Radical polymerization behavior and molecular weight development of homologous monoacrylate monomers in lyotropic liquid crystal phases

Polymerization in highly ordered lyotropic liquid‐crystalline (LLC) media enables controllable synthesis of polymers possessing interesting nanostructure and physical properties. This study investigates the radical polymerization rate and molecular weight (MW) development of monoacrylates of different aliphatic tail length in a range of LLC phases. Polymerization rate data were acquired using photodifferential scanning calorimetry, and linear polymer MW was determined with gel permeation chromatography. Polymerization occurs much more rapidly, and higher MW is attained in the ordered LLC phases relative to isotropic solutions and neat polymerization. These properties change significantly as a function of LLC phase and monomer structure. A direct relationship is observed between polymer MW formation and the polymerization rate. Definitive changes in rate and MW were observed at phase boundaries, indicating the important role of solvent order. This study demonstrates how solvent ordering effects can be used to control polymer MW and rate of polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 144–154     

Reactive ligand influence on initiation in phenylene catalyst‐transfer polymerization

Synthesizing conjugated polymers via catalyst‐transfer polymerization (CTP) has led to unprecedented control over polymer sequence and molecular weight. Yet many challenges remain, including broadening the monomer scope and narrowing the molecular weight dispersities. Broad polymer dispersities can arise from nonliving pathways as well as slow initiation. Previously, slow initiation was observed in Ni‐mediated CTP of phenylene monomers. Although precatalysts with faster initiation rates have been reported, the rates still do not exceed propagation. Herein a second‐ and third‐generation of reactive ligands are described, along with a simple method for measuring initiation rates. A precatalyst with an initiation rate that exceeds propagation is now reported, however, the resulting polymer samples still exhibit broad dispersities, suggesting that slow initiation is not the most significant contributing factor in Ni‐mediated phenylene polymerizations. In addition, initiation rates measured under authentic polymerization conditions revealed that both exogenous triphenylphosphine and an ortho‐trifluoroethoxy substituent on the reactive ligand have a strong influence. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1530–1535     

The influence of N‐vinyl pyrrolidone on polymerization kinetics and thermo‐mechanical properties of crosslinked acrylate polymers

Polymerization of multifunctional acrylate monomers generates crosslinked polymers that are noted for their mechanical strength, thermal stability, and chemical resistance. A common reactive diluent to photopolymerizable formulations is N‐vinyl pyrrolidone (NVP), which is known to reduce the inhibition of free radical photopolymerization by atmospheric oxygen. In this work, the copolymerization behavior of NVP was examined in acrylate monomers with two to five functional groups. At concentrations as low as 2 wt %, NVP increases the polymerization rate in copolymerization with multifunctional acrylate monomer. The relative rate enhancement associated with adding NVP increases dramatically as the number of acrylate double bonds changes from two to five. The influence of NVP on polymerization kinetics is related to synergistic cross‐propagation between NVP and acrylate monomer, which becomes increasingly favorable with diffusion limitations. This synergy extends bimolecular termination into higher double bond conversion through reaction diffusion controlled termination. Copolymerizing concentrations of 5–30 DB% NVP with diacrylate or pentaacrylate monomer also increases Young's modulus and the glass transition temperature (T_g) in comparison to neat acrylate polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4062–4073, 2007     

Controlling supramolecular polymerization through multicomponent self‐assembly

The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effects of cosolvents on helical substituted polyacetylene particles prepared through suspension polymerization

Acetylenic monomers undergo aqueous suspension polymerization providing particles constructed by helical substituted polyacetylene. Different from suspension polymerization of vinyl monomers, a cosolvent is indispensable to dissolve Rh catalyst and solid acetylenic monomers. The cosolvent is found to play essential roles in monomers' polymerization and the particles' formation. To systemically explore the effects of cosolvents, three monomers, M1 (achiral, liquid), M2 (achiral, solid), and M3 (chiral, solid), and six cosolvents (divided into two groups by their miscibility with water) are used for performing suspension polymerization in aqueous media at 30 °C, with Rh⁺B^– (C₆H₅)₄ as catalyst and polyvinylpyrrolidone as stabilizer. FTIR spectra and gel permeation chromatography confirm the occurrence of polymerization. Raman spectra demonstrate the high cis contents of the polymer chains. Scanning electron microscope images show that the polymer particles obtained under optimal conditions are in spherical morphology. Circular dichroism and UV‐vis spectroscopy demonstrate the helical structures of the polymer chains forming the chiral particles. Dynamic light scattering characterization is carried out to characterize the nanoparticles. The type and amount of the cosolvent affect the polymerization remarkably. Cosolvents with higher polarity lead to smaller polymer particles, while lower polar cosolvents provide larger ones. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2670–2678     

