Structural deviations in poly(amidoamine) dendrimers: a MALDI-TOF MS analysis

A step-by-step synthesis/purification (CC, HILIC, HPLC) of poly(amidoamine) PAMAM dendrimers was performed. MALDI-TOF MS in the linear and reflectron mode was used to analyze the purified samples and byproduct samples of G0-G5 generations of the dendrimers up to the mass of 35 000 Da. DHB/fucose was found to give the best resolution, causing the least fragmentation of the samples. The precise mass number for the ideally branched dendrimers and their “structural errors” was obtained. The profile of the structural errors was established.     

Cinnamoyl shell‐modified poly(amidoamine) dendrimers

Poly(amidoamine)(PAMAM) dendrimers with a cinnamoyl shell were prepared by reacting full generation PAMAM dendrimers (G=3.0) with 2‐chloroethanol and cinnamoyl chloride, which resulted in densely packed polymerizable unsaturated groups on the periphery. The cinnamoyl shell of the dendrimers dimerized when irradiated under a UV light by using 5‐nitroacenaphthylene as an initiator in dilute dimethylformamide (DMF). FTIR, ¹H NMR, UV‐Vis, SEC, and a viscosity test certified that the photocycloaddition of the cinnamoyl shell of the dendrimers took place within the molecules with the disappearance of double bond signals in the FTIR. ¹H NMR spectra as well as the intrinsic viscosity and polydispersity value of the products both before and after irradiation showed no difference. It was further found that the cinnamoyl shell‐modified dendrimers possessed fluorescence property, and the fluorescence intensity became stronger when the shell was photocyclized under UV‐ irradiation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4147–4153, 2000     

Fragmentation of poly(amidoamine) dendrimers in matrix-assisted laser desorption

Fragmentation of different generations of poly(amidoamine) dendrimers was explored in five common MALDI matrices: 2,5-dihydroxybenzoic acid (DHB), 4-hydroxy-3-methoxycinnamic acid (FER), α-cyano-4-hydroxycinnamic acid (ACH), 2,4,6-trihydroxyacetophenone (THAP), and 3-hydroxypicolinic acid (HPA). Of these, DHB was the softest matrix and ACH produced significant fragment intensity already at MALDI threshold, FER and THAP being in between. HPA was not a convenient matrix for dendrimers and produced a specific fragmentation pattern. Fragmentation analysis was mainly concentrated on generation G1, which contains already all essential structural elements. Dendrimers showed complicated fragmentation behavior with multiple fragmentation channels in our MALDI experiments. The relative intensities of these channels depended selectively on choice of the matrix and showed dissimilar dependence on the laser pulse energy. This was attributed to different fragmentation mechanisms, due to different protonation pathways, occurring in the same MALDI plume. The fragmentation pathways were proposed for all observed fragmentation channels. All fragmentation sites of protonated ions were found to be directly attached to the protonation sites and the fragmentation was surplus charge driven in this sense. No charge remote fragmentation channels were detected. Cationized dendrimers showed higher stability than the protonated ions.     

Photodegradation of poly(amidoamine) dendrimers peripherally modified with 1,8-naphthalimide units

This paper presents the photophysical and photochemical characteristics of four new poly(amidoamine) dendrimers of zero and second generation whose periphery has been modified with 1,8-naphthalimide units. Nitro- and allylamino groups have been used as substitutents at the C-4 position of the 1,8-naphthalimide fluorophores. The discussion is focused on the photodegradation of the dendrimers in N,N-dimethylformamide and dioxan solutions. Investigations have shown that the photodegradation of the dendrimers with 4-nitro substituted 1,8-naphthalimide proceed with yellow colour development in the solvent while no colour changes followed the same process in dendrimers with allylamino group substituent. The results also show that the photostability of the dendrimers depends on their generation.     

Capillary electrophoresis of polycationic poly(amidoamine) dendrimers

Generation 2 to generation 5 poly(amidoamine) (PAMAM) dendrimers having different terminal functionalities were analyzed by capillary electrophoresis (CE). Polyacrylamide gel electrophoresis was also used to assess the composition of the individual generations for comparison with the CE results. Separation of PAMAMs can be accomplished by either using uncoated silica or silanized silica capillaries, although reproducibility is poor using the uncoated silica capillary. To improve run-to-run reproducibility, silanized capillary was used and various internal standards were also tested. Relative and normalized migration times of primary amine terminated PAMAM dendrimers were then determined using 2,3-diaminopyridine (2,3-DAP) as an internal standard. Using silanized capillaries and internal standards, the relative and normalized migration times are fully reproducible and comparable between runs. Apparent dimensionless electrophoretic mobilities were determined and the results were compared to theoretical calculations. It is concluded that for PAMAMs a complex separation mechanism has to be considered in CE, where the movement of the ions is due to the electric field, but the separation is rather the consequence of the adsorption/desorption equilibria on the capillary wall ("electrokinetic capillary chromatography"). The described method may be used for quality control and may serve as an effective technique to analyze polycationic PAMAM dendrimers and their derivatives with different surface modifications.     

