Controllable glycosylation of polyphosphazene via radical thiol–yne click chemistry

We describe a versatile approach to synthesize glycosylated polyphosphazenes with controllable density of glycosyl groups. These glycopolymers have been synthesized by the nucleophilic substitution of poly(dichlorophosphazene) with propargylamine and subsequent “thiol–yne” click reaction between poly[di(propargylamine)phosphazene] and 2,3,4,6‐tetra‐O‐acetyl‐1‐thio‐β‐D ‐glucopyranose (SH‐GlcAc₄). The polymers were characterized with FTIR and ¹H NMR. We found that the high steric hindrance of SH‐GlcAc₄ plays a key role in the overall reaction process, and ～55% of the alkyne groups participate in the “thiol–yne” click reaction. About 8% of the alkyne groups convert to alkene groups at the end of click reaction. The substitution of alkyne/alkane mixture was conducted to reduce the alkyne density in the side groups of polyphosphazenes and minimize the influences of this steric effect. Mixed‐substituent polyphosphazene was synthesized with 2:3 ratio of alkyne and alkane. In this case, almost no alkyne group remains after the “thiol–yne” click reaction, and thus the glycosylated polyphosphazene is able to form into micelles through self‐assembly process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions as a route to well‐defined mono and bis end‐functionalized poly(N‐isopropylacrylamide)

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used as a facile and quantitative method for modifying end‐groups on an N‐isopropylacrylamide (NIPAm) homopolymer. A well‐defined precursor of polyNIPAm (PNIPAm) was prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization in DMF at 70 °C using the 1‐cyano‐1‐methylethyl dithiobenzoate/2,2′‐azobis(2‐methylpropionitrile) chain transfer agent/initiator combination yielding a homopolymer with an absolute molecular weight of 5880 and polydispersity index of 1.18. The dithiobenzoate end‐groups were modified in a one‐pot process via primary amine cleavage followed by phosphine‐mediated nucleophilic thiol‐ene click reactions with either allyl methacrylate or propargyl acrylate yielding ene and yne terminal PNIPAm homopolymers quantitatively. The ene and yne groups were then modified, quantitatively as determined by ¹H NMR spectroscopy, via radical thiol‐ene and radical thiol‐yne reactions with three representative commercially available thiols yielding the mono and bis end functional NIPAm homopolymers. This is the first time such sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used in polymer synthesis/end‐group modification. The lower critical solution temperatures (LCST) were then determined for all PNIPAm homopolymers using a combination of optical measurements and dynamic light scattering. It is shown that the LCST varies depending on the chemical nature of the end‐groups with measured values lying in the range 26–35 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3544–3557, 2009     

A novel polymerization approach via thiol‐yne addition

The ability of thiyl radicals to add to terminal unsaturations in an efficient way made them considered being one of the click reactions. Recently, thiol‐yne addition reactions have been used extensively for the synthesis of crosslinked networks and dendrimers and postpolymerization functionalization protocols. Herein, we report a novel step‐growth type reaction for highly functional linear polymers using a monoalkyne and dithiol compound. First, we investigated the model reaction between 1‐octyne and 1‐octanethiol as well as 1,4‐butanedithiol compounds, which were initiated via self‐, thermal‐, and UV‐initiation; the UV‐initiation was found to be the most efficient method and completed within 2‐h reaction time. The same conditions were applied for the polymerization of four different functional alkynes bearing different functional groups with two dithiol compounds. All polymerizations resulted in highly functional linear polymers with number averaged molecular weights ranging from 5 to 30 kDa, except for propargylic acid and its methyl ester, where only oligomers formed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Versatile functionalization of aromatic polysulfones via thiol‐ene click chemistry

