Synthesis and properties of poly(isosorbide 2,5-furandicarboxylate-co-ε-caprolactone) copolyesters

Bio-based poly(isosorbide 2,5-furandicarboxylate-co-ε-caprolactone) (PIFCL) copolyesters were synthesized from 2,5-furandicarboxylic acid, isosorbide and ε-caprolactone. The obtained copolyesters were characterized by ¹H NMR, ¹³C NMR, intrinsic viscosity, GPC, DSC, TGA and tensile testing. The NMR characterization results confirmed the insertion of lactones units into poly(isosorbide 2,5-furandicarboxylate) (PIF) chains. All PIFCL copolyesters were amorphous with T_{D, 5%} higher than 300 °C. The glass transition temperatures of PIFCLs with FDCA molar ratio from 74% to 45% were within the range of 132.1 °C and 72.4 °C. Tensile testing revealed that introduction of ε-caprolactone into PIF chain imparted PIFCL with excellent mechanical performance, typically, PIFCL polyseter with FDCA molar ratio of 45% had a Young's modulus 858 ± 92 MPa, a tensile strength 44 ± 4 MPa and an elongation at break 480 ± 45%.     

Synthesis and characterization of biodegradable pH-sensitive hydrogels based on poly(?-caprolactone), methacrylic acid, and poly(ethylene glycol)

In this work, a novel biodegradable pH-sensitive hydrogel based on poly(?-caprolactone) (PCL), methoxpoly(ethylene glycol) (MPEG) and methacrylic acid (MAA) was prepared by UV-initiated free radical polymerization. The resulting macromonomers and hydrogels were characterized by FTIR and/or ¹H NMR. Swelling behaviour and pH sensitivity of the hydrogels were studied in detail. With increase in pH of aqueous medium from 1.2 to 7.2, swelling ratio of the hydrogels increased accordingly. The hydrolytic degradation behaviour was also investigated. The prepared biodegradable pH-sensitive hydrogel based on PCL, MPEG, and MAA might have great potential application in smart drug delivery system.     

Synthesis and biodegradation of poly(2-pyrrolidone-co-ε-caprolactone)s

Copolyesteramides of 2-pyrrolidone with ε-caprolactone were synthesized by ring-opening copolymerization. The copolymers were random-like and their melting temperature and heat of fusion were dependent on the polymer composition. Biodegradation by a polyamide 4 (PA4) degrading microorganism showed rapid degradation in the region of amide-rich polymer composition. On the contrary, enzymatic hydrolysis using a lipase resulted in a different tendency, that is, ester-rich copolymers hydrolyzed rapidly. Activated sludge makes copolymers degrade to CO₂ in wide polymer composition ratio. Copolyesteramides are expected to be applied as an environmentally-friendly plastics or bioabsorbable polymers in medical fields.     

Thermal,mechanical, and topographical evaluation of nonstoichiometric α-cyclodextrin/poly(ε-caprolactone) pseudorotaxane nucleated poly(ε-caprolactone) composite films

Three pseudorotaxanes (PpR) comprised of poly (ε-caprolactone) (PCL) and α-cyclodextrin (α-CD) with varying stoichiometric ratios were synthesized and characterized. Wide-angle X-ray diffraction (WAXD) and thermogravimetric (TGA) analyses provided conclusive evidence for complexation between the guest PCL and host α-CD. The as-synthesized and characterized PpRs were used at 10 and 20% concentrations as nucleants to promote the bulk PCL crystallization in composite films. Both WAXD and TGA provided evidence for intact PpR structures in the composite films. Isothermal differential scanning calorimetric (I-DSC) analyses, performed at various crystallization temperatures demonstrated significant differences in the crystallization patterns among the composite films. In addition, I-DSC analyses showed higher Avrami constant values (n) in the PpR-nucleated composite PCL films (n ~ 3), indicating 3-dimensional crystal growth. In the case of neat PCL films, however, lower n values indicated crystal growth in 1-dimensions or 2-dimensions. Moreover, atomic force microscopic analyses showed large crests and pits in PpR-nucleated PCL composites, with irregular morphologies leading to higher surface roughness. To the contrary, the crests and pits were much smaller in the neat PCL films, resulting in lower surface roughness values. Finally, mechanical testing revealed higher tensile strength for PpR-nucleated PCL composites films, demonstrating larger load bearing capabilities. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1529–1537     

