Linear low‐density polyethylene nanocomposites by in situ polymerization using a zirconium‐nickel tandem catalyst system

A series of linear low‐density polyethylene (LLDPE) nanocomposites containing different types of nanofiller (TiO₂, MWCNT, expanded graphite, and boehmite) were prepared by in situ polymerization using a tandem catalyst system composed of {Tp^Ms}NiCl ( 1 ) and Cp₂ZrCl₂ ( 2 ), and analyzed by differential scanning calorimetry, dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). Based on these analyses, the filler content varied from 1.30 to 1.80 wt %. The melting temperatures and degree of crystallinity of the LLDPE nanocomposites were comparable to those of neat LLDPE. The presence of MWCNT as well as boehmite nucleated the LLDPE crystallization, as indicated by the increased crystallization temperature. The DMA results showed that the presence of TiO₂, EG, and CAM 9080 in the LLDPE matrix yielded nanocomposites with relatively inferior mechanical properties compared to neat LLDPE, suggesting heterogeneous distribution of these nanofillers into the polymer matrix and/or the formation of nanoparticle aggregates, which was confirmed by TEM. However, substantial improvement in the storage modulus was achieved by increasing the sonication time. The highest storage modulus was obtained using MWCNT (1.30 wt %). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3506–3512     

Thermal Degradation Kinetics and Modeling Study of Ultra High Molecular Weight Polyethylene (UHMWP)/Graphene Nanocomposite

The incorporation of nanofillers such as graphene into polymers has shown significant improvements in mechanical characteristics, thermal stability, and conductivity of resulting polymeric nanocomposites. To this aim, the influence of incorporation of graphene nanosheets into ultra-high molecular weight polyethylene (UHMWPE) on the thermal behavior and degradation kinetics of UHMWPE/graphene nanocomposites was investigated. Scanning electron microscopy (SEM) analysis revealed that graphene nanosheets were uniformly spread throughout the UHMWPE’s molecular chains. X-Ray Diffraction (XRD) data posited that the morphology of dispersed graphene sheets in UHMWPE was exfoliated. Non-isothermal differential scanning calorimetry (DSC) studies identified a more pronounced increase in melting temperatures and latent heat of fusions in nanocomposites compared to UHMWPE at lower concentrations of graphene. Thermogravimetric analysis (TGA) and derivative thermogravimetric (DTG) revealed that UHMWPE’s thermal stability has been improved via incorporating graphene nanosheets. Further, degradation kinetics of neat polymer and nanocomposites have been modeled using equations such as Friedman, Ozawa–Flynn–Wall (OFW), Kissinger, and Augis and Bennett’s. The "Model-Fitting Method” showed that the auto-catalytic nth-order mechanism provided a highly consistent and appropriate fit to describe the degradation mechanism of UHMWPE and its graphene nanocomposites. In addition, the calculated activation energy (E_a) of thermal degradation was enhanced by an increase in graphene concentration up to 2.1 wt.%, followed by a decrease in higher graphene content.     

Effect of new melamine-terephthaldehyde resin modified graphene oxide on thermal and mechanical properties of PVC

In this study a new melamine-terephthaldehyde resin modified graphene oxide was synthesized and used as a reinforcement of poly(vinyl chloride) (PVC). Characterization, morphology, thermal and mechanical properties of the nanocomposites were examined by means of attenuated total reflectance-Fourier transform infrared spectroscopy, X-ray diffraction, field emission-scanning electron microscopy, thermogravimetric analysis, differential scanning calorimeter and tensile properties. The first hydrochloric acid releasing data of poly(vinyl chloride) was removed by incorporation of the modified graphene oxide as compare to the neat polymer. The temperatures at 2 wt% losses, main decomposition temperatures, maximum decomposition temperatures, also shift to higher temperature in the corresponding nanocomposites as compared to the neat PVC. The tensile strength and elongation at break of the nanocomposite films was increased as compared to the neat PVC. The interesting results in crystallinity of PVC were observed with adding 5 wt% of the modified graphene oxide.     