A facile, efficient approach for preparation of functionalized aromatic polysulfones by postpolymerization modification with thiol‐ene click chemistry is described. The key synthetic strategy is to incorporate a pendant vinyl ether group into polysulfones as a reactive precursor with controlled degrees of functionalization. Synthetic utility of the pendant alkenyl group is demonstrated by generating diverse polymer derivatives using thiol‐ene functionalization including glycosylated polysulfone. The highly reactive alkene platform in the polymer affords convenient, metal‐free, and azide‐free click transformations to create diverse ranges of new functionalized polysulfones that could be applied in various applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3237–3243     

Exploring thiol‐yne based monomers as low cytotoxic building blocks for radical photopolymerization

The last decade has seen a remarkable interest in the development of biocompatible monomers for the realization of patient specific medical devices by means of UV‐based additive manufacturing technologies. This contribution deals with the synthesis and investigation of novel thiol‐yne based monomers with a focus on their biocompatibility and also the mechanical properties in their cured state. It could be successfully shown that propargyl and but‐1‐yne‐4‐yl ether derivatives have a significant lower cytotoxicity than the corresponding (meth)acrylates with similar backbones. Together with appropriate thiol monomers, these compounds show reactivities in the range of (meth)acrylates and almost quantitative triple bond conversions. A particular highlight is the investigation of the network properties of photo cured alkynyl ether/thiol resins by means of low field solid state nuclear magnetic resonance spectroscopy. Additionally, dynamic mechanical analysis of those polymers revealed that monomers containing rigid backbones lead to moduli and glass transition temperatures (T_g's), sufficiently high for the fabrication of medical devices by UV based additive manufacturing methods. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3484–3494     

Thiol‐yne Click Adamantane Monolithic Stationary Phase for Capillary Electrochromatography

A porous crosslinked organic polymer based on N‐acryloxysuccinimide (NAS) and ethylene dimethacrylate (EDMA) was prepared inside 75 µm i.d. fused silica capillary as functionalizable monolithic stationary phase for electrochromatographic applications. Succinimide groups on the monolith surface provide reactive sites able to react readily through standard electrophile‐nucleophile chemistry. Propargylamine was used to prepare alkyne functionalized poly(NAS‐co‐EDMA). Onto this thiol‐reactive polymer surface was grafted adamantane units via a photochemically‐driven addition reaction. Chemical characterization was performed in situ after each synthetic step by means of Raman spectroscopy and grafting kinetics was investigated to ensure quantitative grafting of 1‐adamantanethiol. The as‐designed monolithic stationary phase exhibited typical reversed‐phase separation mechanism as evidenced by the linear increase of the logarithm of retention factor of neutral aromatic solutes with the increase of the aqueous buffer content in the mobile phase.     

Silica/poly (N‐vinylimidazolium) nanospheres by combined RAFT polymerization and thiol‐ene click chemistry

We report a facile method that combined sol–gel reaction, reversible addition–fragmentation chain transfer (RAFT)/macromolecular design via interchange of the xanthates process and thiol‐ene click reaction to prepare monodisperse silica core‐poly(N‐vinylimidazole) (PVim) shell microspheres of 200 nm in average diameters. First, silica with C = C double bonds was prepared by the sol–gel reaction of 3‐(trimethoxysilyl)propyl methacrylates (MPS) with tetraethoxysilane in ethanol; SiO₂@PVim were subsequently prepared by grafting PVim chain (Mn = 9800 g/mol, polydispersity index = 1.22) to MPS‐SiO₂ via the thiol‐ene click chemisty. The obtained SiO₂@PVim microspheres show higher catalytic activity toward the hydrolysis of p‐nitrophenyl acetate compared with the PVim homopolymers. The as‐prepared composites have been characterized by scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis and Fourier transform infrared spectrometry analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Reactive Polymer Coatings: A General Route to Thiol‐ene and Thiol‐yne Click Reactions

Reactive polymer coatings were synthesized via chemical vapor deposition (CVD) polymerization process. These coatings decouple surface design from bulk properties of underlying materials and provide a facile and general route to support thiol‐ene and thiol‐yne reactions on a variety of substrate materials. Through the reported technique, surface functions can be activated through a simple design of thiol‐terminated molecules such as polyethylene glycols (PEGs) or peptides (GRGDYC), and the according biological functions were demonstrated in controlled and low‐fouling protein adsorptions as well as accurately manipulated cell attachments.     

