Azo polymer colloidal spheres containing different amounts of functional groups and their photoinduced deformation behavior

In this work, colloidal spheres composed of azo polymers with different chromophore loading densities were prepared, and their photoinduced deformation behavior was studied. The colloids were constructed by using a series of amphiphilic epoxy-based random copolymers containing 4-carboxylazobenzene functional groups with different degrees of functionalization (DFs). The colloidal spheres were fabricated through gradual hydrophobic aggregation of the polymeric chains in tetrahydrofuran-H2O dispersion media, which was induced by gradually adding water into the systems. The colloidal spheres were characterized by using transmission electron microscopy and dynamic light scattering. The photoinduced deformation behavior was studied by irradiating the colloidal spheres with a linearly polarized Ar+ laser beam. Results showed that the critical water content (CWC) for the colloid formation is related to the DF of the polymers, and CWC increases with the increase of DF. The hydrodynamic diameter of the colloidal spheres is also related to the DF of the polymers. When the DF of the polymers increases, the average size of the colloids gradually decreases. The hydrodynamic diameter of the colloidal spheres increases as the water dropping rate decreases. When the dropping rate is below 20 microL/s, the size of the colloidal spheres increases abruptly as the dropping rate further decreases. Upon the linearly polarized Ar+ laser beam irradiation, the colloids composed of polymers with different DFs can all be elongated along the polarization direction of the laser beam. As DF increases, the deformation degree characterized by the axial ratio (l/d) almost linearly increases. These observations can give some insight into the photoinduced deformation mechanism and can be used to construct colloids with different sizes and photoresponsive ability.     

Hollow microspheres of amphiphilic azo homopolymers: self-assembly and photoinduced deformation behavior

A unique way to fabricate hollow microspheres by using an amphiphilic azo homopolymer (BP-AZ-CA) and photoinduced deformation behavior of the hollow structures in the solid state are reported.     

Time-resolved polymer deformation using polarized planar array infrared spectroscopy

Polarized planar array infrared (PA-IR) spectroscopy is shown for the first time to be a powerful approach to study the mechanical deformation of polymers. A dual-beam PA-IR spectrometer was built to enable the simultaneous recording of parallel- and perpendicular-polarized spectra at the same sample spot. The technique provides orientation and structural information during and after fast irreversible deformations with a low-ms (or sub-ms) time resolution and a low data scatter. In proof-of-concept experiments, the possibilities of polarized PA-IR spectroscopy are illustrated by studying the deformation of poly(ethylene terephthalate) thin films.     

Two-way shape memory behavior of styrene-based bilayer shape memory polymer plate

In this work, a bilayer shape memory polymer (SMP) composite plate with two-way shape memory behavior is simulated, in which two types of styrene-based SMPs with well-separated glass transition temperatures are assembled in parallel. The finite element (FE) software ABAQUS is selected to exhibit the two-way shape memory effect during the shape recovery step and the Generalized Maxwell Model with the WLF equation is applied to characterize the temperature-dependent properties of the SMP bilayer plates. The effect factors of axial predeformation, thermal expansion coefficient and plate thickness are all considered for the two-way shape memory behavior of the styrene-based bilayer SMP plate. After that, a smart gripper composed of four SMP composite plates is proposed to realize grabbing and releasing functions for one-step and staged heating recovery. The FE results provide some necessary theoretical guidelines for future soft smart structural designs and optimization.     

Thermal-mechanical behavior of styrene-based shape memory polymer tubes

Styrene-based shape memory polymer (SMP) tubes were fabricated and their basic mechanical properties in different deformation states were investigated. The tensile, compression, bending and twisting shape memory properties of the tubes were analyzed and discussed, and the results indicated that SMP tubes exhibit good shape fixity ratio and shape recovery ratio. In addition, the shape recovery behavior was investigated at different heating rates. These experimental results will provide guidance for future applications of SMP tube structures.     