Structure and properties of polyamide‐6/vermiculite nanocomposites prepared by direct melt compounding

Polyamide‐6 (PA6)/vermiculite nanocomposites were fabricated through the direct melt compounding of maleic anhydride‐modified vermiculite (MAV) with PA6 in a twin‐screw extruder followed by injection molding. The structure and morphology of the nanocomposites were determined by X‐ray diffraction and scanning and transmission electron microscopy techniques. The results revealed the formation of intercalated and exfoliated vermiculite platelets in the PA6 matrix. Tensile measurement showed that the tensile modulus and strength of the nanocomposites tended to increase with increasing vermiculite content. The thermal properties of the nanocomposites were determined by dynamic mechanical analysis, differential scanning calorimetry, and thermogravimetry measurements. The storage modulus of the PA6–MAV nanocomposites increased to almost twice that of the neat PA6. The thermal stability of the nanocomposites increased dramatically, and this was associated with the addition of vermiculite. The effect of the addition of maleic anhydride on the formation of the PA6–vermiculite nanocomposites was examined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2860–2870, 2002     

聚丙烯/多壁碳纳米管复合材料的热性能和流变性能

用熔融共混法制备了聚丙烯多壁碳纳米管(PP MWNTs)复合材料,TGA研究表明在氮气气氛下碳纳米管显著增加了聚丙烯基体的热稳定性.3wt%MWNTs可使PP热分解起始温度提高44℃.非等温结晶研究表明MWNTs对PP基体的结晶行为没有明显的影响.流变测试结果表明PP MWNTs复合材料的储能模量G′和损耗模量G″随着MWNTs含量增加逐渐增大.1wt%MWNTs的PP聚合物的零剪切粘度最低,5wt%MWNTs的PP聚合物的零剪切粘度最高,PP和3wt%MWNTs的PP纳米聚合物的零剪切粘度居于二者之间,随着频率的增加,剪切稀化作用越来越明显,呈现出假塑性流体行为.含5wt%MWNTs的PP复合材料的体积和表面电阻率与纯PP相比分别下降了9个和4个数量级,表明少量的MWNTs可以显著改变PP的电学性能.     

Nanofibrillated cellulose (NFC) reinforced polyvinyl alcohol (PVOH) nanocomposites: properties, solubility of carbon dioxide, and foaming

Polyvinyl alcohol (PVOH) and its nanofibrillated cellulose (NFC) reinforced nanocomposites were produced and foamed and its properties—such as the dynamic mechanical properties, crystallization behavior, and solubility of carbon dioxide (CO₂)—were evaluated. PVOH was mixed with an NFC fiber suspension in water followed by casting. Transmission electron microscopy (TEM) images, as well as the optical transparency of the films, revealed that the NFC fibers dispersed well in the resulting PVOH/NFC nanocomposites. Adding NFC increased the tensile modulus of the PVOH/NFC nanocomposites nearly threefold. Differential scanning calorimetry (DSC) analysis showed that the NFC served as a nucleating agent, promoting the early onset of crystallization. However, high NFC content also led to greater thermal degradation of the PVOH matrix. PVOH/NFC nanocomposites were sensitive to moisture content and dynamic mechanical analysis (DMA) tests showed that, at room temperature, the storage modulus increased with decreasing moisture content. The solubility of CO₂ in the PVOH/NFC nanocomposites depended on their moisture content and decreased with the addition of NFC. Moreover, the desorption diffusivity increased as more NFC was added. Finally, the foaming behavior of the PVOH/NFC nanocomposites was studied using CO₂ and/or water as the physical foaming agent(s) in a batch foaming process. Only samples with a high moisture content were able to foam with CO₂. Furthermore, the PVOH/NFC nanocomposites exhibited finer and more anisotropic cell morphologies than the neat PVOH films. In the absence of moisture, no foaming was observed in the CO₂-saturated neat PVOH or PVOH/NFC nanocomposite samples.     