Synthesis and characterization of calixarene-based poly(ε-caprolactone) stars catalyzed by yttrium complex

Two calixarene derivatives (2a, 2b) have been synthesized and used as macro-initiators to prepare star-shaped poly(ε-caprolactone)s (SPCLs) via controlled ringopening polymerization of ε-caprolactone in the presence of yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃]. The molecular weight of SPCLs was characterized by end group ¹H-NMR analyses and size-exclusion chromatography (SEC). The results indicate that SPCLs based on a calix[4]arene derivative (2a) are well-defined four-arm star polymers with reasonably narrow molecular weight distributions in the given molecular weight range, while SPCLs based on a calix[6]arene derivative (2b) are star polymers with not so defined structures. Differential scanning calorimetry (DSC) analyses suggest that the maximal melting point, the crystallization temperature and the degree of crystallinity of SPCLs increases with the increasing molecular weight and are lower than those of the liner poly(ε-caprolactone) (LPCL) counterpart. Furthermore, polarized optical microscopy (POM) indicates that SPCL exhibits irregular spherulites with poor morphology and slower crystallization rate, whereas LPCL shows fast crystallization rate and good spherulitic morphology. __________ Translated from Acta Polymerica Sinica, 2007, 10: 967–973 [译自:高分子学报]     

Synthesis and evaluation of triazole-linked poly(ε-caprolactone)-graft-poly(2-methyl-2-oxazoline) copolymers as potential drug carriers

Well-defined graft copolymers were obtained using a copper-catalysed azide-alkyne Huisgen's cycloaddition click reaction from both biocompatible and non-toxic poly(ε-caprolactone) and poly(2-methyl-2-oxazoline) homopolymers. Resulting amphiphilic copolymers proved to form micelles that could be used as potential drug carriers.     

Enhanced photodegradation of TiO2-containing poly(ε-caprolactone)/poly(lactic acid) blends

The calamitous accumulation of plastic waste in the environment, especially single-use disposables, calls for new approaches to materials design. One method to address the persistence of plastics beyond their intended use is to impart them with functionalities that will either allow for their recyclability or their degradation to basic natural components. This work focuses on the fabrication of photodegradable polyester blends and investigates the impact of compatibilization on photodegradation rates. Specifically, we blended poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) polymers by (reactive) extrusion in the presence or absence of dicumyl peroxide (DCP), a radical generator, and titanium dioxide (TiO₂), an inorganic photocatalyst. We examined the effects of DCP and TiO₂ loadings as well as copolymer composition on the thermomechanical properties, photodegradability, and morphology. We found that the inclusion of TiO₂ dramatically increased flexural moduli and photodegradation rates in both dry and wet conditions, while reactive compatibilization had little effect of the tested properties. This simple and scalable approach is promising to fabricate materials that can readily photodegrade.     

Synthesis and micellar characterization of thermosensitive amphiphilic poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) block copolymers

Poly(ε-caprolactone)-b-poly(N-vinylcaprolactam) (PCL-b-PVCL) block copolymers were synthesized as new biocompatible, thermosensitive, amphiphilic block polymers by a combination of ring-opening polymerization and reversible addition–fragmentation chain transfer (RAFT) polymerization, and their thermosensitive micellar behavior was examined. The PCL macro-chain-transfer agent was first synthesized by converting the end group of PCL-OH to O-ethyl xanthate, which was subsequently used for the RAFT polymerization of N-vinylcaprolactam. The critical micelle concentration of PCL-b-PVCL (M _n,NMR?=?56,300?g/mol, polydispersity index?=?1.18) was 0.026?mg/mL. The mean diameter of the PCL-b-PVCL micelles determined by transmission electron microscopy was 55?±?25?nm. The PCL-b-PVCL micelles exhibited repetitive aggregation and dispersion during reversible cooling and heating cycles between 20 and 40?°C due to the thermosensitive behavior of the PVCL shell. Overall, the PCL-b-PVCL block copolymers have potential applications in thermosensitive drug delivery applications.     