Synthesis and postfunctionalization of well‐defined star polymers via “double” click chemistry

In this article, the synthesis and the functionalization of well‐defined, narrow polydispersity (polydispersity index < 1.2) star polymers via reversible addition‐fragmentation chain transfer polymerization is detailed. In this arm first approach, the initial synthesis of a poly(pentafluorophenyl acrylate) polymer, and subsequent, cross‐linking using bis‐acrylamide to prepare star polymers, has been achieved by reversible addition fragmentation chain transfer polymerization. These star polymers were functionalized using a variety of amino functional groups via nucleophilic substitution of pentafluorophenyl activated ester to yield star polymers with predesigned chemical functionality. This approach has allowed the synthesis of star glycopolymer using a very simple approach. Finally, the core of the stars was modified via thiol‐ene click chemistry reaction using fluorescein‐o‐acrylate and DyLigh 633 Maleimide. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Convenient Synthesis of Functionalized Bis‐ureidopyrimidinones Based on Thiol‐yne Reaction

The preparation of functionalized bis‐ureidopyrimidinones ( Bis‐UPy ) through the thiol‐yne reaction is described. Various Bis‐UPys with different functional groups were synthesized by using the readily available functionalized alkynes and UPy‐thiol to affirm the simplicity and versatility of the methodology.     

ABC type miktoarm star copolymers through combination of controlled polymerization techniques with thiol‐ene and azide‐alkyne click reactions

ABC type miktoarm star copolymer with polystyrene (PS), poly(ε‐caprolactone) (PCL) and poly(ethylene glycol) (PEG) arms was synthesized using controlled polymerization techniques in combination with thiol‐ene and copper catalyzed azide‐alyne “click” reactions (CuAAC) and characterized. For this purpose, 1‐(allyloxy)‐3‐azidopropan‐2‐ol was synthesized as the core component in a one‐step reaction with high yields (96%). Independently, ω‐thiol functionalized polystyrene (PS‐SH) was synthesized in a two‐step protocol with a very narrow molecular weight distribution. The bromo end function of PS obtained by atom transfer radical polymerization was first converted to xanthate function and then reacted with 1, 2‐ethandithiol to yield desired thiol functional polymer (PS‐SH). The obtained polymer was grafted onto the core by thiol‐ene click chemistry. In the following stage, ε‐caprolactone monomer was polymerized from the core by ring opening polymerization (ROP) using tin octoate as catalyst through hydroxyl groups to form the second arm. Finally, PEG‐acetylene, which was simply synthesized by the esterification of Me‐PEG and 5‐pentynoic acid, was clicked onto the core through azide groups present in the structure. The intermediates at various stages and the final miktoarm star copolymer were characterized by ¹H NMR, FTIR, and GPC measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of comb polymers via grafting‐onto macromolecules bearing pendant diene groups via the hetero‐Diels‐Alder‐RAFT click concept

Comb polymers were synthesized by the “grafting‐onto” method via a combination of Reversible Addition‐Fragmentation Chain Transfer (RAFT) polymerization and the hetero‐Diels‐Alder (HDA) cycloaddition. The HDA reactive monomer trans, trans‐hexa‐2,4‐dienylacrylate (ttHA) was copolymerized with styrene via the RAFT process. Crosslinking was minimized by decreasing the monomer concentration—whilst keeping monomer to polymer conversions low—resulting in reactive backbones with on average one reactive pendant diene groups for 10 styrene units. The HDA cycloaddition was performed between the diene functions of the copolymer and a poly(n‐butyl acrylate) (PnBA) prepared via RAFT polymerization with pyridin‐2‐yldithioformate, which can act as a dienophile. The coupling reactions were performed within 24 h at 50 °C and the grafting yield varies from 75% to 100%, depending on the number average molecular weight of the PnBA (3500 g mol^?1 < M_n < 13,000 g mol^?1) grafted chain and the reaction stoichiometry. The molecular weights of the grafted block copolymers range from 19,000 g mol^?1 to 58,000 g mol^?1 with polydispersities close to 1.25. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1773–1781, 2010     

