Step‐growth thiol–thiol photopolymerization as radiation curing technology

This report introduces a novel UV‐curing technology based on thiol–thiol coupling for polydisulfide network formation. Beginning with a model tris(3‐mercaptopropionate) trithiol monomer and xanthone propionic acid‐protected guanidine as photobase generator, a comprehensive characterization based on spectroscopic techniques supports the reaction of thiols into disulfides without side reactions. The best experimental conditions are described as regards to film thickness, irradiance, emission wavelength, and atmosphere composition. The results shed light on a step‐growth photopolymerization mechanism involving two steps: first, the formation of thiyl radicals by thiolate air oxidation or/and thiol photolysis, and second, their recombination into disulfide. By varying thiol functionality and structure, oligomer chain length and monomer/oligomer ratio, the network architecture can be finely tuned. The molecular mobility of the polydisulfide network is crucial to high thiol conversion rates and yields as revealed by ¹H T₂ NMR relaxation measurements. Ultimately, spatial control enables the formation of a photopatterned poly(disulfide) film, used as next‐generation high refractive index photoresist. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 117–128.     

Silicon‐based mercaptans: High‐performance monomers for thiol‐ene photopolymerization

Ester‐free silane and siloxane‐based thiol monomers were successfully synthesized and evaluated for application in thiol‐ene resins. Polymerization reaction rates, conversion, network properties as well as degradation experiments of those thiol monomers in combination with triallyl‐1,3,5‐triazine‐2,4,6(1H,3H,5H)‐trione (TATT) as ene component were performed and compared with formulations containing the commercially available mercaptopropionic ester‐based thiol pentaerythritol tetra‐3‐mercaptopropionate. Kinetic analysis revealed appropriate reaction rates and conversions reaching 90% and higher. Importantly, storage stability tests of those formulations clearly indicate the superiority of the synthesized mercaptans compared with pentaerythritol tetra‐3‐mercaptopropionate/TATT resins. Moreover, photocured samples containing silane‐based mercaptans provide higher glass transition temperatures and withstand water storage without a significant loss in their network properties. This behavior together with the observed excellent degradation resistance of photocured silane‐based thiol/TATT formulations make these multifunctional mercaptans interesting candidates for high‐performance applications, such as dental restoratives and automotive resins. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 418–424     

A study of the effects of thiols on the frontal polymerization and pot life of multifunctional acrylate systems with cumene hydroperoxide

In an effort to create frontal polymerization systems with a “fail‐safe” curing mechanism, we studied the effects of thiols on the thermal frontal polymerization velocity and pot life of a mixture of a multifunctional acrylate, kaolin clay (filler), and cumene hydroperoxide with either trimethylolpropane tris(3‐mercaptopropionate) or 1‐dodecanethiol (DDT). The acrylates were trimethylolpropane triacrylate, trimethylolpropane ethoxylate triacrylate, 1,6‐hexanediol diacrylate, and di(ethylene glycol) diacrylate. Without a thiol, frontal polymerization did not occur. The front velocity increased with the concentration of either thiol, which has not been observed with peroxide initiators. The use of DDT yielded longer pot lives than the trithiol. The front velocities were inversely related to the pot lives. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3850–3855     

Structural diversity in poly(disulfide)s

This article reports a synthetic methodology for single step preparation of telechelic poly(disulfide)s (PDS) by step‐growth polymerization between a di‐thiol and a commercially available monomer 2,2′‐dithiodipyridine in presence of a functional group appended pyridyl disulfide moiety as the “mono‐functional impurity” (MFI). Redox‐destructible well‐defined segmented PDSs with functional chain terminal, predicted and tunable degree of polymerization and narrow polydispersity index (<2.0) could be synthesized under a mild reaction condition. Using an appropriate MFI, PDS could be synthesized with trithiocarbonate chain terminals in a single step, which could be further used as macro chain‐transfer agent (CTA) for chain growth polymerization under RAFT mechanism producing ABA type tri‐block copolymer wherein the B block consists of the degradable PDS chain. By copolymerization between a hydrophobic di‐thiol monomer and a hydroxyl group appended di‐thiol monomer, PDS could be prepared with pendant hydroxyl functional group which was utilized to initiate ring opening polymerization of cyclic lactide monomers producing well‐defined degradable graft‐copolymer. The pendant hydroxyl groups were further utilized to anchor a polar carboxylic group to the degradable PDS backbone which under basic condition showed aqueous self‐assembly generating micelle‐like structure with hydrophobic guest encapsulation ability and glutathione responsive sustained release. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 194–202     

