Fluorene based donor‐acceptor polymer electrets for nonvolatile organic transistor memory device applications

Fluorene based donor‐acceptor polyimides, including poly[bis‐(4‐aminophenyl)fluorene‐hexanediamide] [PA(BAP F‐AC)], poly[bis‐(4‐aminophenyl)fluorene‐hexafluoroisopropylidenediphthalimide] [PI(BAPF‐6FDA)], poly[bis‐(4‐aminophenyl)fluorene‐oxydiphthalimide] [PI(BAPF‐ODPA)], and poly[bis‐(4‐aminophenyl)fluorene‐1,2,4,5‐cyclohexanetetracarboxylic diimide] [PI(BAPF‐HPMDA)], as charge storage layer (electret) are employed for nonvolatile memory device applications. The polyimides are consisted of electron‐donating fluorene diamine moiety (BAPF) and neutral (AC and HPMDA) or electron‐accepting (6FDA and ODPA) moieties, respectively. The memory characteristics of these devices can be tuned from the EORM (erase once and read many times) behavior [PA(BAPF‐AC)], semi‐flash [PI(BAPF‐ODPA)], [PI(BAPF‐HPMDA)], to a flash type memory [PI(BAPF‐6FDA)]. The PI(BAPF‐6FDA) devices show the largest memory window of 77 V and a long retention time over 10⁴ s with a high I_on/I_off current ratio of 10⁸. This is attributed to the largest torsion angle of PI(BAPF‐6FDA) stabilizing charge transfer (CT) complexes. The write‐read‐erase‐read cycles were stably operated over 100 cycles. This work provides a new insight into the relationship between the CT effect and the nonvolatile memory behavior. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 602–614     

Synthesis of soluble poly(para‐phenylene) with a long polymer chain: Characteristics of regioregular poly(1,4‐phenylene)

Soluble poly(para‐phenylene) having a long polymer chain (more than six repeat units) was synthesized with a tert‐butyl end‐group (t‐PPP) and was found to have improved solubility and excellent optical properties. Poly(1,3‐cyclohexadiene) (PCHD) consisting of only 1,4‐cyclohexadiene (1,4‐CHD) units was synthesized with a tert‐butyl end‐group (t‐PCHD), and completely dehydrogenated to obtain t‐PPP. This end‐group effectively prevented the crystallization of t‐PPP, and polymers containing up to 16 repeat units were soluble in tetrahydrofuran. Soluble t‐PPP obtained had an ability to form a tough thin film prepared by spin‐coating method. Optical analyses of t‐PPP provided strong evidence for a linear polymer chain structure. A block copolymer of t‐PPP and a soluble polyphenylene (PPH) was then synthesized, and the excellent optical properties were retained by this block copolymer along with its solubility. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5223–5231, 2008     

Influence of physical aging on the performance of corona‐charged amorphous polymer electrets

The influence of physical aging on the electret properties before corona charging of three amorphous polymers, polyetherimide (PEI), poly(phenylene ether) (PPE), and polystyrene (PS), as well as with blends of PPE and PS, was investigated. The degree of aging was monitored by determining the enthalpy relaxation Δh using differential scanning calorimetry (DSC). The electret performance was evaluated by isothermal potential decay (ITPD) at elevated temperatures and by thermal stimulated discharge (TSD) measurements. It was demonstrated that physical aging below the glass transition temperature substantially improves the electret performance of amorphous polymers by reducing the free volume and thus hindering charge motion. As an example, the performance of nonaged PEI was improved by physical aging at 200 °C for 4 days from 18 to 95% retained charge after 24 h at 120 °C. A similar beneficial influence of physical aging on the charge storage capability was achieved using blends of PPE with PS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 990–997, 2010     

Random poly(3‐hexylthiophene‐co‐3‐cyanothiophene‐co‐3‐(2‐ethylhexyl)thiophene) copolymers with high open‐circuit voltage in polymer solar cells