Evaluating shape memory behavior of polymer under deep-drawing conditions

Thermoplastic polyurethanes (TPU) are a popular family of shape memory polymers (SMP) due to their excellent abrasion & weather resistant, and mechanical strength. However, conventional processing operations or their combination with other polymers by adhesion or blending can affect their unique shape memory behavior. Currently, there are no effective methods to study and quantify the shape memory behavior of SMP based polymer laminates as they would respond to deep drawing operations. In this paper, a new method was introduced to effectively quantify the recovery behavior of TPU based polymer laminates undergoing simultaneous stretching and bending operations at different processing temperatures. The results presented show the value of developing a shape recovery characterization method that resembles the stresses of thermoforming to properly assess formability of shape memory polymers used in laminate constructions.     

Mathematical models of behavior of polymer material with shape memory

The algorithm of the behavior of the deformation models of network epoxypolymer heat-shrink sleeves with shape memory in vitreous and highly elastic states upon the formation of spigot adhesive joints was considered.     

Photochemical and thermal isomerization in polymer matrices: Azo compounds in polystyrene

Photochemical and thermal geometrical isomerizations of monoazo compounds have been studied in polystyrene–n-butylbenzene compositions. Cis–trans isomer ratios established by light absorption were found to depend on matrix viscosity. Where the compositions were above their respective glass temperatures, all thermal isomerizations conformed to first-order kinetics. Where compositions were below their respective glass temperatures, the initial isomerization rates were abnormally fast, decaying to normal first-order processes after substantial amounts of reaction had taken place. These effects have been interpreted in terms of the vitreous properties of polystyrene.     

Characterization of deformation behavior of heterogeneous polymer systems using spectroscopic and microscopic methods

Rheo-optical Fourier-transform infrared (FTIR) spectroscopy in combination with Atomic Force Microscopy (AFM) was used to clarify the correlation between the morphology and the mechanical properties of two groups of heterogeneous polymers: different styrene-block-butadiene-block-styrene triblock copolymers and a dynamic vulcanizate based on polypropylene/ethylene-octene-copolymer. In all the polymers investigated the soft phase always oriented more than the hard phase. The degree of orientation in different phases depended on the nature of the phases as well as on the stress distribution in correlation to the morphology and their alignment. The observations at the molecular level corresponded well with the results from morphological studies at the microscopic level, which, in fact, enables an extensive and complex understanding of the structure-properties correlation of these types of polymers.     

Liquid-crystalline polymer brushes: deformation and microphase segregation

A statistical theory of the structure and thermodynamics of a planar brush (‘accordion’) formed by bridged polymer chains containing mesogenic segments and immersed in a solvent is developed. It is shown that deformation of an accordion can lead to the formation of a two-phase structure with coexisting liquid-crystalline (LC) and swollen microphases. Phase diagrams for accordions with different grafting densities are obtained. The influence of anisotropic interaction between mesogenic segments on the structure of phase diagrams is investigated.     

Combinatorial decoding: an approach for universal DNA array fabrication

A fiber optic microsphere-based oligonucleotide array is described that employs the sequence of the oligonucleotide probe attached to each microsphere as positional identifiers. Each microsphere serves as an immobilized array feature, functionalized with a unique single-stranded oligonucleotide sequence and randomly distributed into an array of microwells. To determine the sequences attached to individual microspheres, a series of fluorescently labeled combinatorial-pooled oligonucleotide target solutions was designed. Each combinatorial decoding solution is intended to identify the nucleotide at a particular position on every microsphere in the array. The combinatorial target solutions were synthesized by linking the four possible nucleotides at each position to four different fluorescent reporter dyes. As such, when the solutions were hybridized to the array, one of four possible fluorescent responses was generated for each position on a microsphere probe sequence. Adjusting the stringency of hybridization enabled single-base mismatch discrimination, and the signal with the highest intensity corresponded to the perfect nucleotide match. By consecutively exposing the array to a series of combinatorial decoding pool solutions, it was possible to simultaneously determine the sequence of every randomly positioned oligonucleotide-functionalized microsphere in the array. Once mapped, the microsphere array can be used for any typical genomic microarray experiment.     