High density cationic polymer brushes from combined “click chemistry” and RAFT‐mediated polymerization

A simple method for preparing cationic poly[(ar‐vinylbenzyl)trimethylammonium chloride)] [poly(VBTAC)] brushes was used by combined technology of “click chemistry” and reversible addition‐fragmentation chain transfer (RAFT) polymerization. Initially, silicon surfaces were modified with RAFT chain transfer agent by using a click reaction involving an azide‐modified silicon wafer and alkyne‐terminated 4‐cyanopentanoic acid dithiobenzoate (CPAD). A series of poly(VBTAC) brushes on silicon surface with different molecular weights, thicknesses, and grafting densities were then synthesized by RAFT‐mediated polymerization from the surface immobilized CPAD. The immobilization of CPAD on the silicon wafer and the subsequent polymer formation were characterized by X‐ray photoelectron spectroscopy, water contact angle measurements, grazing angle‐Fourier transform infrared spectroscopy, atomic force microscopy, and ellipsometry analysis. The addition of free CPAD was required for the formation of well‐defined polymer brushes, which subsequently resulted in the presence of free polymer chains in solution. The free polymer chains were isolated and used to estimate the molecular weights and polydispersity index of chains attached to the surface. In addition, by varying the polymerization time, we were able to obtain poly(VBTAC) brushes with grafting density up to 0.78 chains/nm² with homogeneous distributions of apparent needle‐like structures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Antibacterial poly(ethylene glycol) hydrogels from combined epoxy‐amine and thiol‐ene click reaction

Antibacterial hydrogels containing quaternary ammonium (QA) groups were prepared via a facile thiol‐ene “click” reaction using multifunctional poly(ethylene glycol) (PEG). The multifunctional PEG polymers were prepared by an epoxy‐amine ring opening reaction. The chemical and physical properties of the hydrogels could be tuned with different crosslinking structures and crosslinking densities. The antibacterial hydrogel structures prepared from PEG Pendant QA were less well‐defined than those from PEG Chain‐End QA. Furthermore, functionalization of the PEG‐type hydrogels with QA groups produced strong antibacterial abilities against Staphylococcus aureus, and therefore has the potential to be used as an anti‐infective material for biomedical devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 656–667     

An emerging post‐polymerization modification technique: The promise of thiol‐para‐fluoro click reaction

Post‐polymerization modification (PPM) of polymers is extremely beneficial in terms of designing brand new synthetic pathways toward functional complex polymers. Fortunately, the new developments in the field of organic chemistry along with controlled/living radical polymerization (CLRP) techniques have enabled scientists to readily design and synthesize the functionalized‐polymers for wide range of applications via the PPM. In this regard, the reactivity of para‐fluorine atom in the fluorinated aromatic structures toward the nucleophilic substitution reactions has made the polymers possessing this group to become a very strong candidate that can undergo efficient PPM. Besides, it has been proven that the thiol‐functionalized compounds react with the para‐fluorine atom of the pentafluorophenyl group more rapidly and efficiently than the amine‐ and the hydroxyl‐functionalized compounds. Furthermore, the milder experimental conditions to achieve quantitative conversions have led to the reaction between the thiol and the structures possessing pentafluorophenyl groups to be referred to as a click‐type reaction. Given this information, this review article aims to present the scientific developments regarding the thiol‐para‐fluoro “click” (TPF‐click) chemistry, and its impact on PPM to construct novel polymeric structures. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1181–1198     

Modification of RAFT‐polymers via thiol‐ene reactions: A general route to functional polymers and new architectures