Expanding vinyl ether monomer repertoire for ring-expansion cationic polymerization: Various cyclic polymers with tailored pendant groups

Herein, we clarified the ring-expansion cationic polymerization with a cyclic hemiacetal ester (HAE)-based initiator was versatile in terms of applicable vinyl ether monomers. Although there was a risk that higher reactive vinyl ethers may incur β-H elimination of the HAE-based cyclic dormant species to irreversibly give linear chains, the polymerizations were controlled to give corresponding cyclic polymers from various alkyl vinyl ethers of different reactivities. Functional vinyl ether monomers were also available, and for instance a vinyl ether monomer carrying an initiator moiety for metal-catalyzed living radical polymerization in the pendant allowed construction of ring-linear graft copolymers through the grafting-from approach. Furthermore, ring-based gel was prepared via the addition of divinyl ether at the end of the ring-expansion polymerization, where multi HAE bonds cyclic polymers or fused rings were crosslinked with each other. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3082–3089     

Gel forming waterborne dispersion polymerization of sodium p‐styrene sulfonate with glycidyl methacrylate

Water soluble monomer like sodium p‐styrene sulfonate (SSS) is copolymerized with hydrophobic and reactive monomer glycidyl methacrylate (GMA). The polymerization proceeds as dispersion and forms gels. The gel forming nature prevails even with other hydrophobic and hydrophilic monomers to form ternary polymeric systems. The swelling is dependent on polymer composition as well as the treatment history of polymers. SSS also induces ring opening of GMA to form 1,2‐diols as confirmed independently by various model reactions. The ability of hydrogels to absorb various dyes indicates that owing to the anionic nature, hydrogels absorb cationic dyes nearly quantitatively. Because of their strong affinity to cationic species these hydrogel forming polymers are potentially useful in water purification applications as well as purification of proteins. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 626–634     

Probing cavity versus surface preference of fluorescent template molecules in molecularly imprinted polystyrene microspheres

Functional polystyrene (PS) crosslinked microbeads were developed by dispersion polymerization as fluorescent molecularly imprinted polymers (MIPs) having cavities with specific recognition sites. The functional azobenzene molecule modified with pyridine was self‐assembled with Pyrenebutyric acid (template molecules), and introduced during the second stage of dispersion polymerization of polystyrene. The template molecule was removed from MIP by Soxhlet using acetonitrile as solvent. Non imprinted polymer (NIP) having no template was also synthesized for comparative study. Fluorescence spectroscopy could be used as a tool to derive insight into the location of the template molecules on the MIP or NIP. The template molecules were adsorbed on the surface of the NIPs during binding studies, which was evidenced from the pyrene excimeric emission observed at 440 nm. The template binding efficiency of the NIPs were much lower compared to MIPs. Pyrene emission from MIP upon rebinding showed typical monomeric emission in the 375–395 nm range, confirming its location in isolated cavities. In rebinding studies of the template molecules, the MIPs selectively took up the template for which the cavity was designed, which demonstrated their selectivity towards template molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1558–1565     

Semicontinuous heterophase copolymerization of styrene and acrylonitrile

The synthesis of styrene‐acrylonitrile copolymers by semicontinuous heterophase polymerization is reported here. The effect of feed composition at a fixed addition rate of monomer mixture on kinetics, particle size, polymer content, and molar masses, was studied. This process permits the synthesis of nanolatexes containing narrow size‐distribution particles with number‐average diameter (D_n) of about 18 nm, polymer content as high as 23 wt %, and copolymer‐to‐surfactant weight ratios between 23 and 25, depending on monomer feeding rate, which are larger than those reported for microemulsion copolymerization of several comonomers. Copolymers with homogeneous composition similar to the feeding monomers composition were obtained thorough the reaction, which is difficult to achieve by batch polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Reactive polymer zwitterions: Sulfonium sulfonates