Controlled-release and antibacterial studies of doxycycline-loaded poly(ε-caprolactone) microspheres

The objective of the present study is to achieve doxycycline’s maximum therapeutic efficacy. Doxycycline-loaded poly(ε-caprolactone) microspheres were prepared by water-in-oil-in-water (w/o/w) double emulsion solvent evaporation technique with different formulation variables such as concentrations of drug and polymer. The effects of these variables on surface morphology, particle size distribution, encapsulation efficiency, and in vitro release behavior were examined. To observe the nature of microspheres, X-ray diffraction studies were carried out. The release data obtained were determined using various kinetic models and Korsmeyer–Peppas model showed an acceptable regression value for all compositions. Antibacterial efficiency of doxycycline-loaded poly(ε-caprolactone) microspheres were assessed by determining Minimum Inhibition Concentration (MIC) by standard tube dilution method against four standard pathogenic strains. The in vitro drug release studies were carried out in phosphate buffer solution (pH 7.2). The results showed marked retardation of doxycycline release and higher percentage of polymer gave longer drug release profile. This may definitely provide a useful controlled-release drug therapy and also prove to be effective over a long period of time (76 h).     

Synthesis and Antibacterial Activity of Selenium-functionalized Poly(ε-caprolactone)

A selenium-functionalizedε-caprolactone was synthesized by introducing a phenyl selenide group at the 7-position.A polymer was obtained through the ring-opening polymerization of this monomer in a base/thiourea binary organocatalytic system.A living polymerization process was achieved under mild conditions.The resulting polymers had a controlled molecular weight with a narrow molecular weight distributions and high end-group fidelity.Random copolymers could be obtained by copolymerizing this monomer withε-caprolactone.The thermal degradation temperature of the obtained copolymers decreased with the increasing molar ratio of selenide functionalized monomer in copolymers,while the glass transition temperature increased.In addition,the phenyl selenide side group could be further modified to a polyselenonium salt,which resulted in a polymer with good antibacterial properties.The survival rate of E.coli and S.aureus was only 9%with a polymer concentration of 62.5μg/mL.     

Morphology and thermal degradation studies of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler

The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blend nanocomposites with small amounts of TiO₂ nanoparticles were investigated. The nanoparticles were mostly located in the PLA phase, with good dispersion of individual particles, although significant aggregation was also visible. The thermal stability and degradation behaviour of the different samples were studied using thermogravimetric analysis (TGA) and TGA-Fourier-transform infrared (FTIR) spectroscopy. Neat PCL showed better thermal stability than PLA, but the degradation kinetics revealed that PLA had a higher activation energy of degradation than PCL, indicating its degradation rate more strongly depends on temperature, probably because of a more complex degradation mechanism based on chain scission and re-formation. Blending of PLA and PCL reduced the thermal stabilities of both polymers, but the presence of TiO₂ nanoparticles improved their thermal stability. The nanoparticles also influenced the volatilization of the degradation products from the blend, acted as degradation catalyst and/or retarded the escape of volatile degradation products.     

Purification, cloning and expression of an Aspergillus niger lipase for degradation of poly(lactic acid) and poly(ε-caprolactone)

A lipase from Aspergillus niger MTCC 2594 was purified 53.8-fold to homogeneity by hydrophobic interaction chromatography using octyl sepharose and the enzyme showed two protein bands with apparent molecular mass of 35 and 37 kDa respectively. The lipase exhibited maximum activity at pH 7.0 and 37 °C and was stable between pH 4.0 and 10.0 and temperatures up to 50 °C. The values of K_m and V_max were 3.83 mM and 32.21 μmol/min/mg respectively, using olive oil as substrate. Lipase encoding gene, lipA, coded for 297 amino acid residues with conserved pentapeptide sequence, G-H-S-L-G, was cloned and expressed in Pichia pastoris. Although lipA showed high homology with the known Aspergillus lipases, it exhibited differences in putative lid domain. Both native and recombinant lipases have potential for degradation of poly(lactic acid) and poly(ε-caprolactone), and the present study will serve as a baseline of initial studies for its exploitation in polymer degradation.     