Preparation and properties of 3-aminopropyltriethoxysilane functionalized graphene/polyurethane nanocomposite coatings

Silicone-modified graphene was successfully synthesized by treating graphene oxide with 3-aminopropyltriethoxysilane (AMEO) and then reduced by hydrazine hydrate. Subsequently, the AMEO-functionalized graphene was incorporated into polyurethane (PU) matrix to prepare AMEO-functionalized graphene/PU nanocomposite coatings. The functionalized graphene could disperse homogenously by means of a covalent connection with PU. AMEO-functionalized graphene (AFG)-reinforced PU nanocomposite coatings showed more excellent mechanical and thermal properties than those of pure PU. A 227 % increase in tensile strength and a 71.7 % improvement of elongation at break were obtained by addition 0.2 wt% of AFG. Meanwhile, thermogravimetric analysis reveals that thermal degradation temperature was enhanced almost 50 °C higher than that of neat PU, and differential scanning calorimetry analysis demonstrates that glass transition temperature decreased by around 9 °C. The thermal conductivity of AFG/PU nanocomposite coatings also increased by 40 % at low AFG loadings of 0.2 wt%.     

In situ Synthesis of Poly(methyl methacrylate)/Graphene Oxide Nanocomposites Using Thermal-initiated and Graphene Oxide-initiated Polymerization

A facile and cost-effective method to prepare poly(methyl methacrylate) (PMMA)/graphene oxide (GO) nanocomposites was developed by in situ polymerization. By using thermal-initiated and GO-initiated polymerization of methyl methacrylate (MMA), no extra radical initiator was added during the reaction. Without any pre-functionalization of GO, PMMA chains were covalently bonded to its surface, which was confirmed by Fourier-transform infrared, atomic force microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy investigations. TGA analysis showed that the mass ratio of grafted PMMA and GO was as high as 1.7. Transmission electron microscopy and X-ray powder diffraction investigations demonstrated that the grafting of PMMA chains to GO surfaces resulted in homogeneous dispersion of GO sheets in PMMA matrix, which led to a commendable performance on its mechanical and thermal properties. Dynamic mechanical analysis showed that, at a loading level of just 0.5 wt% for the nanocomposites, the storage modulus of the nanocomposites was improved 14%, and the glass transition temperature was increased 12°C in comparison with that of neat PMMA. Thermogravimetric analysis showed that the onset degradation temperature of the nanocomposites was increased 13°C with a GO content of 0.25 wt%.     

A novel phosphorus-containing copolyester/montmorillonite nanocomposites with improved flame retardancy

A novel phosphorus-containing flame-retardant copolyester/montmorillonite nanocomposite (PET-co-HPPPA/O-MMT) was synthesized by the in situ intercalation polycondensation of terephthalic acid, ethylene glycol, and 2-carboxyethyl(phenylphosphinic) acid (HPPPA) with montmorillonite (O-MMT). The morphology was characterized by wide-angle X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The effects of organoclay on the thermal properties and melting behaviors of the nanocomposites were investigated by thermogravimetric analysis and differential scanning calorimetry. The flammability of the nanocomposites was characterized by the limiting oxygen index test and the UL-94 vertical test. The results showed that a small amount of organoclay was able to improve the thermal stabilities and the flame retardancy of PET-co-HPPPA copolyesters, and however there was no significant increase in the melting points of nanocomposites when the content of diethylene glycol was controlled as a certain value. The overall crystallization rate of the nanocomposites is greater than that of neat copolyester. The nanocomposites have better flame retardancy than PET-co-HPPPA.     