Kinetic analyses of disulfide formation between thiol groups attached to linear poly(acrylamide)

Kinetic analyses were carried out for formation of disulfide crosslinkages between thiol groups on linear polymers, poly(acrylamide‐co‐N‐acrylcysteamine) (P‐SH). Disulfide crosslinkages were formed by auto‐oxidation of pendant thiol groups or through the thiol‐disulfide exchange reaction induced by addition of disulfide compounds gluthathione. In the auto‐oxidation reaction, the rate constant for disulfide formation highly depended on pH values of the reaction mixtures and the P‐SH concentrations. Gelation rate is too slow to enclose living cells into hydrogel under physiological pH 7.4. The hydrogel formation rate can be accelerated by addition of disulfides, such as oxidized glutathione. In the later case, oxygen in the reaction mixture is not consumed. The thiol‐disulfide exchange reaction is much more suitable for the cell encapsulation than the thiol auto‐oxidation reaction. These findings give a basis for enclosure of living cells in a hydrogel. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Thiol‐functionalized 1,3‐benzoxazine: Preparation and its use as a precursor for highly polymerizable benzoxazine monomers bearing sulfide moiety

We describe a new strategy for preparation of benzoxazine monomers based on in situ preparation of a thiol‐functionalized benzoxazine and successive chemical modification of the thiol moiety. The thiol‐functionalized benzoxazine can be prepared from its precursor bearing two benzoxazine moieties linked by disulfide bond. Reductive cleavage of the disulfide bond of the precursor with using triphenylphosphine as a reducing agent allows successful preparation of the thiol‐functionalized benzoxazine. By performing this reduction process in the presence of epoxides and acrylates, the formation of the thiol moiety and its successive reaction with those electrophiles proceed efficiently to give the corresponding benzoxazines with sulfide moieties. The benzoxazine monomers thus prepared exhibit much higher polymerization ability than those without sulfide moiety. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1448–1457     

Scalable ambient synthesis of water‐soluble poly(β‐hydroxythio‐ether)s

Proton transfer polymerization through thiol‐epoxy “click” reaction between commercially available and hydrophilic di‐thiol and di‐epoxide monomers is carried out under ambient conditions to furnish water‐soluble polymers. The hydrophilicity of monomers permitted use of aqueous tetrahydrofuran as the reaction medium. A high polarity of this solvent system in turn allowed for using a mild catalyst such as triethylamine for a successful polymerization process. The overall simplicity of the system translated into a simple mixing of monomers and isolation of the reactive polymers in an effortless manner and on any scale required. The structure of the resulting polymers and the extent of di‐sulfide defects are studied with the help of 13C‐ and ¹H‐NMR spectroscopy. Finally, reactivity of the synthesized polymers is examined through post‐polymerization modification reaction at the backbone sulfur atoms through oxidation reaction. The practicality, modularity, further functionalizability, and water solubility aspects of the described family of new poly(β‐hydroxythio‐ether)s is anticipated to accelerate investigations into their potential utility in bio‐relevant applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3381–3386     

Dual‐responsive crosslinked micelles of a multifunctional graft copolymer for drug delivery applications

A novel multifunctional amphiphilic graft copolymer has been synthesized consisting of a biodegradable poly(l ‐aspartic acid) backbone that was decorated by water‐soluble poly(ethylene glycol) (PEG) and pH‐responsive poly(N,N‐diethylaminoethyl methacrylate) (PDEAEMA) side‐chains as well as thiol pendant groups. This graft copolymer together with doxorubicin (DOX) formed micelles in water at pH = 10.0 with PDEAEMA and DOX acting as the core and PEG serving as the micellar corona. Upon oxidation, the thiol groups dimerized to form disulfide bonds, thus “locking in” the micellar structure. These crosslinked micelles expanded as the pH was decreased from 7.4 to 5.0 or upon the addition, at pH = 7.4, of glutathione (GSH), a thiol‐containing oligopeptide that is present in cancerous cells and cleaves disulfide bonds. At pH = 5.0, GSH addition triggered the disassembly of the micelles. The expansion and disassembly of the micelles have been determined via in vitro experiments to evaluate their DOX release behavior. More importantly, the graft copolymer micelles could enter cells by means of endocytosis and deliver DOX to the nuclei of ovarian cancer BEL‐7402 cells. Thus, this polymer and its micelles are promising candidates for drug delivery applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1536–1546     

