A UV‐Cleavable Bottlebrush Polymer with o‐Nitrobenzyl‐Linked Side Chains

An ultraviolet (UV)‐cleavable bottlebrush polymer is synthesized using the “grafting‐onto” strategy by combining living radical polymerization and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). In this approach, reversible addition‐fragmentation chain transfer polymerization is used to prepare a poly(methylacrylate) backbone with azide side groups, while atom transfer radical polymerization is employed to prepare polystyrene (PS) side chains end‐functionalized with o‐nitrobenzyl (UV‐cleavable) propargyl groups. CuAAC is then used to graft PS side chains onto the polymer backbone, producing the corresponding bottlebrush polymers with UV‐cleavable PS side chains. The formation of the bottlebrush polymer is characterized by ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatography (GPC), and Fourier transform infrared spectroscopy. The cleavage behavior of the bottlebrush polymer is monitored in tetrahydrofuran solution under UV irradiation by GPC and viscosity measurements.

     

A reduction sensitive cascade biodegradable linear polymer

Cascade degradable linear polymers offer the potential for a high degree of control over the degradation process. They comprise a backbone that is stable in the presence of an end cap, but upon removal of the end cap a cascade of intramolecular reactions is initiated that leads of depolymerization of the polymer backbone. Reported here is a new polymer backbone based on N,N′‐dimethylethylenediamine and 2‐mercaptoethanol linked by carbamates and thiocarbamates. A disulfide end cap was incorporated such that its cleavage under reducing conditions revealed the thiol of 2‐mercaptoethanol, leading to alternating cyclizations of the 2‐mercaptoethanol and N,N′‐dimethylethylenediamine moieties to provide 1,3‐oxathiolan‐2‐one and N,N′‐dimethylimidazolidinone, respectively. The degradation was monitored by ¹H NMR and GPC. The expected products were observed, along with a portion of nondegradable polymer that was likely cyclic species. Overall, the results demonstrate the promise of this new class of polymers to degrade selectively in reducing environments such as hypoxic tumor tissue or the intracellular compartments of cells. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3977–3985, 2010     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Conformation of ionizable poly Para phenylene ethynylene in dilute solutions

The conformation of dinonyl poly para phenylene ethynylenes (PPEs) with carboxylate side chains, equilibrated in solvents of different quality have been studied using molecular dynamics simulations. PPEs are of interest because of their tunable electro‐optical properties, chemical diversity, and functionality which are essential in wide range of applications. The polymer conformation determines the conjugation length and their assembly mode and affects electro‐optical properties which are critical in current and potential uses. This study investigates the effect of carboxylate fraction on PPEs side chains on the conformation of chains in the dilute limit, in solvents of different quality. The dinonyl PPE chains are modeled atomistically, where the solvents are modeled both implicitly and explicitly. Dinonyl PPEs maintained a stretched out conformation up to a carboxylate fraction f of 0.7 in all solvents studied. The nonyl side chains are extended and oriented away from the PPE backbone in toluene and in implicit good solvent, whereas in water and implicit poor solvent, the nonyl side chains are collapsed toward the PPE backbone. Rotation around the aromatic ring is fast and no long range correlations are seen within the backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 582–588     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

Graft copolymers prepared by ethoxylation of polyamide 12 and poly(ethylene-co-vinyl alcohol)

Graft copolymers consisting of polyamide 12 or poly(ethylene-co-vinyl alcohol) as backbone polymers and side chains of poly(ethylene oxide) have been synthesized. The amide and hydroxyl groups of the backbone polymers were used as initiation sites for the polymerization of ethylene oxide (EO). Potassium tert-butoxide was used for ionization of the active groups, and the polymerization of EO was carried out in dimethyl sulfoxide. The graft copolymers were characterized with respect to molecular weight and composition using elemental analysis, ¹H-NMR, gel permeation chromatography, and FTIR. The size of the side chains varied between 300 and 1000 g/mol. Thermal properties were examined by DSC. The graft copolymers showed increasing crystallinity and increasing melt temperature with increasing molecular weight of the side chains. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 803–811, 1998     