Covalent bonded polymer–graphene nanocomposites

This report describes a new route to covalently bonded polymer–graphene nanocomposites and the subsequent enhancement in thermal and mechanical properties of the resultant nanocomposites. At first, the graphite is oxidized by the modified Hummers method followed by functionalization with Octadecylamine (ODA). The ODA functionalized graphite oxides are reacted with methacryloyl chloride to incorporate polymerizable ? C?C? functionality at the nanographene platelet surfaces, which were subsequently employed in in situ polymerization of methylmethacrylate to obtain covalently bonded poly(methyl methacrylate) (PMMA)–graphene nanocomposites. The obtained nanocomposites show significant enhancement in thermal and mechanical properties compared with neat PMMA. Thus, even with 0.5 wt % graphene nanosheets, the T_g increased from 119 °C for neat PMMA to 131 °C for PMMA–graphene nanocomposite, and the respective storage modulus increased from 1.29 to 2 GPa. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4262–4267, 2010     

Melt blending of ethylene‐vinyl alcohol copolymer/clay nanocomposites: Effect of the clay type and processing conditions

Ethylene‐vinyl alcohol copolymer (EVOH)/clay nanocomposites were prepared via dynamic melt blending. The effect of the processing parameters on blends containing two clay types in different amounts was examined. The blends were characterized with a Brabender plastograph and capillary rheometer, differential scanning calorimetry, dynamic mechanical thermal analysis (DMTA), X‐ray diffraction (XRD), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). XRD showed advanced EVOH intercalation within the galleries, whereas TEM images indicated exfoliation, thereby complementing the XRD data. A dilution process with EVOH and clay treatment in an ultrasonic bath before melt blending did not add to the intercalation level. Different trends were observed for the EVOHs containing two different clay treatments, one claimed to be treated for EVOH and the other for amine‐cured epoxy. They reflected the differences in the amounts of the strongly interacting polymer for the two nanocomposites. Thermal analysis showed that the melting temperature, crystallization temperature, and heat of fusion of the EVOH matrix sharply decreased with both increasing clay content and processing times. Significantly higher viscosity levels were obtained for the blends in comparison with those of the neat polymer. The DMTA spectra showed higher glass‐transition temperatures for the nanocomposites in comparison with those of the neat EVOH. However, at high clay loadings, the glass‐transition temperature remained constant, presumably because of an adverse plasticizing effect of the low moleculared mass onium ions treating the clays. The storage modulus improved when clay treated for EVOH was used, and it deteriorated when amine‐cured epoxy clay was incorporated, except for the sonicated clay. TGA results showed significant improvements in the blends' thermal stability in comparison with that of the neat EVOH, which, according to TEM, was greater for the intercalated structures rather than for exfoliated ones. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1741–1753, 2002     

Morphology and thermal properties of polyhedral oligomeric silsesquioxane/polybutadiene nanocomposites prepared by anionic polymerization

The morphology and thermal properties of Allylisobutyl Polyhedral Oligomeric Silsesquioxane (POSS)/Polybutadiene (PB) nanocomposites prepared through anionic polymerization technique were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The results of XRD, SEM and TEM showed that the aggregation of POSS in PB matrix occurred obviously, forming crystalline domains and the size of POSS particles increased with increasing POSS content. The DSC and TGA results indicated that the glass transition temperature (T _g) of the nanocomposites was significantly increased and the maximum degradation temperature (T _dmax) of nanocomposites was slightly increased compared with pure PB, implying an increase in thermal stability.     

Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetry

The cure kinetics of tetraglycidyl‐4,4′‐diaminodiphenylmethane (TGDDM) and 4,4′‐diaminodiphenylsulfone (DDS) as a cure agent in nanocomposites with multiwalled carbon nanotubes (MWNTs) have been studied with an isothermal differential scanning calorimetry (DSC) technique. The experimental data for both the neat TGDDM/DDS system and for epoxy/MWNTs nanocomposites showed an autocatalytic behavior. Kinetic analysis was performed with the phenomenological model of Kamal and a diffusion control function was introduced to describe the cure reaction in the later stage. Activation energies and kinetic parameters were determined by fitting experimental data. For MWNTs/epoxy nanocomposites, the initial reaction rates increased and the time to the maximum rate decreased with increasing MWNTs contents because of the acceleration effect of MWNTs. The values of the activation energies for the epoxy/MWNTs nanocomposites were lower than the values for the neat epoxy in the initial stage of the reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3701–3712, 2004     

Isothermal crystallization kinetics and melting behaviour of PET/ATO nanocomposites prepared by in situ polymerization

Neat poly(ethylene terephthalate) (PET) and PET/antimony doped tin oxide (ATO) nanocomposites were prepared by in situ polymerization. The study of the isothermal crystallization behaviors of neat PET and PET/ATO nanocomposites was carried out using differential scanning calorimetry (DSC). The crystallization kinetics under isothermal conditions could be described by the Avrami equation. For neat PET and PET/ATO nanocomposites, the Avrami exponent n both decreased with increasing crystallization temperature. In addition, for the same crystallization temperature, the value of n increased with increasing ATO content. These suggested that the crystallization types related to the values of n in the Avrami theory could not be suitable for the crystallization of PET and its nanocomposites. The change of the n values indicated that the addition of ATO resulted in the increase of the crystallizing growth points. That is a heterogeneous nucleating effect of ATO on crystallization of PET. In the DSC scan after isothermal crystallization process, multiple melting behavior was found. And the multiple endotherms could be attributed to melting of the recrystallized materials or the secondary lamellae produced during different crystallization processes. The equilibrium melting temperature of PET in the nanocomposites increased with increasing the ATO content. Surface free energy of PET chain folding for crystallization of PET/ATO nanocomposites was lower than that of neat PET, confirming the heterogeneous nucleation effect of ATO.     

Effect of graphene nanoplatelets as nanofiller in plasticized poly(lactic acid) nanocomposites

Plasticized PLA-based nanocomposites were prepared by melt blending of the matrix with 5 mass% of epoxidized palm oils (EPO) and different amount of graphene nanoplatelets (xGnP). Plasticized PLA (p-PLA) reinforced with 0.3 mass% xGnP resulted in an increase of up to 26.5 and 60.6 % in the tensile strength and elongation at break of the nanocomposites, respectively. Thermogravimetric analysis (TG) and differential scanning calorimetry (DSC) were performed to study the thermal behavior of the prepared nanocomposites. p-PLA reinforced with xGnP shows that increasing the xGnP content triggers a substantial increase in thermal stability. Crystallinity of the nanocomposites as well as cold crystallization and melting temperature did not show any significant changes upon addition of xGnP. However, there is a significant decrease of glass transition temperature up to 0.3 mass% of xGnP incorporation.     

Thermal Stability and Flammability of Polypropylene-Silsesquioxane Nanocomposites

This article presents a study of the thermal stability of polypropylene-based nanocomposites filled with tetrasilanolphenyl silsesquioxane (phPOSS). Nanofillers were introduced into a polypropylene matrix in three different amounts: 2, 5, and 10 wt.%. Investigations were carried out by means of thermogravimetric analyses conducted in inert and oxidizing atmospheres, Fourier transform-infrared spectroscopy, scanning electron microscopy, and flammability UL-94 test. The addition of phPOSS into the polymeric matrix increased thermal stability in comparison to neat iPP and introduced significant changes in the flammability of iPP/phPOSS nanocomposites.     

