共查询到20条相似文献,搜索用时 31 毫秒
1.
Tugce Nur Eren Neren Okte Fabrice Morlet‐Savary Jean Pierre Fouassier Jacques Lalevee Duygu Avci 《Journal of polymer science. Part A, Polymer chemistry》2016,54(20):3370-3378
The photochemical and photophysical properties of new polymeric photoinitiators (PPIs) containing pendant thioxanthone (TX) and amine moieties are studied. The PPIs are synthesized by copolymerization of tert‐butyl 2‐((9‐oxo‐9H‐thioxanthen‐2‐yloxy)methyl)acrylate (TX1) with N,N‐dimethylaminoethyl methacrylate (DMAEM) at two different ratios using free radical polymerization. UV–vis spectra indicate that PPIs possess similar absorption characteristics to TX1 in the violet range (~400 nm; absorption red‐shift 20 nm). The photochemical mechanisms are studied by electron spin resonance (ESR), steady state photolysis, laser flash photolysis, and cyclic voltammetry. ESR studies indicate formation of two different aminoalkyl radicals on the hydrogen donor amine. The triplet state of the PPIs is short‐lived compared to isopropyl thioxanthone and TX1, due to the built‐in amine functionality. Photopolymerization of trimethylolpropane triacrylate (TMPTA) initiated by these photoinitiators under LED exposure at 385 and 405 nm using real‐time FTIR spectroscopy shows that they exhibit higher efficiency than TX/N‐methyldiethanolamine (MDEA) and TX1/MDEA systems with the advantage of a much higher molecular weight that can be very helpful to overcome migration issues. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3370–3378 相似文献
2.
Visible light‐emitting diode‐sensitive thioxanthone derivatives used in versatile photoinitiating systems for photopolymerizations
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Xingyu Wu Ming Jin Jean‐Pierre Malval Decheng Wan Hongting Pu 《Journal of polymer science. Part A, Polymer chemistry》2017,55(24):4037-4045
Novel thioxanthone (TX) derivatives are used as versatile photoinitiators upon visible light‐emitting diode (LED; e.g., 405, 425, and 450 nm) exposure. The mechanisms for the photochemical generation of reactive species (i.e., cations and free radicals) produced from photoinitiating systems based on the photoinitiator and an iodonium salt, tris(trimethylsilyl)silane, or an amine, were studied by UV–vis spectroscopy, fluorescence, cyclic voltammetry, steady‐state photolysis, and electron spin resonance spin‐trapping techniques. The reactive species are particularly efficient for cationic, free radical, hybrid, and thiol‐ene photopolymerizations upon LED exposure. The optimized photoinitiating systems exhibit higher efficiency than those of reference systems (i.e., isopropyl TX‐based photoinitiating systems), especially in the visible range. According to their beneficial features, these photoinitiating systems have considerable potential in photocuring applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4037–4045 相似文献
3.
Gorkem Yilmaz Alev Tuzun Yusuf Yagci 《Journal of polymer science. Part A, Polymer chemistry》2010,48(22):5120-5125
A thioxanthone (TX) derivative with the additional carbazole chromophore, namely thioxanthone‐carbazole (TX‐C) was synthesized and characterized. The photophysical properties and its efficiency to polymerize methyl methacrylate both in the presence and absence of N,N‐dimethylaniline (DMA) as coinitiator was investigated and compared with that of the commercially available TX. TX‐C was found to display better photophysical properties and in both cases initiate polymerization more efficiently. Detailed real‐time Fourier transform infrared studies revealed that high polymerization rates can be obtained when TX‐C in conjunction with DMA was used. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010 相似文献
4.