含蒽醌生色团的水溶性聚合物的制备及其光致电子转移

采用1-氨基蒽醌经酰氯化,合成含双键的单体,再与丙烯酰胺单体共聚,随后对共聚物进行了Hofmann反应,制得含伯胺侧基和蒽醌生色团的水溶性聚合物．利用傅立叶红外光谱、核磁共振氢谱及紫外,可见光等测试手段对所合成的聚合物的结构进行了表征,并探讨了含蒽醌生色团的水溶性聚合物的光致电子转移性能．     

Miscibility and deformation behavior in some thermoplastic polymer blends containing poly(styrene-co-acrylonitrile)

Miscibility in blends of poly(styrene-co-acrylonitrile) (PSAN) with several other polymeric components has been investigated over a range of compositions by means of thermal analysis and transmission electron microscopy. Systems in vestigated were (i) PSAN/polycarbonate (PC), (ii) PSAN/styrene-maleic anhydride-methyl methacrylate terpolymer (S/MA/MM), (iii) PSAN/polynorbornene nitrile (PNN), and (iv) PSAN//S/MA/MM//PC. PSAN/PC was demonstrated to be partially miscible in all proportions over the PSAN copolymer composition range 23–70 wt % AN, while the miscibility or lack thereof of PSAN//S/MA/MM depended on the relative AN and MA contents of the PSAN and S/MA/MM, respectively. In contrast, PSAN/PNN was found to be immiscible in all proporations, while the system PSAN//S/MA/MM//PC was shown to be partially miscible. Deformation studies performed on rubber-modified versions of these blends defined deformation mode and microstructural deformation behavior. Dual extensometer tensile testing yielded relative contributions of crazing and of plastic flow, which correlated both with blend composition and with toughness. TEM observations of deformed specimens indicated a deformation process in the multiphase matrix blends consisting of craze initiation and propagation in the rubber-containing phase, craze arresting in the ductile second matrix phase, and coordinated extensive deformation of the matrix phases and of the rubber particles, where the ability to support the latter coordinated forms of deformation were observed to increase with increasing proportion of plastically deforming phase.     

Hollow polymer shells from biological templates: fabrication and potential applications

Three-dimensional ultrathin polymer shells have been produced by a combination of step-by-step adsorption of polyelectrolytes on glutaraldehyde-treated human erythrocytes and subsequent solubilization of the cytoplasmatic constituents by means of a deproteinizing agent. The obtained hollow films preserve both the size and shape of the templating cells. This opens a pathway for the fabrication of polymeric capsules within a wide range of size and shape by using various biological templates. They may have exciting potential applications, such as templates for nanocomposites, as containers for a large class of materials, or as cages for chemical reactions. The thickness of the films can be adjusted over a large range: from a few nm up to several tens of nm. The polymer shells are permeable to small molecules and ions but not to macromolecules. An increase in the ionic strength of the solution up to 100 mmol make the capsules permeable for proteins. Permeability and conductivity studies have provided evidence that the adsorption of lipids on polyelectrolyte layers is a means of producing capsules with controlled permeability properties. 6-Carboxyfluorescein and Rhodamin 6G were precipitated within the capsules.     

Azo supramolecules on Au(111) with controlled size and shape

Using a subtle balance between weak intermolecular C-H...N hydrogen bonds and molecule-surface interactions, supramolecules of azobenzene-related molecules on Au surfaces were prepared. For analysis, modeling based on first-principles calculations was performed.     

Flexible fabrication and applications of polymer nanochannels and nanoslits

Fluidic devices that employ nanoscale structures (<100 nm in one or two dimensions, slits or channels, respectively) are generating great interest due to the unique properties afforded by this size domain compared to their micro-scale counterparts. Examples of interesting nanoscale phenomena include the ability to preconcentrate ionic species at extremely high levels due to ion selective migration, unique molecular separation modalities, confined environments to allow biopolymer stretching and elongation and solid-phase bioreactions that are not constrained by mass transport artifacts. Indeed, many examples in the literature have demonstrated these unique opportunities, although predominately using glass, fused silica or silicon as the substrate material. Polymer microfluidics has established itself as an alternative to glass, fused silica, or silicon-based fluidic devices. The primary advantages arising from the use of polymers are the diverse fabrication protocols that can be used to produce the desired structures, the extensive array of physiochemical properties associated with different polymeric materials, and the simple and robust modification strategies that can be employed to alter the substrate's surface chemistry. However, while the strengths of polymer microfluidics is currently being realized, the evolution of polymer-based nanofluidics has only recently been reported. In this critical review, the opportunities afforded by polymer-based nanofluidics will be discussed using both elastomeric and thermoplastic materials. In particular, various fabrication modalities will be discussed along with the nanometre size domains that they can achieve for both elastomer and thermoplastic materials. Different polymer substrates that can be used for nanofluidics will be presented along with comparisons to inorganic nanodevices and the consequences of material differences on the fabrication and operation of nanofluidic devices (257 references).     

