge=Ge doubly bonded dimer, tetramethyldigermene, have been characterized directly in solution by 308-nm laser flash photolysis in n-hexane solution, as well as 254-nm photolysis in hydrocarbon glasses at t = 77 K. An absorption band maximum of λ _max ≈ 430 nm and molar absorption coefficient of ε ≈ 2,700 M⁻¹ cm⁻¹ have been shown to be attributable to low-temperature glasses, while the absorption band maximum of λ _max ≈ 480 nm and molar absorption coefficient of ε ≈ 2,400 M⁻¹ cm⁻¹ have been shown to be related to dimethylgermylene in n-hexane solution. The molar absorption coefficient of tetramethyldigermene (λ _max ≈ 380 nm) was determined to be ε ≈ 84,000 M⁻¹ cm⁻¹. The germylene is formed via (formal) cheletropic photocycloreversion of 7,7′-dimethylgerma-1,4,5,6-tetraphenyl-2,3-benzo-norbornadiene. Tetramethyldigermene and 1,2,3,4-tetraphenylnaphthalene in the triplet state were formed, together with dimethylgermylene. We attempted to explain the various contradictory interpretations of experimental data existing in the literature on this reaction.     

Flow cell within an LED: a proposal for an optical absorption detector

Droplets formed at the tip of a tube under the same conditions possess extreme uniformity of form, volume and weight. These properties of liquid drop formation have been known for a long time and consequently many applications for the drop have been found in instrumentation and chemical analysis methods. In the present paper, we report on the analytical use of a dynamic LED-based flow-through optical absorption detector with optical path length controlled by continuous dropping of a solution. This arrangement consists of a flow cell built within a high-intensity red LED (λ _max = 630 nm). The feasibility of the detector is demonstrated by colorimetric determination of methylene blue, and ammonium by Berthelot’s reaction, in a flow-injection system. For ammonium, the reaction forms a blue dye (indophenol) with a maximum absorption at 630–650 nm. The detection limit, considered as 3 times the signal of the blank, is better than 125 μg l^-1. The small flow cell represents a good combination of optical path length, low volume and fast washout. This detector can be used advantageously in automated methods and can represent a solution to problems of optical detection involving gas bubbles and precipitation of particles in turbidimetric applications.     

Flow-injection solid surface lanthanide-sensitized luminescence sensor for determination of <Emphasis Type="Italic">p</Emphasis>-aminobenzoic acid

A single optosensing device based on lanthanide-sensitized luminescence was developed for determination of p-aminobenzoic acid (PABA). The method is based on the formation of a complex between PABA and Tb(III) immobilized on the solid phase (QAE A-25 resin) placed inside the flow cell. NaCl (1 M) was used as carrier solution and HCl (0.05 M) as eluent. The sample solutions of PABA (100 μL) containing Tb(III) and buffered at pH = 6.0 were injected into the carrier stream and the luminescence was measured at λ _ex = 290 nm and λ _em = 546 nm. The method shows a linear range from 0.2 to 6.0 μg mL⁻¹ with an RSD of 1.2% (n = 10) and a sampling frequency of 22 h⁻¹. A remarkable characteristic of the method is its high selectivity which allows it to be satisfactorily applied to the analysis of PABA in pharmaceutical samples without prior treatment. Figure Typical emission bands of Tb(III) in a solid-phase PABA–Tb(III) luminescence spectrum     

Cage Structure Formation of Singly Doped Aluminum Cluster Cations Al<Subscript><Emphasis Type="BoldItalic">n</Emphasis></Subscript><Emphasis Type="BoldItalic">TM</Emphasis><Superscript>+</Superscript> (<Emphasis Type="BoldItalic">TM</Emphasis> = Ti,V, Cr)

Structural information on free transition metal doped aluminum clusters, Al _n TM ⁺ (TM = Ti, V, Cr), was obtained by studying their ability for argon physisorption. Systematic size (n = 5 – 35) and temperature (T = 145 – 300 K) dependent investigations reveal that bare Al _n ⁺ clusters are inert toward argon, while Al _n TM ⁺ clusters attach one argon atom up to a critical cluster size. This size is interpreted as the geometrical transition from surface-located dopant atoms to endohedrally doped aluminum clusters with the transition metal atom residing in an aluminum cage. The critical size, n _crit , is found to be surprisingly large, namely n _crit = 16 and n _crit = 19 – 21 for TM = V, Cr, and TM = Ti, respectively. Experimental cluster–argon bond dissociation energies have been derived as function of cluster size from equilibrium mass spectra and are in the 0.1–0.3 eV range.     