Competition of phase dissolution and crystallization in poly(ε-caprolactone)/poly(styrene-co-acrylonitrile) blend

Blend of poly(ε-caprolactone) (PCL) and poly(styrene-co-acrylonitrile) (SAN) containing 27.5 wt% of acrylonitrile was studied. The PCL/SAN blend having LCST (lower critical solution temperature) phase boundary above the melting point T_m of PCL offered an excellent opportunity to investigate the competition of liquid-solid phase transition (crystallization) and liquid-liquid phase transition (phase dissolution). A blend with the critical composition (80/20 PCL/SAN) underwent a temperature-jump above LCST to proceed spinodal decomposition, yielding a regularly phase-separated structure (SD structure). Then, it was quenched to the temperatures below T_m at which both the crystallization and the phase dissolution could occur. By transmission electron microscopy it was found that during isothermal annealing after quenching to high temperatures close to T_m (e.g. 51 °C), the SD structure gradually disappeared, and then the crystallization started from a single-phase mixture to yield normal crystalline structure similar to that of a neat crystalline polymer. At lower temperatures (e.g. 40 °C), crystallization quickly occurred and the SD structure was preserved, implying that the crystallization prevailed over the dissolution yielding a bi-continuous structure consisting of amorphous (SAN-rich) and crystalline (PCL-rich) regions. At intermediate temperatures (e.g. 45 °C), the phase dissolution competed with the crystallization, resulting in a bi-continuous structure with longer periodic distance and a broad boundary having a gradient in composition of amorphous region between PCL crystal lamellae. Light-scattering analysis quantitatively revealed a competition of the crystallization and the phase dissolution in terms of the crystallization rate (from H_v scattering) and the apparent diffusion coefficient for dissolution (from V_v scattering).     

Synthesis of poly(ε-caprolactone) diols and EO-CL block copolymers and their characterization by liquid chromatography and MALDI-TOF-MS

Polymers of ε-caprolactone were synthesized by microwave-assisted polymerization initiated with polyethylene glycols (PEG 200 and PEG 300) and monodisperse diols (mono-, di-, tri-, tetra- and hexaethylene glycol) and tin octoate as catalyst. These polymers were characterized by different chromatographic techniques (SEC, LAC and LCCC) and MALDI-TOF-MS. A comparison with commercially available polycaprolactone diols with molecular weight 530 and 830 showed that the new polymers had a much higher content of triblock structures, while the commercial samples contained considerable amounts of diblocks.     

Synthesis and characterization of organic–inorganic macrocyclic molecular brushes with poly(ε-caprolactone) side chains

In this work, we reported the synthesis of a dodecahydroxyl-functionalized macrocyclic oligomeric silsesquioxane (MOSS). The novel 24-membered hydroxyl-functionalized MOSS was employed as a macroinitiator for the ring-opening polymerization of ε-caprolactone (CL) and the organic–inorganic macrocyclic molecular brushes with poly(ε-caprolactone) (PCL) side chains were successfully synthesized. The organic–inorganic macrocyclic molecular brushes were characterized by means of nuclear magnetic resonance spectroscopy (NMR) and gel permeation chromatography (GPC). The results of wide angle X-ray diffraction (XRD) indicate that the architecture of the organic–inorganic macrocyclic molecular brushes did not alter the structure of PCL crystals. Differential scanning calorimetry (DSC) shows that the architecture of organic–inorganic macrocyclic molecular brushes significantly affected the rearrangement of PCL crystals. Compared to linear PCL, the organic–inorganic macrocyclic molecular brushes possessed the improved thermal stability in terms of the temperatures at the maximum of degradation rate and the yields of degradation residues.     