For the purpose of developing poly(3‐hexylthiophene) (P3HT) based copolymers with deep‐lying highest occupied molecular orbital (HOMO) levels for polymer solar cells with high open‐circuit voltage (V_oc), we report a combined approach of random incorporation of 3‐cyanothiophene (CNT) and 3‐(2‐ethylhexyl)thiophene (EHT) units into the P3HT backbone. This strategy is designed to overcome CNT content limitations in recently reported P3HT‐CNT copolymers, where incorporation of more than 15% of CNT into the polymer backbone leads to impaired polymer solubility and raises the HOMO level. This new approach allows incorporation of a larger CNT content, reaching even lower‐lying HOMO levels. Importantly, a very low HOMO level of ?5.78 eV was obtained, representing one of the lowest HOMO values for exclusively thiophene‐based polymers. Lower HOMO levels result in higher V_oc and higher power conversion efficiencies (PCE) compared to the previously reported P3HT‐CNT copolymers containing only 3‐hexylthiophene and CNT units. As a result, solar cells based on P3HT‐CNT‐EHT(15:15) , which contains 70% of P3HT, 15% of CNT and 15% of EHT, yield a V_oc of 0.83 V in blends with PC₆₁BM while preserving high fill factor (FF) and high short‐circuit current density (J_sc), resulting in 3.6% PCE. Additionally, we explored the effect of polymer number‐average molecular weight (M_n) on the optoelectronic properties and solar cell performance for the example of P3HT‐CNT‐EHT(15:15). The organic photovoltaic (OPV) performance improves with polymer M_n increasing from 3.4 to 6.7 to 9.6 kDa and then it declines as M_n further increases to 9.9 and to 16.2 kDa. The molecular weight study highlights the importance of not only the solar cell optimization, but also the significance of individual polymer properties optimization, in order to fully explore the potential of any given polymer in OPVs. The broader ramification of this study lies in potential application of these high band gap copolymers with low‐lying HOMO level in the development of ternary blend photovoltaics as well as tandem OPV. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1526–1536     

A π‐stacked and conjugated hybrid based on poly(N‐vinylcarbazole) postfunctionalized with terfluorene for stable deep‐blue hole‐transporting materials

The combination of π‐stacked with π‐conjugated building blocks offers an essential strategy to construct multifunctional organic semiconductors (MOSs) with the unique optoelectrical properties. Covalent hybrids can efficiently avoid the intrinsic phase‐separation defects in corresponding blend system. In this contribution, poly(vinylcarbazole) tethered with terfluorene, PVK‐TF, as a double‐channeled π‐stacked and π‐conjugated hybrid (SCH), has been constructed via Friedal‐Crafts click postmodification (FCCP). The chemical structure and optoelectrical property were determined by GPC, UV–vis, PL, TGA, DSC, and CV. Its PL spectra in the annealing thin film at N₂ atmosphere without low‐energy emission bands centered at the 530 nm indicates that no π‐stacks between carbazole and TF or among TFs dominate the whole condensed phase, which is in agreement with the intrachain T‐shaped π‐pitched motifs in molecular modeling simulation due to steric hindrance effect in complicated diarylfluorenes (CDAFs). A supporting prototype stable deep‐blue PLED was successfully obtained with an Internationale de l'Eclairage (CIE) coordinates of (0.20, 0.10) and a width at half maximum (FWHM) of about 60 nm at high current density of 100 mA/cm² (35 V). Deep‐blue PVK‐TF is a promising MOS for hole‐transporting and host materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5221–5229, 2009     

Dithieno[2,3‐d:2',3'‐d']benzo[1,2‐b:4,5‐b']dithiophene (DTBDAT)‐based copolymers for high‐performance organic solar cells

P(BDT‐TCNT) and P(DTBDAT‐TCNT) , which has an extended conjugation length, were designed and synthesized for applications in organic solar cell (OSCs). The solution absorption maxima of P(DTBDAT‐TCNT) with the extended conjugation were red‐shifted by 5–15 nm compared with those of P(BDT‐TCNT) . The optical band gaps and highest occupied molecular orbital (HOMO) energy levels of both P(BDT‐TCNT) and P(DTBDAT‐TCNT) were similar. The structure properties of thin films of these materials were characterized using grazing‐incidence wide‐angle X‐ray scattering and tapping‐mode atomic force microscopy, and charge carrier mobilities were characterized using the space‐charge limited current method. OSCs were formed using [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) as the electron acceptor and 3% diphenylether as additive suppress aggregation. OSCs with P(BDT‐TCNT) as the electron donor exhibited a power conversion efficiency (PCE) of 4.10% with a short‐circuit current density of J_SC = 9.06 mA/cm², an open‐circuit voltage of V_OC = 0.77 V, and a fill factor of FF = 0.58. OSCs formed using P(DTBDAT‐TCNT) as the electron donor layer exhibited a PCE of 5.83% with J_SC = 12.2 mA/cm², V_OC = 0.77 V, and FF = 0.62. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3182–3192     

Polycyclic arene‐based D–A polyimide electrets for high‐performance n‐type organic field effect transistor memory devices