Side chain length affects backbone dynamics in poly(3‐alkylthiophene)s

Charge transport in conjugated polymers may be governed not only by the static microstructure but also fluctuations of backbone segments. Using molecular dynamics simulations, we predict the role of side chains in the backbone dynamics for regiorandom poly(3‐alkylthiophene‐2,5‐diyl)s (P3ATs). We show that the backbone of poly(3‐dodecylthiophene‐2‐5‐diyl) (P3DDT) moves faster than that of poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) as a result of the faster motion of the longer side chains. To verify our predictions, we investigated the structures and dynamics of regiorandom P3ATs with neutron scattering and solid state NMR. Measurements of spin‐lattice relaxations (T₁) using NMR support our prediction of faster motion for side chain atoms that are farther away from the backbone. Using small‐angle neutron scattering (SANS), we confirmed that regiorandom P3ATs are amorphous at about 300 K, although microphase separation between the side chains and backbones is apparent. Furthermore, quasi‐elastic neutron scattering (QENS) reveals that thiophene backbone motion is enhanced as the side chain length increases from hexyl to dodecyl. The faster motion of longer side chains leads to faster backbone dynamics, which in turn may affect charge transport for conjugated polymers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1193–1202     

Multisensitive polymers based on 2‐vinylpyridine and N‐isopropylacrylamide *

Poly(2‐vinylpyridine) (P2VP) containing functionalized end groups was synthesized using nitroxyl‐mediated radical polymerization with a hydroxy‐functionalized stable free radical. It was shown that P2VP could be synthesized with variable molar masses and low polydispersities. The transformation of the hydroxy groups to an acrylic ester led to the formation of macromonomers. A free‐radical copolymerization of these macromonomers with N‐isopropylacrylamide gave a graft copolymer with a poly(N‐ispopropylacrylamide) backbone and P2VP side chains. Polymers containing different amounts of the monomers were synthesized. It was possible to vary both the amount of P2VP side chains at a constant chain length of the macromonomer and the chain length at a nearly constant chain number. The behavior of the multifunctional macromolecules at different temperatures and pH values was investigated using dynamic light scattering and DSC. The macromolecules were found to retain the specific properties of the homopolymers. The hydrodynamic radii of the synthesized graft copolymers were both dependent on the temperature and pH value. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3797–3804, 2001     

Synthesis of norbornenes containing cationic mono‐ and di(cyclopentadienyliron)arene complexes and their ring‐opening metathesis polymerization

A number of classes of polynorbornenes containing cationic iron moieties within their side chains were prepared via ring‐opening metathesis polymerization with a ruthenium‐based catalyst. The iron‐containing polymers displayed excellent solubility in polar organic solvents. The weight‐average molecular weights of these polymeric materials were estimated to be in the range of 18,000–48,000. Thermogravimetric analysis of these polymers showed two distinct weight losses. The first weight loss was in the range of 204–260 °C and was due to the loss of the metallic moieties, whereas the second weight loss was observed at 368–512 °C and was due to the degradation of the polymer backbone. Cyclic voltammetry studies of the iron‐containing polymers showed that the 18 e^? cationic iron centers underwent a reduction to give the neutral 19 e^? complexes at half‐wave potential (E_1/2) = ?1.105 V. Photolysis of the metallated polymers led to the isolation of the norbornene polymers in very good yields. Differential scanning calorimetry studies showed a sharp increase in the glass‐transition temperatures up to 91 °C when rigid aromatic side chains were incorporated into the norbornene polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3053–3070, 2006     

Poly(oxanorbornenedicarboximide)s dendronized with amphiphilic poly(alkyl ether) dendrons