Self‐assembly of a new class of amphiphilic poly(amidoamine) dendrimers and their electrochemical properties

Amphiphilic poly(amidoamine) (PAMAM) dendrimers consisting of a hydrophilic dendrimer core and hydrophobic aromatic dansyl or 1‐(naphthalenyl)‐2‐phenyldiazene (NPD) shells have been synthesized. These amphiphilic dendrimers from the zero generation to the third generation self‐assemble into vesicular aggregates in water. The self‐assembly behavior of these dendrimers strongly depends on their generations. The generation dependence has been further investigated by an exploration of their electrochemical properties. For the PAMAM–NPD aggregates, the photoisomerization process leads to a change in the aggregate size. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5512–5519, 2005     

Designing poly(amido amine) dendrimers containing core diversities by click chemistry of the propargyl focal point poly(amido amine) dendrons

General, fast, efficient, and inexpensive methods for the synthesis of poly (amido amine) (PAMAM) dendrimers having core diversities were elaborated. In all syntheses, the major step involved an inexpensive 1,3‐dipolar cycloaddition reaction between an alkyne and an azide in the presence of Cu(I) species, which is known as the best example of click chemistry. The propargyl‐functionalized PAMAM dendrons are obtained by the divergent approach using propargylamine as an alkyne‐focal point. Three core building blocks, 1,3,5‐tris(azidomethyl)benzene, N,N,N′,N′‐tetra(azidopropylamidoethyl)‐1,2‐diaminoethane, and 4,4′‐(3,5‐bis(azidopropyloxy)benzyloxy)bisphenyl, were designed and synthesized to serve as the azide functionalities for dendrimer growth via click reactions with the alkyne‐dendrons. These three building blocks were employed together with the propargyl‐functionalized PAMAM dendrons in a convergent strategy to synthesize three kinds of PAMAM dendrimers with different core units. This novel and pivotal strategy using an efficient click methodology provides the fast and efficient synthesis of the PAMAM dendrimers with the tailed made core units. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1083–1097, 2008     

CE of poly(amidoamine) succinamic acid dendrimers using a poly(vinyl alcohol)-coated capillary

Various generations (G1-G8) of negatively charged poly(amidoamine) (PAMAM) succinamic acid dendrimers (PAMAM-SAH) were analyzed by CE using a poly(vinyl alcohol)-coated capillary. Due to its excellent stability and osmotic flow-shielding effect, highly reproducible migration times were achieved for all generations of dendrimer (e.g., RSD for the migration times of G5 dendrimer was 0.6%). We also observed a reverse trend in migration times for the PAMAM-SAH dendrimers (i.e., higher generations migrated faster than lower generation dendrimers) compared to amine-terminated PAMAM dendrimers reported in the literature. This reversal in migration times was attributed to the difference in counterion binding around these negatively charged dendrimers. This reverse trend allowed a generational separation for lower generation (G1-G3) dendrimers. However, a sufficient resolution for the migration peaks of higher generations (G4-G5) in a mixture could not be achieved. This could be due to their nearly identical charge/mass ratio and dense molecular conformations. In addition, we show that dye-functionalized PAMAM-SAH dendrimers can also be analyzed with high reproducibility using this method.     

以枝形大分子聚酰胺-胺(PAMAM)为键合固定相的开管毛细管电色谱柱的制备及评价

用3-氨丙基三乙氧基硅烷(KH550)作偶联剂, 在毛细管内壁上逐步合成树枝形大分子聚酰胺-胺(PAMAM), 制得了1, 2和3代PAMAM键合的开管毛细管电色谱柱, 并对其性能进行了研究. 结果表明, 随着大分子代数的增加, 毛细管电渗流(EOF)逐步下降. 利用制得的1, 2和3代PAMAM修饰的开管毛细管电色谱柱对丙氨酸和脯氨酸的分离进行对比, 结果显示, 随着大分子PAMAM代数的增加, 分离度逐步增大, 丙氨酸和脯氨酸可在3代树枝状大分子PAMAM修饰的开管毛细管电色谱柱上达到基线分离. 采用非衍生化法和3代PAMAM修饰的开管毛细管电色谱柱成功地分析了精氨酸、 丙氨酸、 脯氨酸、 甲硫氨酸和组氨酸. 结果表明, 键合毛细管柱具有良好的重现性和稳定性.     