《Journal of polymer science. Part A, Polymer chemistry》2018,56(16):1878-1883
Thioxanthone–anthracene‐9‐carboxylic acid (TX‐ANCA) namely 14‐oxo‐14H‐naphthol [2,3‐b]thioxanten‐12‐carboxylic acid, is synthesized and characterized as part of our continuing interest for syntheses of polyaromatic initiators. Photoinitiator, TX‐ANCA have good absorption properties in the UV and visible region of the electromagnetic spectrum (ɛ370: 9080 M−1cm−1, ɛ430: 6151 M−1 cm−1). The fluorescence quantum yield is calculated as 0.1 which is slightly higher than of the parent thioxanthone compound (φf: 0.07). The phosphorescence lifetime is found to be 39 ms. The possible initiating mechanism of TX‐ANCA is based on photoexcitation of TX‐ANCA and quenching of triplet excited states of TX‐ANCA by molecular oxygen generates singlet oxygen. Singlet oxygen reacts with the anthracene moiety of TX‐ANCA possibly forms an endoperoxide. The endoperoxides undergoes photochemical or thermal decomposition to form radicals which are able to initiate free radical polymerization. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1878–1883 相似文献
5.
Teng Chi Paul Somers Daniel A. Wilcox Ashley J. Schuman Vasudevan Iyer Ran Le Jamie Gengler Manuel Ferdinandus Carl Liebig Liang Pan Xianfan Xu Bryan W. Boudouris 《Journal of Polymer Science.Polymer Physics》2019,57(21):1462-1475
Printing of high‐resolution three‐dimensional nanostructures utilizing two‐photon polymerization has gained significant attention recently. In particular, isopropyl thioxanthone (ITX) has been implemented as a photoinitiator due to its capability of initiating and depleting polymerization on demand, but new photoinitiating materials are still needed in order to reduce the power requirements for the high‐throughput creation of 3D structures. To address this point, a suite of new thioxanthone‐based photoinitiators were synthesized and characterized. Then two‐photon polymerization was performed using the most promising photoinitiating molecule. Importantly, one of the initiators, 2,7‐bis[(4‐(dimethylamino)phenyl ethynyl)‐9H‐thioxanthen‐9‐one] (BDAPT), showed a fivefold improvement in the writing threshold over the commonly used ITX molecule. To elucidate the fundamental mechanism, the excitation and inhibition behavior of the BDAPT molecule were evaluated using density functional theory (DFT) calculations, low‐temperature phosphorescence spectroscopy, ultra‐fast transient absorption spectroscopy, and the two‐photon Z‐scan spectroscopic technique. The improved polymerization threshold of this new photoinitiator presents a clear pathway for the modification of photoinitiators in 3D nanoprinting. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1462–1475 相似文献
6.
James V. Crivello Jinseo Ahn 《Journal of polymer science. Part A, Polymer chemistry》2003,41(16):2570-2587
A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003 相似文献
7.
N‐alkoxypyridinium salts as coinitiators in radical polymerization: Synthesis and Photochemical Properties
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Janina Kabatc Katarzyna Kostrzewska Robert Dobosz Łukasz Orzeł Katarzyna Jurek 《Journal of polymer science. Part A, Polymer chemistry》2017,55(17):2840-2850
A few N‐alkoxypyridinium salts are developed as photoinitiators for efficient polymerization reactions. They are characterized by absorption properties below 300 nm, and generate alkoxy radicals on UV‐Vis light exposure. The squarylium dye was used as a blue‐light photosensitizer. Polymerization results are correlated with the photochemistry of N‐alkoxypyridinium salts. The quenching of the excited singlet state of squarylium dye by pyridinium salt and the formation of the semioxidized species of squaraine suggests an electron transfer from an excited dye to a coinitiator, and that the resulting oxygen‐centered radical initiates the polymerization process. The chemical mechanism was investigated by steady state photolysis and nanosecond laser flash photolysis experiments. Photoinitiating activity of new photoinitiators for initiation of polymerization of trimethylolpropane triacrylate in the UV‐blue light region was compared with photoinitiating ability of selected commercially available initiators. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2840–2850 相似文献
8.
2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Ming Jin Man Yu Yuan Zhang Decheng Wan Hongting Pu 《Journal of polymer science. Part A, Polymer chemistry》2016,54(13):1945-1954
Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954 相似文献
9.