Thiol‐ene photopolymerization of polymer‐derived ceramic precursors

The liquid, ceramic precursor monomer VL20 was copolymerized with a thiol monomer in a traditional radical thiol‐ene photopolymerization. Polymerization occurred via addition of the thiol functional group to the vinyl silazane functional group in a 1:1 ratio consistent with a step‐growth polymerization. Gelation occurred at a high conversion of functional groups (70%) consistent with an average molecular weight and functionality of 560 and 1.7, respectively, for VL20 monomers. Initiatorless photopolymerization of the thiol‐VL20 system also occurred upon irradiation at either 365 or 254 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1752–1757, 2004     

Synthesis and photopolymerization of novel multifunctional vinyl esters

Novel mono‐ and multifunctional vinyl ester monomers containing thioether groups were synthesized via an amine‐catalyzed Michael addition reaction between vinyl acrylate and multifunctional thiols. Using photo‐differential scanning calorimetry and real‐time Fourier transform infrared (RTIR) spectroscopy, the polymerization kinetics and oxygen inhibition of the homopolymerizations of the vinyl ester monomers were investigated. The effect of the vinyl ester and thioether group on acrylate/vinyl ester and thiol/vinyl ester copolymerizations was determined using real‐time IR spectroscopy to monitor polymerization rates of acrylate, vinyl, and thiol groups simultaneously. Polymerization of the vinyl esters used was found to be relatively insensitive to oxygen inhibition. We propose that the thioether group is responsible for reducing oxygen inhibition by a series of chain transfer/oxygen‐scavenging reactions. In polymerization of a acrylate/vinyl ester mixture both in nitrogen and in air, the vinyl ester monomer significantly enhances the polymerization rates and the conversion of the acrylate double bonds via plasticization of the crosslinked matrix and reduction of inhibition by oxygen. Ultimately, the vinyl ester monomer is incorporated into the polymer network. Thiol/vinyl ester free‐radical copolymerization is much faster than either thiol/allylether copolymerization or vinyl ester homopolymerization. The electron‐rich vinyl ester double bonds ensure rapid copolymerization with thiol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4424–4436, 2004     

Synthesis of Upconverting Hydrogel Nanocomposites Using Thiol‐Ene Click Chemistry: Template for the Formation of Dendrimer‐Like Gold Nanoparticle Assemblies

The synthesis of upconverting hydrogel nanocomposites by base‐catalyzed thiol‐ene click reaction between 10‐undecenoic acid capped Yb³⁺/Er³⁺‐doped NaYF₄ nanoparticles and pentaerythritol tetrakis(3‐mercaptopropionate) (PETMP) as tetrathiol monomer is reported. This synthetic strategy for nanocomposite gels is quite different from works where usually the preformed gels are mixed with the nanoparticles. Developing nanocomposites by surface modification of capping ligands would allow tuning and controlling of the separation of the nanoparticles inside the gel network. The hydrogel nanocomposites prepared by thiol‐ene click reaction show strong enhancement in luminescence intensity compared to 10‐undecenoic acid‐capped Yb³⁺/Er³⁺‐doped NaYF₄ nanoparticles through the upconversion process (under 980 nm laser excitation). The hydrogel nanocomposites display strong swelling characteristics in water resulting in porous structures. Interestingly, the resulting nanocomposite gels act as templates for the synthesis of dendrimer‐like Au nanostructures when HAuCl₄ is reduced in the presence of the nanocomposite gels.     

Novel conducting polymer poly[bis(phenylamino)disulfide]: Synthesis,characterization, and properties

A bis(phenylamino)disulfide was prepared through the reaction of S₂Cl₂ with aniline, and its configuration was confirmed with elemental analysis, Fourier transform infrared (FTIR), Fourier transform Raman (FT‐Raman), and ¹H NMR spectroscopy. A novel conducting polymer, poly[bis(phenylamino)disulfide] (PPAD), was synthesized from bis(phenylamino)disulfide by both chemical and electrochemical polymerization. The structure of this polymer, in which the side‐chain disulfide bonds were linked to the nitrogen atoms of the main‐chain polyaniline, was characterized with FTIR, FT‐Raman, gel permeation chromatography, electron spectroscopy, and X‐ray photoelectron spectroscopy. A four‐probe measurement revealed that the electrical conductivity of PPAD was 1.8 × 10^?2 to 2.1 × 10^?3 S cm^?1, depending on the doping agents and the pH of the medium for either chemical synthesis or electrochemical synthesis. The conductivity, molecular weight, and spectroscopic properties of the polymer, in comparison with those of polyaniline, showed decreases in the polaron delocalization, structural order, and doping level of the main chain because of the steric hindrance of side‐chain S? S bonds. The cyclic voltammograms of the polymer and the monomer showed that the redox reactions (doping/undoping processes) of the main chain (π‐conjugated system) occurred in almost the same potential range of ?0.3 to 0.3 V versus an Ag/AgCl (saturated KCl) electrode as that of thiol (thiolate anion)/disulfide of the side chain in PPAD; the bond cleavage (reduction) and formation (oxidation) reactions of the disulfide bond in the polymer became easier and more reversible than those of the monomer. These results suggested that this conducting organodisulfide polymer might be a candidate material for energy‐storage devices such as lithium secondary batteries, proton‐exchange batteries, and electrochemical capacitors. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2329–2339, 2004     