Attaching dendritically branched side chains to each repeat unit of a linear polymer produces molecular building blocks of nanometer‐sized dimensions called dendronized polymers. The structure of these complex molecular architectures is highly tunable and, therefore, of interest for a wide range of potential applications. The first examples of dendronized polymers prepared by living ring‐opening metathesis polymerization of oxanorbornenedicarboximide macromonomers with poly(alkyl ether) dendrons are reported. Small‐angle X‐ray scattering experiments on bulk samples confirm that the diameter of the individual cylindrical polymers can be tailored by the choice of dendron generation or the length of the hydrocarbon peripheral group. Analysis of the SAXS data based on a core‐shell model indicates that although the diameter of the cylinder increases with generation, the size of the core does not change; this suggests that these dendrons only loosely encapsulate the polymer backbone. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3221–3239     

Elastic behavior of ring polymer chains

In this article, the conformational properties and elastic behaviors of ring polymers in the process of tensile elongation are investigated with the Monte Carlo method and the bond fluctuation model. The ratio of the mean‐square diameter <d²> to the mean‐square radius of gyration <S²> increases with the elongation ratio, λ, and the instantaneous shape of ring polymers is more symmetric than that of linear chains in the process of tensile elongation. Here <d²> for ring polymers rather than the mean‐square end‐to‐end distance <R²> for linear polymers is defined as the average of squared distances between two segments separated by N/2 bonds, where N represents the total number of bonds. Local quantities, that is, the mean‐square bond length <b²> and the mean bond angle <θ> increase with λ, especially for short ring chains. The <d²> and <S²> have the same relationship with the chain length, N, that is, <d²> ～ N^1.130±0.020 and <S²> ～ N^1.160±0.013 for a different λ. Some thermodynamics properties are also addressed here. The average energy per bond <U> decreases with λ and the average Helmholtz free energy and elastic force f increase with λ, especially for short ring chains. Comparisons with linear chains are also made. These investigations may provide insight into the elastic behaviors of ring polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 223–232, 2005     

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Donor–acceptor (D–A) conjugated copolymers are one of known classes of organic optoelectronic materials and have been well developed. However, less attention has been paid on acceptor–acceptor (A–A) conjugated analogs. In this work, two types of A–A conjugated copolymers, namely P1‐Cn and P2‐Cn (n is the carbon number of their alkyl side chains), were designed and synthesized based on perylenediimide ( PDI ) and 2,1,3‐benzothiadiazole ( BT ). Different from P1‐Cn , P2‐Cn polymers have additional acetylene π‐spacers between PDI and BT and thus hold a more planar backbone configuration. Property studies revealed that P2‐Cn polymers possess a much red‐extended UV–vis absorption spectrum, stronger π–π interchain interactions, and one‐order larger electron mobility in their neat film state than P1‐Cn . However, all‐polymer solar cells using P1‐Cn as acceptor component and poly(3‐hexyl thiophene) or poly(2,7‐(9,9‐didodecyl‐fluoene)‐alt?5,5′‐(4,7‐dithienyl‐2‐yl‐2,1,3‐benzothiadiazole) as donor component exhibited much better performance than those based on P2‐Cn . Apart from their backbone chemical structure, the side chains were found to have little influence on the photophysical, electrochemical, and photovoltaic properties for both P1‐Cn and P2‐Cn polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1200–1215     

Effects of alkyl side chains positioning and presence of fused aromatic units in the backbone of low‐bandgap diketopyrrolopyrrole copolymers on the optoelectronic properties of organic solar cells

The systematic optimization of the chemical structure of low‐bandgap (LBG) donor‐acceptor polymeric semiconductors is a challenging task for which accurate guidelines are yet to be determined. Several different structural and molecular parameters are crucial ingredients for obtaining LBG polymers that simultaneously possess high power conversion efficiencies, good processability in common organic solvents, and enhanced stability in organic photovoltaic devices. In this work, we present an extensive structure–optoelectronic properties–solar cell performance study on the emerging class of diketopyrrolopyrrole‐based LBG polymers. In particular, we investigate alkyl side chain positioning by introducing linear alkyl side chains into two different positions (α‐ and β‐), and the distance of the electron rich and electron deficient monomers within the repeat units of the polymer chain. We demonstrate that anchoring linear alkyl side chains to the α‐positions and introducing fused moieties into the polymer backbone, can be beneficial toward maintaining photocurrents similar to the unsubstituted derivative, and concurrently exhibit better processabiliy in common organic solvents. These results can provide a design rationale towards further optimization of semiconducting polymers. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 138–146     

