Starch Gelatinization Kinetics in Bread Dough. DSC investigations on 'simulated' baking processes

Starch gelatinization in wheat flour dough of various moisture contents was quantitatively evaluated by means of DSC. The experimental records were worked out in the form of excess heat capacity vs. T traces which were deconvoluted to single out the contribution of starch gelatinization from that of the decomposition of amylose-lipid complexes. The quantitative procedure used put into evidence that a third endothermic process would take place in the dough with a poor moisture content. DSC runs carried out with sealed pans (i.e., at constant moisture level) and open pans (from which some water was free to evaporate) allow simulation of two extreme conditions of a real baking process, namely that relevant to the central core and to superficial layer of a dough loaf, respectively. The extent of starch gelatinization occurred in these conditions was quantitatively assessed. These data were collected at various heating rates and used to define temperature-time-transformation(TTT) diagrams which are useful tools to predict the progress of baking for any given thermal history of the system. This revised version was published online in July 2006 with corrections to the Cover Date.     

The effect of various potato cultivars at different times during growth on starch content determined by DSC

Differential scanning calorimetry (DSC) was used to determine the starch content of potato dry matter isolated from various cultivars at different times during growth. When potato dry matter was heated in the presence of excess water, a symmetrical endothermic peak resulted, which was similar to the gelatinization peak of pure starch. From the enthalpy value of potato dry matter and pure potato starch at a moisture content of 70%, the starch content in the potato dry matter can be determined. Starch content increased as growth progressed to a maximum and then decreased. The effect of moisture content and sample mass on gelatinization of dry matter and starch was also investigated. Compared to other starch analysis technique, DSC is a simple and more rapid method.     

An insight into tapioca and wheat starch gelatinization mechanisms using TD-NMR and complementary techniques

To provide evidence for previously proposed assumptions concerning starch gelatinization sub-mechanisms, a more detailed investigation was carried out using multiscale analysis of a starch type selected for its marked difference. Tapioca starch was chosen due to its cohesive/springy properties and its growing use in the food industry. Time-domain nuclear magnetic resonance (TD-NMR) was used to investigate the leaching of material, water absorption and crystallite melting in hydrated tapioca starch (45%). The interpretation of T2 mass intensity evolutions, especially those of the (intra- and extra-granular) aqueous phases, was discussed drawing on complementary techniques such as microscopy, Rapid Visco Analyser (RVA), differential scanning calorimetry (DSC) and swelling factor (SF) and solubility index (SI) measurements. Results show that the T2 assignments usually proposed in the literature are dependent on starch origin. The differences in T2 evolutions (value and mass intensity) observed between wheat and tapioca starches at intermediate hydration levels could be linked to the different gelatinization behaviour of tapioca starch involving the latter's higher granule rupture level, higher gelatinization temperature and greater swelling power above its gelatinization temperature.     

Evaluation of black tea polyphenol extract against the retrogradation of starches from various plant sources

The effects of black tea polyphenol extract (BTPE) on the retrogradation of starches from different plant sources were studied using differential scanning calorimetry (DSC) and X-ray diffraction (XRD). DSC analysis shows that the gelatinization temperature of maize starch and starches from different rice varieties increased with increasing BTPE level. After storage at 4 °C, BTPE at a concentration of 15% markedly retarded the retrogradation of maize starch and starches from different rice varieties. Native maize starch and starches from different rice varieties showed typical A-type X-ray diffraction patterns, while native potato starch showed a typical B-type X-ray diffraction pattern. Adding BTPE significantly affected the crystalline region and intensities of X-ray diffraction peaks of maize and rice starch granules. It is concluded that adding BTPE markedly inhibits the retrogradation of maize starch and starches from different rice varieties, but has no significant influence on the gelatinization and retrogradation characteristics of potato starch.     

用酶分解法研究淀粉糊化

本文用酶分解法对土豆、甘薯和玉米三种淀粉,在不同条件下的糊化作了研究。得出了三种淀粉开始和完全糊化的温度和时间;测定了糊化反应的动力学,并从糊化温度与反应速度常数的关系,计算了各种淀粉糊化的活化能,还根据Vant Hoff公式计算了三种淀粉糊化的有效热焓变化。     

Thermal behaviour of corn starch granules under action of fungal α-amylase

Corn starch, partially hydrolyzed by fungal α-amylase was investigated by using thermal analysis, microscopy and X-ray diffraction. After enzymatic treatment lower degradation onset temperatures were observed. DSC analysis showed almost similar range of gelatinization temperature, however, the enthalpies of gelatinization increased for the partially hydrolyzed starch granules. According to the X-ray diffraction analysis, stronger cereal pattern peaks were recognized after enzymatic digestion. The results suggested that the hydrolysis was more pronounced in the amorphous part of the starch granules.     