Effect of Polymerizable Photoinitiators on the UV‐polymerization behaviors of photosensitive polysiloxane
下载免费PDF全文
![点击此处可从《Journal of polymer science. Part A, Polymer chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Bo Jiang Tong Zhang Liwei Zhao Zhiming Xu Yudong Huang 《Journal of polymer science. Part A, Polymer chemistry》2017,55(10):1696-1705
In this contribution, three polymerizable benzophenone photoinitiators containing maleimide group including 4‐maleimidebenzophenone (MBP), 4‐chlorine‐4′‐maleimide benzophenone (CMBP), and 4‐maleimide‐4′‐[(4‐maleimide)thiophenyl]benzophenone (MMTBP) were designed and synthesized to enhance the polymerization degree of photosensitive polysiloxane containing methacryloxy active groups (MAPSO). The polymerization behaviors of the MAPSO cured by different photoinitiators were investigated using Fourier transform infrared (FTIR). It was noted that the MAPSO initiated by MMTBP showed a high carbon–carbon double bond conversion above 80% because of the existence of thiophenyl group which could generate more radicals from the photolysis reaction at the C? S bond. In addition, the thermal stability of the UV‐cured MAPSO were studied by thermogravimetric analysis (TGA), the result showed that the initial 5% mass loss (T 5%) and residual weight percent at 800 °C in nitrogen of the UV‐cured MAPSO initiated by MMTBP systems was 200 °C and 33.8%. Thus, this work provides a new perspective and efficient strategy to improve the polymerization degree of UV‐curable polysiloxanes with carbon–carbon double bonds. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1696–1705 相似文献
10.
Martina Sandholzer Monika Schuster Franz Varga Robert Liska Christian Slugovc 《Journal of polymer science. Part A, Polymer chemistry》2008,46(11):3648-3661
Nowadays, migration stability is one of the key features for photoinitiators used in radiation curable formulations, especially when the material is in contact with food or the human body. Herein, the synthesis and characterization of statistical copolymers with covalently bound eosin and/or ethyl dimethylamino benzoate units by ring opening metathesis polymerization is presented. The prepared compounds were tested as macroinitiators for the photopolymerization of acrylates aiming at an initiator/coinitiator system which combines good polymerization activity with improved migration stability. An acrylate modified eosin derivative which is incorporated into the polymer network during the photopolymerization reaction and, therefore, less likely to leak from the polymer compound was used as reference. Photoinitiating activities of low and high molecular weight initiators and coinitiators were investigated by photo‐DSC. Moreover, leakage studies and viability tests with osteoblast‐like cells were performed to proof the suitability of this concept. The use of polymeric eosin in combination with a low molecular weight coinitiator was found to be a good compromise when aiming at a photoinitiating system with sound performance and improved migration stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3648–3661, 2008 相似文献
11.
Synthesis and structure‐activity relationship of several aromatic ketone‐based two‐photon initiators
Zhiquan Li Marton Siklos Niklas Pucher Klaus Cicha Aliasghar Ajami Wolfgang Husinsky Arnulf Rosspeintner Eric Vauthey Georg Gescheidt Jürgen Stampfl Robert Liska 《Journal of polymer science. Part A, Polymer chemistry》2011,49(17):3688-3699
Several novel aromatic ketone‐based two‐photon initiators containing triple bonds and dialkylamino groups were synthesized and the structure‐activity relationships were evaluated. Branched alkyl chains were used at the terminal donor groups to improve the solubility in the multifunctional monomers. Because of the long conjugation length and good coplanarity, the evaluated initiators showed large two‐photon cross section values, while their fluorescence lifetimes and quantum yields strongly depend on the solvent polarity. All novel initiators exhibited high activity in terms of two‐photon‐induced microfabrication. This is especially true for fluorenone‐based derivatives, which displayed much broader processing windows than well‐known highly active initiators from the literature and commercially available initiators. While the new photoinitiators gave high reactivity in two‐photon‐induced photopolymerization at concentration as low as 0.1% wt, these compounds are surprisingly stable under one photon condition and nearly no photo initiation activity was found in classical photo DSC experiment. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
12.
The compounds 2‐thioxanthone‐thioacetic acid and 2‐(carboxymethoxy)thioxanthone, bimolecular photoinitiators for free radical polymerization, are synthesized and characterized. Their capability to act as initiators for the polymerization of methyl methacrylate was examined. The postulated mechanism is based on the intermolecular electron‐transfer reaction of the excited photoinitiator with the sulfur or oxygen atom of the ground state of the respective photoinitiator followed by decarboxylation. The resulting alkyl radicals initiate the polymerization.