Electrophoretic mobility and molecular distribution studies of poly(amidoamine) dendrimers of defined charges

Generation 5 ethylenediamine (EDA)-cored poly(amidoamine) (PAMAM) dendrimers (E5, E denotes the EDA core and 5 the generation number) with different degrees of acetylation and carboxylation were synthesized and used as a model system to investigate the effect of charge and the influence of dendrimer surface modifications on electrophoretic mobility (EM) and molecular distribution. The surface-modified dendrimers were characterized by size-exclusion chromatography, 1H NMR, MALDI-TOF-MS, PAGE, and CE. The focus of our study was to determine how EM changes as a function of particle charge and molecular mass, and how the molecular distribution changes due to surface modifications. We demonstrate that partially modified dendrimers have much broader migration peaks than those of fully surface functionalized or unmodified E5 dendrimers due to variations in the substitution of individual dendrimer surfaces. EM decreased nonlinearly with increases in surface acetylation for both PAMAM acetamides and PAMAM succinamic acids, indicating a complex migration activity in CE separations that is not solely due to charge/mass ratio changes. These studies provide new insights into dendrimer properties under an electric field, as well as into the characterization of dendrimer-based materials being developed for medical applications.     

Chemical and ecotoxicological assessment of poly(amidoamine) dendrimers in the aquatic environment

Poly(amidoamine) (PAMAM) dendrimers are attracting great interest as a consequence of their unique properties as carriers of active molecules in aqueous media, as we expect their presence in the environment to be widespread in the future.In this article, we focus on the analytical methods to characterize and to determine these polymeric materials in waters and on their ecotoxicity for aquatic organisms. We review physical characterization techniques (e.g., light scattering, electron microscopy, atomic force microscopy) and analytical techniques, mainly based on liquid chromatography, so as to consider their main capabilities, advantages and drawbacks. We assessed the toxicity of certain PAMAM dendrimers for the green alga Pseudokirchneriella subcapitata by determining the EC₅₀ and correlating it with the ζ-potential.     

Vibrational spectra of the peroxotantalates (NH4)3[Ta(O2)4], K3[Ta(O2)4], Rb3[Ta(O2)4] and Cs3[Ta(O2)4] and the crystal structure of Rb3[Ta(O2)4]

The compounds (NH₄)₃[Ta(O₂)₄], K₃[Ta(O₂)₄], Rb₃[Ta(O₂)₄] and Cs₃[Ta(O₂)₄] have been prepared and investigated by X-ray powder methods as well as Raman- and IR-spectroscopy. In the case of Rb₃[Ta(O₂)₄] the structure has been solved from single crystal data. It is shown that all these compounds are isotypic and crystallize in the K₃[Cr(O₂)₄] type (SG , No. 121). The infrared- and Raman spectra (recorded on powdered samples) are discussed with respect to the internal vibrations of the peroxo-group and the dodecahedral [Ta(O₂)₄]³⁻ ion. Symmetry coordinates for the [Ta(O₂)₄]³⁻ ion are given from which the vibrational modes of the O-O stretching vibrations of the O₂²⁻ groups, the Ta-O stretching vibrations and the Ta-O bending vibrations are deduced.     

First-principles study of O2 adsorption and dissociation on the CuCr2O4 (100) surface

The adsorption and dissociation of molecular oxygen on spinel CuCr₂O₄ (100) surface were carried out by first-principles calculations based on density functional theory (DFT). The calculated results indicate that the Cr site is most favorable for atomic oxygen adsorption, with an adsorption energy of 402.8 kJ/mol. For molecular oxygen adsorption, there are three types of favorable interaction modes: O₂ forms bonds with the Cu site or O₂ binds to two Cr sites or O₂ interacts with both Cu and Cr sites simultaneously. The lowest activation energy (E_a = 35.4 kJ/mol) was found through exploring possible reaction pathways for O₂ dissociation. The relationship between E_a and reaction enthalpy (ΔH) for O₂ dissociation adsorption reactions fits Brønsted-Evans-Polanyi (BEP) behavior.     