We report the memory characteristics of n‐type N,N′‐bis(2‐phenylethyl)‐perylene‐3,4:9,10‐tetracarboxylic diimide‐based organic field‐effect transistors (OFET) using a series of donor–acceptor (D–A) polyimide electrets of poly[4,4′‐diamino‐4″‐methyltriphenylamine‐hexafluoroisopropylidenediphthal imide] ( PI(AMTPA‐6FDA) ), poly[N,N‐bis‐(4‐aminophenyl)‐aminonaphthalene‐hexafluoroisopropylidenediphthalimide] ( PI(APAN‐6FDA) ), and poly[N,N‐bis‐(4‐aminophenyl)‐aminopyrene‐hexafluoroisopropylidenediphthalimide] ( PI(APAP‐6FDA) ). Among the polymer electrets, the OFET memory device based on PI(APAP‐6FDA) exhibits the largest memory window of 40.63 V and the best charge retention ability (maintained for over 10⁴ s with the ON/OFF current ratio about 10³) due to introducing polycyclic arene functionality of pyrene into the electron donating moiety. With the excellent carrier delocalization, pyrene successfully enhanced the charge storage ability and sustained the CT complex. Besides, PI(APAP‐6FDA)‐based OFET memory also performed well in the write‐read‐erase‐read tests for over 100 cycles. Our finding may provide a new approach for the preparation of high performance nonvolatile OFET memories with electrets of D–A polyimide systems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 139–147     

Synthesis of medium‐bandgap π‐Conjugated polymers based on isomers of 5‐Alkylphenanthridin‐6(5H)‐one and 6‐Alkoxylphenanthridine

Two novel dibromo monomers consisting of the isomers of 5‐alkylphenanthridin‐6(5H)‐one (PN) and 6‐alkoxylphenanthridine (PO) were synthesized through alkylation of the precursor 3,8‐dibromophenanthrindi‐6(5H)‐one, where the molecular structures were confirmed by NMR spectroscopy. The medium bandgap conjugated polymers PDBTPN and PDBTPO were constructed by utilizing such two isomers PN and PO as the electron‐donating units and dithiophenebenzo[2,1,3]diathiazole as the electron‐accepting unit. The resulting polymers exhibited analogous absorption profiles with optical bandgap of 1.90 eV, while PDBTPO showed slightly higher absorption coefficiency. Cyclic voltammetry measurements revealed that these polymers had relatively deep highest occupied molecular orbital levels of about ?5.70 eV. Polymer solar cells based on such two polymers showed relatively high open‐circuit voltage of about 0.90 V. All devices exhibited moderate performances with the best power conversion efficiency of 3.77% achieved based on PDBTPO. Devices based on PDBTPO showed slightly higher power conversion efficiency than those based on PDBTPN, which can be ascribed to higher hole mobility and more favorable film morphology of the former. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2119–2127     

Influence of molecular weight on the short‐channel effect in polymer‐based field‐effect transistors

In this study, we demonstrate how the intrinsic properties of a polymer can influence the electrical characteristics of organic field‐effect transistors (OFETs). OFETs fabricated with three batches of poly[2‐methoxy,5‐(3′,7′‐dimethyl‐octyloxy)]‐p‐phenylene vinylene (MDMO‐PPV) were investigated. The properties of the polymers were initially investigated using Fourier transform infrared spectroscopy (FTIR), impedance spectroscopy (IS), gel permeation chromotography (GPC), and cyclic voltammetry (CV), respectively. The structure and purity of the polymer batches were found to be very comparable, but the molecular weight (M_n and M_w) and polydispersity (PDI = M_w/M_n), varied between the samples and the HOMO and LUMO levels of the polymers were found to depend on the molecular weight properties. OFETs were then fabricated with the polymers and electrically characterized. It was observed that the channel current and the field‐effect mobility increase with increasing polymer molecular weight. The output characteristics of the transistors, on the other hand, were found to depend on the PDI of the polymer. Saturation of the channel current occurs at higher source–drain voltages and short‐channel behavior was observed to start at longer channel lengths for polymers with a higher PDI. This behavior is observed to be thickness dependent, and the short‐channel behavior was more pronounced for thicker MDMO‐PPV films. These results are explained in terms of influences of chain packing and ordering and high bulk currents on the FET output and transistor parameters. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 117–124, 2012     

End‐group effect on physical aging and polymer properties for poly(ether sulfones)

The physical aging properties of amorphous thermoplastics having various terminal groups were investigated with creep recovery and linear dilatometry. The structure of the chain end groups affected physical aging at lower molecular weights; however, above the critical molecular weight for entanglements the end‐group effect on aging diminished. Experimental densities and glass‐transition temperatures were also end‐group dependent. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2850–2860, 2003     