Surface topography and its transition of nematic elastomers due to photoinduced deformation

Due to the disruption of liquid-crystal order caused by photoisomerization of the rodlike molecules, solids containing light-sensitive molecules such as nematic liquid-crystal elastomers can undergo large reversible shape changes when stimulated by light. In this paper, we study surface deformation of such solids illuminated by light based on a phenomenological model. Numerical computation shows that the deformation topography of the surface depends remarkably on the spot radius of light. The result is expected helpful to practical applications related to the creation of surface patterns, such as guidance of microfluids and manipulation of nanostructures.     

Combinational synthesis of oligonucleotides and assembly fabrication of oligonucleotide array

In this paper, a simple, reliable and flexible method, which integrated in situ synthesis with the spotting technique, was reported to fabricate oligonucleotide array. Different oligonucleotide sequences are synthesized on their relative code glass slides through combinational chemistry, thus the slides are broken into smaller pieces, in which the same code pieces have the same probe sequences. An oligonucleotide array is fabricated by arbitrarily assembling these different code pieces onto another solid substrate. In principle experimentation, four different sequences of P16 gene were synthesized and a 5 × 5 array including these four sequences and the control black was fabricated. The analysis results indicated that the hybridization fluorescence intensity of the same sequences locating different sets on the array gave the approximate values, and the fluorescence intensity ratio of matched sequence to one middle location base mismatched, two base mismatched, three middle base mismatched is (1.000 ± 0.080):(0.4991 ± 0.0671):(0.2360 ± 0.0044):(0.0493 ± 0.0033). Their relative accuracies were from 6.64 to 10.2%. This result might be used to rapidly screen single-nucleotide polymorphisms (SNPs).     

Thermal- and photoinduced spin-state switching in an unprecedented three-dimensional bimetallic coordination polymer

The compound {Fe(pmd)[Ag(CN)2][Ag2(CN)3]} (pmd=pyrimidine) was synthesized and characterized. Magnetic, calorimetric and single crystal visible spectroscopic studies demonstrate the occurrence of a two-step high-spin (HS) right arrow over left arrow low-spin (LS) transition. The critical temperatures are T(c1)=185 and T(c2)=148 K. Each step involves approximately 50 % of the iron centers, with the low-temperature step showing a hysteresis of 2.5 K. The enthalpy and entropy variations associated with the two steps are DeltaH(1)=3.6+/-0.4 kJ mol(-1) and DeltaS(1)=19.5+/-3 J K(-1) mol(-1); DeltaH(2)=4.8+/-0.4 kJ mol(-1) and DeltaS(2)=33.5+/-3 J K(-1) mol(-1). Photomagnetic and visible spectroscopy experiments show that below 50 K, where the LS state is the thermodynamically stable state, the compound can be switched quantitatively to the HS state using green-red light (550-650 nm). HS-to-LS relaxation experiments in the dark at temperatures between 15 and 55 K show that the relaxation takes place via a two-step cooperative process, which was analyzed in the context of the mean field theory. The crystal structure has been studied at 290, 220, 170, 90 and 30 K together with 30 K after irradiation. The compound adopts monoclinic symmetry (P2(1)/c, Z=16) at all temperatures. There are five [FeN6] pseudo-octahedral sites linked by pmd, [Ag(CN)2]- and [Ag2(CN)3]- bridging ligands to form an unprecedented three-dimensional (6,6) topology. The structural analysis allows for an understanding of the microscopic mechanism of the two-step behavior of the thermally induced spin transition as well as the corresponding relaxation of the photoexcited compound based on the individual changes of the five sites. Synergy between metallophilic interactions and the spin transition is also shown by the variation of the AgAg distances. Correlations between the variation of the unit-cell volume and the change of AgAg interactions within each step with the asymmetric change of the anomalous heat capacity have also been inferred.