Facile fabrication of a novel high performance CO2 separation membrane: Immobilization of poly(amidoamine) dendrimers in poly(ethylene glycol) networks

Poly(amidoamine) (PAMAM) dendrimers showed high CO₂ separation properties and were successfully immobilized in a poly(ethylene glycol) (PEG) network upon photopolymerization of PEG dimethacrylate. The PAMAM dendrimer incorporation ratio was readily controlled, and a stable self-standing membrane containing up to 75 wt.% PAMAM dendrimer was obtained. The CO₂ separation properties over smaller H₂ were investigated by changing the PAMAM dendrimer content or generation and CO₂ partial pressure (ΔPCO₂$\mathrm{\Delta }{P}_{\text{C}{\text{O}}_2}$) under atmospheric conditions. Especially, a polymeric membrane containing 50 wt.% PAMAM dendrimer (0th generation) exhibited an excellent CO₂/H₂ selectivity of 500 with CO₂ permeability of 2.74 × 10⁻¹⁴ m³(STP)m/(m² s Pa) or 3.65 × 10³ barrer (1 barrer = 7.5 × 10⁻¹⁸ m³(STP)m/(m² s Pa)) when a mixture gas (CO₂/H₂: 5/95 by vol.) was fed at 25 °C and 100 kPa with 80% relative humidity. This polymeric materials are promising for a novel CO₂ separation membrane.     

Dawson型磷钨杂多阴离子P2W18O626-的电化学性质和对O2还原的电催化作用

用循环伏安、交流伏安和交流阻抗法对Dawson型磷钨杂多阴离子P₂W₁₈O₆₂^6-的电化学性质进行了详细研究, 循环伏安结果显示, P₂W₁₈O₆₂^6-在pH 2.52的0.1 mol·L^-1 Na₂SO₄+NaHSO₄溶液中有两对可逆的单电子还原-氧化波和两对可逆的双电子还原-氧化波. 单电子波的峰电位和电流与溶液的pH无关, 双电子波的峰电位则随溶液pH的增加而负移, 峰电流降低, 表明双电子电极过程有H⁺参与, 其数目为2. 交流阻抗谱表明P₂W₁₈O₆₂^6-的电极过程完全受扩散控制, 实验测定其扩散系数(D_O)为2.5×10^-6 cm²·s^-1. 循环伏安结果表明P₂W₁₈O₆₂^6-的第III对波对O₂还原为H₂O₂具有显著的电催化作用, 催化效率约达300%. 将P₂W₁₈O₆₂^6-应用于PW₁₁O₃₉Fe(III)(H₂O)^4-构成的类电-芬顿过程, 使该过程对硝基苯的降解效率显著提高.     

Synthesis of poly(pyridylthioether) dendrimers incorporating a Fe2(CO)6 cluster core

New pyridylthioether-based dendrons bearing a thiol moiety at their focal point have been prepared by a convergent synthetic approach. These dendrons were readily attached to a Fe₂(CO)₆ core to generate two-directional dendritic molecules incorporating an iron-carbonyl cluster.     

Partial oxidation of ethane in H2/O2 fuel cell under mild conditions

The partial oxidation of ethane to ethanol and acetaldehyde in the H₂/O₂ fuel cell under mild conditions is reported. The reaction proceeds at the carbon gasdiffusion cathode in the presence of transition metal ions (Fe²⁺, Cu²⁺) at ambient pressure and temperature 343 K.     

Structure control within poly(amidoamine) dendrimers: size, shape and regio-chemical mimicry of globular proteins

This work describes the syntheses of a new poly(amidoamine) (PAMAM) dendrimer family possessing a disulfide function (cystamine) in its core. Traditional redox-chemistry associated with the disulfide core in these dendrimer structures, provides a versatile strategy for designing unique sizes, shapes and controlling the regio-disposition of chemical groups on the surface of these dendrimers. Various single site, sulfhydryl functionalized dendron reactants may be generated in situ, under standard reducing conditions (i.e. dithiothreitol (DTT)). Facile control of size, shape and chemical functionality placement involves covalent hybridization of these single point, sulfhydryl reactive dendron components. This is accomplished by re-oxidation in the presence of air, to yield generation/surface chemistry differentiated cross-over products which may be isolated by preparative thin layer or column chromatography. Differentiated cystamine core dendrimers derived from combination and permutation of lower generation (i.e. Gen.=0-3) sulfhydryl functionalized dendrons possessing amino, hydroxyl, acetamido or dansyl surface groups, were synthesized and isolated. They were characterized by a variety of methods including; ¹³C NMR, capillary electrophoresis (CE), gel electrophoresis (PAGE), thin layer chromatography (TLC) and electrospray (ES) or matrix assisted laser desorption ionization (MALDI-TOF) mass spectrometry. This general strategy has broad implications for the systematic size, shape and regio-chemical control of a wide range of dendritic nanostructures, many of which may be designed to mimic the sizes, shapes and regio specific chemo-domains observed for globular proteins.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.