Poly(vinylpyrrolidone)‐based films grown on copper surfaces

The influence of molecular weight and the amount of the poly(vinylpyrrolidone) (PVP) on the growth of poly(vinylpyrrolidone)–based films on copper surfaces was studied by electrochemical, infrared and electronic spectroscopy, and thermogravimetric methods. Complex polymer/metal ions were deposited onto a copper surface, as the result of the electrochemically generated reaction of copper cations with PVP and SCN^?, in sulfuric acid media. Spontaneous film growth on copper surfaces was generated and characterized as a Cu(II)/PVP/SCN^? complex. Infrared spectra and thermal gravimetric curves of the films generated at + 0.7 V were compared with the chemically synthesized complex, and show the same patterns. The oxidation process can be described as: Cu(0)→Cu(I) and Cu(I)→Cu(II), and the copper complex formed at more positive potentials was characterized as Cu(II)/PVP/SCN^?, with copper bonded to the oxygen atom of PVP and thiocyanate ligand N‐linked. This study focuses on the complex formation on a copper surface in acid media and its characterization through electrochemical and spontaneously generated reactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2206–2214, 2009     

Effect of precursor chain‐length on the formation and stability of poly(ethylene glycol)‐based supramolecular star polymers

A homologous series of guanosine end‐functionalized poly(ethylene glycol)s have been prepared, and their assembly–disassembly behavior in the presence of potassium cations has been systematically examined upon changing the concentration, temperature, nature of solvent, amount of cation, and type of anion using ¹H‐NMR, UV/Vis, and circular dichroism spectroscopy. The results revealed a strong dependence of the assembly formation, and the stability of the formed supramolecular ensemble on the chain‐length of the assembly precursor. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of diblock copolymers containing poly(N‐vinylcarbazole) by reversible addition‐fragmentation chain transfer polymerization

The reversible addition‐fragmentation chain transfer (RAFT) polymerization of N‐vinylcarbazole (NVK) mediated by macromolecular xanthates was used to prepare three types of block copolymers containing poly(N‐vinylcarbazole) (PVK). Using a poly(ethylene glycol) monomethyl ether based xanthate ( PEG‐X ), the RAFT polymerization of NVK proceeded in a controlled way to afford a series of PEG‐b‐PVK with different PVK chain lengths. Successive RAFT polymerization of NVK and vinyl acetate (VAc) with a small molecule xanthate ( X1 ) as the chain transfer agent was tested to prepare PVK‐b‐PVAc. Though both monomers can be homopolymerized in a controlled manner with this xanthate, only by polymerizing NVK first could give well‐defined block copolymers. The xanthate groups in the end of PVK could be removed by radical‐induced reduction using tributylstannane, and PVK‐b‐PVA was obtained by further hydrolysis of PVK‐b‐PVAc under basic conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and thermal behavior of poly(ethylene oxide) poly(N‐substituted urethane)

Poly(N‐substituted urethane)s with an alkyl or ligo(ethylene oxide) monomethyl ether side chain were synthesized by the reaction operating in the following two‐step process: first, by metalation of the starting polymer with potassium tertiary butoxide (t‐BuOK) and then by treatment of the obtained urethane polyanion with tosylate in dimethyl sulfoxide. The thermal properties of poly(ethylene oxide) poly(N‐substituted urethane) (N‐sub PEOPU) were investigated in view of the N‐substitution degree and properties of the substituent. The chemical structures were characterized by Fourier transform infrared, ¹H NMR, and ¹³C NMR spectroscopies. DSC and thermogravimetric analysis (TGA) were used to investigate the thermal properties of N‐sub PEOPUs. As the degree of N‐methylation increased, the glass‐transition temperature (T_g) of the N‐sub PEOPUs linearly decreased from 6 to ?29 °C, and the weight‐loss temperature of 5% (T) from TGA in air increased from 278 to 360 °C. In the fully N‐substituted PEOPUs, the behavior of the thermal decomposition of the PEOPU that was processed in two stages was changed to one‐step decomposition in the temperature range of 360–440 °C. The T_g was shifted to a lower temperature with an increasing length of the substituent in N‐sub PEOPU. Improvement of the thermal stability by N‐substitution was more significant in N‐alkyl PEOPU than in N‐ethoxylate PEOPU. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4129–4138, 2001     

Correlation of charge transport with structural order in highly ordered melt‐crystallized poly(3‐hexylthiophene) thin films