Influence of the alkene structure on the mechanism and kinetics of thiol–alkene photopolymerizations with real‐time infrared spectroscopy

The effect of the chemical structure on the reactivity of alkenes used in thiol–ene photopolymerizations has been investigated with real‐time infrared spectroscopy. Model studies of thiol–ene photoreactions with various monofunctional hydrocarbon alkenes and the monofunctional thiol ethyl‐3‐mercaptopropionate have been performed to identify and understand structure–reactivity relationships. The results demonstrate that terminal enes react very rapidly with thiol, achieve complete conversion, and are independent of the aliphatic hydrocarbon substituent length. Disubstitution on a single carbon of a terminal ene significantly reduces the reactivity, whereas substitution on the carbon α to the terminal ene has a minimal influence on the reactivity. Internal trans enes display reduced reactivity and a lower overall conversion and deviate from the standard thiol–ene reaction mechanism because of steric strain induced by 1,3‐interactions. The reactivity and conversion of internal trans enes decrease as the substituents on the ene become larger, reaching a minimum when the substituent size is greater than or equal to that of propyl groups. Internal cis enes react rapidly with thiol; however, they undergo a fast isomerization–elimination reaction sequence generating the trans ene, which proceeds to react at a reduced rate with thiol. The reactivity of cyclic enes is dictated by ring strain, stereoelectronic effects, and hydrogen abstractability. The reactivity trends in the model studies have been used to explain the photopolymerization mechanism and kinetics of a series of multifunctional thiol–ene systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6283–6298, 2004     

Preparation of linear and hyperbranched fluorinated poly(aryl ether‐thioether) through para‐fluoro‐thiol click reaction

The para‐fluoro‐thiol “click” reaction (PFTCR) was utilized to prepare linear and hyperbranched fluorinated poly (aryl ether‐thioether). For this purpose, 1,2‐bis(perfluorophenoxy)ethane was prepared and reacted with 1,6‐hexandithiol and trimethylolpropane tris(3‐mercaptopropionate), respectively. While hyperbranched polymers were prepared using 0.5 M concentrations of starting materials at room temperature, the linear polymer syntheses were performed at different reaction temperatures and concentrations. The resulting polymers were mainly characterized by NMR measurements and a very distinct fluorine signals regarding meta‐ and ortho‐ positions in the ¹⁹F NMR were found for both polymer topologies. In addition to NMR analyses, both linear and hyperbranched polymers were further characterized by using Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1853–1859     

Oxygen inhibition in thiol–acrylate photopolymerizations

The overall effects of oxygen on thiol–acrylate photopolymerizations were characterized. Specially, the choice of thiol monomer chemistry, functionality, and concentration on the extent of oxygen inhibition were considered. As thiol concentration was increased, the degree of oxygen inhibition was greatly reduced because of chain transfer from the peroxy radical to the thiol. When comparing the copolymerization of 1,6‐hexanediol diacrylate with the alkane‐based thiol (1,6‐hexane dithiol) to the copolymerization with the propionate thiol (glycol dimercaptopropionate), it was found that the propionate system was much more reactive and polymerized to a greater extent in the presence of oxygen. In addition, the functionality was considered where the glycol dimercaptopropionate was compared to a tetrafunctional propionate of similar chemistry (pentaerythritol tetrakis(mercaptopropionate)). Given the same thiol concentration, the higher functionality thiol imparted a faster polymerization rate, due to the increased polymer system viscosity, which limited oxygen diffusion and decreased the extent of overall oxygen inhibition. Thus, preliminary insight is provided into how thiol monomer choice affects the extent of oxygen inhibition in thiol–acrylate photopolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2007–2014, 2006     