Spectrophotometric Investigation of the Complexing Reaction between Rutin and Titanyloxalate Anion in 50% Ethanol

 In the present work, rutin (3,3′ ,4′ ,5,7-pentahydrohyflavone-3-rhamnoglucoside) was determinated via a complexing reaction with a titanyloxalate anion. K₂[TiO(C₂O₄)₂] and rutin react in 50% ethanol forming a 1:2 complex in a pH range from 4.00 to 11.50, in which the TiO(C₂O₄)₂ ²⁻ ion is linked to rutin through the 4-carbonyl and 5-hydroxyl group. The thermodynamic stability constant log β₂ ⁰ of the complex is determined to 10.80 at pH = 6.50. The change of the standard Gibbs free energy Δ G⁰ amounts to −61 kJċ mol⁻¹, indicating that the process of complex formation is spontaneous. The optimal conditions for the spectrophotometric determination of microconcentrations of rutin are at pH=6.40 and λ= 430 nm, where the complex shows an absorption maximum with a molar absorption coefficient a ₄₃₀=(60±2)ċ10³ dm³ċ mol⁻¹ċ cm⁻¹. The method is applied rutin determination from tablets.     

Synthesis of silica nanoparticles by modified sol–gel process: the effect of mixing modes of the reactants and drying techniques

A modified preparation of silica nanoparticles via sol–gel process was described. The ability to control the particle size and distribution was found highly dependent on mixing modes of the reactants and drying techniques. The mixture of tetraethoxysilane and ethanol followed by addition of water (Mode-A) produced monodispersed powder with an average particle size of 10.6 ± 1.40 nm with a narrow size distribution. The freeze drying technique (FD) further improved the quality of powder. In addition, the freeze dried samples have shown unique TGA decomposition steps which might be related to the well-defined structure of silica nanoparticles as compared to the heat dried samples. DSC analysis showed that FD preserved the silica surface with low shrinkage and generated remarkably well-order, narrow and bigger pore size and pore volume and also large endothermic enthalpies (ΔH _FD = −688 J g⁻¹ vs. ΔH _HD = −617 J g⁻¹) that lead to easy escape of physically adsorbed water from the pore at lower temperature.     

Fluorescent sensing layer for the determination of<Emphasis Type="SmallCaps"> L</Emphasis>-malic acid in wine

An enzymatic method for determining L-malic acid in wine based on an L-malate sensing layer with nicotinamide adenine dinucleotide (NAD⁺), L-malate dehydrogenase (L-MDH) and diaphorase (DI), immobilized by sol-gel technology, was constructed and evaluated. The sol-gel glass was prepared with tetramethoxysilane (TMOS), water and HCl. L-MDH catalyzes the reaction between L-malate and NAD⁺, producing NADH, whose fluorescence (λ _exc = 340 nm, λ _em = 430 nm) could be directly related to the amount of L-malate. NADH is converted to NAD⁺ by applying hexacyanoferrate(III) as oxidant in the presence of DI. Some parameters affecting sol-gel encapsulation and the pH of the enzymatic reaction were studied. The sensing layer has a dynamic range of 0.1–1.0 g/L of L-malate and a long-term storage stability of 25 days. It exhibits acceptable reproducibility [s _r(%)≈10] and allows six regenerations. The content of L-malic acid was determined for different types of wine, and polyvinylpolypyrrolidone (PVPP) was used as a bleaching agent with red wine. The results obtained for the wine samples using the sensing layer are comparable to those obtained from a reference method based on UV-vis molecular absorption spectrometry, if the matrix effect is corrected for.     

Synthesis of crosslinked polymer nanoparticles suitable for the formation of nanolayer organic films

Free radical crosslinking copolymerization of styrene and ethylene glycol dimethacrylate (n_ST/n_EGDM in feed = 5/5) has been investigated in toluene. Variation of the reaction conditions allows the formation of macromolecules with low molecular weight (21.6 kDa and 12 nm in diameter), perfectly soluble branched particles in the early stage of the polymerization. Elongation of the reaction time leads to the formation of soluble/swelling microgels with medium molecular weight (156 kDa and 41–120 nm) and, finally, swelling/particularly soluble colloidal polymer particles with very high molecular weight (3.6 MDa and 59–324 nm). Conversion, molecular weight [by gel permeation chromatography (GPC)], ratio of pendant vinyl groups [by nuclear magnetic resonance (NMR)], size of nanoparticles in swollen [by dynamic light scattering (DLS)] and dried state [by transmission electron microscopy (TEM)], morphology [by scanning electron microscopy (SEM)], and nanolayer film formation (by SEM) were measured. The role of reaction conditions in producing different polymer structures and morphologies was demonstrated.     