Effect of Soil Type and Application of Ecological Fertilizer Composed of Ash from Biomass Combustion on Selected Physicochemical,Thermal, and Rheological Properties of Potato Starch

The aim of the study was to assess the effect of soil type and the application of fertilizer composed of ashes from biomass combustion to potatoes on selected physicochemical, rheological, and thermal properties of potato starches isolated by using the laboratory method. Potatoes were grown in Haplic Luvisol (HL) and Gleyic Chernozem (GC) soil and fertilized with different doses of biomass combustion ash (D1–D6) with different mineral contents. The thermodynamic characteristics of gelatinization and retrogradation were identified by DSC. The analyses of rheological properties included the determination of the gelatinization characteristics by using the RVA method, flow curves, and assessment of the viscoelastic properties of starch gels. It was found that the starches tested contained from 24.7 to 29.7 g/100 g d.m. amylose, and the clarity of 1% starch pastes ranged from 59% to 68%. The gelatinization characteristics that were determined showed statistically significant differences between the starches analyzed in terms of the tested factors. The value of maximum viscosity and final viscosity varied, respectively, in the range of 2017–2404 mPa·s and 2811–3112 mPa·s, respectively. The samples of the potato starches studied showed a non-Newtonian flow, shear thinning, and the phenomenon of thixotropy. After cooling, the starch gels showed different viscoelastic properties, all of which were weak gels (tan δ = G″/G′ > 0.1).     

Application of differential scanning calorimetry in food research and food quality assurance

Differential scanning calorimetry (DSC) is the most widely used thermal analytical technique in food research and it has a great utility in quality assurance of food. Proteins are the most studied food components by thermal analysis including studies on conformation changes of food proteins as affected by various environmental factors, thermal denaturation of tissue proteins, food enzymes and enzyme preparations for the food industry, as well as effects of various additives on their thermal properties. Freezing-induced denaturation of food proteins and the effect of cryoprotectants are also monitored by DSC. Polymer characterization based on DSC of polysaccharides, gelatinization behaviour of starches and interaction of starch with other food components can be determined, and phase transitions during baking processes can be studied by DSC. Studies on crystallization and melting behaviour of fats observed by DSC indicate changes in lipid composition or help characterizing products. Thermal oxidative decomposition of edible oils examined by DSC can be used for predicting oil stability. Using DSC in the freezing range has a great potential for measuring and modelling frozen food thermal properties, and to estimate the state of water in foods and food ingredients. Research in food microbiology utilizes DSC in better understanding thermoadaptive mechanisms or heat killing of food-borne microorganisms. Isothermic microcalorimetric techniques provide informative data regarding microbial growth and microbial metabolism.     

Starch-lipid interactions studied by differential scanning calorimetry

The amylose-lipid complex shows an endothermic transition around 100 °C in excess water. Complexes were prepared by adding lipids to an amylose-solution, and the precipitated complex was studied in the DSC during a heating and cooling sequence. The thermal stability of the complex depends on the lipid part, and the reversibility during cooling depends on presence of excess lipids.The influence of lipids on the gelatinization of starch was studied by adding lipids to wheat and potato starch, respectively, before the DSC-analysis. Depending on the lipid, an earlier as well as a delayed gelatinisation could be obtained.     

Structural, physico-chemical, thermal and pasting properties of potato (Solanum tuberosum L.) flour

In this work, two varieties of potato flour (Ágata and IAPAR Cristina) were studied by simultaneous thermogravimetry–differential thermal analysis (TG–DTA), differential scanning calorimetry (DSC), rapid viscoamylographic analysis (RVA), and microscopy (NC-AFM) that were compared with conventional physico-chemical analysis, according different granulometry of each flour. Flours of IAPAR Cristina showed higher levels of starch, fiber, and phosphate and it showed higher thermal stability (TG–DTA), as well as higher pasting temperature and viscosity (RVA), and lower enthalpy of gelatinization (DSC) in the two granulometries. Flours of Agata showed higher gelatinization enthalpy (DSC) and lower pasting temperature (RVA). Atomic force microscopy—non contact method (NC-AFM), was important to check for protrusions and pores of the flour surfaces. The differences between cultivars can be attributed mainly to the genotypes and growth conditions of the tubers, which can modify the flour properties.     

Effect of additives on gelatinization,rheological properties and biodegradability of thermoplastic starch

Effect of additives on the starch gelatinization was governed by the processing conditions. The order-disorder transition of starch in water can occur in more than one way and the effect of polar additives on gelatinization can also be in more than one way. The additives appear to be plasticising thermoplastic starches, resulting in improving rheological properties. The thermoplastic starches with the additives are all biodegradable although the rates of biodegradability are slightly different.     