Sulfonium sulfonate, or sulfothetin, zwitterionic monomers were synthesized by ring‐opening of 1,3‐propanesultone with dialkyl sulfides containing styrenic or methacrylic moieties. Reversible addition‐fragmentation chain‐transfer polymerization of these monomers was achieved in water or trifluoroethanol, and the resulting polymers exhibited higher upper critical solution temperatures than the analogous sulfobetaine polymers. Unlike typical polymer zwitterions, these polymeric sulfothetins possess an inherent reactivity that proved tunable based on their chemical structures. This reactivity makes them amenable to post‐polymerization modification by nucleophilic dealkylation to rapidly access novel substituted polymers and gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 83–92     

Hydrogen-transfer polymerization of methyl-substituted acrylamides

Base-catalyzed hydrogen-transfer polymerization and copolymerization of acrylamide and its methyl-substituted derivatives were studied in pyridine at 110°C. n-Butyllithium was used as an initiator. The observed rates of these homopolymerizations were found to decrease in the following order: acrylamide > crotonamide > methacrylamide > N-methylacrylamide > N-methylcrotonamide > tiglinamide > N-methylmethacrylamide ? α-chlorocrotonamide ? α-cyanocrotonamide = 0. Acrylamide gave the polymer with the highest degree of polymerization among the monomers examined. It was found that the number and the position of the methyl substituent in acrylamide affected significantly both the rate of polymerization and the molecular weight of the polymer. Although all polymers obtained, except the N-methyl derivatives, contained both methanol-soluble and methanol-insoluble fractions, a polyamide structure with unsaturated terminal monomer unit was confirmed by both infrared and NMR determinations. From the NMR determination of the saturated and terminal unsaturated units, the degree of polymerization of the resulting polyamides were also obtained. The monomers were also found to copolymerize by a hydrogen-transfer mechanism. However, the main chain of the resulting copolymers was composed of the more reactive monomer unit, and the less reactive monomer was incorporated only as a terminal unit when a less reactive monomer was copolymerized with a more reactive one. From these results, it was concluded that these polymerizations proceeded via an intermolecular hydrogen-transfer mechanism (i.e., stepwise mechanism).     

Photopolymerization of poly(ethylene glycol) dimethacrylates: The influence of ionic liquids on the formulation and the properties of the resultant polymer materials

The photo‐initiated polymerization of poly(ethylene glycol)dimethacrylates [PEGDM(n)] in the presence of various ionic liquids (ILs) is reported. The influence of ILs concentrations as well as of their nature upon the photopolymerization kinetics was studied in detail. It was found that according to reactive ability in bulk and in solution photopolymerization, the investigated monomers can be divided into two groups: PEGDM(1)–PEGDM(2)–PEGDM(3) and PEGDM(4)–PEGDM(7‐8). ILs slightly influence the photopolymerization of monomers from the first group and greatly change kinetics of those from the second. Such behavior was explained by the theory of “kinetically favorable or unfavorable monomer associations.” It was demonstrated that certain ILs accelerate the photopolymerization of the highest PEGDMs and offer access to the polymers derived from low reactive monomers. Relying on the obtained data, the attempt to predict the structure of the “best” ionic additive for the given monomer photopolymerization was performed and proved. Finally, the influence of both residual and specially added ILs quantities upon the properties of obtained polymer materials was investigated. It was revealed that ILs can physically interact with polymer networks increasing their thermal stability, plasticizing films, and blocks, imparting ionic conductivity equal up to 3.62 × 10^?3 Sm/cm at 25 °C. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2388–2409, 2010     

One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

Toward a versatile toolbox for cucurbit[n]uril-based supramolecular hydrogel networks through in situ polymerization