A series of well‐defined poly(3‐hexylthiophene)s (P3HT) of different molecular weight (MW) and high regioregularity was investigated for charge transport properties in as‐cast and melt‐crystallized films. The semicrystalline structure of the P3HT was characterized by X‐ray scattering and Atomic force microscopy. Crystallization by cooling from the melt led to a substantial increase in crystallinity and a stronger alignment of the crystals in comparison to as‐cast films. The increase in crystallinity went along with an increase in hole mobility of up to an order of magnitude as measured by the space charge limited current method. Additionally, the hole mobility depended on the long period of P3HT lamellae and consequently on the MW. In compliance with the long period, the charge carrier mobility first increased with the MW before decreasing again at the onset of chain folding. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 943–951     

High performance polymer field‐effect transistors based on polythiophene derivative with conjugated side chain

Poly(3‐[2‐(5‐hexyl‐2‐thienyl) ethenyl]‐2,2′‐bithiophene) ( P2 , see Scheme 1 ) with conjugated thienylvinyl side chain was synthesized by copolymerization of the thiophene units with and without conjugated side chain with Pd‐catalyzed Stille coupling method. For comparison, P1 with the hexyl side chain instead of conjugated side chain was also synthesized. P2 film shows broad absorption in the visible region with absorption edge at about 700 nm. The solution‐processed polymer field‐effect transistors were fabricated and characterized with bottom gate/top contact geometry. The organic field‐effect transistors (OFET) based on P2 showed an average hole mobility of about 0.034 cm²/Vs (the highest value reached 0.061 cm²/Vs) upon annealing at about 180 °C for 30 min, with a threshold voltage of ?1.15 V and an on/off ratio of 10⁴ with n‐octadecyltrichlorosilane (OTS) modified SiO₂ substrate. In comparison, the OFET based on P1 displayed a hole mobility of 8.9 × 10^–4 cm²/Vs and an on/off ratio of 10⁴ with OTS modified SiO₂ substrate. The results indicate that the polythiophene derivative with conjugated thienylvinyl side chain is a promising polymer for the application in polymer field‐effect transistors. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5304–5312, 2009     

A two‐dimensional copper(II) coordination polymer based on 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid

Single‐crystal X‐ray diffraction analysis of poly[bis(μ₂‐5‐carboxy‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:O⁵)copper(II)], [Cu(C₈H₉N₂O₄)₂)]_n, indicates that one carboxylic acid group of the 2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃PDI) ligand is deprotonated. The resulting H₂PDI⁻ anion, acting as a bridge, connects the Cu^II cations to form a two‐dimensional (4,4)‐connected layer. Adjacent layers are further linked through interlayer hydrogen‐bond interactions, resulting in a three‐dimensional supramolecular structure.     

Growing poly(N‐vinylcarbazole) from the surface of graphene oxide via RAFT polymerization

A new approach on usage of S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate (DDAT)‐covalently functionalized graphene oxide (GO) as reversible addition fragmentation chain transfer (RAFT) agent for growing of poly(N‐vinylcarbazole) (PVK) directly from the surface of GO was described. The PVK polymer covalently grafted onto GO has M_n of 8.05 × 10³, and a polydispersity of 1.43. The resulting material PVK‐GO shows a good solubility in organic solvents when compared to GO, and a significant energy bandgap of ～2.49 eV. Bistable electrical switching and nonvolatile rewritable memory effect, with a turn‐on voltage of about ?1.7 V and an ON/OFF state current ratio in excess of 10³, are demonstrated in the Al/PVK‐GO/ITO structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A new two‐dimensional manganese(II) coordination polymer based on thiophene‐3,4‐dicarboxylic acid

A novel manganese coordination polymer, poly[(μ₅‐thiophene‐3,4‐dicarboxylato)manganese(II)], [Mn(C₆H₂O₄S)]_n, was synthesized hydrothermally using 3,4‐thiophenedicarboxylate (3,4‐tdc²⁻) as the organic linker. The asymmetric unit of the complex contains an Mn²⁺ cation and one half of a deprotonated 3,4‐tdc²⁻ anion, both residing on a twofold axis. Each Mn²⁺ centre is six‐coordinated by O atoms of bridging/chelating carboxylate groups from five 3,4‐tdc²⁻ anions, forming a slightly distorted octahedron. The Mn²⁺ centres are bridged by 3,4‐tdc²⁻ anions to give an infinite two‐dimensional layer which incorporates one‐dimensional Mn–O gridlike chains, and in which the 3,4‐tdc²⁻ anion adopts a novel hexadentate chelating and μ₅‐bridging coordination mode. The fully deprotonated 3,4‐tdc²⁻ anion exhibits unexpected efficiency as a ligand towards the Mn²⁺ centres, which it coordinates through all of its carboxylate O atoms to provide the novel coordination mode. The IR spectrum of the complex is also reported.