Effect of Continuous and Discontinuous Microwave-Assisted Heating on Starch-Derived Dietary Fiber Production

Dietary fiber can be obtained by dextrinization, which occurs while heating starch in the presence of acids. During dextrinization, depolymerization, transglycosylation, and repolymerization occur, leading to structural changes responsible for increasing resistance to starch enzymatic digestion. The conventional dextrinization time can be decreased by using microwave-assisted heating. The main objective of this study was to obtain dietary fiber from acidified potato starch using continuous and discontinuous microwave-assisted heating and to investigate the structure and physicochemical properties of the resulting dextrins. Dextrins were characterized by water solubility, dextrose equivalent, and color parameters (L* a* b*). Total dietary fiber content was measured according to the AOAC 2009.01 method. Structural and morphological changes were determined by means of SEM, XRD, DSC, and GC-MS analyses. Microwave-assisted dextrinization of potato starch led to light yellow to brownish products with increased solubility in water and diminished crystallinity and gelatinization enthalpy. Dextrinization products contained glycosidic linkages and branched residues not present in native starch, indicative of its conversion into dietary fiber. Thus, microwave-assisted heating can induce structural changes in potato starch, originating products with a high level of dietary fiber content.     

In situ thermal decomposition of starch with constant moisture in a sealed system

This paper reports a DSC study of the thermal decomposition of starch kept at constant moisture content (0-50%) in a sealed system comprising a high-pressure stainless steel pan with a gold-plated copper seal. The advantage of this technique is that it facilitates the detection and study of the processes of thermal decomposition of starch with constant moisture content, which is a common scenario in the processing of thermoplastic starches. It was found that the decomposition temperature decreased with increasing water content, and that the peak in decomposition temperature broadened, which is different to the case observed in open, unsealed systems.     

Physicochemical,Thermal and Rheological Properties of Pectin Extracted from Sugar Beet Pulp Using Subcritical Water Extraction Process

The objective of this study was to characterize the properties of pectin extracted from sugar beet pulp using subcritical water (SWE) as compared to conventional extraction (CE). The research involved advanced modeling using response surface methodology and optimization of operational parameters. The optimal conditions for maximum yield of pectin for SWE and CE methods were determined by the central composite design. The optimum conditions of CE were the temperature of 90 °C, time of 240 min, pH of 1, and pectin recovery yield of 20.8%. The optimal SWE conditions were liquid-to-solid (L/S) ratio of 30% (v/w) at temperature of 130 °C for 20 min, which resulted in a comparable yield of 20.7%. The effect of obtained pectins on viscoamylograph pasting and DSC thermal parameters of corn starch was evaluated. The contents of galacturonic acid, degree of methylation, acetylation, and ferulic acid content were higher in the pectin extracted by SWE, while the molecular weight was lower. Similar chemical groups were characterized by FTIR in both SWE and CE pectins. Color attributes of both pectins were similar. Solutions of pectins at lower concentrations displayed nearly Newtonian behavior. The addition of both pectins to corn starch decreased pasting and DSC gelatinization parameters, but increased ΔH. The results offered a promising scalable approach to convert the beet waste to pectin as a value-added product using SWE with improved pectin properties.     

A small-angle x-ray scattering study of starch gelatinization in excess and limiting water

The architecture of the starch granule, and its subsequent disruption due to the application of heat and water, known as gelatinization, is of wide interest. Small-angle x-ray scattering (SAXS) techniques have been used to study gelatinization in limiting and excess water. SAXS allows the absorption of water into the differing regions of the starch granule to be monitored. In excess water, a process of cooperative melting can be seen. In limiting water, the crystalline order melts at a higher temperature. These features have been studied, and observed features of the gelatinization related to those known from other techniques. © 1993 John Wiley & Sons, Inc.     

Thermal analysis of the rice and by-products

The thermogravimetry (TG) is a technique used in the quality control of foods. In this work the moisture and ash contents in the rice and by-products (bran and husk), the thermal stability and the gelatinization process by conventional, thermogravimetric and calorimetric methods were studied. The moisture and ash contents obtained by TG and conventional methods did not present significant differences. The rice presented higher starch content, while the bran presented higher protein content. The thermogravimetric data presented the following thermal stability order: rice>bran>husk. The calorimetric curves indicated the gelatinization of the starch. The kinetic parameters were compatible. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal transitions of cassava starch at intermediate water contents