Structures of the photoinitiators. 相似文献
13.
Julie Kirschner Mariem Bouzrati‐Zerelli Jean Pierre Fouassier Jean‐Michel Becht Joachim E. Klee Jacques Laleve 《Journal of polymer science. Part A, Polymer chemistry》2019,57(13):1420-1429
Silyl glyoxylates are proposed here as high‐performance photoinitiators (PIs) for the hybrid polymerization of cationic and radical monomers. Recently, silyl glyoxylates were reported as a new class of high‐performance Type I photoinitiators for free radical polymerization under air upon exposure to different near‐UV and blue LEDs. In this article, we report this new class of photoinitiators to initiate cationic polymerization in combination with an iodonium salt. This system can also be used to initiate simultaneously free radical and cationic polymerizations, for example, for the free radical/cationic hybrid polymerization and for the synthesis of interpenetrating polymer networks. The system silyl glyoxylate/iodonium exhibits excellent polymerization performances and exceptional bleaching properties compared to other well established photoinitiators (e.g., camphorquinone). Furthermore, a hybrid monomer is also introduced in this article (2‐vinyloxyethoxyethyl methacrylate [VEEM]) leading to a huge improvement of the mechanical properties of the final polymer through hybrid polymerization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1420–1429 相似文献
14.
Hakan Akat Burcin Gacal Demet Karaca Balta Nergis Arsu Yusuf Yagci 《Journal of polymer science. Part A, Polymer chemistry》2010,48(10):2109-2114
Novel water‐borne macrophotoinitiator containing thioxanthone (TX) end group was successfully synthesized by using Diels–Alder (DA) [4 + 2] click chemistry strategy. For this purpose, thioxanthone‐anthracene (TX‐A) and maleimide end‐functionalized poly(ethylene glycol) (PEG‐MI) were reacted in toluene at reflux temperature for 48 h. The final polymer (PEG‐TX) and the intermediates were characterized in detail by spectral analysis. PEG‐TX possesses absorption characteristics similar to the parent TX. The one‐component photoinitiating nature of the photointiator was demonstrated by photopolymeization of several hydrophilic vinyl monomers, such as acrylic acid, acrylamide, 2‐hydroxyethyl acrylate, and 1‐vinyl‐2‐pyrrolidone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2109–2114, 2010 相似文献
15.
Sinoj Abraham Jae Ho Choi Chang‐Sik Ha Il Kim 《Journal of polymer science. Part A, Polymer chemistry》2007,45(23):5559-5572
The synthesis of new octafunctional alkoxyamine initiators for nitroxide‐mediated radical polymerization (NMRP), by the derivatization of resorcinarene with nitroxide free radicals viz TEMPO and a freshly prepared phosphonylated nitroxide, is described. The efficiency of these initiators toward the controlled radical polymerization of styrene and tert‐butyl acrylate is investigated in detail. Linear analogues of these multifunctional initiators were also prepared to compare and evaluate their initiation efficiency. The favorable conditions for polymerization were optimized by varying the concentration of initiators and free nitroxides, reaction conditions, etc., to obtain well‐defined star polymers. Star polystyrene thus obtained were further used as macro‐initiator for the block copolymerization with tert‐butyl acrylate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5559–5572, 2007 相似文献
16.
Juan Chu Jin Chen Keda Zhang 《Journal of polymer science. Part A, Polymer chemistry》2004,42(8):1963-1969
A novel ligand, N,N,N′,N′,N″‐penta (methyl acrylate) diethylenetriamine (MA5‐DETA), was synthesized by the reaction of diethylenetriamine with methyl acrylate in almost quantitive yield. The polymerizations of methyl methacrylate with MA5‐DETA as the ligand and α,α‐dichlorotoluene (DCT) and ethyl 2‐bromoisobutyrate (2‐EBiB) as the initiators, respectively, under different conditions were examined. The polymerization with CuCl/MA5‐DETA/DCT was closely controlled in bulk and gave polymers with quite narrow molecular weight distributions (Mw/Mn's) of 1.16–1.29. The polymerization with the system CuBr/MA5‐DETA/EBiB in bulk gave high activity. However, the system was not well controlled and gave the polymers with Mw/Mn = 1.35–1.53. The solution polymerization in anisole with CuBr/MA5‐DETA/EBiB showed a better‐controlled nature. Moreover, the addition of CuBr2 into the aforementioned system can further improve its controllability. The Mw/Mn's of the resulting polymers ranged from 1.11 to 1.21. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1963–1969, 2004 相似文献
17.