An investigation into the aminolysis of ω‐end groups of RAFT‐polymers and simultaneous thiol‐ene reactions with ene‐bearing compounds is described. Three different polymers, P(MMA), P(HPMA), and P(NIPAAm), with low PDIs were synthesized using dithiobenzoate and trithiocarbonate RAFT agents. P(NIPAAm) synthesized with trithiocarbonate RAFT agent and P(HPMA) synthesized with dithiobenzoate RAFT agent were both functionalized with a methacrylate‐modified mannose and a maleimide‐modified biotin via one‐pot simultaneous aminolysis and thiol‐ene reactions with product yields above 85%. The presence of ene‐compounds during aminolysis was shown to prevent the formation of disulfide interchain crosslinking. Using the same approach, P(MMA), P(HPMA), and P(NIPAAm) were converted to (meth)acrylate macromonomers with high yields (>80%). In the case of P(MMA), the simultaneous aminolysis and thiol‐ene addition prevented any intrachain side reactions, i.e., thiolactone formation. New architectures such as graft and block copolymers were successfully generated from the macromonomers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3773–3794, 2009     

Facile synthesis of dendrimers combining aza‐Michael addition with Thiol‐yne click chemistry

We report a highly efficient approach to prepare dendrimers by taking advantage of the orthogonal characteristic of aza‐Michael addition and thiol‐yne reactions. A fifth generation dendrimer was synthesized within five steps without protection/activation procedures. The reactions proceed under benign conditions without byproducts, and the target products can be easily purified via extraction or precipitation without chromatography. The structure of each generation dendrimer was characterized using NMR spectroscopy, size exclusion chromatography, and mass spectrometry. The obtained dendrimers can have peripheral amine or alkyne groups. We demonstrated that these groups can be used for selective and specific conjugation with various functional groups. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photocaged pendent thiol polymer brush surfaces for postpolymerization modifications via thiol‐click chemistry

In this work, a postpolymerization surface modification approach is reported that provides pendent thiol functionality along the polymer brush backbone using the photolabile protection chemistry of both o‐nitrobenzyl and p‐methoxyphenacyl thioethers. Poly(2‐hydroxyethyl methacrylate) (pHEMA) brushes were synthesized via surface‐initiated atom transfer radical polymerization, after which the pHEMA hydroxyl groups were esterified with 3‐(2‐nitrobenzylthio)propanoic acid or 3‐(2‐(4‐methoxyphenyl)‐2‐oxoethylthio)propanoic acid to provide the photolabile protected pendent thiols. Addressing the protecting groups with light not only affords spatial control of reactive thiol functionality but enables a plethora of thiol‐mediated transformations with isocyanates and maleimides providing a modular route to create functional polymer surfaces. This concept was extended to block copolymer brush architectures enabling the modification of the chemical functionality of both the inner and outer blocks of the block copolymer surface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Lipidic polyols using thiol‐ene/yne strategy for crosslinked polyurethanes

Oleic acid and α,ω‐diacid were converted into propargylic esters followed by thiol‐ene/yne coupling (TEC/TYC) functionalization in presence of mercaptoethanol. The multiradical addition on fatty esters leads to the formation of lipidic polyols (OH1 and OH2), as judged by ¹H NMR and mass spectroscopies as well as by size exclusion chromatography. The crosslinking reaction between TEC/TYC‐based polyols and 4,4′‐methylene bis(phenylisocyanate) isocyanate reactant was monitored by FTIR experiment and reaction parameters were optimized. By differential scanning calorimetry, relatively high glass transitions are measured corresponding to structure with little or without dangling chain. Moreover, the thermal stability of the resulting plant oil‐based polyurethane materials (PU1 and PU2) were found to be fully consistent with that of other lipidic PUs respecting a three‐step process. Thanks to TYC methodology, fatty α,ω‐diacid produces lipidic polyol without dangling chain and lipidic thermoset PU with relatively high T_g. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1597–1606