The success of exploiting cucurbit[n]uril (CB[n])-based molecular recognition in self-assembled systems has sparked a tremendous interest in polymer and materials chemistry. In this study, polymerization in the presence of host-guest complexes is applied as a modular synthetic approach toward a diverse set of CB[8]-based supramolecular hydrogels with desirable properties, such as mechanical strength, toughness, energy dissipation, self-healing, and shear-thinning. A range of vinyl monomers, including acrylamide-, acrylate-, and imidazolium-based hydrophilic monomers, could be easily incorporated as the polymer backbones, leading to a library of CB[8] hydrogel networks. This versatile strategy explores new horizons for the construction of supramolecular hydrogel networks and materials with emergent properties in wearable and self-healable electronic devices, sensors, and structural biomaterials. © 2017 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3105–3109     

Carboxylic acid‐containing benzoxazines as efficient catalysts in the thermal polymerization of benzoxazines

The autocatalytic thermal polymerization behavior of three benzoxazine monomers containing carboxylic acid functionalities is reported. Several mixtures of these carboxylic monomers and 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine were prepared and their thermal polymerization behavior was analyzed by differential scanning calorimetry. The acid character of these reactive monomers increases the concentration of oxonium species, thus catalyzing the benzoxazine ring opening reaction. In this way the polymerization temperature decreased by as much as 100 °C in some cases. The existence of decarboxylation processes at high temperatures has been established by FTIR‐ATR and related to the increase in thermal stability observed by TGA in some cases. A relationship between the presence of carboxylic groups in the resulting materials and their flame retardancy behavior has also been established. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6091–6101, 2008     

Ring opening metathesis polymerization of triazole‐bearing cyclobutenes: Diblock copolymer synthesis and evaluation of the effect of side group size on polymerization kinetics

Cyclobutenes containing pendant groups of varying sizes were polymerized via ring opening metathesis polymerization using Grubbs catalyst 2nd generation (G2). The rate of polymerization depended on the size of the pendant groups attached to the cyclobutene rings, with longer side‐chains producing slower polymerization rates and narrower molecular weight distributions. The polymerization of these new molecules proceeded with first order kinetics, consistent with a living polymerization. Chain extension experiments produced cyclobutene‐based diblock copolymers with polydispersity indices below 1.33. The synthetic methods in this report will allow the use of G2 to access new complex polymeric architectures with a higher density of pendant groups than those derived from norbornene analogs and cyclooctene moieties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1929–1939     

Simultaneous interpenetrating polymer networks based on epoxy–acrylate combinations

Simultaneous interpenetrating polymer networks (SINs) based on epoxy/poly(n-butyl acrylate) systems were synthesized at 120°C. The polymerization kinetics were studied both in situ by Fourier Transform Infrared Spectroscopy (FT–IR). Three key events occurred during the polymerization, namely the gelation of the network I, gelation of the network II, and phase separation of one polymer from the other. Thus, metastable phase diagrams describing the relations between the three events were constructed. Three-dimensional tetrahedrons characterizing the four-component system (the two monomers and the two polymers) allow the visualization of these three key events and also define some critical points, for example, the loci of the points where simultaneous gelation of the two networks occurs. The inside of the tetrahedron was also investigated using partially reacted model compounds. These tetrahedrons can be used as guidelines for setting up a synthesis strategy leading to desired morphologies. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1973–1984, 1997     

Samarium poly(oxamide) polyanions as novel polymeric initiators. One-pot syntheses of graft copolymers

Samarium poly(oxamide) polyanions, formed quantitatively in situ by the reductive coupling polymerization of aromatic diisocyanates with samarium (II) iodide/hexamethylphosphoramide (HMPA) system, were directly used as the polymeric initiators in the graft polymerization with some electrophilic monomers. The graft polymerization of ϵ-caprolactone (CL) with several polyanions derived from bifunctional isocyanates, including tolylene 2,6-diisocyanate, o-tolidine diisocyanate and diphenylmethane diisocyanate, provided the corresponding graft copolymers in one-pot, indicating that the polyanion could work as a new type of reactive polymer. Several factors such as reaction temperature and time and the amount of HMPA and CL affected the behavior of the present polymerization system, and the graft copolymer was obtained quantitatively under the appropriate conditions. The results of the graft polymerizations of tert-butyl methacrylate and methyl methacrylate with the polyanion were also presented. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1381–1387, 1997     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386