Mohammad M. Khani Zaid M. Abbas Brian C. Benicewicz 《Journal of polymer science. Part A, Polymer chemistry》2017,55(9):1493-1501
The preparation of well‐defined polyisoprene‐grafted silica nanoparticles (PIP‐g‐SiO2 NPs) was investigated. Surface initiated reversible addition fragmentation chain transfer (SI‐RAFT) polymerization was used to polymerize isoprene from the surface of 15 nm silica NPs. A high temperature stable trithiocarbonate RAFT agent was anchored onto the surface of particles with controllable graft densities. The polymerization of isoprene mediated by silica anchored RAFT with different densities were investigated and compared to the polymerization mediated by free RAFT agents. The effects of different temperatures, initiators, and monomer feed ratios on the kinetics of the SI‐RAFT polymerization were also investigated. Using this technique, block copolymers of polyisoprene and polystyrene on the surface of silica particles were also prepared. The well‐defined synthesized PIP‐g‐SiO2 NPs were then mixed with a polyisoprene matrix which showed a good level of dispersion throughout the matrix. These tunable grafted particles have potential applications in the field of rubber nanocomposites. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1493–1501 相似文献
18.
Atsushi Sudo Hiroshi Yamashita Takeshi Endo 《Journal of polymer science. Part A, Polymer chemistry》2011,49(16):3631-3636
p‐Toluenesulfonic acid (TsOH) and several alkyl p‐toluenesulfonates, that is, methyl p‐toluenesulfonate (TsOMe), cyclohexyl p‐toluenesulfonate (TsOCH), and neopentyl p‐toluenesulfonate (TsONP), were evaluated as initiators for the ring‐opening polymerization of benzoxazines. TsOH and TsOMe were highly efficient initiators that induced the polymerization at 60 and 80 °C, respectively. In contrast, TsOCH and TsONP did not initiate the polymerization below 100 °C, while they induced the polymerization at elevated temperatures, 120 and 150 °C, respectively. When TsOCH was used as an initiator, the corresponding polymerization rate was comparable to that observed for the polymerization with using TsOH as an initiator. These results suggested that neutral TsOCH and TsONP can be regarded as “thermally latent initiators,” which underwent the thermal dissociation at the elevated temperatures to generate the corresponding alkyl cations and/or TsOH as the initiators of the polymerization. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011 相似文献
19.
Bernhard Seidl Kadiriye Kalinyaprak‐Icten Norbert Fuß Michael Hoefer Robert Liska 《Journal of polymer science. Part A, Polymer chemistry》2008,46(1):289-301
In continuation of our research on new chromophores for photoinitiators (PIs) we investigated a series of double and triple bond containing PIs based on benzophenone (BP), thioxanthone, benzil (BZ), benzildimethylketal (BDK), and hydroxyalkylphenone. UV‐Vis spectroscopy revealed an absorption shifted up to 50 nm to the visible range of the spectrum. With steady state photolysis experiments, the rates of decomposition (Rd) were determined. Compared to the commercially available reference PIs the Rd of the new PIs were nearly identical. By quenching reactions with 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), α‐cleavage was identified for Type I initiators. Generally, all new compounds are suitable as PI especially for longer wavelengths. Nevertheless it has to be noted that the PI concentration has to be selected carefully to achieve optimum reactivity. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 289–301, 2008 相似文献
20.
Yujing Hua James V. Crivello 《Journal of polymer science. Part A, Polymer chemistry》2000,38(19):3697-3709
A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000 相似文献