In situ monitoring the thermal degradation of PCPDTBT low band gap polymers with varying alkyl side‐chain patterns

The degradation pattern of a series of low band gap PCPDTBT polymers under thermal stress is investigated by in situ UV–vis and FT‐IR techniques combined with thermal degradation analysis. Thermogravimetric analysis is used to predetermine the decomposition intervals, revealing that thermolysis occurs in two stages. TG‐TD‐GC/MS shows that loss of the alkyl side chains predominantly happens within the first temperature regime and degradation of the polymer backbone occurs thereafter. UV–vis spectroscopy is used to monitor the evolution of the optical properties upon heating, reflecting the thermal stability of the conjugated backbone, whereas FT‐IR spectroscopy is applied to evaluate the chemical changes under thermal stress, with an emphasis on the polymer periphery. The influence of the side chains and possible defects, dependent on the synthesis protocol applied, on the thermal stability of the final polymers is discussed and is related to the application of said materials in organic photovoltaics. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4912–4922     

Poly(perylene‐alt‐phenyleneethynylene)s with multiple pendant ester groups in various lengths: Synthesis,photophysics and selective hydrolysis

Five fluorescence polymers with poly(perylene‐alt‐phenyleneethynylene)s (PPPEs) backbone and multiple side chains containing ester‐groups were synthesized via Sonogashira coupling reaction. These polymers were soluble in common organic solvents to form red‐orange solution. The polymer powders had dark red color. The absorption/emission spectra of these polymers were similar, with absorption bands between 300 and 600 nm and an emission peak between 520 and 700 nm. Furthermore, the ester groups of the side chains were partially or completely hydrolyzed, resulting in the fluorescence PPPEs with tunable density of carboxylic acid functional groups on the polymer chains as interaction/reaction sites for further applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1880–1886     

A series of novel side chain liquid crystalline polysiloxanes containing cyano‐ and cholesterol‐terminated substituents: Where will the structure‐dependence of terminal behavior of the side chain reappear?

A series of polysiloxane side chain liquid crystal polymers with strong polarity cyano substitution‐terminated achiral side chains and cholesterol‐terminated chiral side chains was successfully synthesized via thiol‐ene click chemistry. ¹H‐NMR, FT‐IR, and thermogravimetric analysis were used to confirm their chemical structures and thermal stabilities. Their phase transition behaviors and phase structures were systematically investigated by a combination of analysis methods such as differential scanning calorimetry, polarized optical microscopy, and X‐ray. Results revealed that attributing to the decisive role of the polarity interaction, all the polymers only developed a monolayer interdigitated SmA phase in which the period arrangement was determined by the cyano‐terminated side chains, the increased content of cholesterol‐terminated chiral side chains (X_chol) just expanded the distance between neighboring molecules within a layer. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1765–1772     

Anionic polymerization of N,N‐dialkylacrylamides containing alkoxysilyl groups in the presence of Lewis acids

With Ph₂CHK as an initiator, the anionic polymerization of N‐propyl‐N‐(3‐triisopropoxysilylpropyl)acrylamide ( 4 ) and N‐propyl‐N‐(3‐triethoxysilylpropyl)acryl‐amide generated polymers with predicted molecular weights and narrow molecular weight distributions (MWDs) in the presence of Et₂Zn or Et₃B; however, the resulting polymers obtained in the absence of such Lewis acids had very broad MWDs. The results were ascribed to the coordination of the propagating anionic end to a relatively weak Lewis acid, in which the activity of the end anion was appropriately controlled for moderate polymerization without side reactions. A well‐defined diblock copolymer of 4 and N,N‐diethylacrylamide was also prepared with the binary initiating system of Ph₂CHK and Et₂Zn, whereas no such block copolymer was prepared by polymerization initiated with 1,1‐diphenyl‐3‐methylpentyllithium, as the propagating anion together with the lithium ion reacted with alkoxysilyl side groups on the poly( 4 ) backbone to produce grafted polymers with high molecular weights. The hydrolysis of the alkoxysilyl side groups of poly( 4 ) in acidic water yielded an insoluble gel. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2754‐2764, 2005     