Order-disorder transitions were investigated in native cassava starch at intermediate moisture contents (35 to 60% wt. water), using Differential Scanning Calorimetry (DSC) and dynamic Wide Angle X-ray Diffractometry (WAXS) with a synchrotron radiation source.The gelatinization of granules occurs as a cooperative process, due to constraints induced in crystallites by the amorphous areas. Variations of water content (water volume fraction from 0.28 to 0.86) and heating rate (0.2–10C min^–1) allowed access to equilibrium melting conditions. Cassava starch exhibits a higher melting temperature of the undiluted starch (T _m ^o ) and an equivalent melting enthalpy of the repeating glucosyl unit (H _u), compared to other A-type starches. At intermediate water content (45% wt. water), a two-stage melting process is evidenced, with different kinetic rates below and above 75 C.We wish to thank F. Lavigne (URA, CNRS 1218, Chatenay Malabry) for valuable help with this work and C. Bourgaux from L.U.R.E. for helping us with dynamic X-ray diffraction experiments. The present study was supported by a grant from the European Communities (STD3-CT92-0110).     

Phase transitions of cassava starch dispersions prepared with glycerol solutions

The aim of this work was to study the glass transition, the glass transition of the maximally freeze-concentrated fractions, the ice melting and the gelatinization phenomenon in dispersions of starch prepared using glycerol-water solutions. The starch concentration was maintained constant at 50 g cassava starch/100 g starch dispersions, but the concentration of the glycerol solutions was variable (C _g= 20, 40, 60, 80 and 100 mass/mass%). The phase transitions of these dispersions were studied by calorimetric methods, using a conventional differential scanning calorimeter (DSC) and a more sensitive equipment (micro-DSC). Apparently, in the glycerol diluted solutions (20 and 40%), the glycerol molecules interacted strongly with the glucose molecules of starch. While in the more concentrated glycerol domains (C _g>40%), the behaviour was controlled by migration of water molecules from the starch granules, due to a hypertonic character of glycerol, which affected all phase transitions.     

Comparison of A and B starch granules from three wheat varieties

Three starches from the wheat varieties AK58, ZM18 and YZ4110 were separated into large (A) and small (B) granules, which were characterized structurally and evaluated for their functional properties. SEM results showed that the size of A-granules from ZM18 and YZ4110 were about the same, but the sizes of A-granules and B-granules from AK58 were larger than those of ZM18 and YZ4110. FTIR spectra showed that all the samples exhibited a similar pattern, with seven main modes with maximum absorbance peaks near 3,500, 3,000, 1,600, 1,400, 1,000, 800, 500 cm-1. The B-granules of ZM18 and YZ4110 had less amylose content, although the difference among the total amylose contents of the three unfractionated starches was not significant. X-ray diffraction (XRD) patterns showed predominantly A-type crystallinity for all the starches. The A-granules showed sharper XRD patterns than the other starches. DSC analysis showed that the A-granules had broader ranges of gelatinization temperatures than the B-granules from the same wheat variety. The gelatinization enthalpy (ΔH) of A-granules was higher than that of B-granules. AK58 exhibited the smallest enthalpy, while ZM18 showed the largest enthalpy. In pasting tests, the A-granule starch of AK58 had higher peak, final and setback viscosity, lower breakdown and pasting temperature, and the B-granule starch and unfractionated starch of AK58 had lower peak, breakdown, final and setback viscosity and higher pasting temperature than ZM18 and YZ4110.     

大米淀粉膜的制备及其性能

大米淀粉颗粒粒径较小且均匀,在水中有较好的分散性,具有良好的成膜性并且可以在自然中降解,在食品包装、医用敷料及化妆品行业中有着广泛的应用。以大米淀粉为原料,NaOH为糊化剂,甘油为增塑剂,柠檬酸为交联剂和pH调节剂,采用流延法制备了淀粉膜。通过对淀粉颗粒的形貌观察及糊化温度、淀粉溶液的表观粘度及pH值测定、淀粉膜的力学性能、透光率及承载甘草酸二钾释放性能等的测定,研究了大米淀粉的糊化条件,柠檬酸、淀粉和甘油质量分数对淀粉膜性质的影响以及承载物质的释放情况。结果表明,大米淀粉呈光滑的多边形颗粒,直径为5~8 μm,在偏光显微镜下呈现马耳他十字结构,糊化温度范围为82.5~100.8 ℃。柠檬酸在淀粉成膜过程中会与淀粉分子相互作用,同时能够调节溶液的pH值以适应人体皮肤。淀粉质量分数越高,淀粉膜断裂伸长率越低,拉伸强度越高;甘油质量分数越高,淀粉膜断裂伸长率越高,拉伸强度越低。在甘油质量分数为3.0%时淀粉膜透光率最佳,结晶度最低。制备的淀粉膜能够承载且能高效释放抗炎物质甘草酸二钾,在护肤领域具有广泛的应用前景。