Spectrophotometric Investigation of the Complexing Reaction between Rutin and Titanyloxalate Anion in 50% Ethanol

Summary.  In the present work, rutin (3,3′ ,4′ ,5,7-pentahydrohyflavone-3-rhamnoglucoside) was determinated via a complexing reaction with a titanyloxalate anion. K₂[TiO(C₂O₄)₂] and rutin react in 50% ethanol forming a 1:2 complex in a pH range from 4.00 to 11.50, in which the TiO(C₂O₄)₂ ²⁻ ion is linked to rutin through the 4-carbonyl and 5-hydroxyl group. The thermodynamic stability constant log β₂ ⁰ of the complex is determined to 10.80 at pH = 6.50. The change of the standard Gibbs free energy Δ G⁰ amounts to −61 kJċ mol⁻¹, indicating that the process of complex formation is spontaneous. The optimal conditions for the spectrophotometric determination of microconcentrations of rutin are at pH=6.40 and λ= 430 nm, where the complex shows an absorption maximum with a molar absorption coefficient a ₄₃₀=(60±2)ċ10³ dm³ċ mol⁻¹ċ cm⁻¹. The method is applied rutin determination from tablets. Received January 4, 2000. Accepted (revised) February 17, 2000     

Formulas and numerical table for the radial part of overlap integrals with the same screening parameters of Slater-type orbitals

 The numerical properties of the radial part of overlap integrals with the same screening parameters in the form of polynomials in p = ξR over Slater-type orbitals have been studied and obtained by using three different methods. For that purpose, the characteristics of auxiliary functions were used first, then Fourier transform convolution theorem, and recurrence relations for the basic coefficients of A ^s _{n l λ, n ′ l ′λ} were used. The calculations of the radial part of overlap integrals with the same screening parameters were made in the range 1 ≤ n ≤ 75, 1 ≤ n′ ≤ 75, and 10⁻⁶ ≤ p. Received: 18 January 2001 / Accepted: 5 April 2001 / Published online: 27 June 2001     

Preparation and properties of novel cross-linked fluoroalkyl end-capped cooligomeric nanoparticles possessing double decker-type aromatic silsesquioxane segments as core units

Cross-linked fluoroalkyl end-capped cooligomers possessing double decker-type aromatic silsesquioxane segments as core units [R_F-(Ar-SiSQ) _x -(Co-M) _y -R_F] were prepared under mild conditions by the cooligomerizations of fluoroalkanoyl peroxide with the corresponding aromatic silsesquioxane possessing bifunctional vinyl groups (Ar-SiSQ) and comonomers (Co-M) such as acryloylmorpholine (ACMO), N,N-dimethylacrylamide (DMAA) and N-(1,1-dimethyl-3-oxobutyl)acrylamide (DOBAA). Interestingly, these cross-linked fluorinated cooligomers thus obtained were found to form the nanometer size-controlled nanoparticles with a good dispersibility in a variety of solvents including fluorinated aliphatic solvents. These fluorinated cooligomeric nanoparticles were demonstrated to have red-shifted fluorescent emissions related to the presence of aromatic silsesquioxane segments, compared with that of parent aromatic silsesquioxane, indicating that each aromatic moiety in these nanoparticles can interact effectively with each other through the π–π stacking between the aromatic moieties to afford the red-shifted fluorescent emissions. These fluorinated nanoparticles were also applied to the surface modification of poly(methyl methacrylate) (PMMA) to exhibit not only a good oleophobicity imparted by fluorine but also a fluorescent emission behavior related to aromatic silsesquioxane segments in nanoparticles on the modified PMMA surface. More interestingly, cross-linked R_F-(Ar-SiSQ) _x -(DOBAA) _y -R_F cooligomeric nanoparticles interacted with fluorescein to give the corresponding fluorinated cooligomeric particles/fluorescein nanocomposites in methanol. These fluorinated fluorescein nanocomposites were found to afford an extraordinarily enhanced light absorption (λ _max = 441 nm), compared with that of fluoroalkyl end-capped DOBAA oligomer [R_F-(DOBAA) _n -R_F] possessing no aromatic silsesquioxane segments.