Anionically prepared poly(ε-caprolactam-co-ε-caprolactone) and poly(ε-caprolactam-co-δ-valerolactone) copolymers: Thermal and mechanical properties

Thermal and representative physico-mechanical properties of newly prepared poly[(ε-caprolactam)-co-(ε-caprolactone)] and poly[(ε-caprolactam)-co-(δ-valerolactone)] copolymers were studied. The copolymers were synthesized by anionic polymerization of ε-caprolactam activated by isocyanate end-capped oligomeric aliphatic polyesters designated as the macroactivators (MAs). Type, concentration and molecular weight of the MAs were varied, which resulted in copolymers with different structure and properties. The impact of the new MAs used in this study on the glass transition temperature and the melting temperature of poly-ε-caprolactam was investigated by DSC. DMTA was used to analyze the effect of copolymerization on the storage modulus (E^′) and tan δ of poly-ε-caprolactam. Conventional and high-resolution TGA data revealed that all the synthesized polyesteramides possess good thermal stability. Mechanical properties were studied by notched impact and tensile testing. According to the experimental data the impact toughness increase with the MA content, being six time higher compared to the poly(ε-caprolactam) in the best situation. Water absorption was also considered in relation to the composition of the copolymers.     

A facile synthesis of hydrophilic poly(ε-caprolactone)-based poly(ether-ester-amide)s

Segmented poly(ether-ester-amide)s, (PEEA)s, of controlled hydrophilicity degree, based on poly(ε-caprolactone) (PCL), were synthesized according to a facile two-step procedure using α,ω-dihydroxy oligomeric PCL, 4,7,10-trioxa-1,13-tridecanediamine and macromers prepared from poly(ethylene glycol)s and adipoyl chloride. The PEEAs showed M _n values in the range 5–11.5 kDa. A PCL-type crystallinity was found by WAXS. DSC indicated T_m values (49–51 °C) close to that of PCL macromer. Single glass transitions were observed both by DSC and DMTA techniques and the T_g values (−58–−50 °C by DSC) were slightly higher than that of PCL. The water uptake was in the range 4.8–26.0 wt.-% depending on the length of the poly(ethylene glycol) segment.

Monomers used to prepare the PEEAs.     

Melting of poly(ε-caprolactone) studied by step-heating calorimetry

This study demonstrates that the step-heating calorimetry, which is a kind of temperature-modulated differential scanning calorimetry, can provide valuable information on the polymer melting. Time-dependent heat flow due to the melting of lamellar crystallites in a narrow range of thickness can be directly observed, from which thickness distribution of lamellar crystallites and thickness dependence of the melting kinetics are deduced. A sample of poly(ε-caprolactone) was used as a model material of semi-crystalline polymer, which has high crystallinity (0.79) so that no recrystallization and/or reorganization occur during melting in the step-heating scan. It was revealed that superheating dependence of the melting rate coefficient increases with increasing lamellar thickness, which may be attributed to variation of the fold surface roughness with respect to lamellar thickness. Analysis based on the cylindrical nucleation model revealed much lower free energy values of lateral surface than that evaluated from crystallization behavior, suggesting that the nucleus for melting is more stable than that for crystallization.     

Development of orientation during electrospinning of fibres of poly(ε-caprolactone)

We explore the influence of a rotating collector on the internal structure of poly(ε-caprolactone) fibres electrospun from a solution in dichloroethane. We find that above a threshold collector speed, the mean fibre diameter reduces as the speed increases and the fibres are further extended. Small-angle and wide-angle X-ray scattering techniques show a preferred orientation of the lamellar crystals normal to the fibre axis which increases with collector speed to a maximum and then reduces. We have separated out the processes of fibre alignment on the collector and the orientation of crystals within the fibres. There are several stages to this behaviour which correspond to the situations (a) where the collector speed is slower than the fibre spinning rate, (b) the fibre is mechanically extended by the rotating collector and (c) where the deformation leads to fibre fracture. The mechanical deformation leads to a development of preferred orientation with extension which is similar to the prediction of the pseudo-affine deformation model and suggests that the deformation takes place during the spinning process after the crystals have formed.