Direct MALDI‐MS analysis of the disulfide bonds in peptide using thiosalicylic acid as a reactive matrix

The ability of a thiol‐containing molecule, thiosalicylic acid (TSA), to function as a reactive matrix for matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry analysis of peptides has been investigated. Although TSA has reducing characteristics, the use of TSA did not cause a reduction‐induced MALDI in‐source decay, probably because of the weak interactions between the thiol group in TSA and the carboxyl oxygen in the peptide. In contrast, when peptides containing disulfide bonds were analyzed by MALDI with TSA as the matrix, the disulfide bond was partially cleaved owing to the reaction with TSA, producing TSA‐adducted peptides. The reaction between the disulfide bond and TSA was suggested to be occurred in solution. The comparison of the MALDI mass spectra obtained using conventional matrix and TSA allows us to count the number of disulfide bonds in the peptides. Copyright © 2017 John Wiley & Sons, Ltd.     

Self‐organization of liquid crystalline 3,4,5‐tris[(11‐methacryloyl‐undecyl‐1‐oxy)‐4‐benzyloxy]benzoates in low‐shrinkage methacrylate mixtures

Crystallization and supramolecular aggregation of 3,4,5‐tris[(11‐methacryloyl‐undecyl‐1‐oxy)‐4‐benzyloxy]benzoate (1), 2‐methyl‐(1,4,7,10,13‐pentaoxabenzocyclopentadecane)‐3,4,5‐tris[(11‐methacryloyl‐undecyl‐1‐oxy)‐4‐benzoxyloxy]benzoate (2) and its 1 : 1 sodium triflate complex (2a) are described in solutions of methacrylate monomers. Formation of gels and subsequent polymerization yielded “supramolecular interpenetrating networks” consisting of an isotropic polymethacrylate resin, percolated by supramolecular aggregates of the solute, which are covalently connected to the resin phase. Compound 1 formed whisker‐type crystals, while 2 self‐organizes in networks of elongated supramolecular fibrils with diameters corresponding to the twofold length of one molecule. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 631–640, 2000     

Block copolymer micelles with enzyme molecules at the interfaces

This research provides an efficient method for the fabrication of hybrid micelles with enzyme molecules at the interfaces. Amphiphilic block copolymer is synthesized by reversible addition–fragmentation chain transfer (RAFT) polymerization, and thiol‐modified porcine pancreatic lipase (PPL‐SH) is obtained by treatment of native PPL with Traut's reagent. PPL‐SH is conjugated to the block copolymer chains by thiol‐disulfide exchange reaction. In phosphate buffered saline, the bioconjugate self‐assembles into micelles with enzyme molecules at the interfaces between hydrophobic cores and hydrophilic coronae. The bioactivity of the enzyme molecules on the micelles are compared with the native enzyme. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2047–2052     

Gel forming waterborne dispersion polymerization of sodium p‐styrene sulfonate with glycidyl methacrylate

Water soluble monomer like sodium p‐styrene sulfonate (SSS) is copolymerized with hydrophobic and reactive monomer glycidyl methacrylate (GMA). The polymerization proceeds as dispersion and forms gels. The gel forming nature prevails even with other hydrophobic and hydrophilic monomers to form ternary polymeric systems. The swelling is dependent on polymer composition as well as the treatment history of polymers. SSS also induces ring opening of GMA to form 1,2‐diols as confirmed independently by various model reactions. The ability of hydrogels to absorb various dyes indicates that owing to the anionic nature, hydrogels absorb cationic dyes nearly quantitatively. Because of their strong affinity to cationic species these hydrogel forming polymers are potentially useful in water purification applications as well as purification of proteins. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 626–634     

One‐pot synthesis of soluble and fluorescent aliphatic hyperbranched poly(amide‐imide) with solvent‐dependent emission

Aliphatic hyperbranched poly(amide‐imide) was facilely prepared by employing a functional thiolactone‐maleimide monomer. Highly efficient, selective and quantitative properties of amine‐maleimide Michael addition and aminolysis of a thiolactone guaranteed the generation of an ABB' thiol‐yne intermediate without side products, followed by consecutive thiol‐yne click reaction in one‐pot. The hyperbranched structure of the poly(amide‐imide) was confirmed by NMR spectroscopy and triple‐detector GPC/SEC analysis. Additionally, due to the presence of aminosuccinimide fluorophores and intrinsic physical property of hyperbranched polymers, this aliphatic hyperbranched poly(amide‐imide) possessed solvent‐dependent emission and presented good solubility in various organic solvents. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2053–2060