硅烷功能化石墨烯/硅树脂纳米复合材料的制备与表征

先用乙烯基三甲氧基硅烷(A-171)和二甲肼改性并还原氧化石墨烯(GO),制备A-171功能化的石墨烯(FG).研究结果表明A-171与GO上的羟基发生了反应,以共价键连接到了石墨烯的表面;FG能在四氢呋喃中均匀分散并且剥离成厚度约为0.9 nm的单一片层,其干燥后表面呈褶皱状.然后将FG与双组分硅树脂用溶液共混法制备了FG/硅树脂纳米复合材料.运用X射线衍射、扫描电子显微镜、动态热机械分析、拉伸试验等手段分析了复合材料的形态与性能,结果表明,与未处理过的石墨烯相比,FG在复合材料中有更好的分散和更强的界面作用.含0.5 wt%FG的复合材料的拉伸强度较硅树脂提高了87.7%,玻璃化温度提高了23.9℃,失重5%时的温度也提高了20.1℃.     

环氧树脂/氧化石墨纳米复合物的等温固化行为研究

用示差扫描分析仪(DSC)研究了氧化石墨(GO)对N,N,N',N'-四缩水甘油基-4,4'-二氨基二苯基甲烷环氧树脂(TGDDM)/4,4'-二氨基二苯基砜(DDS)体系的等温固化反应的影响,用X射线光电子能谱仪(XPS)和傅里叶变换红外光谱仪(FTIR)研究了GO上存在的官能团及其对TGDDM/DDS体系固化行为的影响,用热失重分析仪(TGA)研究了天然石墨和GO的热力学稳定性.XPS、FTIR和TGA结果表明,GO上存在的大量羟基、羧基、环氧基等官能团能够影响环氧树脂的固化行为.DSC研究发现,环氧树脂/氧化石墨纳米复合物的固化反应属于自催化类型,随着GO含量的增加,达到最大反应速率的时间不断减小,初始反应速率不断增大,这说明GO对环氧树脂的固化反应有促进作用.Kamal模型计算得到的结果表明,随着GO含量的增加自催化反应初期阶段表观活化能E1先减小再增大,而自催化反应结束后表观活化能E2略微减小.经Kamal模型扩散控制函数修正后,整个固化过程中拟合得到的结果与实验数据相当吻合.以上结果说明,少量的GO对TGDDM/DDS体系的固化反应起着催化作用.     

Thermal and electrical behaviors of acid functionalized MWCNT/ABC-type triblock copolymer grafted-MWCNT nanocomposites

In this work, ABC-type triblock copolymer grafted onto the surface of the MWCNT/acid functionalized MWCNT (MWCNT-COOH) composites were prepared and the properties of nanocomposites were characterized extensively using differential scanning calorimetry (DSC), scanning electronic microscopy (SEM), thermogravimetric analysis (TGA), ac electrical conductivity and dielectrical measurements.

DSC study showed that the glass transition temperatures of the nanocomposites are a some higher than that of the matrix polymer. The increase in oxidized MWCNT in the nanocomposite improved the thermal stability of the composite, according to initial decomposition temperatures. The ac electrical conductivity has increased moderately with increasing frequency, but has increased slowly with increase in the oxidized MWCNT content in the nanocomposites. The electrical conductivity increases slowly with increasing temperature to about the glass transition temperature, then it increases faster. The dielectric constants for the matrix polymer and all the composites decreases slightly with increasing frequency from 0.1 kHz to 2.0 kHz. The dielectric constant increases slightly with increasing temperature up to about the glass transition temperature region and then the increase in temperature is accelerated the increase in the dielectric constant.     

Self assembled graphene/carbon nanotube/polystyrene hybrid nanocomposite by in situ microemulsion polymerization

Self-assembled graphene/carbon nanotube (CNT)/polystyrene hybrid nanocomposites were prepared by water-based in situ microemulsion polymerization. The resulting nanocomposites were used as filler in a host polystyrene matrix to form composite films. An admixture of the two types of carbon fillers provided better improvement in the thermal and mechanical properties compared to the neat polymer. The sheet resistance decreased progressively due to the formation of an extended conjugation network with the CNT bridging the gap between the graphene sheets coated with polymer nanoparticles. The details of the analysis are presented.