Synthesis and properties of polyimides derived from 9,10‐dialkyloxy‐1,2,3,4,5,6,7,8‐octahydro‐2,3,6,7‐anthracenetetracarboxylic 2,3:6,7‐dianhydrides

A series of new polyimides containing alicyclic units and alkyloxy side chains were prepared from 9,10‐dialkyloxy‐1,2,3,4,5,6,7,8‐octahydro‐2,3,6,7‐anthracenetetracarboxylic 2,3:6,7‐dianhydrides and various aromatic diamines. Their physical properties and structures were investigated. Polymers were obtained with inherent viscosities of 0.24–0.53 dL/g. In comparison with the aromatic polyimides, most polymers were readily soluble in common organic solvent such as N‐methylpyrrolidone and m‐cresol. These polymers had glass‐transition temperatures between 111 and 296 °C depending on the structure of the repeating unit and 10% weight‐loss temperatures of 418–477 °C in nitrogen. Wide‐angle X‐ray diffractometry for as‐polymerized samples revealed very low crystallinity and layered structures, which were better developed in the polymers with longer side chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1764–1774, 2002     

Morphological studies of blends of conjugated polymers and acceptor molecules using langevin dynamics simulations

We use coarse‐grained Langevin dynamics simulations of blends of generic conjugated polymers and acceptor molecules to show how architecture (e.g., side chains, backbone flexibility of oligomers) and the pair‐wise interactions between the constituents of the blend affect morphology and phase transition. Alkyl side chains on the conjugated oligomer backbones shift the liquid crystal (LC) transition temperature from that of bare conjugated backbones and the direction of the shift depends on backbone–backbone interactions. Rigid backbones and constrained side chains cause a layer‐by‐layer morphology of conjugated polymers and amorphous acceptors, whereas flexible backbones and unconstrained side chains facilitate highly ordered acceptor arrangement. Strong backbone–backbone attraction shifts LC transition to higher temperatures than weak backbone–backbone attraction, and strong acceptor–acceptor attraction increases acceptor aggregation. Pure macro‐phase separated domains form when all pair‐wise interactions in the blend are strongly attractive, whereas interconnected domains form at intermediate acceptor–acceptor attraction and strong polymer–polymer attractions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Association of hydrophobically α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) in water

The α,ω‐end‐capped poly(2‐methyl‐2‐oxazoline) (C_n‐POXZ‐C_n) have been synthesized by a one‐pot process using cationic ring‐opening polymerization with an appropriate initiator and terminating agent. The polymers bearing different alkyl groups C₁₂ and C₁₈ have molecular weight in the range of 2.4 × 10³ to 14 × 10³ with a small polydispersity index. The solution behavior of the free chains has been analyzed in a nonselective solvent, dichloromethane, by small‐angle neutron scattering and dynamic light scattering. These amphiphilic polymers associate in water to form flower‐like micellar structures. Critical micelle concentrations, investigated by fluorescence technique, are in the range of 0.03–0.5 g L^?1 and are dependent on the hydrophilic/lipophilic balance. The structural properties of the aggregates have also been investigated by viscometry. Intrinsic viscosities of these polymers are in the same range as that of the precursors poly(2‐methyl‐2‐oxazoline) (POXZ) and mono‐functionalized polymers. Large viscosity increase corresponding to intermicellar bridging was observed in the vicinity of the micelle overlap concentration. Addition of hydroxypropyl β‐cyclodextrin (HβCD) has dissociated the aggregates and the intrinsic viscosities of the HβCD‐end‐capped chains have become comparable with the ones of POXZ precursor chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2477–2485, 2010